Car cradle/holder (for navigation) - Tilt, TyTN II, MDA Vario III General

Hi,
Anyone can suggest a very good car cradle/holder for Kaiser?
The one that has power connector of course.
I cant use my old cradle (I used it with the Magician) because the usb power location is different (opposite).

you could always face the phone in the other direction...

I have always been very impressed with the powered holders from:
http://www.proclipusa.com
I have already asked them about the Kaiser, and they confirmed they are making one, it just isn't available yet.
-R

Looks like ProClip is ready to go for the Tilt
robroy90,
The Tilt now appears in Proclip's device selector.

drjekyll said:
robroy90,
The Tilt now appears in Proclip's device selector.
Click to expand...
Click to collapse
Yes, and it has been listed for several weeks. But after you place the order, you will see that it is backordered. I ordered mine over 2 weeks ago and it still hasn't shipped.
In spite of this, I have always liked my proclip holsters and holders.

I ordered one last week and it is due to be delivered on Wednesday. I've owned 4 other proclip device mounts and 3 car mounts, and have loved all of them. If you've never used a proclip mount, it will probably cost you $90-100 or so for the device mount and car mount combined. Their car mounts are pretty slick also.
Shipping Ship Date Tracking Number
Ground (NO SIGNATURE REQUIRED) 11/29/2007 #########
Item Description Item No. Unit Price Qty. Total
Holder with Tilt Swivel and Cigarette Lighter Charger
AT&T Tilt 8925 968752 USD $69.99 1 USD $69.99

I ordered and received my ProClip about a month ago, and absolutely love it. I will say that it does take a little getting used to sliding it in. Since the Tilt sits forward in the clip (gap behind the Tilt) so that the keyboard can slide, it can be a bit of a trick in the beginning figuring out just how to slide it in, especially when doing it without looking. But now, I can slide it in without looking, and have no issues at all.

For those looking for a cheap solution, the Kaiser is actually slim enough to fit into most cellphone vent mounts, if you trim the cushions a little bit. That solution is also less obtrusive and less likely to get your car broken into.
Surur

Related

Nice adjustable car mount for $7.49 shipped free

I got this deal from Dealnews.com. I actually bought one 2 weeks ago, and am impressed with it... it works well and since it doesnt have one of those long flexable goose necks, it doesn't vibrate my 6800 like my previous crappy ebay mount did. Here is the text:
Meritline.com offers this Adjustable Universal Windshield Mount for $14.99 before coupon code "SHP50POFF", $7.49 after. With free shipping, it's one of the lowest total prices we've seen for such an item. It features a 360-degree swivel and adjustable side grips to fit a wide array of items such as PDAs, MP3 players, GPS units, and more. Deal ends May 4.
Click to expand...
Click to collapse
here's the link:
http://dealnews.com/lw/artclick.html?2,226091,639857
This is great! Thanks!
thanks $13 for the mount plus car charger is a decent deal
i wouldn't get a suction cup holster for my phone mainly cause sometimes they dont stick and might drop your phone
mburris said:
I got this deal from Dealnews.com. I actually bought one 2 weeks ago, and am impressed with it... it works well and since it doesnt have one of those long flexable goose necks, it doesn't vibrate my 6800 like my previous crappy ebay mount did. Here is the text:
here's the link:
http://dealnews.com/lw/artclick.html?2,226091,639857
Click to expand...
Click to collapse
will this still work if I have one of the extended 2400 batteries on my phone?

Pdair car mount for leather case or the arm one from ebay???

Hi all, after some advice re a car mount for my wonderful little gadget. I have a pdair leather case and as I use my phone a bit in my car (tomtom and some calls and even listening to podcasts etc) I am going to get a car mount and want opinions on the pdair mount http://www.amazon.co.uk/PDair-Sucti...2?ie=UTF8&s=electronics&qid=1267533319&sr=8-2 or the "arm type" mount http://cgi.ebay.co.uk/WINDSCREEN-SU...ries_MobilePhoneBatteries?hash=item5190b13e3c (or something along that line)... any help/advice would be appreciated...
FEI I am leaning more to the pdair version as I wont have to keep taking my phone out of the case and then puting it back in... but the arm type would prob be sturdier... decisions decisions...
I can only comment on the second item - as that is what I bought (along with a PDAir pouch for the HD2).
It holds well onto the windscreen and is reasonably solid. The unit doesn't really need the retaining clip at the top of the phone (unless you are doing some serious off-roading).
The only problem I have found is the length the holder is away from the windscreen. With most cars now coming with very sloping windscreens and the size of the HD2, you may find it very awkward to install and remove the HD2 from the holder (not a problem if you are fitting it portrait ways). My first attempt was to tilt the holder so that the top of the phone was closer to me than the bottom of the phone. Since I prefer to look at the phone without this incline, I used an old Adhesive plate (that came with my old car holder kit for a HTC Diamond), mounted that on the dashboard and attached the car kit to that.
I bought from this ebay seller and it doesn't come with a charger, yet you can buy the same item for the same price on ebay that do include a charger.
Thanks for the info Fred... I ordered one and will see how it works out... the dashboard trick sounds right along the lines I was thinking...

Custom Car Kit

Looks like the custom ones are starting to appear not a bad Price at £15.99
http://cgi.ebay.co.uk/FLEXIBLE-SUCT...K_AudioTVElectronics_PDAAccessories_PDAMounts
And £13.99 for the Vent kit
http://cgi.ebay.co.uk/SWIVEL-CAR-AI...K_AudioTVElectronics_PDAAccessories_PDAMounts
Hmm, Pre-order and the pictures are faked (charging lead plugging in the left hand side?). Best wait till after their September due date and check again, it looks like it will be a nice solution if it arrives.
I bought a universal car dock from ebay and whilst the phone fits (kind of) the streak is just so damn heavy it shakes about A LOT. It's usable, but very irritating.
Not sure what these 2 will be like though, but watch out for shaking
saving seller for future use.
Now they are on i am sure their will be more to follow ie China
ah, the chinese. good food, attractive women, cheaply made, cheaply priced inferior products we just cant resist. gotta love em
Yep that is all True and Yep We never Learn and we BUY BUY BUY dont we just love em
Considering the car docking kit from Dell is perfect, I don't see why anyone would consider a third party car station.
Muo said:
Considering the car docking kit from Dell is perfect, I don't see why anyone would consider a third party car station.
Click to expand...
Click to collapse
Sure... aside from the over-inflated price. I bought mine from a local Wireless Wave here in Toronto and it works just as well for $20 taxes in.
Dell car kit far from perfect
I bought the car kit from Dell, and no matter whether the device is hanging from the windshield or off the dash, the Streak bounces around like mad when I am driving. My car is nowhere NEAR that bad - it is a heavy device and an awkward mount.
I just ordered a GPS t-mount from ProClip that might work well. I will take the sleeve the Streak sits in on the gooseneck and mount that on the ProClip mount, then attach that to the vehicle mount made for my car. That should lock the device down.
It's an expensive solution, but I spend about an hour each way commuting daily, so it is really a necessity for me. My mount should be here on Wednesday, and if anyone is interested I will write it up and post a picture or two if it works.
pictures would be awesome.
Do you see anyway to have the adapter attached (jerry-rigged) to the mount so that it plugs in when you insert the Streak?
I am looking for a way, as plugging the cable in is extremely tempermental, and a pain, to be honest!!
I suppose you could do something on the bottom of the Dell sleeve to hold the cable. I will have my cable secured on the console and the mount, so it is no problem for me to plug it in the bottom of the phone when I put it in the stand.
The mount comes in tomorrow. Can't wait. Had to slam on the brakes on the way home today and it looked like my phone was on the business end of a trebuchet...
cue_32 said:
Sure... aside from the over-inflated price. I bought mine from a local Wireless Wave here in Toronto and it works just as well for $20 taxes in.
Click to expand...
Click to collapse
In the US it is only 39.99.... not too expensive if you ask me. Plus this car docking kit really is perfect for the Streak. The sides are flexible rubber that hold the Streak and on the back there are rubber pads so absolutely no plastic is touching the Streak resulting in no scratches. Plus you get a a cable with it.
Perfection is worth the 40 bucks. Although I would love to see images of the one you purchased and seem pleased with.
I have the Dell car kit and I like it. It seems reasonably priced at $40 since it comes with a cigar lighter-USB adapter and USB cable as separate items. One can never have too many charging cables or options. The mount does jiggle a bit however this can be cured by positioning the mount so the cradle rests on top of the dash rather than suspended in mid-air.
Sent from my Dell Streak using XDA App
I'm looking to use the dell case inners for a car holder. I have some garmin mounts that will allow me to fix to the dash.
The issue with the ones from ebay (original post) the holding part is covering the power pdmi connector.
Sent from my Dell Streak using XDA App
Anyone thinking of making their own car mount should make clearance for the camera lens so it can be used as a dash-cam. Dell did not do this and it would require some cutting on their kit.
Sent from my Dell Streak using XDA App
I acutally brought one of these:
http://www.mobilefun.co.uk/clingo-universal-in-car-holder-p25398.htm
The arm is solid but since it still sticks out a fair bit and the phone is kinda heavy, it does bounce a little (nothing compared to the flexi arms you find on most other phone holders). And since the Dell has a flat back, it sticks pretty well too (though I have had it drop once but I think that was cos my brother didn't put it on properly and due to the weight, it slowly peeled itself off). The pad only covers a small area of the back of the phone so you can use the camera, and there's also no clamps that would obscure the charging port or the buttons on top.
If the docking station was cheaper, I'd seriously consider getting another one for the car, that way I can easily put it on and take it off with super easy and I can leave the cable plugged in and just tuck it away (saves so much time when I do multiple deliveries and stuff).
da_ferreira said:
I bought the car kit from Dell, and no matter whether the device is hanging from the windshield or off the dash, the Streak bounces around like mad when I am driving. My car is nowhere NEAR that bad - it is a heavy device and an awkward mount.
I just ordered a GPS t-mount from ProClip that might work well. I will take the sleeve the Streak sits in on the gooseneck and mount that on the ProClip mount, then attach that to the vehicle mount made for my car. That should lock the device down.
It's an expensive solution, but I spend about an hour each way commuting daily, so it is really a necessity for me. My mount should be here on Wednesday, and if anyone is interested I will write it up and post a picture or two if it works.
Click to expand...
Click to collapse
which t clip did you get i use brodit mounts all the time and am just about to buy a streak .... am gonna get the car kit cos there is £25 off it when you buy both from dell direct .... but i hate mounts that sit on the window ..... so the t clip sounds good solution ,.,, which one did you buy and where from ???
ta
I've seen the Dell car mount kit, and it seems to have a snugg fit to the dell.
my question is... can you use it with a case over the Dell, something like the form fit case from Dell.
Keethos said:
I acutally brought one of these:
link: mobileFun
How good is it really? does it pad really grip the device. I'ts an interesting concept, but does it hold onto the Dell through a long journey.
would you recommned it?
thanks
Click to expand...
Click to collapse

Official Motorola Car Mount

Hi,
I have pre-ordered one of these from Play.com as they are doing it for £22.50 where as everywhere else is selling for £30 RRP or sometimes more.
Anyone got their hands on one yet? I pre-ordered a few weeks ago when i first got my Defy and the stock status has gone from stock arriving 29th Nov to Awaiting Stock. I guess the weather isn't helping.
I've wanting to order one as well. Look forward to any feedback people have.
ZootHornRollo said:
Hi,
I have pre-ordered one of these from Play.com as they are doing it for £22.50 where as everywhere else is selling for £30 RRP or sometimes more.
Anyone got their hands on one yet? I pre-ordered a few weeks ago when i first got my Defy and the stock status has gone from stock arriving 29th Nov to Awaiting Stock. I guess the weather isn't helping.
Click to expand...
Click to collapse
Many thanks for that info, have just ordered one from Play.com - showing as in stock now, but with this snow who knows how long it will take to arrive.
It's going to look just dandy on my motorbike!
Status is now updated to 'Packing' so hopefully will have it soon enough.
I'm going to assume the mail will slow for a while yet while they clear backlog so if i have it by next weekend that'll be good enough for me.
(and besides, i need to switch over my car stereo before i can use the audio lead)
Thats the stereo switched over, just waiting for my car mount and 16GB sdcard now.
I ordered a car mount today, went from 2-5 days when I ordered it to approx 17th December just after I paid.. bastards..
That's maybe when they are expecting staff to get through the snow and dispatch it!
Sent from my MB525 using XDA App
no snow in Sydney Australia, currently 30C and Sunny.
Hi, I was very lazy and ordered the first genuine Motorola one i saw on the web from clove. I didn't notice the price didn't include tax or postage. Doh!
Its a great mount,if a little bulky. I didn't know about magnet to trigger the car dock app. So as I started playing I clicked the phone in and the app came on its like Wow (yes i am easily pleased). And if you dont like the Auto trigger just put the phone in the other way round and the magnet is in the wrong place to work.
I can't really tell from the pics, but do you have to plug the micro usb in separately or is it one motion. i.e. is the cable separate or is it firmly attached to the cradle?
Also does the cradle rotate to be long ways instead of wide?
accordng to expansys description :
Power-pass through –power connection with insertion of the phone, no 2ndstep required. Simply plug in the included In Car Charger into the back of the mount.
Click to expand...
Click to collapse
yea, read that, would just like to see some actual pictures.
I've ordered it anyway, so I just need to get some patience.
car mount
The micro usb connection is completely separate.There are no sides to the mount at all,only a back and the little corner clips.So two actions.
There are two little tabs on the back that you can clip the power cord to, and leave a little loop to plug the charger into the phone. You could then route the cable out of the way of the
radio or heater controls and not have to re-route it every time.
But as I have previously wrecked a usb connection on my last phone I plug it in on my lap pushing very gently. Then clip phone into the mount.
The phone holder to the suction cup stand is a ball and socket joint, so it can be twisted and rotated through any angle. It can also be tightened, to lock the position.
Hope this helps. C
thanks,
so much for the expansys description..
Could you post a picture?
Sent from my MB525 using XDA App
cactus6220 said:
The micro usb connection is completely separate.There are no sides to the mount at all,only a back and the little corner clips.So two actions.
There are two little tabs on the back that you can clip the power cord to, and leave a little loop to plug the charger into the phone. You could then route the cable out of the way of the
radio or heater controls and not have to re-route it every time.
But as I have previously wrecked a usb connection on my last phone I plug it in on my lap pushing very gently. Then clip phone into the mount.
The phone holder to the suction cup stand is a ball and socket joint, so it can be twisted and rotated through any angle. It can also be tightened, to lock the position.
Hope this helps. C
Click to expand...
Click to collapse
where did you get yours from?
I pre-ordered from play.com and still haven't received it yet (although it has been dispatched). I know things have been bad in the UK but thats been about 10 days.
I bought mine from Clove
w w w. clove. co. uk I cant post links as still a newbie
But worked out at nearly £33 with tax and shipping, it did arrive in 2 days, but would rather have waited at a cheaper price.
Some other orders for stuff (from different suppliers) took 12 working days.
It was 2nd class post which is quoted as 8-10 working days, so what with the Xmas post yours should arrive any day, but a polite mail to them wouldn't hurt.
New toys never arrive quick enough.
Im not with my car, I will try and take some pics on monday if you still want them.?
Thanks N
I for one would love some high res pictures of it - not for mounting it in my car, but for taking it apart and mounting it on my bike, replacing this thing I made for my HTC Desire.
car mount photos
Hi,
hear are some photos, taken with my Defy. I did take some with my camera with the Defy in the dock, but it looks like my pc is not seeing the SD card.
Your diy mount looks great. My kind of modding, hacksaw and zip ties and minimal planning!
I had thought of getting 2 mounts, the extra one i was going to look at making a bike mount for.
but I dont think it would make a good starting point for a bike mount. Not for the price anyway.
The phone is not that tightly held in the mount. You can pull it straight out without releasing any of the corner tabs. Fine for driving unless your on the Paris-Dakar, but wouldn't trust it on a bike.
On my last phone bike mount hack (Nokia 6220 classic) from
e cell shop E Bay
I just put a couple of elastic bands around it and it was fine. But as the defy has such a great and big screen there's little room for anything across the front.This was a dry weather mount only!
You can buy adjustable car mounts for less than £10, thats 3 goes at modding for the same price as the Motorola. or
Wouldn't it just slip in your current mount?
Hope this helps N.
thanks for the pics, very disappointed its a 2 part process to mount and attach the cable.. o well. I'm expecting mine in the post late this week.
I probably wont put one my mountain bike since its more 4x (hard to get lost on those trails) but will probably get one for my Motorbike.

Ebay car mount - be careful!

I bought this car mount a few weeks ago and have been very impressed with it, even in my old suzuki 4x4 which rattles like a can there is no vibration with the mount.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=380292361164#ht_3536wt_1158
However, I have just noticed where the clip hooks the phone at the top, there is that much tension in it, well it has started to lift the top part of the phone away
So I'm going to try heating it up a bit and pulling the tab back a bit so it reduces the tension.
Something for others to watch out for!
Cheers
Todd
For those that have a defender case and want a car mount there are Rocketfish and Bracketron mounts that have the same attachment.
Google shopping results - for rocketfish
Google Results - for Bracketron mounts
These will work with the Dell car mount bracket or the clip on the Defender case.
Interesting feed back Todd, thanks. I was just about to order on.
Hopefully you can answer a question for me then. I was looking at getting one with the belt clip as well, Would the holder for the streak be sufficient that I could just get the one holder and swap this to the belt clip and then back to the windscreen holder? or would I need two holders and swap the Streak between the 2?
Thanks in advance.
Stuart
Can't really answer your question on that Stuart as I do not have a belt clip as well.
If it helps I can take a photo of the holder if you like.
I've got one of these and have not had the same issue.
I've been using mine for about 6 months now and the phone is still perfect?....
Lucky you
I'm not saying it's a bad mount, far from it, the post was just to make folk aware of a potential issue.
Ta
Todd
Nope, that's fine
Just reread my post and it makes it sound like I don't believe
Anyway, mines fine, seems like you had an issue with an over zealous clip.
Although we've only commented on 2, so that's 50% are good and 50% are bad!
i have the same mount for car and also have a belt clip....
These are the two best accessories that i purchased for my phone...
Hi, I have this one called Clingo I bought from ebay.
That is very nice, you can put any phone on that, I'am courier ran about 300 miles day, diesel car, my van vibrate a lot and the phone still there hehe.
I cannot put external links yet, but search for clingo on ebay, that's a good one.
Fabio.

Categories

Resources