Related
can some one help me
I would like to update the rom of my k-jam to this one
K-JAM_WWE_216901_2169101_020710_ship.exe
mi k-jam is italian I think that I should use LokiWiz to upgrade to that rom
after at least 10 try alwais with tge same ERROR [294]: INVALID VENDOR ID
I'm here to ask to some kindfull forum user a step to step howto for rom upgrade
thank
Fixed
I only modify the path in the given bat file given with LokiWiz
I'm upgrading now I hope all will work
How?
Could you be more specific on what you did... I have the same problem with the Dutch T-mobile Rom. I did a CID unlock with Lokiwiz but this didn't fix the problem. PLease help me...
Sounds like you have to do the SIM unlock too..... use the 'U' option.
When I upgraded my ROM I done the following.....
#unlock phone
with no SIM card in phone
copy EnableRapi.cab to phone
run EnableRapi.cab from phone
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
run lokiwiz.bat from PC
select option 'C' unlock CID
phone reboots
add CID to backout bin file names on PC
#install new ROM
uncomress ROM file from zip
click ROM install file
follow instruction
takes 10 minutes
phone reboots
Hope this helps
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
I3aYardo said:
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
Click to expand...
Click to collapse
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
Click to expand...
Click to collapse
I would be very thankful if you could post a link or send me the ROM upgrade Utility needed
best regards
Bayardo
risidoro said:
I3aYardo said:
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
Click to expand...
Click to collapse
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Click to expand...
Click to collapse
Hi risidoro,
I am trying upgrade my O2 German Wizrad G4 version into WWE, I followed your instruction & has used nb2nbf to compile a 2.xx rom without IPL & SPL. When I used the update utility to falsh the Wizard, the utility said something like: Error, this update utility is not for your device. etc.
I think I need to used your modified update utility , can you send it to me?
Also my other question is, when I use nb2nbf , what should I put in the model id for my German Wizard?
You advice can help me & many others to solve our headache in upgrading a G4 Rom! Cheers!
phone_one said:
Hi risidoro,
I am trying upgrade my O2 German Wizrad G4 version into WWE, I followed your instruction & has used nb2nbf to compile a 2.xx rom without IPL & SPL. When I used the update utility to falsh the Wizard, the utility said something like: Error, this update utility is not for your device. etc.
I think I need to used your modified update utility , can you send it to me?
Also my other question is, when I use nb2nbf , what should I put in the model id for my German Wizard?
You advice can help me & many others to solve our headache in upgrading a G4 Rom! Cheers!
Click to expand...
Click to collapse
The modified RUU (ROM Update Utility) is attached.
For ModelID you can use both WIZARD or Prodigy (i used the former).
risidoro said:
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Click to expand...
Click to collapse
sorry to hijack your thread,
just wanted to ask a short question.
if my info is as below:
US T-mobile MDA Vario
IPL 1.03
SPL 1.06
GSM 01.12.10
OS 1.3.13.5
ROM version: 1.3.13.5 ENU
ROM date: 9/29/05
Radio version: 01.12.10
Protocol version: 4.0.13.23
ExtROM: 1.3.13.116
OS 5.1.70(build 14406.1.1.1)
Click to expand...
Click to collapse
does this mean that its on a G3 chip and that i can use lokiwiz03a to CID unlock it and upload any 2.x ROM as i please? and downgrade the ROMs too?
@Bola: you have a 1.x ROM so you can CID unlock your phone with Lokiwiz0.2b (NOT 0.3a). Then you'll be able to install whichever ROM you like.
Bye
I've just published a tutorial that can help those with a G4 or G3 (>= 2.21) CID-Locked device to install whichever 2.x ROM they like.
The tutorial is here:
http://forum.xda-developers.com/viewtopic.php?t=56088
Bye
risidoro said:
@Bola: you have a 1.x ROM so you can CID unlock your phone with Lokiwiz0.2b (NOT 0.3a). Then you'll be able to install whichever ROM you like.
Bye
Click to expand...
Click to collapse
thanks risidoro.
i'll give it a go later.
there wont be any issue downgrading the ROM later would there?
eg if i were to install:
RUU_Wizard_2211301_22113102_021911_DOP_ASIA_WWE_Ship.exe
Click to expand...
Click to collapse
and later back to
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe ?
Click to expand...
Click to collapse
oh, the bootloader (IPL/SPL) doesnt get upgraded either when i upgrade, would it?
oh thank for the help risidoro.
i saw your post after i uploaded mine.
read through your tutorial and i figured that both IPL / SPL will get updated
people like you makes this site great
thanks once again.
Does it need to downgrade SPL/IPL first to version 1.xx ?
When I try to upgrade ROM in my SPV m3000 from ver 2.x to another one ver 2.x I always need to do following tasks:
1. Downgrade IPL/SPL to ver 1.01 using wizBackup tool
2. Afetr that I'm unable to upgrade ROM using ROMUpdateUtility_Wizard_NoID.exe (connection error), I have to restore original ROM ver 1.3.1.15 from SD card (from my backup)
3. After ROM is restored (ver 1.3.1.15, IPL/SPL v1.03), I'm able to upload new ROM (any newer)
But this procedure is too much complicated. Maybe, there is another solution (trikc) to save time.
Thanks in advance
Krzychu
ksalawa said:
Does it need to downgrade SPL/IPL first to version 1.xx ?
When I try to upgrade ROM in my SPV m3000 from ver 2.x to another one ver 2.x I always need to do following tasks:
1. Downgrade IPL/SPL to ver 1.01 using wizBackup tool
2. Afetr that I'm unable to upgrade ROM using ROMUpdateUtility_Wizard_NoID.exe (connection error), I have to restore original ROM ver 1.3.1.15 from SD card (from my backup)
3. After ROM is restored (ver 1.3.1.15, IPL/SPL v1.03), I'm able to upload new ROM (any newer)
But this procedure is too much complicated. Maybe, there is another solution (trikc) to save time.
Thanks in advance
Krzychu
Click to expand...
Click to collapse
- Downgrade to 1.xx rom
- CID unlock the phone with lokiwiz 0.2b (NOT 0.3a!!!)
- Install whichever rom you like
You don't need to repeat the CID unlock every time you change rom. CID unlock is needed only once. Once you have CID unlocked, you can install whichever rom you like by simply running the rom's executable.
bye
Amny thanks,
I did it at the begining (few times - SIM unlock, CID unlock, using lokiwiz0.2b) and I was able to upgrade from my original ROM (1.x) to any other (2.x). But then I was unable to upgrade to another one (2.x) - I got message from RomUpdateUtility about errors in the middle of upgrading.
But from yestarday, this problem disappear, I don't know what happened. I did another few attempts to unclok SID, but using aWizard (enable RAPI then unlock) instead of lokiwiz - maybe I had problem with disabled RAPI - does lokiwiz 0.2b enable RAPI?
Fortunately, right now I don't have such problem
MANY THANKS FOR HELP
ksalawa said:
Amny thanks,
I did it at the begining (few times - SIM unlock, CID unlock, using lokiwiz0.2b) and I was able to upgrade from my original ROM (1.x) to any other (2.x). But then I was unable to upgrade to another one (2.x) - I got message from RomUpdateUtility about errors in the middle of upgrading.
But from yestarday, this problem disappear, I don't know what happened. I did another few attempts to unclok SID, but using aWizard (enable RAPI then unlock) instead of lokiwiz - maybe I had problem with disabled RAPI - does lokiwiz 0.2b enable RAPI?
Fortunately, right now I don't have such problem
MANY THANKS FOR HELP
Click to expand...
Click to collapse
lokiwiz 0.2b and awizard use the very same procedure to CID unlock the phone so both require to enable the RAPI. Maybe you didn't enable it when you used lokiwiz the first time.
Anyway i'm glad that it finally worked! Bye
ksalawa said:
Amny thanks,
I did it at the begining (few times - SIM unlock, CID unlock, using lokiwiz0.2b) and I was able to upgrade from my original ROM (1.x) to any other (2.x). But then I was unable to upgrade to another one (2.x) - I got message from RomUpdateUtility about errors in the middle of upgrading.
But from yestarday, this problem disappear, I don't know what happened. I did another few attempts to unclok SID, but using aWizard (enable RAPI then unlock) instead of lokiwiz - maybe I had problem with disabled RAPI - does lokiwiz 0.2b enable RAPI?
Fortunately, right now I don't have such problem
MANY THANKS FOR HELP
Click to expand...
Click to collapse
lokiwiz 0.2b and awizard use the very same procedure to CID unlock the phone so both require to enable the RAPI. Maybe you didn't enable it when you used lokiwiz the first time.
Anyway i'm glad that it finally worked! Bye
Is SSPL for Breeze anywhere to be found?
I'm having a gzillion problems with 1.29 Radio ROM (from 1.32.251.1_Test update), call drops, data drops, weak signal........
After installing named update I'm unable to install any other due to INVALID VENDOR ID error. Of course I didn't SuperCID my phone... My mteor is QTEK_A07 CIDed.
If there isn't a SSPL for Breeze is there any other way I could force some other Radio ROM in it?
Thanks a lot!
Yes, it works.
You can find further details here http://forum.xda-developers.com/showthread.php?t=282223
No, it does not on my MTeOR...
After starting SSPL-HERM.exe on device it just blanks the screen and locks... I have to remove the battery to restart it.
Check that you are using the HTC MTeoR EnterBL.exe in der RUU directory of this Tool.
SIM CID Unlock V3 has Hermes version inside which doesn't work with MTeorR/Breeze.
so this is what I did:
1. transfer RUU\EnterBL.exe to device
2. run EnterBL.exe on device -- phone restarts and enters BL
3. disable ActiveSync USB connections on PC
4. connect phone with USB cable
5. run RUU\ROMUpgradeUt.exe
and keep getting Error 262 at this point...
SSPL for BREEZE work-around
This will solve INVALID VENDOR ID error, but cannot be used to flash with new RUU Updater which requires SPL 1.10.
1. Copy SSPL-HERM.exe to your Breeze
2. Extract SPL 2.05 from RUU (RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3, you can use WinRAR and dutty's good NBH tool), copy this SPL.nb to the same folder on device as SSPL-HERM.exe
2. start SSPL-HERM.exe with SPL.nb you just copied as parameter AND immediately press POWER and CAMERA buttons.
3. device will enter Bootloader. Screen will say "IPL 1.00 by Des SPL 2.05"
4. Start any RUU on computer, when complains about INVALID VENDOR ID, just restart RUU Updater without touching the device
Enjoy!!!
-- Now I just need to find the way to load Radio 1.38 on my MTeoR...
Just copy ROMUpgradeUt.exe from an older rom version into the directory of your 1.34 ROM and run it. Device will be update with the newer OS.
Secondly run ROMUpdateUtility.exe which is included inside the 1.34 ROM package. So your radio will be updated, too.
MrPhoni said:
Just copy ROMUpgradeUt.exe from an older rom version into the directory of your 1.34 ROM and run it. Device will be update with the newer OS.
Click to expand...
Click to collapse
Yup... did that... and as already people wrote it didn't update the Radio...
Secondly run ROMUpdateUtility.exe which is included inside the 1.34 ROM package. So your radio will be updated, too.
Click to expand...
Click to collapse
Did that too... But with no result... If I start my phone in 1.10 Bootloader ROMUpgradeUt.exe exits with INVALID VENDOR ID. If I start in 2.05 Bootloader, ROMUpgradeUt.exe reports some other error...
As I see it, the solution would be to start the phone with patched 1.10 BL that doesn't check for CID... or somehow SuperCID it...
Hello, did you managed to downgrade radio? I would like to flash original radio version (1.16) to my phone but I'm stuck at 1.34.
nope, still stuck on 1.29
when I flash my t-mobile wing. the RUU shows ERROR [244] INVALID MODEL ID
is there any one can help me?
Thanks in advance
Is your device HardSPL'd?
and don't mind the spam guy. Actually, consider yourself lucky. Very rarely do they choose your post as a spam receptacle
Thanks mate, what do you means "Is your device HardSPL'd?"
IPL: 4.17.0002
SPL: 4.70.YANG
please check. why I can not flash my WING with that ROM
But I can flash my wing with os.nb
what's the problem?
asergs method bypasses the cid lock
check your pm
can you post Aserge solution here please?
aserg's method is an outdated way of flashing a rom. It was used in the earlier roms posted on the forum (like the one jimmysong tried to flash)
to use, you will need to find the cab pack for it. Check some of the older touch-it roms for the cabs (especially the non-wm6.1 ones like touchit 2)
from there, remove the os.nb file. Use nbh extract to extract the windows.nb file from an .nbh file that you get after you download a rom. rename that to os.nb. and place that in the folder that the original os.nb was in.
follow the instructions very closely and TO THE LETTER. When using aserg's method to flash, nothing will happen. Or so it seems. Be patient until the .bat prompts tell you that it's ok to hard reset your phone.
Tmobile Wings error flashing spanish rom
Jimmysong said:
when I flash my t-mobile wing. the RUU shows ERROR [244] INVALID MODEL ID
is there any one can help me?
Thanks in advance
Click to expand...
Click to collapse
Same problem with Tmobile Wing, always gives me this error, i have Hardspl my device it has the 4.70Yang this file is the one i am using HTC_P4350_SPA_4.17.412.2_4.1.13.44_02.94.90_Ship.exe , any help please?
Thanks in advance mates!
Try this;
http://forum.xda-developers.com/showthread.php?t=409425
You can't flash the stock RUU after HardSPL'ing your phone. (You both have HardSPL.) The RUU tries to write over the SPL (which is called HardSPL for a reason...) and it also expects the CID to match the default tmobile RUU.
If you want to go back to a stock ROM you have two options.
Extract the os.nb out of that RUU (which is what Rick GM is talking about) and recreate the NBH without the SPL or use USPL to bypass the CID check.