Someone Please Help Me :) (ExtROM question) - Palm Treo 750 ROM Development

Alright.
Here is what I have done up until now.
I searched this forum trying to find out how to unlock my ExtRom.
I found this http://forum.xda-developers.com/showpost.php?p=1424566&postcount=374
I downloaded the zip files followed the directions and NADA. It keeps giving me some error.
I am a pretty smart cookie. I have been a network engineer for 8 years. I will be more then willing to help someone else out who can help me.
Thanks in advance
David

Just be sure to install the CAB's on the device, and soft reset after every install. Never managed to make it NOT work on my Treo

K i installed both. And did a soft reset after each one.
Now what?

Use Total Commander to empty the ExtendedRom

davestercrombie said:
K i installed both. And did a soft reset after each one.
Now what?
Click to expand...
Click to collapse
launch the unlock sw you find in programs
softreset
delete the files in extrom
softreset
the files in extrom are gone ? ---> hardreset
the files in extrom are still here ----> recheck the previous step(s) and try again

One little question...
works in WM5?

The Solutor said:
launch the unlock sw you find in programs
softreset
delete the files in extrom
softreset
the files in extrom are gone ? ---> hardreset
the files in extrom are still here ----> recheck the previous step(s) and try again
Click to expand...
Click to collapse
That was exactly the pattern I followed about a dozen times, but continued to get 2 different error messages which told me to soft reset and try again every time I tried to launch the extendedROM application in Programs. Since I wouldn't have lost much more time to reflash my 750 if the worst happened, I took the chance of deleting the extendedROM files and partition with the standard File Explorer and hard reset the unit. Now, it's plain vanilla and no hiccups.

I get a error.
Insetkey failed when i run the prgram in the programs.
it says please reset the device then do it again.
I hit the reset button do it again and same error.
Any better ideas?

Do it again 3 or 4 times and more (if you get same message).
Then, you will see the another message.

I did it 100 times reset it I dozen times..
It does not work at all.
Is there another work around???

I got the Extended rom to work, but my questions are such...
what exactly does the extended rom do?
what is the benefits of having extended rom?
and is there a way to have more than 8.57 mb?

davestercrombie said:
I did it 100 times reset it I dozen times..
It does not work at all.
Is there another work around???
Click to expand...
Click to collapse
same here. ran the unlocker many times with reset after each.
first message is "insertkey failed! please reset device then do it again"
followed by "changeprotectiontypefailed. please reset device then do it again"
followed by "unprotect finish! please reset device"
after rest I still see all the 3 stuff and only UMTS in the Band Selection. does this mean it's not unlocked?
I manually deleted the 2 files from the Partition under Extended Rom, using File Explorer.
Am I missing something?
Any help will be appreciated.
Y.

After removing the 2 files from the unlocked ExtROM, should a small 32k filenamed 'ExtROMCopy.exe' remane under the Windows dir? Viewiing its properties from Resco shows the file is in Rom and is Read-only, fwiw.

Jubri said:
One little question...
works in WM5?
Click to expand...
Click to collapse
Anyone managed to get it to work it WM5?

lifes2short said:
That was exactly the pattern I followed about a dozen times, but continued to get 2 different error messages which told me to soft reset and try again every time I tried to launch the extendedROM application in Programs. Since I wouldn't have lost much more time to reflash my 750 if the worst happened, I took the chance of deleting the extendedROM files and partition with the standard File Explorer and hard reset the unit. Now, it's plain vanilla and no hiccups.
Click to expand...
Click to collapse
So are you saying that it is not necessary to do the whole ExtRom unlocker thing??
Using file explorer, I found the files "ExtROMcopy" @ 32.1K but I don't see any way to delete it. I cannot find any type of partition. I also found "AT&T Icons" @82.2K and it is possible to delete that one. Or am I totally missing the boat somehow......

Related

When I try to Format FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed

I have a Qtek9090 with ROM 1.40, radio 1.13
When I try to format my ROM to 128M wit the DOC_Repart tool I got the message FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed, even I can see create and delete into the ExtendRom.
I have tried to install some ship ROM but it doesn't solve my issue.
A friend who get the same Qtek as me doesn't had any trouble when upgrading to WM5. I have sent my Qtek to be repaired a few month ago, could it be modified by Qtek ? Does somebody else get the same issue than me ?
upz
i got the same problem too !!!
stuck with the issue
and using 2005 with less mem
Hi,
got the same error. *duh*
The phone was also sent to qtek for reparation.
Got it working now.
I´ve made a hardreset to install the normal ext_rom.
After that i installed xda-developers_unlocker.cab from wm5_pack_v3 and then resco fileexplorer.
Cause of the german naming of programme (not programs) i couldn´t use the links in startmenu to execute the unlocker.
I used the execute-function in resco fileexplorer to execute the following commands:
\programme\extendedromunlocker\unlockextrom -unlock -xda3 and
\programme\extendedromunlocker\unlockextrom -unhide
Then: soft-reset.
After that i copied the Repart_doc.exe from wm5_pack_v3.
This time it worked without any errors.
this is veri interesting news, i will try again in a min
ehheheh
the using resco to run is one different thing i did not do
so sad, give me hope
hehehe
i just tried this n it did not work also
triplehelix said:
Got it working now.
I´ve made a hardreset to install the normal ext_rom.
After that i installed xda-developers_unlocker.cab from wm5_pack_v3 and then resco fileexplorer.
Cause of the german naming of programme (not programs) i couldn´t use the links in startmenu to execute the unlocker.
I used the execute-function in resco fileexplorer to execute the following commands:
\programme\extendedromunlocker\unlockextrom -unlock -xda3 and
\programme\extendedromunlocker\unlockextrom -unhide
Then: soft-reset.
After that i copied the Repart_doc.exe from wm5_pack_v3.
This time it worked without any errors.
Click to expand...
Click to collapse
thats it!! Im trying to format the extrom of my T-Mobile MDAIII for days now, but this is the solution! u need the tool mentioned here, the extendedromunlocker in EXACTLY this version with the "-xda3" switch ! Any other version of the tool will not work. Dont ask me why, but ive tried them all and ONLY THIS works! a huge thanks triplehelix.
i will attach the .cab for anyone who wasted hours to solve this damn problem!
greets
//edit: sorry for pushing this really old thread, but anyway, i think this will help anyone wo was as desperate as me.
dunno if this helps but, back in my Hima days, the "FL_IOCTL_FORMAT_PHYSICAL_DRIVE" error is due to the extended ROM not unlock & unhide.
you have to run the unlock & unhide procedure to avoid the FL_IOCTL_FORMAT_PHYSICAL_DRIVE error.
really thanks, i have the same problem and with other unlockers can't work, Repart_doc.exe anytime give me this error, next time i format my pda want try this to format my extrom
Still an't working for my XdaIIs....
Can you attach the 'Repart_doc.exe' file...
I can't get my device formated....
hwpeter said:
Can you attach the 'Repart_doc.exe' file...
I can't get my device formated....
Click to expand...
Click to collapse
its located here: ftp://xda:[email protected]/BlueAngel/BA_WM5/Tools/Repart_DOC.exe
have you tried to unhide and then unlock with the "-xda3" switch ?
i use SOTI PocketController to remote control my device. it has a "command line" interface included. here you can type dos style commands. execute the unlocker, inclusive -unlock and -xda3 switch.
for example: \programme\extendedromunlocker\unlockextrom.exe -unlock -xda3
this is the most important line.
this time for me work very well, but have reflashed to italian W2K3 Swisscom 1.40, on this rom Program Files are named Programmi like in any other italian rom, just copied (with resco explorer) the entire folder from "programmi" to a new folder created by myself under device root named "program files" and without any change to original link in windows/start menu/extrom tools are not needed
for me work on first try with this method, and now have missing megabytes of valuable space
all files needed are picked from this thread (except for rom and resco explorer)
still not working
I've tried all the method above... but still not working... I've tried a lot of roms but still... any other sugestions?
Hi guys
I tried everything but I just can't get extended rom to be formated.
Maybe someone as a better idea to solve the problem
Greetings Kapiza

ARGH! Extended rom access - can it be turned OFF...

... WITHOUT a hard reset?
I enabled it, and got a surprise - the Storage Card disappeared from the phone's idea of where it could put things! That immediately voided my custom ring tones and about half of my installed apps, plus I can't install anything NEW on the storage card (as the phone now sees the extended ROM as the only other place!)
Is this reversable or do I have to do a hard reset (and reload EVERYTHINg again!)
Try REMOVING the SD Card, then do a SOFT reset, then reinstert the card. Worked for me.
there is a file here somewhere that disables it again.
Kenji776 said:
there is a file here somewhere that disables it again.
Click to expand...
Click to collapse
I've searched for this but unless you can give us an idea of what it's called or who posted it this could take a while. Anyone got more info than "it's here somewhere" ? :wink:
Hide Extended ROM again
What you are looking for, can be found in the WIKI-Pages!
The program is named EXTENDED ROM UNLOCKER and here is the link:
http://nah6.com/~itsme/cvs-xdadevtools/itsutils/extrom/
You can lock/unlock and unhide/hide the Extended ROM with this tool.
Hope this fits your expectations!
That's nice - its source. No compiler, no go.
Extended ROM UNLOCKER
Don´t know exactly where I found the download.
But the WIKI-pages have been the first station.
After grabbing my harddisk I can attach the file here.
The CAB-file has to be copied to the device and run. The links are placed under Programs/Extrom Tools.
If your folder is not ´Program Files´ (in Germany it´s called PROGRAMMME) you need to change the links or move the folder to the right place.
Sorry - but I didn´t proof the formerly mentioned link. :wink:
Or try this one I got from the WM2005 Upgrade forums...
Simplest solution....
Folks, it's only two registry keys.
Thanks to "Button" I have the answer:
To hide your Ext.Rom2 change these two keys:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
Re: Simplest solution....
melvynadam said:
Folks, it's only two registry keys.
Thanks to "Button" I have the answer:
To hide your Ext.Rom2 change these two keys:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
Click to expand...
Click to collapse
is it editable? or does this just show it? cuz i'm sick of downgrading, editing the rom then upgrading, finding an error, downgrading-edit ext rom - upgrade bla bla bla!

Is there a way to make Storage bigger?

Is there a way to make Storage bigger?
I've an unlocked and clean Extended_ROM folder, is there a way to merger it with Storage like on Magician?
yes u can, but please be aware that by doing this, all your data in extended rom will be permanently erased. please download the file i attach with this msg and follow the instructions:
1. Copy Repart.exe to your device and launch it using file explorer on the pda.
2. Set size of Extended ROM to 128 kb
3. Press "Format now!" and wait until it is done (A few seconds). You will see a message that it is done.
Soft reset.
good luck.
imatrix
Wow, great!
Now I have a Storage about 60Mb!
Thank you, imatrix!
Hi i tried it but i'm getting the following message
FL_IOCTL_FORMAT_PHYSICAL_DRIVR failed.
What should i do ?
THanks
WARNING: IF YOU ARE USING WINDOWS MOBILE 2003(SE), DONT DO THIS, BECAUSE THERE MAY BE IMPORTANT FILES IN THERE STORED BY YOUR OPERATOR.
download the attachment file. install it. then go to start -> Programs -> ExtROM tools -> on your pda, then first run "unhide", then "Unlock". Do a soft reset.
hi. what could i be doing wrong?
i'm on tuma 1.3 already with only 43MB storage. is it possible to get 60MB while still in wm5?
i tried to unhide and then unlock. i'm successful in unhide, but i get an error message "FL_IOCTL_BDTL_HW_PROTECTION - The paramater is incorrect." during unlock.
so i also get a "FL_IOCTL_FORMAT_PHYSICAL_DRIVR failed" error message when i run repart.exe.
btw, i still don't understand how to go back to wm2003se, even after reading so many threads.
EDIT: i may be on the right track. i guess i need to be in wm2003se first to run the two applications, so i have to downgrade from tuma 1.3. i've downloaded the old rom, and extracted it. will go back to it later.
imatrix said:
WARNING: IF YOU ARE USING WINDOWS MOBILE 2003(SE), DONT DO THIS, BECAUSE THERE MAY BE IMPORTANT FILES IN THERE STORED BY YOUR OPERATOR.
download the attachment file. install it. then go to start -> Programs -> ExtROM tools -> on your pda, then first run "unhide", then "Unlock". Do a soft reset.
Click to expand...
Click to collapse
i told ya to read the whole thread before doing it.
imatrix said:
imatrix said:
WARNING: IF YOU ARE USING WINDOWS MOBILE 2003(SE), DONT DO THIS, BECAUSE THERE MAY BE IMPORTANT FILES IN THERE STORED BY YOUR OPERATOR.
download the attachment file. install it. then go to start -> Programs -> ExtROM tools -> on your pda, then first run "unhide", then "Unlock". Do a soft reset.
Click to expand...
Click to collapse
i told ya to read the whole thread before doing it.
Click to expand...
Click to collapse
yes, i now understand i shouldn't use the ExtROM tools in wm2003.
haven't done the downgrade. what do i do now when i'm still in wm5? i still get the error message when i click on "unlock".
if u read up there is a file name xda-developers_Unlocker.CAB which u can download, follow instruction to unlock and unhide the ext_rom then u can re-partition your ext_rom
Cool, so you can reformat in WM5? I thought I had to downgrade... that is if I am reading these post correctly.
afer resizing, u should do a hard-reset to make sure everything running smooth.
i still couldn't use the xda-developers_Unlocker.CAB in wm5 because of the error message when i choose unlock (though unhide worked fine).
i had to downgrade to wm2003se (i completely understand how to do the downgrade now :roll: ).
i'm now a happy camper with tuma 1.3, radio 1.15 and 60MB storage :lol:

HELP I Cant Install any programs (cabs)

When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
The other odd thing is that cant install anything now. I tried to install a cab and I received the "programs was unsucessfully installed". The last program I installed before I noticed this issue was resco. Any ideas, I dont want to try a hard reset. Thanks.
i hjave the same problem!!!!!!!!!!!
Very strange - I have the same issue and it just started today. Installed software won't run and I can't install any cabs. Just says it was unsuccessful.
Anyone?
try downloading pocket mechanics, it shows all programs installed and a clean up tool and see if it shows it there, u can delete them through ur program files....see if that works lettme kno how it goes
Tried soft resetting a few times - nothing. Backed up device to my storage card using Sprite Backup and did a hard reset.
Before restoring I tried to install a cab - worked.
Restoring device now from backup....
After restoration installation of cabs - Unsuccessful. Must be sometime in the registry/system?
My question - what did we do in common to get this problem?
Today I swapped SIM cards with another AT&T phone and then put the original one back. I also ran the JumpSPL1.56KAIS on the device but reset at the tri-color screen due to a lack of time.
It is very frusterating as I dont know what to do. Any since I cant load any programs like pocket mechanics I dont know what else to do. Backups didnt help and I know the ones I had a month back showed the programs listed in the Remove Programs tool. THERE MUST BE A REG HACK THAT WILL FIX THIS! Anyone?
The last programs I installed before this happned was the Resco explorer.
Also I have a activesync issue that started about the same time which I have in another post.
I ended up hard resetting it again and am just re-installing everything.

Freeing up memory

I am trying to free up memory on my Tilt. I have uninstalled all unwanted apps and decided to go directly to my Windows folder to delete unwanted files. I found different cab files and Windows Media files that appear to have been from the original ROM. However, the delete option is disabled for these files. Is there a good utility I can use to delete these files, without having to flash my device with a different ROM.
Thanks in advance
Nope. Those files are in the ROM and you can't remove them from the phone.
Technically you can if you know how to cook your own ROM
Soft reset after Hard reset
Thanks. I have read the trick on how to soft reset the device after hard reset and before the "provider" apps are installed. This worked great for me prior to WM 6.1, but it did not work with the latest 6.1 update. Is there a trick to getting it to work on 6.1, or is that no longer a valid way to get rid of those applications?
atilt said:
Is there a trick to getting it to work on 6.1, or is that no longer a valid way to get rid of those applications?
Click to expand...
Click to collapse
It still works -- you have to be quick. Have the pen in the reset hole and do it the instant after you tap the screen to continue

Categories

Resources