Database Develop

Qtek 9090 flesh over SD Card

I have a nk.nbf + ms_.nbf + radio_.nbf. How can I write this files to my SD Card.
Tnx.

I think you need some tools:
- BaUpgradeUt.exe
- HTCRUU.dll and HTCRUU.conf
- xda3nbftool.exe
- SetOperator.bat or editfix.bat
please refer to http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
if you need explanations.
Hope this help... :roll:

I havn't a cradle !!! I have only FLASH CARD !!! Only flash ! How I can run program from flash?
I runned a "EnterBL.exe" and now I have only "serial" text on my PDA. In my ****ing country I havn't a shop where I can by a cradle.

Whoa... calm down there. I'm not sure that you can even flash from any sort of extending memory..

Try this:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=151
in the end of 1st topic
good luck

I did see this topic. I havn't a work rom on pda How I can write flash to SD Card from PC ? And then boot.

Oh Boy,
just read the topic #1, its all in... :shock:
all you need is a PC with Card Reader, this tool : http://files.pdamobiz.com/ROMs/XDA/ntrw.rar
a Rom Dump (image) with ending *.nb1 for your Device (just search this Forum, its there)
or here:
ftp://xda:[email protected]/Vodafone_VPx_1.22.nb1/Vodafone_VPx_1.22.nb1
and here:
ftp://xda:[email protected]_Updates/OrangeUK_1.40_ROMDump_040805.rar
and here:
ftp://xda:[email protected]/DUMP_QTEK_14000_148_12000_portuguese.rar
- Download ntrw.exe
- Copy ntrw.exe to C:\
- At Dos Command Prompt goto C:
- Type - ntrw write RomDump.nb1 X:
file RomDump.nb1 is the rom name (actually you can assign any word) and X: is Drive of SD Card Reader
- Now, the Rom Image is on your Card - you don´t see it in explorer !!
( don´t format your card now, as windows ask...)
Plug your Card in the Device, go into BootLoader Mode and wait a view seconds.
The BootLoader will ask you what to do.
Flash your Rom and HardReset the Device...
Worked perfect
good luck
sorry about my english

did anybody make the tuma ROM to flash from SD card ???

OK !
Greate TNX.
Now I have a "section=3" error
I think that Land ID error. How I can patch my XDAIIs.nb1 file ?
I have a O2 XDAIIs device.

i have downloaded the portuguese rom above ,it has 2 file radio.nba and os.nba,now when a try to write them to an sd card with ntrw.exe i get thi error,{could not lock xxx.nba---access is denied}
i also have noticed that everyone refers to files extencions like nb1 where this rom comes with nba.could someone please help thank you

I can I install again the original rom in treo 750?

my some friend me prompted and installed a publication WINDOWS MOBILE
of 6 AT&Τ ....
now however I would want to install again WINDOWS MOBILE 5
that I can I install again the original rom in treo 750?
the publication the treo 750 they is unloced gsm

does not know no?? few help does not know I make

Try this post.

thanks
mine treo they is unlocked gsm!!! and no vodafon

bill_2 said:
thanks
mine treo they is unlocked gsm!!! and no vodafon
Click to expand...
Click to collapse
It's not a problem, just make the update via the SD card upgrade.

I can't make update from me it removes this message, exist other does way? the other rom WM5?

all right finally I made this > (I extracted the updater exe. I guess I have to use CHEEIMG_FW.nbh (63,4 MB) and rename it to CHEEIMG.nbh to update/downgrade using minisd card. Am I right?)
There's also cheeimg.nbh but very small (257,3 KB)...
and I wait for it works

how it works?
bill_2 said:
all right finally I made this > (I extracted the updater exe. I guess I have to use CHEEIMG_FW.nbh (63,4 MB) and rename it to CHEEIMG.nbh to update/downgrade using minisd card. Am I right?)
There's also cheeimg.nbh but very small (257,3 KB)...
and I wait for it works
Click to expand...
Click to collapse
hi, did it work? how did you do? what are the lines to follow to upgrade tro the minisd? im fully lost on it... txz....

what you want no? installation the wm5 again?

X1i won't load ROM in bootloader mode

http://forum.xda-developers.com/showthread.php?t=446070
Per the above thread, here is where I am:
Step 1 (preparations)
DONE
Step 2
-I formatted a card with FAT32 ("e:/ fs: fat32") method on XP
-downloaded a ROM from here (Touch-IT Xperience v2.1)
-extracted the files
-renamed the .nbh file "Kovsimg.nbh"
-copied Kovsimg.nbh to the card detailed above
-inserted card into X1i
-powered off X1i
-entered bootloader mode
From there, the 4 color screen comes up and turns white. Phone says it can't find the image. returns to 4 color screen and says "serial" in the bottom color bar. I can pull the battery out and phone reverts. I'm not SUPER technical, so I don't know what I am doing wrong. Any ideas?

get the harspl app and flash it, after that it will get in to bootmode and automaticly flash from your card

Reversedhex said:
get the harspl app and flash it, after that it will get in to bootmode and automaticly flash from your card
Click to expand...
Click to collapse
I already have HardSPL on the phone. That was included in step 1 of the referenced link.

Try it again when the bootloader comes up does it say Olinex xxxx? If not then it didnt flash correctly.
Files are located here also:
http://www.4shared.com/dir/11652560/e8ada30/Sony_Stuff.html
WC
gregnm369 said:
I already have HardSPL on the phone. That was included in step 1 of the referenced link.
Click to expand...
Click to collapse

It did say Olinex!
Hmm... it must not have flashed correctly then. What causes that usually? I'll try again later tonight. Thanks for the heads up, guys!

if it's not finding the image file the hardspl won't make any difference, but it sounds like you've got that stage sorted.
I'm presuming the file isn't named correctly. Double/triple/quadruple check the file name on the card and that the file is on the root of the card. (I managed to get a space into a nbh file today, it didn't pick it up).
How are you copying the file across to the card? double check that its the same size on the card as it is where you downloaded it. However even if it isn't I still think that the bootloader will find it.
Try re-extracting it and copying it again.

fards said:
if it's not finding the image file the hardspl won't make any difference, but it sounds like you've got that stage sorted.
I'm presuming the file isn't named correctly. Double/triple/quadruple check the file name on the card and that the file is on the root of the card. (I managed to get a space into a nbh file today, it didn't pick it up).
How are you copying the file across to the card? double check that its the same size on the card as it is where you downloaded it. However even if it isn't I still think that the bootloader will find it.
Try re-extracting it and copying it again.
Click to expand...
Click to collapse
my EXACT path is "E:/Kovsimg.nbh" where E:/ is my SD card. File is verified on the card as same size as on the computer. I copied it with the drag and drop method between windows on XP.
I'm charging up the phone again to reload HardSPL

Thanks guys! Now running Xperience v2.1 and it is SO much better than stock!

What was the issue? Glad you got it sorted.
WC

phone says no image found when trying to install the new rom update! plz help

everytime i try to install (volume down button + power button) it says "No image found". It really frustrates the living sh*t out of me! i completed everything untill the last step:
* Uncompress the .rar file to get the .image file.
* Rename the .image file to Kovsimg.nbh
* Copy the Kovsimg.nbh file to the top of the SD card.
* Remove the battery for 5 secs (guarantees the phone is turned off).
* Hold down the volume down button, then hold down the power button at the same time.
* After 2-3 secs you'll see the reg/green/blue stripes, then it will go to a light grey background saying "Loading".
after that it says No image found!
someone able to help me?
ive tried the search but i couldnt find anything useful also whats a hardspl and how do i do it

theanimal82 said:
everytime i try to install (volume down button + power button) it says "No image found". It really frustrates the living sh*t out of me! i completed everything untill the last step:
* Uncompress the .rar file to get the .image file.
* Rename the .image file to Kovsimg.nbh
* Copy the Kovsimg.nbh file to the top of the SD card.
* Remove the battery for 5 secs (guarantees the phone is turned off).
* Hold down the volume down button, then hold down the power button at the same time.
* After 2-3 secs you'll see the reg/green/blue stripes, then it will go to a light grey background saying "Loading".
after that it says No image found!
someone able to help me?
ive tried the search but i couldnt find anything useful
Click to expand...
Click to collapse
Did you do a hardSPL that worked then the tricolor should say xxxxx OLINEX
cant you see the name Olinex then hardSPL agian. if that is not the problem check your memory card so it is FAT32 and original sectors (windows format standard)?

theanimal82 said:
everytime i try to install (volume down button + power button) it says "No image found". It really frustrates the living sh*t out of me! i completed everything untill the last step:
* Uncompress the .rar file to get the .image file.
* Rename the .image file to Kovsimg.nbh
* Copy the Kovsimg.nbh file to the top of the SD card.
* Remove the battery for 5 secs (guarantees the phone is turned off).
* Hold down the volume down button, then hold down the power button at the same time.
* After 2-3 secs you'll see the reg/green/blue stripes, then it will go to a light grey background saying "Loading".
after that it says No image found!
someone able to help me?
ive tried the search but i couldnt find anything useful also whats a hardspl and how do i do it
Click to expand...
Click to collapse
The same thing happened to me when I tried to update the Spanish ROM. That is because you are missing ONE step
You need to use NBH Utils to do several things before you get the file you need to rename to "Kovsimg.nbh":
- Download the file you want to use and rename it from *****.image to ****.image.nbh
- Run NBHUtil
- Go to "Extract NBH" tab
- Choose *****.image.nbh
- Now you should see something like this:
Model ID: KOVS*****
Target CID: 11111111
Version: 1.02.932.3
Language: DEU Remember what it says here. Could be something else for you, depending on the language of the file you want to use!
Chunk Size: 64
- Click the "Extract" button next to OS:
- Save it as OS.nb
- Go to "Build NBH" tab
- Select the X1 as model
- Set language to the value you should remember ;-)
- Click on "..." next to OS:
- Select the previously extracted OS.nb file
- Click "Build NBH"
- Save it as "Kovsimg.nbh"

laostia said:
The same thing happened to me when I tried to update the Spanish ROM. That is because you are missing ONE step
You need to use NBH Utils to do several things before you get the file you need to rename to "Kovsimg.nbh":
- Download the file you want to use and rename it from *****.image to ****.image.nbh
- Run NBHUtil
- Go to "Extract NBH" tab
- Choose *****.image.nbh
- Now you should see something like this:
Model ID: KOVS*****
Target CID: 11111111
Version: 1.02.932.3
Language: DEU Remember what it says here. Could be something else for you, depending on the language of the file you want to use!
Chunk Size: 64
- Click the "Extract" button next to OS:
- Save it as OS.nb
- Go to "Build NBH" tab
- Select the X1 as model
Click to expand...
Click to collapse
where is xperia in option?? i cant chose x1, i cant find.
help

laostia said:
the same thing happened to me when i tried to update the spanish rom. That is because you are missing one step :d
you need to use nbh utils to do several things before you get the file you need to rename to "kovsimg.nbh":
- download the file you want to use and rename it from *****.image to ****.image.nbh
- run nbhutil
- go to "extract nbh" tab
- choose *****.image.nbh
- now you should see something like this:
Model id: Kovs*****
target cid: 11111111
version: 1.02.932.3
language: Deu remember what it says here. Could be something else for you, depending on the language of the file you want to use!
Chunk size: 64
- click the "extract" button next to os:
- save it as os.nb
- go to "build nbh" tab
- select the x1 as model
- set language to the value you should remember ;-)
- click on "..." next to os:
- select the previously extracted os.nb file
- click "build nbh"
- save it as "kovsimg.nbh"
Click to expand...
Click to collapse
thanks for taking time and making it clear
it worked for

I had the same problem when i installed my latest rom.
All i had to do was to Hard-SPL and format the micro-sd card as fat32.
Then you copy the kovsimg.nbh file into your memory card.
Easy peasy

By the way...
With all the step above you are only upgrading the OS not the splash images, and the radio...
To update all no need to do thats steps...
All the step no needed just have to rename the file to KOVSIMG.nbh and copy to the root...Not problem to me at all...
But you must remember to have the MicroSD in FAT32 format and use the MicroSd that comes with your xperia...
In some cases the fault is the MicroSD brand...
I have read somewhere the Kingston MicroSd present problems to flash Xperia..But i havent test that either....Dont have a Kingston one...
Only Sandisk...

Please try to use SDHC micro-sd memory card.

FAT32
Yes, MicroSD card has to be in FAT32 format.

Hy
First of all we need to know exactly what org. Xperia (language, brand) you have and the name of Rom you like to flash to your Phone.
Cause you need to know that a phone without hard SPL will not accept other rom than org generic or org. Brand (t-mob, O2, Voda) in org. Language to flash.
If you like to flash WWE rom on a German T-mob Xperia you have to Hard SPL the Phone first! Hard SPL is easy make sure no sd card with a rom on it is in the phone!!!
make sure you flash newest org rom first before flashing a custom rom, to have last Radio on your Xperia.

I had the same problem when I use the 4GB "Hancock-card" (formatted to fat32 off course). So I use the old skool pc->active sync -> usb cable method. That works perfect

How to flash .image file with hardspl?

I just downloaded R3AA010 (generic). The file is APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.image
My X1 is HARDspl. Does this mean I can simply rename that file to kovsimg.nbh and flash it from the memory card? Or do I need to convert it somehow? I read
the tutorial but it says i need to change from .image --->.image.nbh
Can I simply rename the file to kovsimg.nbh and flash it?
Any help would be appreciated!

you can simply rename, i did it and it works fine

DriveBuyB said:
I just downloaded R3AA010 (generic). The file is APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.image
My X1 is HARDspl. Does this mean I can simply rename that file to kovsimg.nbh and flash it from the memory card? Or do I need to convert it somehow? I read
the tutorial but it says i need to change from .image --->.image.nbh
Can I simply rename the file to kovsimg.nbh and flash it?
Any help would be appreciated!
Click to expand...
Click to collapse
This is the way you can flash from your computer (when the X1 is connected via ActiveSync / WMDC)
1. Download X1_CustomRUU.exe and put that in the same directory as your rom.
2. Rename your rom from .image to .nbh (the rest of the name doesn't matter)
3. Execute X1_CustomRUU.exe and follow the steps on the screen.
If you want to use SD-card flashing you have to
1. Rename it to kovsimg.nbh (I don't know if the case is important)
2. Copy to the root of the SD-card (i.e. not in a sub directory)
3. Power off the X1
4. Enter bootloader bij pressing 'volume down' and a little later 'power' until you see a four-colored screen (red / green / blue / white). If everything goes well it will flash automatically