I upgraded to all the newest roms sets on sx66 standardization site. However, anytime my phone rings I get the old "no picture" of a phone and the new dancing squares thing flashing back and forth. It's OK when I have a photo, but if I don't I get the back and forth.
Any ideas?
Related
Was using at&t rom. I haven't even gotten a chance to try other roms yet. I was using Windows live search when the gps map froze and then the screen went white. It's been white ever since. I've tried soft resets, hard resets and I can hear the at&t boot-up sound but I can only see a white screen. I can receive calls and I can hear txt msgs coming in. The front buttons no longer light up but the keyboard back light still does light up. I am also able to synchronize. I haven't installed anything in months.
After this happened I tried installing a pocket controller so I could see what was going on from a desktop. I could not fully install the program past the check the screen for additional instructions message. I also tried installed Hard-SPL so I could try a different rom. It gave me an error message saying:
ERROR: CreateProcess failed with Errorcode = 30123
- UNKNOWNERROR: 0x000075ab
Anyone have other options I could try?
Brrrrrr this sounds like the whitescreen problem I and many others had on the Hermes..
I sincerely hope it is not.
hey,
i currently use the Hyperdragon III BlackStone Build.
Recently i noticed i had a duplicate DCIM foldero n my 4gb memory card. every photo i took was duplicated aswell. Not thinking anything of it i left it.
Today i take 3 photographs. While i am viewing the on the screen goes off. so i bring it back out standby and try to skip to the next image. only, the next image is the same image.
i turn the phone off and back on, to a screen under images saying "no pictures avaliable". Now every time i take a photo it seems to just get dumped.
Is there a way i can fix this? and although unlikly, can i recover my lost images?
cheers
raty
ratykat said:
hey,
i currently use the Hyperdragon III BlackStone Build.
Recently i noticed i had a duplicate DCIM foldero n my 4gb memory card. every photo i took was duplicated aswell. Not thinking anything of it i left it.
Today i take 3 photographs. While i am viewing the on the screen goes off. so i bring it back out standby and try to skip to the next image. only, the next image is the same image.
i turn the phone off and back on, to a screen under images saying "no pictures avaliable". Now every time i take a photo it seems to just get dumped.
Is there a way i can fix this? and although unlikly, can i recover my lost images?
cheers
raty
Click to expand...
Click to collapse
BUMP!
i desperatly need help with this, none of my photos will save, not even to main memory...
Please post your inssue in the thread for the Rom you are currently using.
Ok, first off ive scanned xda and cant see an answer to this specifically, hence the post.
Love the Kaiser-14months and using L26 Diamond Build
Lost the phone one night while worse for wear and bought another on ebsay-cus its a great phone. This morning new phone and where the problem begins-
Phone arrived. Good nick and standard O2 rom is onboard- no issues. Had my sim in for a while, and texting/phone/apps are normal. Now i had an old Sprite Backup file from my old phone from March so i straight away tried to back up. I didnt consider any other factors.
Now however im stuck. The phone boots. The L26 screen and music come up but eventually i hit a new message on white screen:-
"The device is unable to boot because you have turned off the device incorrectly or tried to install an application from untrusted source.Press send to rest your device... blah blah"
Pressing send,doing nothing or hard resetting the device just keeps me going on the same cycle. I take it because i backed up a new ROM, i should have flashde this phone first. Never thought.
Can i get back to basics again?? Help.Im using a Palm treo at min and hate it.
even the home screen, i leave it there and it opens the quicksearch and just starts adding "..............................'s" it does it in messages as well, but while im typing itll also switch to the alternate keyboard so my texts end up looking like "hi i a| b{$%#@" ive tried doing a factory data reset and reinstalled the 1.6 dev phone image and cm 4.7.2.1
im thinking its a hardware issue, anyone have any ideas?
also, whats the easiest way to revert it back to stock software so i can send it back to tmobile if they send me a new phone?
TIA,
f8al
f8al said:
even the home screen, i leave it there and it opens the quicksearch and just starts adding "..............................'s" it does it in messages as well, but while im typing itll also switch to the alternate keyboard so my texts end up looking like "hi i a| b{$%#@" ive tried doing a factory data reset and reinstalled the 1.6 dev phone image and cm 4.7.2.1
im thinking its a hardware issue, anyone have any ideas?
also, whats the easiest way to revert it back to stock software so i can send it back to tmobile if they send me a new phone?
TIA,
f8al
Click to expand...
Click to collapse
Probably a stuck "." button on your keyboard. Probably just needs to be taken apart and cleaned. You might have luck just by pushing it a bunch of times and shooting it with compressed air.
If you must send it back, just write the stock system image to it. If it's tmobile branded, then you'll be looking for the "RC29 NBH" file.
The space bar also is common for sticking... it pressed twice = a period.
thanks guys, im not sure if im ready to take the phone apart as im still in warranty, but i got tmobile to send me a new one, im unrooting the old one and sending it back.
thanks again guys, if i have this issue again, ill make sure i keep ur suggestions in mind
You don't need to take it apart to blast it with compressed air...
or just try running your thumb against the bottom row of your keyboard, hopefully unsticking whichever key is causing the issue.
Well, someone is going to be getting a great "refurb."
I know some of my questions were probably covered in other threads. But I would like to go ahead and explain my case and see if anybody could help me. Any help will be appreciate it.
I recently moved and I was having problems with the reception at my new place. I tried different things. I contacted at&t and they said it could be my SIM card. I replaced it 2 times and that didn't fix the problem. I have always used the stock radio. I got so frustrated I starting flashing new radios to see if I can get an improvement on the signal. I flashed all the radios I found available for my phone. Basically anything older than my current radio will just give me 1 to 2 bars the most. Any radio newer than mine will give me full bars but will not be stable. The bars will fluctuate from 0 to 4 in a matter of minutes without me moving my phone. I had always used EnergyRom until a few months ago, when I started using PrimeV. I never had any problem with any of these ROMs. After flashing radios I realized there was an extra splash screen on my phone. A black screen with while letters: "Touch Diamond2" and at the bottom the radio number. I had never seen this screen before and I tried to remove it by flashing different ROMs, but it didn't go away. I then decided to flash my phone back to stock and flashed both the stock radio and stock ROM. After doing so, I noticed 4 screens will show up before my phone will display my home screen. The first screen is my carrier screen, white screen with at&t logo on it. The second screen is the radio screen, black screen with the Touch Diamond2 letters on it. The third screen is a HTC white screen. The last screen is a black windows mobile screen.
Here is my question. How can I restore my phone back to manufacture? I know how to restore the SPL and flash the stock ROM. I just can't figure out how to flash the stock radio without having that extra splash screen with the Touch Diamond2 letters on. I found a few threads that show you how to flash your own splash screen or change your current one. But I just want them gone. Except for the ones that the phone came with.
I want my phone to be back exactly as when I bought it so I can use the warranty.
Thank you in advance.
just flash it with the stock rom and the black screen will disapeared.
I already flashed at&t's stock room and the black screen didn't go away.