Database Develop

how can i use WIZARD with VODAFONE ROMANIA network ?

Hello everyone !
i have just bought this device. not yet received it ...it's on it's way. I want to find out what do i have to do with the rom or whatever to make this device work on vodafone romania network?( vodafone bought CONNEX )
I'm not sure what rom it has, most probably T mobile .
And further more, can you tell me how to upgrade to this rom?where can i buy it from and how to flash the deivce. I've read that u can only flash the rom with a specific ver...an older version.
HELP?
10x a lot
after searching a little bit ... it's not the rom i need to flash to use it on vodafone, i have to unlock it.
ok, anyone can tell me what DO I NEED to unlock and make it useable on vodafone romania?
PLS ! 10x again

Unlocking
If you do a little search around here, you'll find a software called Lokiwiz, and all you need to do is follow the instructions and you can unlock your device. it's a good Idea to do a CID unlocking as well (with the same software) before you upgrade the ROM. Right now I've been using the Mr. Clean ROM for a couple of days, and it's working fine. I would recommend that one.
Hai Noroc!
If it's T-MO branded, you will definitely have to unlock it before using it back home in good old RO

like i said in a pm, i kind of know what do i have to do. my only worry now is the downgrade to a 1.xx rom.
With the mda still CID locked & sim locked i have to downgrade to a 1.xx rom in order to use the lokiwiz right?
So, to avoid any problems while doing this, which rom should i use for 1.xx version?

ROM reversal

As I have been disussing in another post, i am considering updating my Orange SPV M700 to the Dopod ROM in order to get Phonepad.
If I do this, please can someone tell me where I can find a copy of the original Orange ROM (1.23 - English), and whether I will be able to reinstall this.
Also, is it possible to reverse the CID/SIM unlock that it is necessary to perform to install the Dopod ROM initially.
Thanks

Hi
You can upgrade your rom using SSPL method without CID unlocking.

MteoR SUPERCID

My MteoR can´t boot anymore (freezing on second bootscren)...
Any option how to set SUPERCID on MteoR ONLY over the bootloader and then upgrade the ROM ?

HI, unfortunately it's not possible. I have the same problem,my mteor stuck on bootloader, my CID is VODAP304 and i can't upgrade any roms till now... =(

when mteor didn't boot anymore "superciding" is not possible this is correct..
but with an shipped upgrade the "restore" of phone is possible!!! only thing is that you must have a correct shipped rom that match you cid... (to know what cid you have look in wiki!!)
innocent, made some pressure on vodafon or send them your phone ... there must be an rom for you phone... because they sell it with the vodafone software on it... the want give it out... but you have bought the phone and with that the software ... they must gave you the rom!!

Futureshock, need your help and advice...
futureshock said:
when mteor didn't boot anymore "superciding" is not possible this is correct..
but with an shipped upgrade the "restore" of phone is possible!!! only thing is that you must have a correct shipped rom that match you cid... (to know what cid you have look in wiki!!)
innocent, made some pressure on vodafon or send them your phone ... there must be an rom for you phone... because they sell it with the vodafone software on it... the want give it out... but you have bought the phone and with that the software ... they must gave you the rom!!
Click to expand...
Click to collapse
Dear futureshock, i was impressed by your rom 91DPI..., i decided to flash it on my imate spjas...
after sevral trials, and tried all the steps mentionned in your post, no result,
now i'm stucked in the blue windows mobile boot screen...
i don't know what to do, i tried to boot from sd card useless, i tried to do hard spl, or sspl.... nothing worked
my 3 color bootscreen mention ( IPL-0.90, SPL-1.09.000)...
( NEED YOUR HELP AND ADVICE, as soon as you can)
thanx!!!!

Need urgent help?

i m having qtek 9100 (g3)i dont know which language it is? by mistake i upgraded to custom rom without unlocking cid.. i stucked in 98% n bootloader screen appears... i want to change in english language. itried several roms.. but the same problem. plz guide me out of this. i wanna my cell started...

in the netherlands the qtek's are sold without a simlock
however, there is a possibility that there is a cid-lock.
to remove this, read the wiki.
but first flash it with an original qtek rom
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
then cid unlock it and flash it with the rom you want

rom probs
hi, sorry im new to the site but i noticed you have the same rom as me (1.37.401.3 WWE) i cant seem to unlock the CID, on command it comes up with "could not update itsutils.dll to the current version, maybe its in use" any help would be much appreciated.
p.s i have already flashed it to get that rom so im not sure if i need to find a new one or it can be resolved...

version?

Hi all, I'm a newbie. I did research but still couldn't find an answer, hope some experts can help me out. Thank you so much.
I'm trying to flash my 8125 and the software asked me for the SPL version of bootloader. Anybody know how can I find out the bootloader SPL version for my phone 8125 (or Pocket PC in general) any help would be really appreciated! Thanks in advance.

what rom is currently in it? is it stock? for instance, my MDA from tmo now has a stock rom (long, depressing story, don't ask) and the ipl/spl if memory serves correctly is 2.26
It shows on your initial boot screen in red letters (at least my tmo rom is in red). I'm NOT sure if the bootloader should have a seperate number but if not...simply soft reset your phone and as it boots look at the first screen to pop up and write down those numbers.
Wish I could help you more.

Another easy way is to get WST (check my signature) and read the "Device Info" as it will tell you what Bootloaders you have, the Gx type and much more
@ kadin27
what sw asks for the bootloader version before flashing?

kadin27 said:
Hi all, I'm a newbie. I did research but still couldn't find an answer, hope some experts can help me out. Thank you so much.
I'm trying to flash my 8125 and the software asked me for the SPL version of bootloader. Anybody know how can I find out the bootloader SPL version for my phone 8125 (or Pocket PC in general) any help would be really appreciated! Thanks in advance.
Click to expand...
Click to collapse
what software your talking about,with which you are trying to flash your device ?
windows mobile OS are packed into a package called 'Roms',which have the OS,OEM drivers,extended rom(contains applications) and Romupdateutility (RUU)which flashes the OS to the device,.When flashing it won't ask for any SPL version,but if the rom is a stock rom (official rom) with a higher Os version than already installed,will flash automatically without any verification of os ipl/spl.or if older than the present rom will not flash and stops with an Error code and it's explanation.
If you are trying to flash a non official custom build rom on a locked device it will also stop flashing with an Error code,or sometimes it seems it has flashed and ruu confirms on the pc 'Congratulations you have successfully upgraded'but when it reboots the previus OS loads up.But to flash a custom build ron,it's mandatory to have your phone CID unlocked,custom roms cannot be flashed to a cid locked devices.
SO,what are you using and what ERROR CODE it displays ?
Secondly, IPL/SPL versions are displayed when you power on or reboot the device on the initial first splash screen in red at the top of the screen.
OR as already suggested by mestrini download WST tool and run to check IPL/SPL and all other info about your device.
IPl/SPL are infect called the 'Bootloaders'