Herald Dialer Cabs - Wing, P4350 Herald Upgrading

Here's a few cabs I altered for the Herald P4350, they should all install straight onto the WM6 WWE RUU Rom and work.
PS. I included 10 Button CommManager aswell, & make sure you soft reset after install.

I like the Touch Dialer. One question: is there a way to see the names ánd the corresponding numbers in the selectionbox?

good work
thanks for the dialer cab for my wing . damn I love this place its like disney world only without walts body in a cryogenic chamber

could you please post screen shots

Screens would be great! Also, does "smart-dial" still work with these cabs?
thanks for your work!

Would installing one of these affect MyFaves call logging?
http://forum.xda-developers.com/showthread.php?t=330337

NotShorty said:
Screens would be great! Also, does "smart-dial" still work with these cabs?
thanks for your work!
Click to expand...
Click to collapse
yes some screen shots would be great

When I try to use the Comm Manager cab, it says I don't have sufficient privledges to install it. What do I need to do?

Thanks for posting those cabs.. exactly what I was looking for when I didn't like the dialer that was already baked into my cooked rom. Hrmm, that sounded kind of weird... oh well.

Related

Here is a TMO Wing Original ROM with TouchFlo added

Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155...h_TouchFlo.zip
Click to expand...
Click to collapse
the linky is broke ...
watcher64 said:
the linky is broke ...
Click to expand...
Click to collapse
Fixed. Thanks
this is specially made for the wing?
Smilez_c said:
this is specially made for the wing?
Click to expand...
Click to collapse
apparently so ... the files downloaded are "WING OEM with TouchFlo"
mmm I'll have to try it later cuz right now i have the Touch-IT,WWE v1.1 UPDATED 10.09.07 I wonder if any significant difference
ok guys im giving it a try.... wish me luck ...
zacwhite15 said:
ok guys im giving it a try.... wish me luck ...
Click to expand...
Click to collapse
good luck............
Bad luck so far ......
looking at a bootloader screen and nothing else ...
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
Click to expand...
Click to collapse
I will try this rom now. But I still think that it is only included the TouchFlo, not the others app?
Is it possible if you cook a new rom based on the Wing OS like the version HERALD_WM6.0_4.17.07.12.PV? I have tried the Touch IT already but it could not compare with the .12.PV in general.
The biggest problem now is keyboard of Wing, it is different than 4350's keyboard. So if we can get the new rom with Wing OS, it is the best!
Thanks in advance!
Downloading now :] from the wifi across the street, this might take a while...
Please post asap guys how this works.
There are several questions I have:
Does this include ANY extra software?
if it doesnt include ANY, then is there a TF manager at least like touchflo 1.1?
Does this have the 6mb page pool applied to it?
It's the base tmob ruu, with touchflo. not bad but still way up on the mem usage since its the official ruu
i got it to install okay but i can't get touchflo started. there are no tf settings. it replaces the left soft key. some of the issues i read about before are apparent like clicking the "x" opens the right soft key.
reinstalling something else. GREAT JOB though and thanks for making this. i'll check it out again next release.
TF Settings are in the Programs Folder. It has the original page pool but, the quick page pool changer will still work. One thing I did notice though, the TF settings aren't checked but it does work for me. If it's not working, open the TF Settings and check 'Enable cube' and 'Enable Scroll'. Also set 'View mode' to 'TF default v4.1'. I'd hate to slim down the ROM and have it missing something that a lot of people use. If you want to customize the cube, open \Windows\BioTouch Settings. I will definitely be fixing a few things so post suggestions here. Don't expect any changes until next week though.
i couldn't find the settings dialouge in any folder. i went into the programs folder where all the programs are usually located (in the start menu) and then into all the subfolders, and couldn't find the settings. They were also not in the program files folder that i reached through file explorer.
Strange. it's all there for me. When I get home I'll flash back to the original RUU. Then reflash my version. Thanks for your input.
Almost the T-Mo ROM with Touch settings
Well it's almost what it says it is. Everything is there except for the basic T-Mo apps like Hotspot log-in, T-Zones and My5. Which isn't a bad thing becuase I don't use any of them, however it is the missing IM program, but again no big deal because that's available in th the forums here. All in all, so far I'm impressed.
is the keyboard layout correct??..other then that there will be no other reason to switch because some how i kept all my t-mobile files when i flashed to the touch it rom
Just a question. When i reflash, i normally cut out the customizing part. Is the touch-flo function a component of the "Customizing" function after a hard reset?

TOUCH FLO + HTC CUBE on HIMALAYA WM6 TOF

hello...
i am really sorry... but my head is starting hurt right now...
i'm usually good with following instructions but this time, i need help...
i got the alpha touchflo working on my Hima (PH10b) wm6 tof fresh... FTOUCHFLO (scrolling left/right up/down all good)
i've been trying to figure out how to try out the real HTC Cube on the device...
there are so many versions and i can't figure it out... sorry...
if anyone would be so kind enough to laydown the step by step procedures and post the cabs or installers on how to do it, i'd be very grateful!
believe me i tried... but right now.. i ended up HR the device because of too much junk on it..
HELP...
my money would prob be on this one
http://forum.xda-developers.com/showthread.php?p=1565744#post1565744
Rudegar said:
my money would prob be on this one
http://forum.xda-developers.com/showthread.php?p=1565744#post1565744
Click to expand...
Click to collapse
i'm using this and it works seemlessly on the Hima..
just need info on where to download the cube, and how to install it on the hima
Touchflo Cube
I see a few devices with the Touchflo cube working onnit (Youtube)
Itll be great to get it working on Hima!!!
Hope someone cracks this one!!!
http://www.youtube.com/watch?v=pB8O_xSzdBE&mode=related&search=
Cube on the Wizard.looks awesome!
ByKa's flash cube is great now, only taking 98kb memory and charging CPU not more than 2%
Bingoig11 said:
ByKa's flash cube is great now, only taking 98kb memory and charging CPU not more than 2%
Click to expand...
Click to collapse
I believe this cube is still maturing, actually faster than Byka himself.
I'm very curious what Slither's cube will bring...
A link to post for Slither's cube Maggy?
Edit: Found it with a little search, indeed, it promises to be great!
Slither's Cube!
Slithers cube is coming on nicely!
I have installed it on my device! The transition etc is great! Smooth!
It basically gets updated everyday!!!!
Im sure we should have a HTC Cube working soon!!!
Keep your fingers crossed!!
Indeed, I checked on Slither's topic, sounds great!
Think I'm gonna uninstall my Byka's cube and install both efrost TouchFlo and Slither's cube to test that!
Just hope that I'll have enough space on my device
Touchflo running
Hi,
I installed efrosts touchflo_a4. But I can't seem to get it running.
When I calibrate it, I see in the middle on top the "L" & "S".
And then???
I also copied the latest files of Viijay, but it does not seem to work, anyone help??
Thread
Bazzz66 said:
Hi,
I installed efrosts touchflo_a4. But I can't seem to get it running.
When I calibrate it, I see in the middle on top the "L" & "S".
And then???
I also copied the latest files of Viijay, but it does not seem to work, anyone help??
Click to expand...
Click to collapse
Hi!
Follow this thread!
You need to still install the cube file
http://forum.xda-developers.com/showthread.php?t=336234
There it says exactly howto! Im sure this cube is going to rock our devices!!
They busy with it!
Cheers
Yep it works now, tnx
Tnx ^^rac,
I got it working, I noticed I installed flashlight to \RAMdisk instead of directly on the device. So I changed the path in the text file.
TouchFlo hangs everytime I try to calibrate, but it works. So I think it is fine.
However TouchFlo does not start the cube if I do not start flash manually, after that it goes perfect. Any suggestions...
I bought Qtek 2060 yesterday, is it possible to run touchflo in it? pls answer , thanks

dialer cab?

anyone have the cab file for the dialer thats in hyperdragons new rom? my friend saw my dialer in the rom and he wants it
i would really love to see this too. its called PhoneCanvas. i have the OEM but i dont know what registry keys i would need to make it a cab...
anyone wanna help?
kidnamedAlbert said:
i would really love to see this too. its called PhoneCanvas. i have the OEM but i dont know what registry keys i would need to make it a cab...
anyone wanna help?
Click to expand...
Click to collapse
All the registry keys needed should be in the RGU file. I think it needs more then the PhoneCanvas though, probably the _409 folder along with some other .dll's to work properly.
Just my two cents.!
yeah i made a cab and it doesnt install. maybe i should put whatever is the in _409 folder...
canvas are just a part of it.
could u post screenshots or links to PICs of that dialer?
i've been fighting with dialers for few days, gathered some info on the way. i'll tell u what to send and will give it a try tomorrow.
papo said:
canvas are just a part of it.
could u post screenshots or links to PICs of that dialer?
i've been fighting with dialers for few days, gathered some info on the way. i'll tell u what to send and will give it a try tomorrow.
Click to expand...
Click to collapse
If its the dialler in the screenshots for HyperDragon Manila2D version its the opal dialler and its a bit more complicated than just a skin coz there are sliding menus and a slider for ignoring the call.
I've been looking for this cab also. I had the Hyperdragon rom but I couldn't get my MMS working so I switched to NATF 2.2 and it's been great. I just would like a different dialer than the standard ATT one.
kidnamedAlbert said:
i would really love to see this too. its called PhoneCanvas. i have the OEM but i dont know what registry keys i would need to make it a cab...
anyone wanna help?
Click to expand...
Click to collapse
previous dialer was made by 3 oems
PhoneCanvas, Smart Dialing and VideoTelephony
these dlls been responsible:
ddcall.dll
DPadMenu.dll
phcanhtc.dll
phcanOverbmp.dll
phcanrc.dll
smartdialing.dll
HTC3GVT.dll
HTC3GVTStack.dll
VTKey.exe
contactcmd.exe
and 200 of pics and wav
check these dlls and if it's the same, will give u list of reg & bmps to grab
but rgu would help too. could u get it?
papo said:
previous dialer was made by 3 oems
PhoneCanvas, Smart Dialing and VideoTelephony
these dlls been responsible:
ddcall.dll
DPadMenu.dll
phcanhtc.dll
phcanOverbmp.dll
phcanrc.dll
smartdialing.dll
HTC3GVT.dll
HTC3GVTStack.dll
VTKey.exe
contactcmd.exe
and 200 of pics and wav
check these dlls and if it's the same, will give u list of reg & bmps to grab
but rgu would help too. could u get it?
Click to expand...
Click to collapse
here is the rgu from opal phonecanvus 0409
herg62123 said:
here is the rgu from opal phonecanvus 0409
Click to expand...
Click to collapse
you will find it as oem in niki kitchen
BR
herg62123 said:
here is the rgu from opal phonecanvus 0409
Click to expand...
Click to collapse
ok, that's just phone canvas. you will need at last those 2 other.
i would search through all rgus on phone for Smart Dialing and VideoTelephony. but it's not worth the time when there already is oem.
Here's Opal Phone Canvas (Dialer 2G) tested on Romeos 4.6.0
I've started fresh, and had problems installing my cab it with phcanOverBMP.dll included even when it's not installed on the ROM.
So I've made two cabs one with it included one without, if you have phcanOverdmp.dll installed, you should be able to rename it and copy the new one over the top. Then install the cab with it missing.
If somebody knows how to fix the cab with it included, could you please fix it as i'm not sure what to do.
Excellent job, wonderfull!
Just make sure u skin the call history icons as well
Edit: I cannot not uninstall it for some reason.
I'm guessing the reason it doesn't uninstall is that the dll's the the cab are in use and windows can't remove them while they are loaded.
Ring and Vibrate Stops
I love this dialer but installed on Hyperdragon III (see my signature) and lost volume and vibrate. Plus, I wasn't able to uninstall it. had to do a hard reset to get them back. Am I alone with this?
Any chance of a black skin version of this?
fultotop said:
Fixed call log skin ...
Click to expand...
Click to collapse
Could I ask you also skin the received/dialed/missed call icons as well? I hope it's not too much to ask.
P.S. Re-confirmed: cannot be uninstalled, u need to hard reset to change it.
dani31 said:
Could I ask you also skin the received/dialed/missed call icons as well? I hope it's not too much to ask.
P.S. Re-confirmed: cannot be uninstalled, u need to hard reset to change it.
Click to expand...
Click to collapse
had same issue. and it didn't matter if it was installed before or after any other customizations were made.
@ dani31 & wireless_one
I've made some changes above, and phcanOverbmp.dll includes the call log icons.
I'm sort getting tried of all the hard reset's that I've done in the last few days and it seems to work fine on my Romeos 4.6.0 apart from the dialpad sounds, but they are not included in the phonecanvas package so I removed them from the cabs.
fultotop said:
@ dani31 & wireless_one
I've made some changes above, and phcanOverbmp.dll includes the call log icons.
I'm sort getting tried of all the hard reset's that I've done in the last few days and it seems to work fine on my Romeos 4.6.0 apart from the dialpad sounds, but they are not included in the phonecanvas package so I removed them from the cabs.
Click to expand...
Click to collapse
thanks for the effort! might be a manila issue and won't work unless cooked in. I love the dialer but if I can't hear the phone ring, defeats the purpose of the phone (and all the cool ringtones I've created! )

*New Reg Tweak Cab**

This cab will turn your program's folder from 3 column to 4 column. Just install the .cab and reset and your in buisness..
Nice. I like it a lot. Thanks for sharing.
Is this like Scotchua's Cab that does the similar thing?
Looks Good Though!
JimmyMcGee said:
Is this like Scotchua's Cab that does the similar thing?
Looks Good Though!
Click to expand...
Click to collapse
It's actually exactly like mine, but I don't mind sharing the credit I'm sure he stumbled across the fix the same way I did.
I will warn everyone, this does not work on every rom, but it's AWESOME for the ones that do I actually have it as part of my UC.
Yup doesn't work on Dutty's ROM
works fine on L26 Throttlelauncher beta6.0 ROM.
Many thanks!
do you need to reboot device or soft reset? not worked on a reboot on orange uk wm6.1 cab opp version 24.328.1.610 rom 3.28.61.0 wwe 05/02/08 radio 1.65.16.25 protocol v 25.83.40.02h
any ideas?
Hi do you have this tweak that can work om WM 6.1?
thanks in advance
scotchua said:
It's actually exactly like mine, but I don't mind sharing the credit I'm sure he stumbled across the fix the same way I did.
I will warn everyone, this does not work on every rom, but it's AWESOME for the ones that do I actually have it as part of my UC.
Click to expand...
Click to collapse
I stumbled across the settings and just made the cab. I didnt realize you had done this already. Sorry if i walked on top of you.
You need to reset after.
Im using hyperdragon III pro 6.1 works fine
reset via little button next to the usb port cab did not work
Cool tweak - thanks for sharing!
No AT&T ROMS
scotchua said:
It's actually exactly like mine, but I don't mind sharing the credit I'm sure he stumbled across the fix the same way I did.
I will warn everyone, this does not work on every rom, but it's AWESOME for the ones that do I actually have it as part of my UC.
Click to expand...
Click to collapse
I've downloaded and installed/uninstalled both versions of this with the stock AT&T 6.1 ROM with no bloatware. Neither version works, which bums me out.
jpcrailjr said:
I've downloaded and installed/uninstalled both versions of this with the stock AT&T 6.1 ROM with no bloatware. Neither version works, which bums me out.
Click to expand...
Click to collapse
One of these days we will get to the bottom of why Reg Cab and Changes don't stick on Stock Roms.
KD8DNS said:
I stumbled across the settings and just made the cab. I didnt realize you had done this already. Sorry if i walked on top of you.
Click to expand...
Click to collapse
absolutely nothing to be sorry for. i don't own the knowledge. thanks for sharing
Works perfect on ... see signature.
JimmyMcGee said:
One of these days we will get to the bottom of why Reg Cab and Changes don't stick on Stock Roms.
Click to expand...
Click to collapse
I'm at work, I have 6 tilts on my desk, here is the break down.
ATT 6.0--does not work
ATT 6.1--does not work
HDPROIII--works
L26---works
L26 Throttle--works
NATF--Dosent work
When I say dosent work im talking about the CAB file,
However if i edit the reg manually and reset, it works. Im at a complete loss.
KD8DNS said:
I'm at work, I have 6 tilts on my desk, here is the break down.
ATT 6.0--does not work
ATT 6.1--does not work
HDPROIII--works
L26---works
L26 Throttle--works
NATF--Dosent work
When I say dosent work im talking about the CAB file,
However if i edit the reg manually and reset, it works. Im at a complete loss.
Click to expand...
Click to collapse
I'll cook this into my next ROM and see how it goes. Thanks to both of the posters...
Does it work on the Settings pages also?
NotATreoFan said:
I'll cook this into my next ROM and see how it goes. Thanks to both of the posters...
Does it work on the Settings pages also?
Click to expand...
Click to collapse
Im working on that now.
KD8DNS said:
I'm at work, I have 6 tilts on my desk, here is the break down.
ATT 6.0--does not work
ATT 6.1--does not work
HDPROIII--works
L26---works
L26 Throttle--works
NATF--Dosent work
When I say dosent work im talking about the CAB file,
However if i edit the reg manually and reset, it works. Im at a complete loss.
Click to expand...
Click to collapse
Interesting,
NATF's Rom Is "almost" a ATT stock ROM.
I'm curious as to whether this doesn't work on HTC stock ROMs.
NATF or KD8NS do you know if there is some sort of CAB Security Reg setting that could be causing this?

HD Contacts

Does anyone have just a hd or qaurtz contact cab that i can install on the normal tf3d? Ive tried other tf3d versions but otheres have small problems.
Thanks
here you go. Should work fine with most of the TF versions....
thank you very much!
works perfect
Is the attached cab a black Contact page? Is there even a white version? Or doesn't it matter and it will adopt the same sort of colours I have in TF3D
can someone post a photo to see how the contact tab will be, after installing this cab?
Doesn't work on my diamond! I have the 2.03 rom with the first TF3D.
Need to do a hard reset now, because unsinstalling the old TF3D doesn't work
xavierdemon said:
Is the attached cab a black Contact page? Is there even a white version? Or doesn't it matter and it will adopt the same sort of colours I have in TF3D
Click to expand...
Click to collapse
I'm not sure but it has worked with all the rest of the tweaks i used.
equi said:
can someone post a photo to see how the contact tab will be, after installing this cab?
Click to expand...
Click to collapse
Theres one attached is slightly blurry
Rones said:
Doesn't work on my diamond! I have the 2.03 rom with the first TF3D.
Need to do a hard reset now, because unsinstalling the old TF3D doesn't work
Click to expand...
Click to collapse
I also use 2.03 rom and remeber to have net 3.5 installed and turn off tf3d then install.
Thanx for the cab works great
Installed cab after switching off TF3D as advised
Hmmm, didn't work for me - I have Net 3.5 and 1.93 official rom.
my touchflo stop working after this.
it got stock and i dont know what to do :S
mine didnt show anything in the people tab lol funny
phone has gone really slow now!!!!! freezes too!!!
not good
Please remember to follow the steps for it to work and also he said itmight not work on all tf3d but most.
Did not work for me, i have 1.93 ROM stock. I have net 3.5 installed, turned off TF3D, rebooted my device, installed cab, rebooted again, turned on TF3D and now it seems that the People tab is messed up. Everything else works fine but the People Tab, its almost as if it is missing a file.
Lucky for me, I uninstalled the cab and it reverted back to normal.
works fine for me!
stopped TF3D, installed it and started up TF3D again, didnt even need a reboot. Ive got the ATT Fuze/Touch Pro, stock Rom
Can it works on SENSE 2.5?

Categories

Resources