Related
warnning; does not work with g4 wizards!!!!!
this steps are to cid unlock and also to unlock sim in the folowing devices; qtek 9100, i-mate k-jam, mda vario, orange spv m3000, o2 xda mini s, dopod 838, Cingular 8125
first; you must make a full backup of you wizard before doing this , I personally use [wizBackup.exe] posted below for my backups and restores. This is not mandatory but could save an enormous amount of trouble.
I as most people with a wizard with the aku2 rom found out that it cannot be cid unlock with lokiwiz tool, you will get the following;{error:itwritedisk-an internal error occurred}.
. that is till now.
downgrade rom here http://dl.dropbox.com/u/7696581/htc%20wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
note- this steps is for unlocking the cid of the wizard with aku2 rom.
how to cid. unlock all wizard variants ( that have the latest rom build )
first download custom__ruu_wizard_1050412_wwe_101_11210_wwe. rom from the ftp site from the above link, unpack it and just click the romupdateutility_wizard_noid.exe to start downgrading. Simply follow the prompts.
after the rom are loaded go thru the initial setup as you would with any rom.
now download the (lokiwiz02b) from here;
http://dl.dropbox.com/u/7696581/htc wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Make sure you unzip lokiwiz to the root o the c: drive.
please copy the whole lokiwiz folder to the root of the drive,not the contentents of the folder!!!!!
and follow the instructions .do not forget to copy the cab file(enable rapi) to your device and run it before running lokiwiz.
Now run lockiwiz and unlock your machine, your machine will reboot itself. if yoy see an eroot while unlocking that says;
..............................................................................................................................................................................
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
this means that you device not been unloked......try again............
.................................................................................................................................................................................
That’s it your wizard is unlocked. Make sure yew keep the [lock_backup.bin] in a safe place you may need it for guaranty purposes.
Now flash the latest aku2 rom from your provider.- [very important,to avoid future problems wit rom updates]
then u can flash any rom you want.
question: if i cid unlock and sim unlock my phone (after installing custom 1.5 wwe rom) and then i install latest aku2 i-mate italian rom, will the sim unlock (and cid one too) be preserved?
Answer: i can confirm that that upgrading to the latest aku2 rom the wizard remains cid unlocked.
Special thanks to the author of the above cooked rom [button] also to machinagod for the lokiwiz tool and joninla for finding the downgrade rom, molski for is input and everyone that contributed to the cause.
do not try to downgrade using an older wizard rom other than the one posted above it will not work
also this {how to} is for the htc wizard only it may work with other devices but i don’t know, so if you turn you device into a brick do not blame me. use it at your own risk
if you device is from a operator like: 02, orange etc... You will void your guaranty unlocking cid, but don’t despair, if you keep the [lock_backup.bin] file that the lockiz tool generated you can restore cid to factory default.
this proccess only needs to be done once in the wizards lifetime.
Enjoy;
Jose faria.
donate if you like my work
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
maybe if you find an older rom for you device i only have a wizard.take a look at the lokiwiz tread i belive tha someone mentioned the HTC Prophets.
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
Bet I will!!
For the record, your Jamin's rom is the same that was available to download some weeks ago with the Aku2??
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
let me know how you get on.
onesolo said:
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
Click to expand...
Click to collapse
it may be possible,if you have an old custom rom for your device ,found this;
On the one hand, HTC Prophet is a complete copy (both software and hardware are meant) of HTC Wizard. On the other hand, it's equal to HTC Magician in appearance. That is why today review will be quite short, we will only discuss external elements and a new camera, all other aspects were highlighted in the review of HTC Wizard.
http://www.mobile-review.com/pda/review/htc-prophet-en.shtml
Hi Faria, thank you for your HowTo!
Now i know the wizard remains CID unlocked after the upgrade and that's good. I only hope that it stays SIM unlocked too.
Bye
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
sh*t forgot to post the address to the downgrade rom.here it ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
sorry guys
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
faria said:
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Click to expand...
Click to collapse
Hello, could you please tell me what is changed in the custom ROM???
I am willing to do the same thing for the prophet.
Thanks
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
andrew_sh said:
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
Click to expand...
Click to collapse
haaa you have the prophet
dont do that it may turn the prophet into a brick the only way is to find an old custom rom for your device. take a look at the ftp site it may have one there.
sorry
I told you Faria that it can be done
Great that it worked out okay, I can imagine how happy you are feeling right now
Nice how-to by the way.
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
good, really thx~~^_^
The desire is to CID unlock the 8125 so the phone can be Summiter-ized. This was new-in-the-box from Cingular:
ipl 2.25
spl 2.25
GSM 02.25.11
OS 2.25.11.1
I saw faria's post http://forum.xda-developers.com/viewtopic.php?t=47848 but it states this won't work above 2.21.
I believe I can downgrade to the 1.08 original stock image posted in the FTP area, but I'm not certain this will work. I read where someone tried downgrading and the spl remain 2.x and things didn't work out so well. This is where I read it: http://forum.xda-developers.com/viewtopic.php?t=50768&postdays=0&postorder=asc&start=75
The quote directly above is from the lokiwiz0.3 thread http://forum.xda-developers.com/viewtopic.php?t=50768 - but no one's actually confirmed it will unlock Cingular's latest ROM. Folks there just mention up to about 2.21 or so and the thread shifted to talk about the G4 chip and it's challenges.
Has anyone with a new Cingular phone tried lokiwiz0.3? Or how about CID unlocking anything higher than a 2.21 ROM? I'd just try this myself, but I'm stepping a buddy through this remotely. I can carry him all the way with URLs, cool cabs, and tweaks, all I need help with is something I haven't personally had to face - I don't wish to brick his phone.
Thanks for any testimonials!
Is it G3 or G4 phone? If it's a G4 phone then you can not downgrade to 1.x Rom as they don't include G4 bootloader.
kyphur said:
Is it G3 or G4 phone? If it's a G4 phone then you can not downgrade to 1.x Rom as they don't include G4 bootloader.
Click to expand...
Click to collapse
It's G3; there's no trailing decimalization on the ipl / spl.
I have the same ipl/spl, and the unlock tool did not work for me, i would also like to know if its possible to downgrade this rom...
Give it a try.
I think you might need to replace one file, "RUUGetInfo.exe".
Try this:
Download the Cingular 1.8 Rom.
Rename it from *.exe to *.rar
Open the rar and extract the files into an empty folder.
Replace the "RUUGetInfo.exe" file with the attached one.
Run RomUpdateUtility.exe
If everything worked it will think you phone has ver 1.2 Rom so it will allow the 1.8 upgrade.
As always, try at your own risk...
Is this the rom i should be using? ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Im having problems finding the original Cingular 1.8 rom anywhere...
virtualsandwich said:
Is this the rom i should be using? ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Im having problems finding the original Cingular 1.8 rom anywhere...
Click to expand...
Click to collapse
No.. Not CID unlocked, use the Cingular 1.8:
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe
before downgrading to a 1.x rom be sure your IPL/SPL version DOES NOT END WITH .0001
kyphur said:
virtualsandwich said:
Is this the rom i should be using? ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Im having problems finding the original Cingular 1.8 rom anywhere...
Click to expand...
Click to collapse
No.. Not CID unlocked, use the Cingular 1.8:
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe
before downgrading to a 1.x rom be sure your IPL/SPL version DOES NOT END WITH .0001
Click to expand...
Click to collapse
hi friend...
did you manage to unlocke the pda?
faria said:
hi friend...
did you manage to unlocke the pda?
Click to expand...
Click to collapse
If you are asking me, mine has always been CID unlocked, just trying to help the new guys a bit...
kyphur said:
faria said:
hi friend...
did you manage to unlocke the pda?
Click to expand...
Click to collapse
If you are asking me, mine has always been CID unlocked, just trying to help the new guys a bit...
Click to expand...
Click to collapse
haa.. tough it was you
Alright i got it unlocked without replacing RUUGetInfo.exe, i downloaded the 1.8 rom, the phone took it without problem, then Lokiwiz worked like a charm after downgrading the rom. THANKS!
virtualsandwich said:
Alright i got it unlocked without replacing RUUGetInfo.exe, i downloaded the 1.8 rom, the phone took it without problem, then Lokiwiz worked like a charm after downgrading the rom. THANKS!
Click to expand...
Click to collapse
So just to be clear, you had a brand new store bought or telesales Cingular 8125 CID locked with ipl / spl 2.25 and you simply re-flashed it with the stock Cingular 1.08 ROM - and it worked?
If you haven't re-flashed already, would you mind sharing the ipl / spl (and other) versions?
100Tbps said:
virtualsandwich said:
Alright i got it unlocked without replacing RUUGetInfo.exe, i downloaded the 1.8 rom, the phone took it without problem, then Lokiwiz worked like a charm after downgrading the rom. THANKS!
Click to expand...
Click to collapse
So just to be clear, you had a brand new store bought or telesales Cingular 8125 CID locked with ipl / spl 2.25 and you simply re-flashed it with the stock Cingular 1.08 ROM - and it worked?
If you haven't re-flashed already, would you mind sharing the ipl / spl (and other) versions?
Click to expand...
Click to collapse
humm ....yes... i would like to know that to...
Latest G3 Cingular ROM update worked
It works for me too. I just ran lockwiz3.0a to unlock SIM, than downgraded to ver 1.8. Then run lockwiz 2.0b to unlock CID and then install latest custom AKU3.0 ROM. Thanks everyone contributed to that forum.
Work for me. Here's what i did to my new (warranty exchange) 8125 with IPL/SPL 2.25
- unlock SIM lock with Lokiwiz03a
- downgrade to 1.08 with Cingular_RUU_1.8.11.1.WWE.ship.exe
- it now has IPL 1.08 and SPL 2.25
- unlock CID with Lokiwiz02b
- upgrade to PDAMobiz AKU2.3 v120 (the best ROM i've tried so far)
I believe you could skip SIM unlock with Lokiwiz03a and unlock both SIM and CID with Lokiwiz02b after downgrade to IPL1.08/SPL2.25.
dont know why other people in Lokiwiz03a thread said not to do unlock if IPL and SPL are not the same and will brick the phone. may be he had G4 chip.
kanate said:
dont know why other people in Lokiwiz03a thread said not to do unlock if IPL and SPL are not the same and will brick the phone. may be he had G4 chip.
Click to expand...
Click to collapse
G4 phone can't downgrade at all. 1.x Roms do not have G4 Bootloaders.
A few users have had problems when their IPL/SPL versions don't match. So there is the possibility that you will brick your phone.
Did you bother going into the OS on the phone at all after the downgrade to unlock? or did you just connect it to USB and run lokiwiz?
kyphur said:
kanate said:
dont know why other people in Lokiwiz03a thread said not to do unlock if IPL and SPL are not the same and will brick the phone. may be he had G4 chip.
Click to expand...
Click to collapse
G4 phone can't downgrade at all. 1.x Roms do not have G4 Bootloaders.
A few users have had problems when their IPL/SPL versions don't match. So there is the possibility that you will brick your phone.
Did you bother going into the OS on the phone at all after the downgrade to unlock? or did you just connect it to USB and run lokiwiz?
Click to expand...
Click to collapse
Sure thing, you need to sync and go into the OS to install EnableRapi.cab in order to use Lokiwiz02b anyway.
After it's downgraded to IPL1.08/SPL2.25, I let the phone customized itself with all those cingular things and reboot again and install EnableRapi.cab and run Lokiwiz02b to unlock the CID
I have the IPL/SPL 2.25 version of the 8125 ROM.
For some reason, after unlocking with lokiwiz03a, downloading and unpacking etc the 1.8 ROM, i run it and get an ERROR 202: Connection, that it doesn't find my phone
The phone IS connected, synched etc etc. Could this be a problem because I'm running windows vista?
hmm.
edit: with windows xp, I can begin the flash (my 8125 goes to the tri-color, displays IPL and SPL of 2.25, but then the program throws an ERROR 260: UPDATE ERROR, then tells me the recovery steps (it always jsut boots to WINCE after this.)
Anyone know whats up?
Quote:
"Work for me. Here's what i did to my new (warranty exchange) 8125 with IPL/SPL 2.25"
key words being warranty exchange?
or will this work on a brand new one?
just thought I'd ask
and to Clutch: how's the phone now? How exactly does one know of the Ipl/Spl #'s?
I believe as long as it's G3 chip (IPL & SPL don't end with 0001), it should work.
THIS IS NOT A THREAD ON HOW TO UNLOCK YOUR DEVICE
Ok, rather than crapping on Faria's thread, I am going to start a discussion. I am curious about the G4. Yes, I know curiousity killed the cat. So far, reading the forums we have some people with G4's that can upgrade no problem, some that had to CID unlock to get certain roms to load (Faria's), and some that even after CID unlocking the ROMs will not load the extended rom. Personally, I fall in the last category.
Now, here is what had made me curious: So far, most IPL/SPL I have seen posted about is 2.21.0001 for the G4. Mine, on the other hand is 2.25.0001. So, for thos that have G4s, make a post about your IPL/SPL, if you had to CID unlock, HOW you unlocked, and your measure of success. Faria and I were discussing the possiblity that more is tied to the IPL/SPL than on the G3s. Or they are using tighter security. So if we have people with IPLs of 2.21.0001 that can load the full ROM after CID unlocking, and those that have 2.25.0001 that get the OS, but not the extended rom..it gives us a clue.
cptcafne said:
THIS IS NOT A THREAD ON HOW TO UNLOCK YOUR DEVICE
Ok, rather than crapping on Faria's thread, I am going to start a discussion. I am curious about the G4. Yes, I know curiousity killed the cat. So far, reading the forums we have some people with G4's that can upgrade no problem, some that had to CID unlock to get certain roms to load (Faria's), and some that even after CID unlocking the ROMs will not load the extended rom. Personally, I fall in the last category.
Now, here is what had made me curious: So far, most IPL/SPL I have seen posted about is 2.21.0001 for the G4. Mine, on the other hand is 2.25.0001. So, for thos that have G4s, make a post about your IPL/SPL, if you had to CID unlock, HOW you unlocked, and your measure of success. Faria and I were discussing the possiblity that more is tied to the IPL/SPL than on the G3s. Or they are using tighter security. So if we have people with IPLs of 2.21.0001 that can load the full ROM after CID unlocking, and those that have 2.25.0001 that get the OS, but not the extended rom..it gives us a clue.
Click to expand...
Click to collapse
I have a G4
I am
IPL 2.17.0001
SPL 2.17.0001
GSM 02.07.10
OS 2.17.7.2
I am still CID locked, and have not attempted to perform any ROM upgrades yet
I want to CID unlock my device so that i can do a rom backup to the SD card before attempting any kind of ROM upgrades.
How did you unlock your G4 device?
d0ug said:
I have a G4
I am
IPL 2.17.0001
SPL 2.17.0001
GSM 02.07.10
OS 2.17.7.2
How did you unlock your G4 device?
Click to expand...
Click to collapse
Imei website. search for it
imei did it for me
IPL/SPL = 2.17.0001 which means I have a G4.
I ended up paying for unlocking at the imei website but it did the trick and solved my issues where previously i could only get the Mr Clean ROM upgrade to work. Other ROMs would only update the splash screen and the Extension ROM.
Yesterday I successfully updated to Faria's latest RC1 ROM with no issues.
cptcafne said:
Imei website. search for it
Click to expand...
Click to collapse
Thanks, I knew of the site, I just wasnt sure if it was a CID unlock or only SIM unlock. There was a post this morning about it only being a SIM unlock.
I got a CID-LOCKED G4:
IPL 2.21.0001
SPL 2.21.0001
OS 2.26.10.2
GSM 02.25.11
I succesfully installed:
RUU_Molski.Biz_226102_22610105_022511_G4_WWE-30MB
RUU_Molski.Biz_226102_22610105_022511_G4_WWE
Couldn't install:
RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-G4-30MB-CF2
Installer said something about compatibility issues
Didn't dare trying to install Faria new rom yet.
IPL/SPL 2.25.0001
CID locked G4
Extension ROM locked and empty after a failed flash with the official 2.25 ROM on HTC site, can't get anything to install into it. I've since learned to live with it and hope Cingular/HTC will release a newer ROM update that will fix this issue. I'm actually looking into upgrading to a 8525 but those suckers are a bit pricey at the moment so staying with my 8125 for now.
My G4 with bootloader 2.16.0001 had unlock with imei-check.co.uk. You can do it at the same site for 20GBP and U can successfully install any ROM (shipped or custom) without bootloader (I mean IPL/SPL). I recommended to stay in your current latest version of official ROM's bootloader and you will not have any issue.
Nishad
evilito said:
IPL/SPL 2.25.0001
CID locked G4
Extension ROM locked and empty after a failed flash with the official 2.25 ROM on HTC site, can't get anything to install into it. I've since learned to live with it and hope Cingular/HTC will release a newer ROM update that will fix this issue. I'm actually looking into upgrading to a 8525 but those suckers are a bit pricey at the moment so staying with my 8125 for now.
Click to expand...
Click to collapse
That is exactly what happened to me!! Tried the HTC rom, and it killed my extended rom. crap. ok so HTC did this to us. I wonder how many other members tried the "official" rom and it crashed, therefore have not been able to get any extended rom loaded.
Same issue here with the extended ROM and 2.25.0001
The shipped ROM for cingular 8125 would fail.
Had to cook my own ROM and manually put the Extended_ROM folder in root and run the AutoRun.exe from phone to load it.
I was trying to find the way, how to cook a ROM, whitch will work on CID-locked Wizards and I thing: On CID locked phones we can flash only ROMs with nono edited os.nb without IPL/SPL
Example:
I have had a 2.21 ROM a I was able to flash 2.26.10.2 ROM without any changes.
If a decrasing the Pagepool, the the ROM was not working on CID locked
cptcafne,
I am sure you have seen my posts in faria's thread, but I will add my woes to this thread as well.
I have a 2.25.0001 G4 Wizard.
After doing the CID Unlocking through IMEI, I attempted to load faria's beta 4 rom. The ext rom has never installed for me. I think I might have tried installing the rom image from the htc website over the rom that shipped since I thought the HTC rom was newer (I was wrong). I belive this locked my ext rom from the get go. After testing it, I wanted to go back to the cingular 2.25 offcial rom to have a stable base to install the RC1. However, I got when re flashing the 2.25 rom I receive the invalid nb.nkf error message.
If Broken has cooked is own extended rom which has worked on his G4, perhaps a seperate G4 ext rom file is the resolution that faria should seek if there is no success in automating the process in the flash.
I wonder if the locking of the ext rom is an HTC or Cingular thing. Either way I wonder if they have the ability to tell us how to unlock the ext rom?
G4 unlocked by IMEI
IPL/SPL 2.16.0001
Radio 2.47.11
ROM 3.0.0.0 WWE
Faria's 8mb ROM installed without any problems (including the ExtROM) been running OK for about a week and only the occasional soft reset.
Installed over wizard Love 2.26 ROM
hello,
G4 Not unlocked :
IPL/SPL 2.17.0001
No rom upgrade possible
G4 2.17.0001
Qtek 9100
IPL/SPL 2.17.0001
CID unlocked by the IMEI UK site.
Running the latest 3.0.0 RC1 Faria ROM - no issues with the upgrade.
Prior to CID unlock I could only upgrade the splash screen and the ExtROM.
I haven't had the nerve to attempt an IPL/SPL upgrade - not even sure what benefits it would bring.
In this thread (http://forum.xda-developers.com/showthread.php?t=249359&highlight=unlock+extended+rom) there is a way to unlock the extended Rom. However when I do this, all I see is the cingular ext rom files that are installed during the "customization" process. I am wondering if Cingular is in fact locking the ext rom so that no matter what ROM is flashed the ext rom will always contain the Cingular programs and files that were shipped with the phone.
I have yet to see a user with an IPL/SPL of 2.25.0001 be able to install any ext roms.
Jason
fla242 said:
hello,
G4 Not unlocked :
IPL/SPL 2.17.001
No rom upgrade possible
Click to expand...
Click to collapse
are you sure your device is G4????? cuz ipl spl are ends with .001 not .0001
Awais said:
are you sure your device is G4????? cuz ipl spl are ends with .001 not .0001
Click to expand...
Click to collapse
Just to clarify, G4 devices have an IPL/SPL of 2.xx.0001. If the IPL/SPL do not appear in that format when you reset your device than you have a G3 device.
jpryor said:
cptcafne,
I am sure you have seen my posts in faria's thread, but I will add my woes to this thread as well.
I have a 2.25.0001 G4 Wizard.
After doing the CID Unlocking through IMEI, I attempted to load faria's beta 4 rom. The ext rom has never installed for me. I think I might have tried installing the rom image from the htc website over the rom that shipped since I thought the HTC rom was newer (I was wrong). I belive this locked my ext rom from the get go. After testing it, I wanted to go back to the cingular 2.25 offcial rom to have a stable base to install the RC1. However, I got when re flashing the 2.25 rom I receive the invalid nb.nkf error message.
If Broken has cooked is own extended rom which has worked on his G4, perhaps a seperate G4 ext rom file is the resolution that faria should seek if there is no success in automating the process in the flash.
I wonder if the locking of the ext rom is an HTC or Cingular thing. Either way I wonder if they have the ability to tell us how to unlock the ext rom?
Click to expand...
Click to collapse
Yeah, that is what looks like happened. so far from what I seen on the boards, if someone tried to install the HTC Update and it failed, then the ext rom was locked. or even removed, I am not sure.
Jpryor said:
In this thread (http://forum.xda-developers.com/show...extended+ rom) there is a way to unlock the extended Rom. However when I do this, all I see is the cingular ext rom files that are installed during the "customization" process. I am wondering if Cingular is in fact locking the ext rom so that no matter what ROM is flashed the ext rom will always contain the Cingular programs and files that were shipped with the phone.
I have yet to see a user with an IPL/SPL of 2.25.0001 be able to install any ext roms.
Jason
Click to expand...
Click to collapse
Are you sure ? I could have sworn that some members with 2.25.0001 were able to install custom roms completely. Can anyone confirm this for us ?
I have a G4, and the original IPL/SPL was 2.25.0001. I tried all the free options to CID unlock (they worked for SIM unlock), but not worked. So I paid the £20 to IMEI-Check for the unlock key. With that I fully CID unlocked my device.
I installed the stock T-Mobile USA 2.26 ROM, and now my IPL/SPL is 2.26.0001. (I switched carriers from Cingular to T-Mobile, but prefer the 8125's keyboard to the MDA's, so I wanted to keep my existing device.)
Heloo brothers....
I just want to know is there any SPL downrgrading techniqe avilable?
my pda's specification are as follows
ipl 3.08
spl 3.08
gsm 02.19.11
os 2.21.2.6
I am unable to install wm6 nor T -mobile's orginall ruu working is there any way to install 1m6 on my machine...i am new user so i need help plzzzzz.
I want kno the same thing.
Is there a tool to downgrade just the SPL/IPL alone without changing anything else or still downgrading the OS ROM is the only way?
freeyayo50 said:
I want kno the same thing.
Is there a tool to downgrade just the SPL/IPL alone without changing anything else or still downgrading the OS ROM is the only way?
Click to expand...
Click to collapse
there are several tools that will end up by giving you what you want but you must build the RUU yourself.
HOW:
Get an RUU with the IPL/SPL version you want (be carefull with the G3/G4 difference!!!!)
Extract the nk.nbf from the updater and then extract the chunks (you can use my tool or typho5.exe)
Get nb2nbf_tornado.exe and make your own nk.nbf with IPL/SPL only
Pack it again inside an RUU updater and use it to flash
That's it
cheers
PS:
Use the search to feature to learn about "nb2nbf_tornado.exe"
mestrini said:
there are several tools that will end up by giving you what you want but you must build the RUU yourself.
HOW:
Get an RUU with the IPL/SPL version you want (be carefull with the G3/G4 difference!!!!)
Extract the nk.nbf from the updater and then extract the chunks (you can use my tool or typho5.exe)
Get nb2nbf_tornado.exe and make your own nk.nbf with IPL/SPL only
Pack it again inside an RUU updater and use it to flash
That's it
cheers
PS:
Use the search to feature to learn about "nb2nbf_tornado.exe"
Click to expand...
Click to collapse
Or you could flash the lowest T-mobile rom you can find, it should put you back to 1.08 or something like that!!! When i have to downgrade i always get these!!! Then you just upgrade your OS again to what you want and there you go!
I have a HTC Wizard G3. Can I use Button Wizard ROM's SPL/IPL?
I used nb2nbf_wizard.exe to make what's in the attached picture. Does it look correct?
Also, I have nb2nbf_tornado.exe & nb2nbf_wizard.exe...are they the same thing. There both v2.02.
It looks fine to me. post results after, plz
...and check my signature tx
mestrini said:
It looks fine to me. post results after, plz
...and check my signature tx
Click to expand...
Click to collapse
Great!! I deff will.
When using your Wizard Service Tool, if i do Read ROM-->SPL...will this also read the IPL as well??
I want to know so I can just do a Write ROM---->SPL to restore both after I downgrade to SPL/IPL 1.xx.
freeyayo50 said:
Great!! I deff will.
When using your Wizard Service Tool, if i do Read ROM-->SPL...will this also read the IPL as well??
I want to know so I can just do a Write ROM---->SPL to restore both after I downgrade to SPL/IPL 1.xx.
Click to expand...
Click to collapse
nope. IPL is not readable via RAPI/TRUEFFS tools like my tool, only via boot loader and SD card i guess...
mestrini said:
nope. IPL is not readable via RAPI/TRUEFFS tools like my tool, only via boot loader and SD card i guess...
Click to expand...
Click to collapse
Oh ok. Then how would i make a backup of my SPL/IPL. I looked at aWizard, but it doesn't support it.
freeyayo50 said:
Oh ok. Then how would i make a backup of my SPL/IPL. I looked at aWizard, but it doesn't support it.
Click to expand...
Click to collapse
no it doesn't. aWizard is based on same apps as my tool; in fact aWizard is where i got my inspiration from (thanks ahlok_hk )
as i told before, only using mtty and boot loader commands to make a full backup to the SD card, but for that the phone must be CID unlocked
But IPL/SPL are generic so you just grab a RUU updater with same IPL/SPL as yours and you'll have your backup
I extracted these from a OEM Cingular ROM. What are the differences between both sets of SPL/IPL's??
When restoring my SPL/IPL, which set should i use?
Okay, this is where you got to be careful since a pair is for G3 (IPL_1) and the other is for G4 (IPL_2). You don't see it in 1.x ROMs since there were no G4 devices then
cheers
mestrini said:
Okay, this is where you got to be careful since a pair is for G3 (IPL_1) and the other is for G4 (IPL_2). You don't see it in 1.x ROMs since there were no G4 devices then
cheers
Click to expand...
Click to collapse
Wow, thanks for letting me know. I'll make sure to use the IPL_1 for my restore.
Hello!
I would like to relock my Wizard but I don't have the backup of my original CID-Block. Is there a way to relock it?
I have a german G3 Wizard from Vodafone.
Info from Wizard Service Tool: "Key Index: 44"
Please help!
Thank you!
Jan
Cyberdyne said:
Hello!
I would like to relock my Wizard but I don't have the backup of my original CID-Block. Is there a way to relock it?
I have a german G3 Wizard from Vodafone.
Info from Wizard Service Tool: "Key Index: 44"
Please help!
Thank you!
Jan
Click to expand...
Click to collapse
WST allows to CID lock the CID block to any value you'd like; even your own name
You must get the value of your service provider and type it in the text box after selecting the "Write Custom CID" option of "CID Actions" button.
But the most important of all is that the IPL/SPL must be 1.xx!!!
Please report back. tx
Thank you very much! Great info!
I knew about IPL/SPL in version 1.xx to change the CID-block! It's like unlocking the Wizard.
Last question:
What is the correct value for my service provider? It is Vodafone DE. Can I find it with a hex-editor in the original Vodafone ROM?
Thanl you!
Jan
Check this post where i uploaded a file with a list of CID values that i extracted from somewhere (RUU file or some ROM area, can't recall)
http://forum.xda-developers.com/showpost.php?p=1112604&postcount=8
There are at least 3 mentions of Vodafone Germany so i guess you must look somewhere else (also) and cross information. Perhaps ask someone with CID locked G4 device from same provider to read the CID with WST and let you know
that's all i can do.
cheers
A friend of mine has a locked G4 Wizard from Vodafone DE. I will try that! Thank you for your help and your great tool!!!
From your list it could be one of these:
VODAPH01.................German
WIZVDF12.................GER
VODA0501.................GER
One more question to see if I understand it. An other solution could be:
1. Flashing an 1.xx ROM
2. Use WST to change the CID to "VODAPH01" for example
3. Try to flash the original Vodafone ROM
4. If it works: BINGO! Found the right one
5. If I cannot flash the original ROM back to step 2
This should work right?
I am going to read the CID of my friends G4 Wizard and do step 1 to 3 with the right value.
I am so happy! Thanks!
Jan
G3 and G4 have the same CID value?
Sure?
Thank you!
Jan
I'm glad i could help.
Just don't forget to post the final result.
Good Luck
cheers
PS:
Cyberdyne said:
G3 and G4 have the same CID value?
Sure?
Thank you!
Jan
Click to expand...
Click to collapse
Yep. Just the hardware and IPL/SPL change
OK, that was very strange!
The CID of a german Vodafone Wizard100 called VPAcompactII is: WIZVDF12
I flashed the Button's ROM for CID relock.
First I tried to write the new (old) CID with WST v4.2.1 (shame on me). I got the error message that it could not be written because of the G4 SPL.
I could write the CID-block to disk but I could not write it to my Wizard. I was already thinking that I would have to try it with "lockwiz". But finaly I checked the version number and downloaded the new 4.2.2 version.
Second try and everythink looked nice! I could flash the new (old) CID and reading the CID-block showed me that my Wizard is now CID-locked again with the CID WIZVDF12. Very nice!
Than I tried to flash the original Vodafone WM5 AKKU2 ROM. Everything looked good but than my Wizard entered the bootloader. The SPL should have been 1.01 but now it was 1.01.0000!
Just a small shock. Flashing worked fine and now I have CID-locked VPAcompactII with original ROM IPL/SPL 2.21 and everything is fine!
Thank you so much!!!
I thing I noticed: With the Button's ROM 1.xx your WST could not tell the CPU Manufacturer. Now with the Vodafone ROM everything works again and it tells me:
CPU: Texas Instruments - OMAP850
Regards,
Jan aka Cyberdyne
Cyberdyne said:
OK, that was very strange!
The CID of a german Vodafone Wizard100 called VPAcompactII is: WIZVDF12
I flashed the Button's ROM for CID relock.
First I tried to write the new (old) CID with WST v4.2.1 (shame on me). I got the error message that it could not be written because of the G4 SPL.
I could write the CID-block to disk but I could not write it to my Wizard. I was already thinking that I would have to try it with "lockwiz". But finaly I checked the version number and downloaded the new 4.2.2 version.
Second try and everythink looked nice! I could flash the new (old) CID and reading the CID-block showed me that my Wizard is now CID-locked again with the CID WIZVDF12. Very nice!
Than I tried to flash the original Vodafone WM5 AKKU2 ROM. Everything looked good but than my Wizard entered the bootloader. The SPL should have been 1.01 but now it was 1.01.0000!
Just a small shock. Flashing worked fine and now I have CID-locked VPAcompactII with original ROM IPL/SPL 2.21 and everything is fine!
Thank you so much!!!
I thing I noticed: With the Button's ROM 1.xx your WST could not tell the CPU Manufacturer. Now with the Vodafone ROM everything works again and it tells me:
CPU: Texas Instruments - OMAP850
Regards,
Jan aka Cyberdyne
Click to expand...
Click to collapse
All right!
The different CID value must be from the other file being from an old RUU i guess, but I'm so glad it worked out fine in the end.
The issue with the v4.2.1 is natural as the SPL check routine was a bit messy and the 1.xx failing to get info is also natural as the addresses where info is collected differ and most people use 2.xx and higher nowadays
cheers
PS:
Don't forget that you can't flash custom ROMs now