hello...
i am really sorry... but my head is starting hurt right now...
i'm usually good with following instructions but this time, i need help...
i got the alpha touchflo working on my Hima (PH10b) wm6 tof fresh... FTOUCHFLO (scrolling left/right up/down all good)
i've been trying to figure out how to try out the real HTC Cube on the device...
there are so many versions and i can't figure it out... sorry...
if anyone would be so kind enough to laydown the step by step procedures and post the cabs or installers on how to do it, i'd be very grateful!
believe me i tried... but right now.. i ended up HR the device because of too much junk on it..
HELP...
my money would prob be on this one
http://forum.xda-developers.com/showthread.php?p=1565744#post1565744
Rudegar said:
my money would prob be on this one
http://forum.xda-developers.com/showthread.php?p=1565744#post1565744
Click to expand...
Click to collapse
i'm using this and it works seemlessly on the Hima..
just need info on where to download the cube, and how to install it on the hima
Touchflo Cube
I see a few devices with the Touchflo cube working onnit (Youtube)
Itll be great to get it working on Hima!!!
Hope someone cracks this one!!!
http://www.youtube.com/watch?v=pB8O_xSzdBE&mode=related&search=
Cube on the Wizard.looks awesome!
ByKa's flash cube is great now, only taking 98kb memory and charging CPU not more than 2%
Bingoig11 said:
ByKa's flash cube is great now, only taking 98kb memory and charging CPU not more than 2%
Click to expand...
Click to collapse
I believe this cube is still maturing, actually faster than Byka himself.
I'm very curious what Slither's cube will bring...
A link to post for Slither's cube Maggy?
Edit: Found it with a little search, indeed, it promises to be great!
Slither's Cube!
Slithers cube is coming on nicely!
I have installed it on my device! The transition etc is great! Smooth!
It basically gets updated everyday!!!!
Im sure we should have a HTC Cube working soon!!!
Keep your fingers crossed!!
Indeed, I checked on Slither's topic, sounds great!
Think I'm gonna uninstall my Byka's cube and install both efrost TouchFlo and Slither's cube to test that!
Just hope that I'll have enough space on my device
Touchflo running
Hi,
I installed efrosts touchflo_a4. But I can't seem to get it running.
When I calibrate it, I see in the middle on top the "L" & "S".
And then???
I also copied the latest files of Viijay, but it does not seem to work, anyone help??
Thread
Bazzz66 said:
Hi,
I installed efrosts touchflo_a4. But I can't seem to get it running.
When I calibrate it, I see in the middle on top the "L" & "S".
And then???
I also copied the latest files of Viijay, but it does not seem to work, anyone help??
Click to expand...
Click to collapse
Hi!
Follow this thread!
You need to still install the cube file
http://forum.xda-developers.com/showthread.php?t=336234
There it says exactly howto! Im sure this cube is going to rock our devices!!
They busy with it!
Cheers
Yep it works now, tnx
Tnx ^^rac,
I got it working, I noticed I installed flashlight to \RAMdisk instead of directly on the device. So I changed the path in the text file.
TouchFlo hangs everytime I try to calibrate, but it works. So I think it is fine.
However TouchFlo does not start the cube if I do not start flash manually, after that it goes perfect. Any suggestions...
I bought Qtek 2060 yesterday, is it possible to run touchflo in it? pls answer , thanks
Related
Here's a few cabs I altered for the Herald P4350, they should all install straight onto the WM6 WWE RUU Rom and work.
PS. I included 10 Button CommManager aswell, & make sure you soft reset after install.
I like the Touch Dialer. One question: is there a way to see the names ánd the corresponding numbers in the selectionbox?
good work
thanks for the dialer cab for my wing . damn I love this place its like disney world only without walts body in a cryogenic chamber
could you please post screen shots
Screens would be great! Also, does "smart-dial" still work with these cabs?
thanks for your work!
Would installing one of these affect MyFaves call logging?
http://forum.xda-developers.com/showthread.php?t=330337
NotShorty said:
Screens would be great! Also, does "smart-dial" still work with these cabs?
thanks for your work!
Click to expand...
Click to collapse
yes some screen shots would be great
When I try to use the Comm Manager cab, it says I don't have sufficient privledges to install it. What do I need to do?
Thanks for posting those cabs.. exactly what I was looking for when I didn't like the dialer that was already baked into my cooked rom. Hrmm, that sounded kind of weird... oh well.
Edit: 18Oct07
It works now
Thanks to Slither2006
Just folw 1st. post instructions in that link
http://forum.xda-developers.com/showthread.php?t=336234
Congeratulatios
-----------------------------------
03Oct07
Dear All
I keep looking & serching for a way to make Touch Flo working on our Himalaya.
I hv been tald by several freinds here that processer OMAP is the one 4 Touch Flo
But
I found in this thread for Atom Microprocessor: 32bit Intel XScale PXA272 @ 416MHz
It is working see here
http://forum.xda-developers.com/showthread.php?t=333513&page=3
and the customization from here
http://forum.xda-developers.com/showthread.php?t=325424
I tryed but the result is black screen
Is there is any explanation why we can not hv it working on Himalaya?
Some screen Captures
Regards
see here please: http://forum.xda-developers.com/showpost.php?p=1556253&postcount=33
" I found out why I got blackscreened.
I disabled SNApi and Certification Enrollment.
Works great now. PS: Totally Incompatible with HTC Home. Do NOT install HTC Home AFTER installing Touchflo, or the moment you attempt to use Home or access the Home themes, it will hang.
Oh well, I intended to uninstall HTC Home anyway. I just found out that having it on tends to prevent WM5torage from running correctly. "
I hope this may help you...
Test it!
Did someone test it??
How is the transition speed??
Hope this works!
mrDev said:
see here please: http://forum.xda-developers.com/showpost.php?p=1556253&postcount=33
" I found out why I got blackscreened.
I disabled SNApi and Certification Enrollment.
Works great now. PS: Totally Incompatible with HTC Home. Do NOT install HTC Home AFTER installing Touchflo, or the moment you attempt to use Home or access the Home themes, it will hang.
Oh well, I intended to uninstall HTC Home anyway. I just found out that having it on tends to prevent WM5torage from running correctly. "
I hope this may help you...
Click to expand...
Click to collapse
Unfortiounatly did no help
R u using WM5?
Thanks & Regards
Hi there,
How to disable SNApi and Certification Enrollment?
Thanks.
Bingoig11 said:
Hi there,
How to disable SNApi and Certification Enrollment?
Thanks.
Click to expand...
Click to collapse
Use taskmanager
Services
long press on SNApi and Certification Enrollment to show menu
Disable
The_hesham said:
Use taskmanager
Services
long press on SNApi and Certification Enrollment to show menu
Disable
Click to expand...
Click to collapse
Hey!
The_hesham, did you get the touchflo to work??
^^rac said:
Hey!
The_hesham, did you get the touchflo to work??
Click to expand...
Click to collapse
No only black screen
I did all as mrDev mention
It's work with me after I did many rest
The_hesham said:
Use taskmanager
Services
long press on SNApi and Certification Enrollment to show menu
Disable
Click to expand...
Click to collapse
Ok thanks a lot, I already had the TM but did not had a look in it, I found both services.
I'm going to free space on my device and test
Touchflo is taking near to 12Mb on my device!
Just installed it...It still doesn't work, black screen, nothing happens
So far the next best thing I found are:
ByKa's flash cube
http://forum.xda-developers.com/showthread.php?t=328010
with PocketCM and PocketCM keyboard
http://pocketcm.com/index.php
and I hope Oto One Touch Organiser will soon run on my device as well
http://www.adidap.com/projects/oto
Both ByKa and Quentin from PocketCM are working on image viewers with similar interfaces
Another program that fits this kind of interface quite nicely is Igo navigator. It starts slow on my Hima, but then locks on GPS real fast and creates a perfect log even in areas with no roads. It sometimes does create strange routes, but allows easy manual corrections. This only works good if you know the area.
Any more suggestions?
Look what ive found http://forum.xda-developers.com/showthread.php?t=334965
ather90 said:
Look what ive found http://forum.xda-developers.com/showthread.php?t=334965
Click to expand...
Click to collapse
Yes, I found it too, been watching that thread from the beginning, just 5 days ago, and now already he launched a fully working alpha! Great work. Efrost rules.
Caution, it is still an alpha and does interfere with normal behaviour of other programs, like the ones I mentioned yesterday.
Maggy said:
Yes, I found it too, been watching that thread from the beginning, just 5 days ago, and now already he launched a fully working alpha! Great work. Efrost rules.
Caution, it is still an alpha and does interfere with normal behaviour of other programs, like the ones I mentioned yesterday.
Click to expand...
Click to collapse
Bingoig11, mention it works with Himalaya in that thread
http://forum.xda-developers.com/showthread.php?p=1579520#post1579520
Bingoig11 said:
Nice job efrost, works great on my Himalya!
Click to expand...
Click to collapse
But it did not work with me!!
Yeah it didnt work wid me too..when i run it i sucessfully calibrate it..but after that i cant use my stylus on the screen only Dpad works..even the Start buton doesnt click...i guess its not designed to work with Himas YET !!
I can't imagine bingoing11 is joking/lying/pulling our legs/not knowing which device he has?
lolz good one maggy...i was wondering the samething
I had no problem to install it
Once installed, the calibration procedure launched, I just had to lauch it 2 times since the first time I didn't calibrate the screen correctly.
Once configured, I tapped on the scrollbar quickly and then play with my finger, and that's all!
This is just a habit to take, I confess that the scroll with finger manipulation is a little bit touchy to learn but it works correctly
are u sure u have a PH10B Device
Kaiser Touchflo Development Alpha beta testing {duttythroy,Raven_coda & Kona_Mtbkr}
Touch Flo Alpha
Since the first alpha testing from Jasjamming touchflo alpha cab,I I have created and edited the cab to work as close as possible.
Then there was the breakthrough with Efrost Amazing Development which evolved buttonFlo to touchflo to another level which brought us close to true touchflo cube development which can be found here:
http://forum.xda-developers.com/showthread.php?t=338143&highlight=efrost
Another great breakthrough came from Kona_Mtbkr which you can find his thread here:
http://forum.xda-developers.com/showthread.php?t=343583
with his great work evolved the beta cab to true touchflo with the help of Raven_coda, which he and Kona_Mtbkr worked hard to get this working.
So I would ask everyone to contribute both to Raven_coda and Kona_Mtbkr to thier great work and contribution in getting us this so far with my help as well.
TouchFlo cab will be available here as soon as the final version is fixed.
HTC Cube Latest Version From Kona_Mtbkr [17.11.07]
HTC Cube 2
------------------------------------------------------------------------------------------------------------
In the mean time you can use Raven_coda until the full release is available.
HTCCube.cab [15.11.07 ]
This page will be updated soon
There are some necessary programs which need to be install below to get the full functionality of touchflo which will be updated
Click.me.if.you.like.what.I.do.
reserved
reserved for updates
New Alpha cab 3 is now up thanks to Kona_mbtkr with his explendid work I just finish it off with a cab and minor editing of some files The cab is now full and functionally working.
You guys should donate to kona_Mbtkr for his work which can be found here
http://forum.xda-developers.com/showthread.php?t=343583
I hope you guys enjoy
NEW VIDEO ON YOUTUBE WITH BETA CAB 3
http://youtube.com/watch?v=zyBHL56nDdQ
im getting black screen,not sure what im doing wrong.
hightechlive said:
im getting black screen,not sure what im doing wrong.
Click to expand...
Click to collapse
me too!! tried 4 times but still getting the black screen!
duttythroy said:
2. Install music plugin. {For me I used the built in htc homeplugin which works with the backligh settings. I install htc music plugin which you can find in my thread and use shaps advance config to enable music plugin in HTC HOME PLUGIN so to reduce much needed space on the today screen}.
Click to expand...
Click to collapse
could you give us a link!?
Same here. Black screen. Too bad, I am really looking forward to this working.
it works flawlessly if you follow the instructions provided
it works flawlessly if you follow the instructions provided, I have added music plugin in the first post now and I will try to make a small video of it working.
I havent had a black screen for the last 24 hours thats including soft resets
WOW i installed the music plugin and then soft rest and it works like a charm!!
But the only problem is that i cant move the cube with my finger, the only way is to push the assigned button!
lungothrin said:
WOW i installed the music plugin and then soft rest and it works like a charm!!
But the only problem is that i cant move the cube with my finger, the only way is to push the assigned button!
Click to expand...
Click to collapse
I will try my best and continue my work where I left off in the hermes forum to try and get it working with fingers so to have touchflo cube working. with the help of efrost breakthrough I think we can see it soon
a minor bug
If you install efrost alpha cab and calibrate and then uninstall and want to calibrate again it wont work.
You have to go into windows find a file called calibrate and click and calibrate again. You might need to soft reset .
i got a video of the Cube in action:
http://www.youtube.com/watch?v=LH2gOTdlt0w
@duttythroy
do you think it possible to wrap the whole stuff in a single clean .cab package ?
draxredd said:
@duttythroy
do you think it possible to wrap the whole stuff in a single clean .cab package ?
Click to expand...
Click to collapse
Thats the first thing I tried but for some reason It doest work, I will try and make a finger touch edition if thats possible but I think when i start cooking that would be possible. In the mean time i'm just researching as how to get it the cube to activate by fingers
lungothrin said:
i got a video of the Cube in action:
http://www.youtube.com/watch?v=LH2gOTdlt0w
Click to expand...
Click to collapse
just saw your video you can take the music pugin off the todays screen by using the method in post 1. nice one though.
where can i get schaps advance configuration tool...it's always built in to someones ROM not a separate cab file...
strikeIII said:
where can i get schaps advance configuration tool...it's always built in to someones ROM not a separate cab file...
Click to expand...
Click to collapse
its in my first thread in kaiser
http://forum.xda-developers.com/showthread.php?t=332438
I'm getting the same result as the others with a black screen on my ATT Tilt...followed all the steps and still nothing....well, I'll just have to wait to get this bad boy going....i uninstalled everything and when i tried to re-install i can't get passed the screen calibration test...i hit start FTouchFlo and nothing happens...weird...
strikeIII said:
I'm getting the same result as the others with a black screen on my ATT Tilt...followed all the steps and still nothing....well, I'll just have to wait to get this bad boy going....i uninstalled everything and when i tried to re-install i can't get passed the screen calibration test...i hit start FTouchFlo and nothing happens...weird...
Click to expand...
Click to collapse
i have explained already so i will be nice. It works 100% if you follow all the instructions.
Install music plug in ensure
Install efrost alpha button { if you already did and un-install it you will have to go to windows and find file callled calibrate click it will start the 5 steps calibration process.
soft reset
Install touch flo alpha
Install JT ButtonFlo
assign touchflo to any button
soft reset
Enjoy buttonflo
my calibrate was in program files.
donsaxena said:
my calibrate was in program files.
Click to expand...
Click to collapse
is it working for you?
duttythroy said:
i have explained already so i will be nice. It works 100% if you follow all the instructions.
Install music plug in ensure
Install efrost alpha button { if you already did and un-install it you will have to go to windows and find file callled calibrate click it will start the 5 steps calibration process.
soft reset
Install touch flo alpha
Install JT ButtonFlo
assign touchflo to any button
soft reset
Enjoy buttonflo
Click to expand...
Click to collapse
sorry dutty, i followed everything i even put the music plug-in on the today screen and in the HTC home just in case still doesn't work...it may be one of those things that work on the HTC Kaiser but not on the ATT Tilt.
I cant find a rom that has a touch flow cube. I want the black diamond rom for my wizard to work with herald. I love that rom!!
There are many ROMs here. Usually the ones that aren't labeled "lite" "slim" or "clean" have the cube but the cube has to enabled.
cube
ive tried several roms and I got one that lete enable the cube, but I dont know how to invoke it. On my wizard i invoked it by setting it to a button. Im lost.
The WM6.1 ROM's don't have it.... :-/
well i don't know, i do kinda use it a llllot with the WM6 ROM's...
You have to set it up. You can set it to use a button or a gesture. I find it utterly useless, so I'm not the expert on it.
I didn't flash one yet... I was just assuming since the 3 here all said Touch Flo No Cube...hmm...maybe I won't miss the cube after all!!
I mostly use it for the photo dialer.. haha... i have like 18 "faves" now
Oh...ttran released Open Touch v3.0 Biggy has a cube..i think..
how interesting..........
Touch-It 4.41, which is better, has a Cube.
Worked for me and most everyone else whose tried it. Apparently the problem is his and not the software's.
aad4321 said:
thats strange, for my wing, when i go into the settings, it just has a half a box, and i cant click it.... i think it may have to do with that x button cab i had to install.
Click to expand...
Click to collapse
If you installed that X Button FIX then yeah it creates a useless Icon in the programs called TF Settings.
That IS THE SOLUTION! IF YOU DONT LIKE IT GET THE HELL RID OF IT!
This has been said several time now in the forums!
mv3 said:
The WM6.1 ROM's don't have it.... :-/
well i don't know, i do kinda use it a llllot with the WM6 ROM's...
Click to expand...
Click to collapse
Well you know the cube makes your Device SOOOOOO Sloww!!
And you allready have a applaucher in the HTC Home Plug so why cube ?
well... it doesnt seem to slow down my phone.. i also have the sprint home plug-in. i like having the 2nd app launcher and photodialer.. and sometimes way more faster than going back to the today screen and having to focus on which tab, then which shortcut to push. with the cube..i could be using whatever program i'm on..then with only 1 or 2 finger gestures, i'd be at the dialer or app launcher.windows mobile apps are known to run differently on same model phone and everybody has different tastes.. just cause i liked it doesnt mean you have to also.. and really, it didn't slow down performance for me... but activesync startig up in the background, hat slows mine down!
so whats the difference animated weather?
what are the pros and cons of using either?
or are they really just the same?
let the flames begin
I searched touchflo2d vs 3d and couldnt find any info
so sorry in advanced if it was already covered else where.
hmmmmm.....lets see here
Pro's of TF3D:
Great Animation
Great Graphics
Accurate Weather(its fun too )
Fast
Cons:
Not the easiest thing to configure
Takes a while to get everything working properly and fast(Flashing a ROM and all of that)
Landscape
Pro's of M2D:
Works on any device
Is easy to config
Just as fast as TF3D
Weather is ok but not very animated
Cons:
2D Graphics are not the best
Landscape
More importantly right now, with M3d you can't put your phone into standby while it's running. And on my phone it ran like a dog!
guess you havent read my thread about TF3D on our kaisers
kaiserII101 said:
hmmmmm.....lets see here
Pro's of TF3D:
Great Animation
Great Graphics
Accurate Weather(its fun too )
Fast
Cons:
Not the easiest thing to configure
Takes a while to get everything working properly and fast(Flashing a ROM and all of that)
Landscape
Pro's of M2D:
Works on any device
Is easy to config
Just as fast as TF3D
Weather is ok but not very animated
Cons:
2D Graphics are not the best
Landscape
Click to expand...
Click to collapse
ah
my 1st attempt at getting tf3d to install on my stock rom was a failer it just kept looping loading touch here to load and would freeze up and never load. I did a hardreset and I got 2d to load.
so with t3d it needs to be installed on top of a cooked rom it wont run on a stock 6.1 rom?
can you get both options to show up under home options or is it 1 or the other. I like play with my apps and switch back and forth till I decide which one works best for me being able install both would ber great less trouble hardrestting each time I wqant to compare.
thanks for replying
you cant have both M2D and TF3D both installed....in my signature there is a link covering a lot on TF3D and yes it has to be a cooked ROM.
I use L26 TF3D Rom V4 and even though it is a little annoying to have to kill (turn off) Manilla everytime you want to put your phone to sleep, it is a great rom. My question is this. What is the difference between Manilla and Throttle? I tried searching but perhaps I did not search correctly. Thanks everyone.
kaiserII101 said:
you cant have both M2D and TF3D both installed....in my signature there is a link covering a lot on TF3D and yes it has to be a cooked ROM.
Click to expand...
Click to collapse
Ah thanks I thought I followed all the instructions in your t3d thread correctly.
I just got my tilt so will wait a few weeks (atleast till the 90 warranty runs out) before I start flashing cooked roms to it. Im using a ported blackstone m2d rom on my wizard and refuse to use the old htchome screen on my new phone
thanks for the help I would have spet the next few days trying to get t3d to work on my factory rom.
kaiserII101 said:
guess you havent read my thread about TF3D on our kaisers
Click to expand...
Click to collapse
Ooh - no. That thread must have started about a week after I last tried TF3D and I missed it! I'll have to give it another try now.... (damn you )