Am I missing someting? Can't do a hard reset ... - Tilt, TyTN II, MDA Vario III General

Trying to do a hardreset by following the manual ...
Press and hold the left SOFT KEY and the right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device.
OK ... tried that ... but the device just does a soft reset and starts up normally afterwards. The left / right soft keys are the ones you use to select the associated menu / selection options in applications.
Note that the hard reset through the other route works fine:
1. [FONT=VAOIKY+MyriadPro-Regular,Myriad Pro]Tap [/FONT]Start > Settings > System [FONT=VAOIKY+MyriadPro-Regular,Myriad Pro]tab [/FONT]> Clear Storage[FONT=VAOIKY+MyriadPro-Regular,Myriad Pro].
[/FONT]2. [FONT=VAOIKY+MyriadPro-Regular,Myriad Pro]Type "1234" in the box and tap [/FONT]YES[FONT=VAOIKY+MyriadPro-Regular,Myriad Pro]. [/FONT]
[FONT=VAOIKY+MyriadPro-Regular,Myriad Pro][/FONT]
[FONT=VAOIKY+MyriadPro-Regular,Myriad Pro]Am I missing something here ...?
[/FONT]

I got same result.
However, you can do this :
1. Tap Start > Settings > System tab > Clear Storage.
2. Type "1234" in the box and tap YES.
I did that, and it hard reset the device nicely.

gogol said:
I got same result.
However, you can do this :
1. Tap Start > Settings > System tab > Clear Storage.
2. Type "1234" in the box and tap YES.
I did that, and it hard reset the device nicely.
Click to expand...
Click to collapse
LOL! OP already said that this process works!

aublumberg said:
Trying to do a hardreset by following the manual ...
Press and hold the left SOFT KEY and the right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device.
OK ... tried that ... but the device just does a soft reset and starts up normally afterwards. The left / right soft keys are the ones you use to select the associated menu / selection options in applications.
Note that the hard reset through the other route works fine:
1. [FONT=VAOIKY+MyriadPro-Regular,Myriad Pro]Tap [/FONT]Start > Settings > System [FONT=VAOIKY+MyriadPro-Regular,Myriad Pro]tab [/FONT]> Clear Storage[FONT=VAOIKY+MyriadPro-Regular,Myriad Pro].
[/FONT]2. [FONT=VAOIKY+MyriadPro-Regular,Myriad Pro]Type "1234" in the box and tap [/FONT]YES[FONT=VAOIKY+MyriadPro-Regular,Myriad Pro]. [/FONT]
[FONT=VAOIKY+MyriadPro-Regular,Myriad Pro][/FONT]
[FONT=VAOIKY+MyriadPro-Regular,Myriad Pro]Am I missing something here ...?
[/FONT]
Click to expand...
Click to collapse
Make sure you have both buttons pressed and held when you hit the reset button and don't let the buttons go until you see the screen flash again. Then, as soon as the screen flashes let the buttons go and you should see the reset menu.

sherpa said:
Make sure you have both buttons pressed and held when you hit the reset button and don't let the buttons go until you see the screen flash again. Then, as soon as the screen flashes let the buttons go and you should see the reset menu.
Click to expand...
Click to collapse
Tried that including numerous variations of how long to keep the buttons pressed ... doesn't work.
What exactly do you mean by "until you see the screen flash again"? Do you mean the screen first turning black, or do you mean the screen turning from black to the next screen with "smart mobility" shown in the middle?
Also can you please post your ROM details (mine are in the sig), thanks.

Note that the two buttons you need to press are not exactley below the screen - as the yes and no buttons are little curved to let you press it by mistake

Finally ...
Yes the buttons really suck compared to the TyTN I unless you have miniscule girlie fingers ...
Anyway thanks for the pointer ... I changed tactics and pressed the keys with my right hand and making 100% sure that no other adjacent key is accidentally pressed as well ... use the left hand for the stylus to reset
Thanks!

Related

format xda11s

i have tried everything to format my xda 11s below
Press and hold the "Power" button, and then press the Reset Button
Colored stripes (the bootscreen) will appear on the screen
* Quickly press "Record" & "Camera" before the versions appear at bottom right
* OR, press "Power" & "Camera" & "Record" buttons and Reset at the same time.
but still cant format meaning it will not go in to format mode for me to enter commands it only goes in to dark screen with usb writtten at top and v2.07 written at bottom screen. my reason for complete format is to erase the the one bridge security sotware. please help...thanks in advance
eazyrasta said:
i have tried everything to format my xda 11s below
Press and hold the "Power" button, and then press the Reset Button
Colored stripes (the bootscreen) will appear on the screen
* Quickly press "Record" & "Camera" before the versions appear at bottom right
* OR, press "Power" & "Camera" & "Record" buttons and Reset at the same time.
but still cant format meaning it will not go in to format mode for me to enter commands it only goes in to dark screen with usb writtten at top and v2.07 written at bottom screen. my reason for complete format is to erase the the one bridge security sotware. please help...thanks in advance
Click to expand...
Click to collapse
after reset immediately, press power + record + camera buttons at the same time. a menu will come up, select YES for 2nd and 3rd option, then press Mail button. all done
thanks m8...

Can't get that damn cube to work !!! (TouchFlo)

i installed everything proper, I did the settings thing on 4.1 whatever. I slide from bottom to top and nothing happens.
How can I get it fixed?
what activates the cube?
I know I am stupid
When I push the START button on the soft keys it tells me Opening shortcut error locating the target filename. When I go under programms and start the TouchFlo it shows me start for a second and then nothing happens!
exxi said:
When I push the START button on the soft keys it tells me Opening shortcut error locating the target filename. When I go under programms and start the TouchFlo it shows me start for a second and then nothing happens!
Click to expand...
Click to collapse
ok after u set ur settings in tf do a soft restart n then when it boots back up go to start/settings/buttons and jus reselect touchflo for button 1 then after that hit the windows soft key the 1 on the bottom on the left side n the slide u stylus from left to right to bring up cube...hope that helps....lmk!

Hard Reset / Clear Storage

Does anyone know how to enable this option? I just installed a cooked ROM and the option is not there?
JKO
Press and hold both the softkeys and press the reset button.
Keep holding the softkeys until you see a screen asking you if you want to delete all you data.
On this screen press send (green phone)
Voila!

Soft reboot

a soft reset of the diamond is easy with the stykus.
but i would like a link in my startmenu that reboots (or shutsdown) my phone.
does anyone know of a program that can do that (freeware offcourse)
Quick Menu
aragornol said:
Quick Menu
Click to expand...
Click to collapse
that actually works really nice.
when i press the start flag, i get the quick menu.
when you press start you get the htc start menu.
rotating the screen still does not work well.

Soft Reset - Shortcut?

Is there any way to soft reset the phone wihout pressing the power button? Would be nice with a shortcut in "Programs" for example
BelugaHval said:
Is there any way to soft reset the phone wihout pressing the power button? Would be nice with a shortcut in "Programs" for example
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=102155&d=1217141339
I recommend you to use psShutXP, you will see it in this forum, It has other useful features such as turning the screen off. I have it on my start menu.

Categories

Resources