Database Develop

Orange HomeScreen

Ok well no one seems to be replying to my question about dumping my orange rom so lets try this instead.
How would i go about saving my orange homescreen so i can put it back once i have upgraded my m700 to the dopod rom.
Or, am i being stupid coz im sort of thinking that maybe the orange customization that runs on first setup is in the ext rom which will stay behind on the upgrade and i will therefore get all my orange stuff still
????? dont really know
Please help i really wanna upgrade my rom but i keep backing out until i can get these things sorted.
thanks all.
Rob

rjefferis said:
Or, am i being stupid coz im sort of thinking that maybe the orange customization that runs on first setup is in the ext rom which will stay behind on the upgrade and i will therefore get all my orange stuff still
????? dont really know
Click to expand...
Click to collapse
In the extROM of GPS enabled ROM, I can see this file : PT_WA_Abaxia.CAB which is related to this Orange customization. But I think that some parts of this Today plug'in are embedded with the OS itself.

rjefferis said:
Ok well no one seems to be replying to my question about dumping my orange rom so lets try this instead.
How would i go about saving my orange homescreen so i can put it back once i have upgraded my m700 to the dopod rom.
Or, am i being stupid coz im sort of thinking that maybe the orange customization that runs on first setup is in the ext rom which will stay behind on the upgrade and i will therefore get all my orange stuff still
????? dont really know
Please help i really wanna upgrade my rom but i keep backing out until i can get these things sorted.
thanks all.
Rob
Click to expand...
Click to collapse
On my Dopod rom I'm using the orange customisation from the Hermes ,the cab is HERMES_RO_BUILD_93_CLOCK.CAB,and it's working quite well except for the speed dial.
I think that the abaxia cab our friend mentions in the previous post should do the job.

sammis said:
the cab is HERMES_RO_BUILD_93_CLOCK.CAB
Click to expand...
Click to collapse
How big is this file ?
mine is around 100KB I think (I'm at work now, can't check how big it is exactly)

Hi everyone.
in my ext rom on my trinity i have the file PT_WA_Abaxia. I order to test whether my ext rom had the correct stuff i hard reset my hermes and installed my trininty ext rom but this didnt seem to install the homescreen. Saying that though it wouldnt let me run the autorun so i had to install the cabs individually.
The hermes homescreen is older than the trinity one. I have never been a big fan of the orange homescreen but the trinity one is quite nice. You can add vip contacts which show up straight in the homescreen rather than having to use the speeddial thing, the background pic changes depending on whether the phone is on silent, vidrate or ring. All in all a but nicer than the hermes one.

more testing
right on my hermes which was factory settings including all orange customization i tried installing the cab PT_WA_Abaxia. didnt seem to do a huge amount.
I then renamed the old DIL_APP folder and copied this folder from my trinity.
I also copied the DIL_PLUGIN.dll from the windows folder on my trinity onto my hermes. Then i soft reset and my trinity homescreen is now on my hermes and all works fine.
So now i need to know how to get my trinity homescreen onto my trinity without the original orange customization.
When i was playing with my hermes last night i tried not installing the orange customization as this then seemed to allow phonepad to work. I then tried the same steps as i did above and i could get the homescreen to show up in the list. Therefore i can only assume that i would need to run the hermes cab to install the original orange screen and then rename it and stuff like i did above.
So in summary, i would need to save the hermes homescreen cab, and the dil folder and the dll file of my trinity. Flash my trinity with the dopod rom. Install the hermes homescreen using the cab. Rename the folder and copy the trinity one across and copy the dll file into the windows folder and all should be done.
Anyone got a better way, while i go off and test my theory.

Super Sheep said:
How big is this file ?
mine is around 100KB I think (I'm at work now, can't c
heck how big it is exactly)[/
You can find the cab (304kb) in the Hermes FTP extended rom section and in the Orange_M31_00_14.123.1.614_extrom
Click to expand...
Click to collapse

thanks for that, i saved it off the hermes. getting good at this unhiding my ext rom malarky.
anyway. i tested my plan and it worked on my hermes.
I hard reset
didnt do orange ext
installed the cab file HERMES_UK_BUILD_93_CLOCK
renamed the dil folder and copied the trinity one in
copied the dll into the windows folder
and hey presto
porbably a bit of a long winded way but it worked.

Hi,
How are you sure Orange wont know yourve flashed the rom?
Also how do you prevent the orange customization after hard reset on the trinity?
Thanks
Warny

well this is the problem. If orange check then they will know we have flashed the rom. That is why i want to be able to re flash back to the orange rom if i need to.
Easiest way to stop the customization on any device is to soft reset just before it starts, when windows loads up the first time on it you will see a little window saying customization will start in 3 sec or something. Just soft reset then and the customization will not run.
So far though i havent found any real reason not to run it on the trinity though. If i dont run it on my hermes at least i can get phonepad to work but no such luck on the trinity.

just to clarify, this post
----------------------------------------------------
I hard reset
didnt do orange ext
installed the cab file HERMES_UK_BUILD_93_CLOCK
renamed the dil folder and copied the trinity one in
copied the dll into the windows folder
and hey presto
----------------------------------------------------
was testing that if we flashed to the dopod rom which has phonepad built in, this is how we could get our orange home screen back.
The second line about not doing the orange ext was really just proof of concept that the process would work even if we didnt have the ext rom installed.
I dont know whether we will loose the orange ext rom when we update to the dopod rom but this was proving that even if we do we can still get all the orange customization back again.

rjefferis said:
well this is the problem. If orange check then they will know we have flashed the rom. That is why i want to be able to re flash back to the orange rom if i need to.
Easiest way to stop the customization on any device is to soft reset just before it starts, when windows loads up the first time on it you will see a little window saying customization will start in 3 sec or something. Just soft reset then and the customization will not run.
So far though i havent found any real reason not to run it on the trinity though. If i dont run it on my hermes at least i can get phonepad to work but no such luck on the trinity.
Click to expand...
Click to collapse
OK I was hoping it would allow phonepad. So if you flash back the original rom is there any way they can tell? How close are you to doing this on your trinity? Thanks, Warny

well if we could flash back to original then they would not be able to tell. The problem is is that there is not a dumped version of the original orange rom. Therefore if we flash to the dopod rom we have no way of going back to the orange rom unless someone dumps it for us.
Realisticly there is no reason not to flash the dopod rom because we shouldnt loose anything but we gain phonepad. I do worry a bit about the fact that i cant go back again.
if you wanted to send the phone back though then orange would see that the bootscreen had changed after you have flashed to the dopod and might not be too impressed, saying that. If we flash to the dopod and we get phonepad and all our orange stuff then why would we want to send the phone back.
Oh decisions decisions

rjefferis said:
So far though i havent found any real reason not to run it on the trinity though.
Click to expand...
Click to collapse
I bypass it in order to skip orange mail installation

Hi,
OK i see. It seems from your post about your hermes that it might be possible to make the phone *look* like it has the original rom? (sorry Im half asleep today).
Are you considering trying the process out on the trinity then? (ill wait for you if so lol)
Also it voids the warranty so if it broke it would be nice to reflash to orignal rom so they cant avoid fixing it dont you think?
Warny

Warny
Yeah thats what i mean.
I am very tempted i just keep bottling it.
You are right also about the warranty
If there was an orange rom available i would do it without a thought.

rjefferis said:
Warny
Yeah thats what i mean.
I am very tempted i just keep bottling it.
You are right also about the warranty
If there was an orange rom available i would do it without a thought.
Click to expand...
Click to collapse
Have you tried things like this?:
http://forum.xda-developers.com/showthread.php?t=238945

good thinking Warny, right i tried it and it appeared to work. I created a 128mb image. The big question is. Has it worked. We need someone to test my image. Or at least tell me how i can check it has worked and how er can create a rom from it.
Oh crap, just realised. Wrong phone. im using my hermes. god damn it.
Well it worked on that. I will try it on my Trinity but i need to go and get a mini sd card now.
Anyway still need the answers to above bits for when i make the trinity image

getting a bit rommy in here
Warny
lets take this rom dumping discussion over into my other thread, might have more chance of getting answered . I have copied our last coments over there.
Cheers mate

rjefferis said:
Hi everyone.
in my ext rom on my trinity i have the file PT_WA_Abaxia. I order to test whether my ext rom had the correct stuff i hard reset my hermes and installed my trininty ext rom but this didnt seem to install the homescreen. Saying that though it wouldnt let me run the autorun so i had to install the cabs individually.
The hermes homescreen is older than the trinity one. I have never been a big fan of the orange homescreen but the trinity one is quite nice. You can add vip contacts which show up straight in the homescreen rather than having to use the speeddial thing, the background pic changes depending on whether the phone is on silent, vidrate or ring. All in all a but nicer than the hermes one.
Click to expand...
Click to collapse
Perhaps you could get someone to install the customizaton from your trinity on their trinity+dopod. Then see if there is any noticable difference?
Warny

SIM Unlock help...

Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated

fmervin said:
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
Click to expand...
Click to collapse
Did you actually read anything or did you just start hacking away ? I will cut and paste a few items out of that thread, so that you don't have to actually read it .
PLEASE READ THE *FAQ* BEFORE FLASHING OR ASKING QUESTIONS!!!
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again

Thanks for the reply
denco7 said:
Did you actually read anything or did you just start hacking away ?
Click to expand...
Click to collapse
As a matter of fact I did read that more than once.
denco7 said:
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
Click to expand...
Click to collapse
As you can see I'm a bit of a newbie here, so wasn't too sure if I did need to flash to a new rom. But I did anyway. And the call problems still remain
denco7 said:
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
Click to expand...
Click to collapse
I've been through this link as well and I was contemplating installing the latest version of the HTC WM6.1 ROMS (version 3.34.721.2, radio version 1.70.19.09) available at http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs However I was not sure if this would be ok and (at the risk of sounding extremely dumb) I was not sure what WWE stood for
denco7 said:
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Click to expand...
Click to collapse
I maintained the default that was given by the unlocker for the CID (I think all zeros). Do I have to change this as per the ROM image? I don't mind re-doing this again it's a relief that my device isn't busted

No your phone isn't busted. Go into bootloader and check what it says next to spl, if you followed Mark's steps, it should say 3.29 Hard. If that is what it says ,then you can flash any Kaiser rom you want. If it doesn't then start over again.
WWE stands for World Wide English and those roms are all in English. That rom you picked will be fine, if you do not wish to explore the fine world of custom roms ? Maybe later.
You only have to CID unlock once by following the steps, not at every rom flash.
No sound means wrong radio, 6.0 roms need 6.0 radios and 6.1 roms need 6.1 radios. If the rom has a radio in it already then flash away.

Thanks Denco Flashed the ones I mentioned and it works perfect. Can't believe I actually have a working device Thanks for all your help, really great.
Now to sync my data to my new (second hand) htc and I'm good to go

Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?

Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.

fmervin said:
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Click to expand...
Click to collapse
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.

Mister B said:
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
Click to expand...
Click to collapse
Wow, thanks for that, I was looking for a valid serial through which I can download from the htc uk site One question I had is do I install the radio which I download from htc? Or do I keep the one I have already flashed? The one I have flashed yesterday seems to be a later version than what I've downloaded from htc
denco7 said:
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Click to expand...
Click to collapse
1. I keep hearing on this forum about Hard SPL, I'm not sure what this is used for or why it is required but I followed the instructions and it seems I had installed JumpSPL1.56-KAIS.exe. Now, since then I had flashed the rom, so do I need to reinstall this again? Is there some other one I should be using? I come across different versions on some threads. Also, how can I check the version of HardSPL I have?
2. When I view the memory (under settings) it shows me Storage and Program. However, I can't seem to see any storage area in file explorer. I know in my old xda 2i, there used to be a separate storage area. The reason is because some of the apps I install are quite bulky for example lexisgoo english dictionary (the dictionary files themselves are about 18mb) and this fills up the main memory. How can I install this in the storage memory? (not storage card since I sometimes swap storage cards)
Sorry lot of questions I know, but I'm a newbie and all help will be greatly appreciated

The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.

Mister B said:
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
Will do, the HK version seems very stable, the only thing that bothers me is the region settings. Anyway, I think I'll give the UK Rom a go and if that works well I'll stick with it
Mister B said:
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
Click to expand...
Click to collapse
I checked the version and this is what it showed:
KAIS130
SPL-3.2.9.Hard
CPLD-8
Click to expand...
Click to collapse
TBH, I don't know what any of that means But do you think the version I have is ok, or do I need to upgrade this to some other version?
Mister B said:
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Click to expand...
Click to collapse
I've attached a screenshot of my memory screen. The bit that puzzles me is that the storage area apparently has a lot more storage but I do not have an option to install all my applications on that area or atleast the bulky ones. I don't think I need a lite one since I do have 112MB free in the storage area which is more than sufficient for all the apps I usually install. Can you advise how I can install apps to the storage area as well?
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Thanks for all your help, it has given me a lot of confidence in these matters. Something I probably wouldn't have attempted

Mister B said:
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
I agree 101% and it appears fewer resources are put into ironing out bugs in the WM 6.1 ROMs than the WM 6.0 ones. I replied to fmervin's post in the ROM forums along these lines.

If all is running OK I would stick with your current HardSPL.
When installing your applications choose the option of installing to "Device"
You could install all your apps into a ROM, this would be cooking a ROM & is a complex process.
I would suggest a backup via Sprite or SPB. I use SPB v2.0 build3065 & it works well for me, preference of backup software is a bit of a Marmite scenario, you either love it or hate it.

Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Click to expand...
Click to collapse
You can't do that, it is flash memory. It's not like you can partition the hard drive.
But this is the easiest way to get your Apps and settings back after a flash.
Try this Sashimi Auto installer by a former XDA member. It is a nice little program that installs all your apps after a flash
http://www.winmo-experts.com/viewtopic.php?f=7&t=4

Help Please
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance

vicky_crispy said:
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
Click to expand...
Click to collapse
I think you need to decide what it is that you want to accomplish. Unless you cook your own rom, there is no way to add apps to the rom ( so that they will remain after a hard reset) Your rom is wyour phone's base operating system, it contains your OS (WM 6.1 ) and can only be replaced after completely erasing and replacing all files from the previous rom.
If it is a new rom you want, pick a rom that interests you and follow these instructions verbatim .
http://forum.xda-developers.com/showthread.php?t=433835
Your phone will go to the bootloader screen ( three color) and it will disconnect from usb during the process, but be patient until the end. When it says it takes ten minutes, it takes ten minutes. Leave the room if you have to , to keep from getting impatient.
If you just want to keep your OEM WM 6.1 and keep it simple, but change the look of your phone try this,
http://www.htcwiki.com/page/Manila+2D+and+M2D+Themes
This will change the look and feel of your phone with uninstallable .cab files and will not affect the rom or brick your phone by accident.

How to restore orginal ROM

I installed Touch IT Xperience, great ROM imo but it lagged for me too much so yeh. Is there anyway of getting the orginal X1 ROM back?
Sorry if this has already been discussed, I'm still new to the phone lol..

tai927 said:
I installed Touch IT Xperience, great ROM imo but it lagged for me too much so yeh. Is there anyway of getting the orginal X1 ROM back?
Sorry if this has already been discussed, I'm still new to the phone lol..
Click to expand...
Click to collapse
Btw: in your opinion, what do you think is the BEST rom out there? I want something that doesn't lag, still has the button and something 3D like.

Anyone?

The first sticky thread on this section is called "NEW ORIGINAL X1 ROMS".
http://forum.xda-developers.com/showthread.php?t=475482
Then click on the first link in it.
Find the ROM version that relates to your country and operator and download it. For example, if you have an X1 from O2 in the UK then there is a ROM for that version.
Install the ROM on your phone by using either of these methods...
http://forum.xda-developers.com/showthread.php?t=446070
http://forum.xda-developers.com/showthread.php?t=445662
If you're going to be returning your X1 to the operator, it might be a good idea to get rid of the Hard-SPL as well. Follow the instructions towards the end of this page to put the stock SPL back on your handset.
http://forum.xda-developers.com/showthread.php?t=431218
All of these links were stickies at the TOP of the X1 ROMS section.
I hate myself for saying it, but this forum is for application developers and technically inclined people to improve their day-to-day use of their handsets. Fresh faces are always welcome, but don't expect to be simply handed a complete solution when chances are that your question has been asked before. PLEASE use the Search facility towards the top right of each page to see if your question has been answered before.
As for ROMs, I'm currently running Itje's Touch-IT Xperience v4.5. I don't understand what you mean by lagging too much, because v4.5 is FAR faster and smoother than the stock Sony-Ericsson ROM that the phone comes with. Sure, there are still one or two issues that are being addressed but they are small fixes that can be fixed with cabs.

Sorry but I'm still confused
So I download this: APP_SW_X1a_TELSTRA_AU_CDF1221-3134_KOV_R1AA021
but it's not an nbh file?

Read Post # 4 all of it...

tai927 said:
Sorry but I'm still confused
So I download this: APP_SW_X1a_TELSTRA_AU_CDF1221-3134_KOV_R1AA021
but it's not an nbh file?
Click to expand...
Click to collapse
So you got your phone from Telstra in Australia? If so then that's the right one.
It isn't a .nbh file but it gives you a .image file in the end.
If you use the SD-card method to install the ROM (this one here), you rename the .image file to Kovsimg.nbh
Copy it to the SD card.
Turn the phone off.
Hold the down volume button while turning the phone back on.
This *should* set the phone into flashing itself from the Kovsimg.nbh file on the SD card.
I'm repeating what was said in that link. I wouldn't give you a list of links without a good reason.

Best dutch rom

Hey, I got a MDA compact IV branded from tmobile, but its starting to get on my nerves, and I want the original theme, so I figured I've got to put a new ROM on, now what rom is the best for a Dutch tmobile MDA compact Iv?
thanks in advance

i use A.Z.T.O.R. X2 (V11)Ultimate NLD based on latest Official ROM
you can find it here :http://forum.xda-developers.com/showthread.php?t=422417
there aren't many dutch roms, but this is probably the best one.

It seems to be nice and clean... Just a heavily tweaked ROM.
But these are Diamond ROM's, are they good for the MDAcompactIV?
Another thing, when the next Dutch ROM update comes from T-Mobile (if it ever comes) will I be able to update?

VerusAmos said:
It seems to be nice and clean... Just a heavily tweaked ROM.
But these are Diamond ROM's, are they good for the MDAcompactIV?
Another thing, when the next Dutch ROM update comes from T-Mobile (if it ever comes) will I be able to update?
Click to expand...
Click to collapse
I also got a MDA Compact IV...since 2 weeks I run the aztor v11 rom, and man what a difference. Much faster.
Just try..

Okay, all good.
But here comes the noob question... I already dl-ed the [rar] file, there's a [exe] file in the as well as a [nbh] file. Are these the only files needed for flashing my rom? How do I do it? Do I run the [exe] file on my PC or my phone?
Tnx in advance...

Ok, I've tried two times to do the update as I just ran the [exe] file on my PC, but I get the [262] update error.
When it updating the bar sticks on 0%, as well on my phone. Luckily after detaching the battery for 3 seconds, my phone just soft resets. What now???

I've done some research but with all the different versions and languages I got really confused. I need another spl to install the [nbh] in order to update the X2 update. But I cant find a way to run the [nbh] file.
I'm also afraid that I'll ruin my MDA. So I searched for a original spl and ROM, but I can't seem to find the right one. I also unable to determine which spl I have on my MDA. It should be a dutch T-Mobile ROM (& spl???). The warranty period isn't over yet so I might need it. (But I hope not of course).
This flashing thing is really confusing...

Same problem
I have exactly the same problem trying to change the ROM from uk vodaphone to Duttys V4. The strange thing for me is that I have 2 Diamonds (his and hers) and the first one went through the process like a dream.
I'd be very grateful to find a fix

VerusAmos said:
Okay, all good.
But here comes the noob question... I already dl-ed the [rar] file, there's a [exe] file in the as well as a [nbh] file. Are these the only files needed for flashing my rom? How do I do it? Do I run the [exe] file on my PC or my phone?
Tnx in advance...
Click to expand...
Click to collapse
First I ran Olinex hard-spl 1.40, after that I rename the .nbh file tot DIAMIMG.NBH, copy that file to your internal storage and than flash from the internal storage. Read this
If above is still abacadabra send me a pm, then I will translate this in dutch.

best rom questions?
to find out whats best for you is to start flashing.
this question is not welcome here on this forum.
as it always end in a flame war.
thread closed.

Just got an old Tilt/8925, need updates?

hi all, I just got my wife's old tilt. No software or ROMs have been updated on this device at all and I'm curious what updates anyone can recommend that I install.
I did read through the WIKI and it was hard to tell what is the most recent updates available. Nothing is really working incorrectly on the unit, I just want the newest, fastest software/rom etc installed.
is there a windows mobile update that I should install? I saw some references to touchflow 3d working on the tilt, is this worth installing?
I'm starting from square one here and am looking for some general info which is why I posted in this room as opposed to the software or rom rooms. Any info would be great. thanks!
taz

The first thing you need to do is back up your phone. You can sync your or what I would do is use back up your data to your card. DO NOT USE SPRITE BACKUP THAT IS ON YOUR PHONE! I did this and could not get it to restore to my phone. Use PIM Backup. You can get the cab file by doing a search on the software thread.
I just upgrade my rom on my Tilt 8925 last week and I used build 23069 and I really like it so far. Make sure you also download the Jumpspl56,Jumpspl93 and Jumpspl94 file. You will have to add that to your phone first and I used the Jumpspl56 file. I did not have a problem with it.
Read the Wiki it will help so mucn and there is also YouTube videos on it. When looking up the information look up Kaiser. I also used this web site for help.
http://blog.contriving.net/2009/06/18/upgrading-your-att-tilt-to-windows-mobile-6-5-tutorial/
Good Luck

thanks Biloxigirl! do you know if I can put a new version of windows mobile on the device? I've read that some people have updated to 6.1 but do not want to update to 6.5 because it lacks good support for landscape mode?
taz

It all depends what you want? You can flash any Kaiser ROM after Hard-SPL [Resources] Flashing Your First Kaiser Rom (For Noobs) , there are many 6.1 ROMs to choose from and even though M2D doesn't support landscape well it can be disabled via today settings, not sure what you mean about landscape support on 6.5 as Chome has full lanscape compatability.
Good luck

tazmajazz said:
thanks Biloxigirl! do you know if I can put a new version of windows mobile on the device? I've read that some people have updated to 6.1 but do not want to update to 6.5 because it lacks good support for landscape mode?
taz
Click to expand...
Click to collapse
I upgraded from 6.0 to 6.1 with no problems. Now I have 6.5 and LOVE IT. Not sure what you are talking about landscape.....I have had no problems so far with anything in landscape.

Can you run 6.5 on the Tilt?
How much memory do you end up with?

ikepigott said:
Can you run 6.5 on the Tilt?
How much memory do you end up with?
Click to expand...
Click to collapse
yup, look in the rom dev forum.

when reading these steps from the tutorial, am I suposed to pull out the battery while the device is still powered on or should I turn it off first?
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
taz

tazmajazz said:
when reading these steps from the tutorial, am I suposed to pull out the battery while the device is still powered on or should I turn it off first?
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
taz
Click to expand...
Click to collapse
Doesn't matter, the idea is to kill all processes. Either way will achieve the end result.

gotcha, thanks Denco