Related
So I got my phone about 3 weeks ago well the low program memory kinda make it hard to do things I do on my mda so I was wondering is there anything I can do about this or is a different os a better choice? sorry im a ppc newb
xda is a great place to find things.
If you are referring to program memory, or RAM, then you should install the quick page pool changers. Generally 6 or 4 mb is used.
If you are referring to storage memory, you should probably flash another rom.
Wings/Heralds do not need to be cid unlocked, but rather can be flashed using what is referred to as "aserg's method"
When you download a rom, there is a .cab called Aserg policies.cab. Flash this to your wing, soft reset, and then click on 1_UPGRADE_ROM.bat. Follow the instructions from there.
Before you flash make sure to install a fresh ruu.
I'm assuming you know about RUUs and stuff from the MDA/Wizard.
THe best rom right now is the Touch-it for Wings 1.1
But the 2.0 version is coming soon (its already here for heralds), with even more delectable awesomeness.
I'm sorry I didn't go into details I'm speaking on both storage and program but program mostly, I am a newb for both mda and wing since I got both within a week for me and my bro if you could explain a little simpler I would appreciate it. I notice the original rom on the wing is buggy so I think a different rom would be better. how would I go about saving the original rom just in case? Thanks again I'm sorry if you guys get this a lot
mugzie101 said:
I'm sorry I didn't go into details I'm speaking on both storage and program but program mostly, I am a newb for both mda and wing since I got both within a week for me and my bro if you could explain a little simpler I would appreciate it. I notice the original rom on the wing is buggy so I think a different rom would be better. how would I go about saving the original rom just in case? Thanks again I'm sorry if you guys get this a lot
Click to expand...
Click to collapse
Since you have a Wing, I'd suggest trying the Touch It ROM found here:
http://forum.xda-developers.com/showthread.php?t=332789
Really read the entire process first, read it close and don't skip steps.
Before hand, run PIM Backup and copy the resulting file to your PC.
You can get that here:
http://www.freewareppc.com/database/pimbackup.shtml
I don't know much about the MDA, though.
fzzyrn said:
xda is a great place to find things.
If you are referring to program memory, or RAM, then you should install the quick page pool changers. Generally 6 or 4 mb is used.
If you are referring to storage memory, you should probably flash another rom.
Wings/Heralds do not need to be cid unlocked, but rather can be flashed using what is referred to as "aserg's method"
When you download a rom, there is a .cab called Aserg policies.cab. Flash this to your wing, soft reset, and then click on 1_UPGRADE_ROM.bat. Follow the instructions from there.
Before you flash make sure to install a fresh ruu.
I'm assuming you know about RUUs and stuff from the MDA/Wizard.
THe best rom right now is the Touch-it for Wings 1.1
But the 2.0 version is coming soon (its already here for heralds), with even more delectable awesomeness.
Click to expand...
Click to collapse
fzzyrn - is there a reason why you feel TOUCH-IT is the best ROM? It will help if you can share / elaborate / educate. I have installed PDAVIET and it seems to work great as well but I am wondering what is the actual difference between the two besides the extra apps....
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
fmervin said:
Hi all,
I had an O2 XDA Stellar which I believe is the HTC TYTN II. However, this phone was stolen a couple of weeks back. I purchased a second hand one today which is sim locked to the orange network. I managed to break the lock by following the instructions on this link http://forum.xda-developers.com/showthread.php?t=433835. I followed the instructions word for word till step 5.
The problem is now though it accepts the SIM and I can dial out, I don't have any audio on the calls So I can call and my phone also rings when I receive a call but I can't hear the caller nor can I be heard at the other end
Also, I hate the orange rom (and I used to complain about the O2 rom) and I wish to use the default HTC WM 6.1 professional upgrade the problem again is that it asks for a serial number and my serial number starts with DCOxxxxxxxxxxx and it says that this is not a valid serial number
What do I do now? Has my phone become a brick Please do help I can't bear the thought of having one stolen and the other toasted by me
All help will be greatly appreciated
Click to expand...
Click to collapse
Did you actually read anything or did you just start hacking away ? I will cut and paste a few items out of that thread, so that you don't have to actually read it .
PLEASE READ THE *FAQ* BEFORE FLASHING OR ASKING QUESTIONS!!!
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Thanks for the reply
denco7 said:
Did you actually read anything or did you just start hacking away ?
Click to expand...
Click to collapse
As a matter of fact I did read that more than once.
denco7 said:
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP 6 TO PUT YOUR DESIRED RADIO BACK*
Click to expand...
Click to collapse
As you can see I'm a bit of a newbie here, so wasn't too sure if I did need to flash to a new rom. But I did anyway. And the call problems still remain
denco7 said:
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
Click to expand...
Click to collapse
I've been through this link as well and I was contemplating installing the latest version of the HTC WM6.1 ROMS (version 3.34.721.2, radio version 1.70.19.09) available at http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs However I was not sure if this would be ok and (at the risk of sounding extremely dumb) I was not sure what WWE stood for
denco7 said:
3. What are the different types of Unlock?[/B] (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Obviously you did not unlock your phone if a serial number is needed to flash a new rom. I would re read everything and do it again
Click to expand...
Click to collapse
I maintained the default that was given by the unlocker for the CID (I think all zeros). Do I have to change this as per the ROM image? I don't mind re-doing this again it's a relief that my device isn't busted
No your phone isn't busted. Go into bootloader and check what it says next to spl, if you followed Mark's steps, it should say 3.29 Hard. If that is what it says ,then you can flash any Kaiser rom you want. If it doesn't then start over again.
WWE stands for World Wide English and those roms are all in English. That rom you picked will be fine, if you do not wish to explore the fine world of custom roms ? Maybe later.
You only have to CID unlock once by following the steps, not at every rom flash.
No sound means wrong radio, 6.0 roms need 6.0 radios and 6.1 roms need 6.1 radios. If the rom has a radio in it already then flash away.
Thanks Denco Flashed the ones I mentioned and it works perfect. Can't believe I actually have a working device Thanks for all your help, really great.
Now to sync my data to my new (second hand) htc and I'm good to go
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
fmervin said:
Another question, the device works fine, however since it is a HK rom, it seems to have localised to HK. I've changed this as much as possible to UK. However, I'm wondering if this will affect anything else? For example the gps? Is there any quicker way to configure this globally so all settings use UK instead of HK?
Click to expand...
Click to collapse
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Mister B said:
Why didn't you flash the latest UK ROM.
Use this code: HT750GB02264 to download from HTC's site.
Click to expand...
Click to collapse
Wow, thanks for that, I was looking for a valid serial through which I can download from the htc uk site One question I had is do I install the radio which I download from htc? Or do I keep the one I have already flashed? The one I have flashed yesterday seems to be a later version than what I've downloaded from htc
denco7 said:
Once you are unlocked and HardSpl'd you can flash any rom you want. Pick a UK one another WWE rom or a custom rom. Test a bunch until you have one you like. Your only restriction is it has to be a Kaiser rom. And with all the Kaiser roms available, it is not a restriction at all.
Click to expand...
Click to collapse
1. I keep hearing on this forum about Hard SPL, I'm not sure what this is used for or why it is required but I followed the instructions and it seems I had installed JumpSPL1.56-KAIS.exe. Now, since then I had flashed the rom, so do I need to reinstall this again? Is there some other one I should be using? I come across different versions on some threads. Also, how can I check the version of HardSPL I have?
2. When I view the memory (under settings) it shows me Storage and Program. However, I can't seem to see any storage area in file explorer. I know in my old xda 2i, there used to be a separate storage area. The reason is because some of the apps I install are quite bulky for example lexisgoo english dictionary (the dictionary files themselves are about 18mb) and this fills up the main memory. How can I install this in the storage memory? (not storage card since I sometimes swap storage cards)
Sorry lot of questions I know, but I'm a newbie and all help will be greatly appreciated
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Mister B said:
The UK downloaded ROM will install the radio too.
I would do a bit of testing with your current set-up, then flash the UK ROM.
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
Will do, the HK version seems very stable, the only thing that bothers me is the region settings. Anyway, I think I'll give the UK Rom a go and if that works well I'll stick with it
Mister B said:
Check HardSPL by going into bootloader:
* Using a stylus, press and hold the soft reset button at the bottom of the phone along with the camera button
* Release both buttons once the bootloader screen appears
* Exit bootloader by pressing soft reset button
Once you have installed HardSPL thats it, job done (you installed it during unlocking)
Click to expand...
Click to collapse
I checked the version and this is what it showed:
KAIS130
SPL-3.2.9.Hard
CPLD-8
Click to expand...
Click to collapse
TBH, I don't know what any of that means But do you think the version I have is ok, or do I need to upgrade this to some other version?
Mister B said:
What you see in file explorer regarding storage is correct: 128MB RAM for running software ect & 256MB ROM for storing your programs ect (WM2003SE was different)
ROM can be increased by using one of the cooked lite ROMs if storage space is a concern.
Click to expand...
Click to collapse
I've attached a screenshot of my memory screen. The bit that puzzles me is that the storage area apparently has a lot more storage but I do not have an option to install all my applications on that area or atleast the bulky ones. I don't think I need a lite one since I do have 112MB free in the storage area which is more than sufficient for all the apps I usually install. Can you advise how I can install apps to the storage area as well?
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Thanks for all your help, it has given me a lot of confidence in these matters. Something I probably wouldn't have attempted
Mister B said:
Test the new UK ROM & radio & then reflash the radio only if you want (do some searching on Radio versions)
Newer versions are not always best, chasing the latest builds normally bites you in the ass at the end of the day.
Click to expand...
Click to collapse
I agree 101% and it appears fewer resources are put into ironing out bugs in the WM 6.1 ROMs than the WM 6.0 ones. I replied to fmervin's post in the ROM forums along these lines.
If all is running OK I would stick with your current HardSPL.
When installing your applications choose the option of installing to "Device"
You could install all your apps into a ROM, this would be cooking a ROM & is a complex process.
I would suggest a backup via Sprite or SPB. I use SPB v2.0 build3065 & it works well for me, preference of backup software is a bit of a Marmite scenario, you either love it or hate it.
Lastly, I was wondering if it is possible for me install my apps on the rom and then kind of take an image of my setup and flash the rom with this setup. That way when I do a hard reset, all my apps are installed again. Which will save me the trouble I know sprite backup does something like this but I'd prefer if it was in the rom
Click to expand...
Click to collapse
You can't do that, it is flash memory. It's not like you can partition the hard drive.
But this is the easiest way to get your Apps and settings back after a flash.
Try this Sashimi Auto installer by a former XDA member. It is a nice little program that installs all your apps after a flash
http://www.winmo-experts.com/viewtopic.php?f=7&t=4
Help Please
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
vicky_crispy said:
Hey Denco..Than'x for considering my thread & giving out suggestion towards the link to check the info. But i m really nt that techy afterall so i can burn a ROM on my Tytn II. Even though i tried to burn a RUU rom that supports TyTN II ..Its just gets disconnected from USB mode..So i was looking forward to start it initially with some comparatively easier to install .cab files..Can't these RUU files be transformed into .cab files or maybe some other version of Manila 3D cab file that is completely fixed...I seriously have done a lot of research upon this but nothing looks like working. So please if you have some links to .cab files that can give a better & different look to my Kaiser running Windows 6.1...It'l be a great help !!
Than'x & regards in advance
Click to expand...
Click to collapse
I think you need to decide what it is that you want to accomplish. Unless you cook your own rom, there is no way to add apps to the rom ( so that they will remain after a hard reset) Your rom is wyour phone's base operating system, it contains your OS (WM 6.1 ) and can only be replaced after completely erasing and replacing all files from the previous rom.
If it is a new rom you want, pick a rom that interests you and follow these instructions verbatim .
http://forum.xda-developers.com/showthread.php?t=433835
Your phone will go to the bootloader screen ( three color) and it will disconnect from usb during the process, but be patient until the end. When it says it takes ten minutes, it takes ten minutes. Leave the room if you have to , to keep from getting impatient.
If you just want to keep your OEM WM 6.1 and keep it simple, but change the look of your phone try this,
http://www.htcwiki.com/page/Manila+2D+and+M2D+Themes
This will change the look and feel of your phone with uninstallable .cab files and will not affect the rom or brick your phone by accident.
Hey, I got a MDA compact IV branded from tmobile, but its starting to get on my nerves, and I want the original theme, so I figured I've got to put a new ROM on, now what rom is the best for a Dutch tmobile MDA compact Iv?
thanks in advance
i use A.Z.T.O.R. X2 (V11)Ultimate NLD based on latest Official ROM
you can find it here :http://forum.xda-developers.com/showthread.php?t=422417
there aren't many dutch roms, but this is probably the best one.
It seems to be nice and clean... Just a heavily tweaked ROM.
But these are Diamond ROM's, are they good for the MDAcompactIV?
Another thing, when the next Dutch ROM update comes from T-Mobile (if it ever comes) will I be able to update?
VerusAmos said:
It seems to be nice and clean... Just a heavily tweaked ROM.
But these are Diamond ROM's, are they good for the MDAcompactIV?
Another thing, when the next Dutch ROM update comes from T-Mobile (if it ever comes) will I be able to update?
Click to expand...
Click to collapse
I also got a MDA Compact IV...since 2 weeks I run the aztor v11 rom, and man what a difference. Much faster.
Just try..
Okay, all good.
But here comes the noob question... I already dl-ed the [rar] file, there's a [exe] file in the as well as a [nbh] file. Are these the only files needed for flashing my rom? How do I do it? Do I run the [exe] file on my PC or my phone?
Tnx in advance...
Ok, I've tried two times to do the update as I just ran the [exe] file on my PC, but I get the [262] update error.
When it updating the bar sticks on 0%, as well on my phone. Luckily after detaching the battery for 3 seconds, my phone just soft resets. What now???
I've done some research but with all the different versions and languages I got really confused. I need another spl to install the [nbh] in order to update the X2 update. But I cant find a way to run the [nbh] file.
I'm also afraid that I'll ruin my MDA. So I searched for a original spl and ROM, but I can't seem to find the right one. I also unable to determine which spl I have on my MDA. It should be a dutch T-Mobile ROM (& spl???). The warranty period isn't over yet so I might need it. (But I hope not of course).
This flashing thing is really confusing...
Same problem
I have exactly the same problem trying to change the ROM from uk vodaphone to Duttys V4. The strange thing for me is that I have 2 Diamonds (his and hers) and the first one went through the process like a dream.
I'd be very grateful to find a fix
VerusAmos said:
Okay, all good.
But here comes the noob question... I already dl-ed the [rar] file, there's a [exe] file in the as well as a [nbh] file. Are these the only files needed for flashing my rom? How do I do it? Do I run the [exe] file on my PC or my phone?
Tnx in advance...
Click to expand...
Click to collapse
First I ran Olinex hard-spl 1.40, after that I rename the .nbh file tot DIAMIMG.NBH, copy that file to your internal storage and than flash from the internal storage. Read this
If above is still abacadabra send me a pm, then I will translate this in dutch.
best rom questions?
to find out whats best for you is to start flashing.
this question is not welcome here on this forum.
as it always end in a flame war.
thread closed.
Hello!
In my previous post i asked for the best ROM for the X1, ive already downloaded the image file for a ROM called "EnergyROM_KOVSKY_20090805_Standard".
Now i just want to know how to Apply it to the phone.
What do i need to change in the phone before installing the ROM?
Is it even possible to change ROM in a prototype?
I also have problems updating my ROM (when i tried it before)...RUU gives me error code 262.
AS you may notice, im really retarded when it comes to this, but hopefully i will learn sometime.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017
And please: Dont redirect me to some multi thread that is named "How to flash your phone) Cause ive already tried it, but i dont understand **** there
If someone would be kind enough to give me a step by step walkthrough on how i do to upgrade just that ROM that ive downloaded. And what other programs i need to be able to fix my phone.
Thanks in advance!
deleted post
You need to check in the bootloader(tri-colored screen) what your spl is... In order to flash a custom rom it will need to say this SPL-0.72.01OliNex....if it does not say this then you need to hardspl the phone...if you follow the instructions it is easy. Once this is done then you will need this....copy the ROM you have downloaded into the CustomRUU folder and execute the file. If this does not work....you will need to format your memory card(Fat32) and follow these instructions, plus there is a video tutorial regarding all the procedures you need....the instructions are as basic as one can get.
Good luck.
Regards,
WC
Fructis said:
Hello!
In my previous post i asked for the best ROM for the X1, ive already downloaded the image file for a ROM called "EnergyROM_KOVSKY_20090805_Standard".
Now i just want to know how to Apply it to the phone.
What do i need to change in the phone before installing the ROM?
Is it even possible to change ROM in a prototype?
I also have problems updating my ROM (when i tried it before)...RUU gives me error code 262.
AS you may notice, im really retarded when it comes to this, but hopefully i will learn sometime.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017
And please: Dont redirect me to some multi thread that is named "How to flash your phone) Cause ive already tried it, but i dont understand **** there
If someone would be kind enough to give me a step by step walkthrough on how i do to upgrade just that ROM that ive downloaded. And what other programs i need to be able to fix my phone.
Thanks in advance!
Click to expand...
Click to collapse
Thanks for the first good reply...Onfortunatly when i try and update it just say update error 284...
a noob with a professional phone?
know nothing but using a prototype phone.. lols...
devalian said:
a noob with a professional phone?
know nothing but using a prototype phone.. lols...
Click to expand...
Click to collapse
You mean that no person with a general knowledge about flashing rom = busting warranty shouldnt be allowed using a phone?
How do you know anything about what i do with the phone, with what apps im using, and what im using it for?
Mind your own business and come back to the thread when you have something to contribrute.
Fructis said:
Thanks for the first good reply...Onfortunatly when i try and update it just say update error 284...
Click to expand...
Click to collapse
There's a list of error messages here somewhere. Maybe you can find it here. I think the answer is here. It sais just try again after turning off and turning it back on again
btw, being rude to other users isn't going to help you get your questions answered any faster. Updating roms isn't that hard anymore, but you need to be carefull and know what you're doing. If you don't understand how flashing works and what you need to do for that, you can read the stickies in this rom section. I think it's explained very clearly and step by step lots of times.
edit: looking at all your posts, it seems you've asked the same about three times, and most things kan be found easily by google or the xda forum search. Maybe try a bit harder before asking here?
if you don't like criticism, just ignore my post; everybody has to learn to work with windows mobile, but the only way is to try a lot yourself, search, try some more, search again, then ask and try some of the answers given. Don't get agitated when not everyone is giving you the right answer in clear steps, most of the users are trying to explain as good as they can with the information provided.
the guides are pretty thorough...
if you read them its clear enough...
(assuming you want to use non official Sony roms - you need to flash your hardspl so you wont get errors... (think this is where you're stuck)...
download a hardspl and flash it via activesync)
Then
copy the rom into your sd card root directoy...
rename it to kovsimg.nbh
hit the reboot switch while holding down power and the down vol button to start the update process
this is the easiest way...
but as above, if you want shortcuts for everything and dont read the instuctions clear you MAY END UP BRICKING YOUR PHONE...
Gwystyl said:
There's a list of error messages here somewhere. Maybe you can find it here. I think the answer is here. It sais just try again after turning off and turning it back on again
btw, being rude to other users isn't going to help you get your questions answered any faster. Updating roms isn't that hard anymore, but you need to be carefull and know what you're doing. If you don't understand how flashing works and what you need to do for that, you can read the stickies in this rom section. I think it's explained very clearly and step by step lots of times.
edit: looking at all your posts, it seems you've asked the same about three times, and most things kan be found easily by google or the xda forum search. Maybe try a bit harder before asking here?
if you don't like criticism, just ignore my post; everybody has to learn to work with windows mobile, but the only way is to try a lot yourself, search, try some more, search again, then ask and try some of the answers given. Don't get agitated when not everyone is giving you the right answer in clear steps, most of the users are trying to explain as good as they can with the information provided.
Click to expand...
Click to collapse
I'ts a difference in writing a post with no meaning and a post like you just did.
Example: You start a new thread, no matter what it's about. There are two guys responding.
One guy is giving you this as a answer: Lol, thats kinda noobish that you dont know how to use your phone.
The second guy answers just like you did, you gave me information and links on where and what to search for. But still points out that theres many "obvious" stuff that im asking for.
Big difference.
Back to topic. I've already figured out how to do all, i have all the files that i need.
The problem is that when i try and update the SPL to 1.00.X1 instead of thje other 1.02.Olinex (or what its called) I always get a connetion error 262.
Ive read the links that you gave me before, and it says that you need to either softreset, change usb port or reboot your computer. Guys in another thread gives the same instructions.
Still no success.
So since i've done my searching, done the exact procedure that you should do. And it's still not working. Is that still something just "obvious" to ask for?
And i apologize if i hasn't been clear enough in this thread that the phone im using is a proto. And i still haven't been confirmed by some other proto user that this method is acctually working.
I'm thankfull for all the (helpfull) responses i get. And im trying them all.
If something else comes up i will post it in this thread. No matter if its obvious or not.
Have a nice day everyone!
Looks like there's a connection error when your phone reboots to go into tri-color boot menu.
Google for USB Mass storage device, download the driver and install it and then try again.
Of course you have to find the right driver for your OS.
CharlieSImon said:
Looks like there's a connection error when your phone reboots to go into tri-color boot menu.
Google for USB Mass storage device, download the driver and install it and then try again.
Of course you have to find the right driver for your OS.
Click to expand...
Click to collapse
haha, damn, thats obvious, that i didnt think of that before. hehe, thank you!
Btw, if the phone gets into the tricolor menu, and the progressbar shows up (but still stuck at 0%) can it still be because the driver?
Thanks
if its stuck at 0% it means you're not flashing a compatible rom...
obviously you havent flashed the spl...
flash a OFFICIAL sony rom first... if you still have issues at least you know its either the 'prototype' hardware
or your PC...
which i'd suggest try flashing from another PC...
ryousuke said:
if its stuck at 0% it means you're not flashing a compatible rom...
obviously you havent flashed the spl...
flash a OFFICIAL sony rom first... if you still have issues at least you know its either the 'prototype' hardware
or your PC...
which i'd suggest try flashing from another PC...
Click to expand...
Click to collapse
Oh, im sorry if i didnt expressed myself good enough.
When im using X1_HardSPL i get the 284 update error.
When in using the custom RUU i get the 262 error.
So i guess the X1_HardSPL application is to change SPL?
If i cant seem to change SPL i wont be able to change rom either. Correct?
Since i have the SPL that was shipped with the phone, can i still upgrade from R1A to R3A without changing SPL?
Have you disabled any of your firewall and anti virus programs when you try using the software?
I previously always had to disable my zonealarm firewall before I could uset he spl software....
Yes I've done.
yes if you have the stock SPL you can upgrade from R1a to R3a with the standard SE update utility.
which can be downloaded at the SE site under support.
lrammers said:
yes if you have the stock SPL you can upgrade from R1a to R3a with the standard SE update utility.
which can be downloaded at the SE site under support.
Click to expand...
Click to collapse
The Phone is still a Proto.....
Therefor not accepted by SEUS
Try flashing the official Sony Ericsson ROMs first. No need to Hard-spl for those.
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Fructis said:
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Click to expand...
Click to collapse
And if you try to flash via ActiveSync with CustomRUU? That worked most of the times with my X1. Oh wait, that got you the error 262.
In one of your other threads someone says (or you quoted) that one of the advantages of a proto was that there's no security check, which means it might not even be necessary to use HardSPL first.
I've had error 262 a few times; just try to flash again, maybe from another computer if that's possible. You can also try to flash another rom first.
Which roms have you tried flashing? Have you tried with a freshly formatted sd-card smaller than 2 gb (although I think that won't have any effect); you can also try renaming kovsimg.nbh with all small letters, all capitals or the way you just spelled it. It might be important.
offtopic: I get your point on the reactions you get when opening new threads. Everything is simple when you now where to look or if you've done it before, but it can be very hard to find the answer when there's so much info to choose from.
That said: a topic title of something like "having trouble flashig a custom rom to prototype" sounds a bit more serious then "need massive help" with a lot of exclamation marks. That might set people off on the wrong foot.
I am trying to get the cool 4 shortcut buttons and was directed to something called Cookies Home Tab. I installed it but no program showed up.
I would then try and uninstall it an install it again with sense deactivated, but when choosing uninstall on the program (which shows up on the "remove program" menu, but not in the start menu) the "busy-cursor" is just rotating and nothing happens. I tried powering off and try again, and the same thing happens: It says its uninstalling, but it takes forever and nothing happends.
Can someone help? How do I get the program properly installed. I am running a danish original rom and assumed it would be compatible when directed there. I am not sure where to find my sense version. Can it be that its 2.16xxxxx or is that windows?
came99 said:
I am trying to get the cool 4 shortcut buttons and was directed to something called Cookies Home Tab. I installed it but no program showed up.
I would then try and uninstall it an install it again with sense deactivated, but when choosing uninstall on the program (which shows up on the "remove program" menu, but not in the start menu) the "busy-cursor" is just rotating and nothing happens. I tried powering off and try again, and the same thing happens: It says its uninstalling, but it takes forever and nothing happends.
Can someone help? How do I get the program properly installed. I am running a danish original rom and assumed it would be compatible when directed there. I am not sure where to find my sense version. Can it be that its 2.16xxxxx or is that windows?
Click to expand...
Click to collapse
If you cannot find your manila version, or at least search on how to find it, you really need to learn more before you mess up your phone.
I assume you did a hard reset after your registry issue. If not I suggest you do as you will probably have to do it a few times as you attempt to customize your device.
Your manila version can be found in Settings\Device Info\Software Info.
Read the thread on Cookies Home tab for compatable versions and install instructions. Post your questions there.
p.s. Thanks for implying...
I am really sorry for sounding like a total noob, but I DID read the post, installation instructions and whats not. I also read the "how to find your manila version" which also said to go to settings tab - device info - software info. The thing is that its danish on my phone and I cant find anything called device info on my tab, only "about" which leads me to a webpage with a lot of copyright and legal mumble jumble.
When going to settings - advanced - about the device I get a tab called version, where it says Rom Version 2.16.403.1 (67041) dan. But I dont know if thats it.
But lord, how many original stock roms can there be? Its a pretty new phone and I installed every HTC update available to me. I must say that configuring this little diamond seems to take a rocket scientist or above. I can use a computer pretty well, but getting a little modifications to the HTC UI seems to take a phd
You seem like a nice guy, and I would like to learn. Maybe you can help me out so I dont have to ask so many noobish questions. I really tried to learn by myself but it is a new world to me and it is quite overwhelming.
1) I read that installing a rom is ireversible. Does that really mean that I under no circumstances can replace the original software? Is a cooked rom really a whole other OS and replace windows mobile 6.5 completely? Or is it just a modified windows?
2) What is the distinction between HTC Sense, Touch Flo and Manila, if any? As far as I read the black and white icons is manila and the colored ones is sense... Is that true? And does that mean that I cant use any programs that needs manila to run if I have the HTC Ui with the colored icons?
I hope the above questions helps me to a basic understanding, so I further on dont have to ask so many questions.
PS) after installing TD2 tools my screen rotation line in my system registry came back, and I got rid of the landscape.. Thats one problem solved. Call recording aswell. If I find a way to get these 4 shortcut-buttons available and set one of them to my to-do list I think Im done.. No more tampering.. I promise.
came99 said:
1) What exactly is the difference between installing Cookies Home tab and installing another rom? As I understand it, a rom is a whole other OS, where this software only is a skin? Correct?
Correct, The ROM is the whole OS, where CHT is a modification to the Sense (Manila) UI.
2) I read that installing a rom is ireversible. Does that really mean that I under no circumstances can replace the original software?
No, You must first install hard SPL to be able to flash a cooked(custom) ROM.
Once you install HSPL, your device is considered "out of warranty".
However you can reflash a Stock ROM and then reflash Stock SPL to return the phone to the factory state for warranty purposes. So it can be reverted.
3) What is the distinction between HTC Sense and Manila, if any?
They are one and the same, also referred to as Touch Flo 3D (TF3D)
4) The original question about getting Cookie to work, if someone feels like helping.
If you have installed Cookie's Home Tab and soft reset, when you are on your home screen you should see the flip clock (assuming that in Settings\System\Home\Items is set to HTC Sense), on top right of that is a little dash, this opens up additional panels for your shortcuts.
There should also be a new program possibly in settings or \Programs\Tools called CHTEditor to access your tab settings.
I suspect that it installed, you just didn't know how to access it.
Lemme know.
PS) after installing TD2 tools my screen rotation line in my system registry came back, and I got rid of the landscape.. Thats one problem solved. Call recording aswell. If I find a way to get these 4 shortcut-buttons available I think Im done.. No more tampering.. I promise.
Click to expand...
Click to collapse
See above for answers. One quick word of advice; If the program interfaces with your today screen, phone functions, etc. install to device memory and never to Storage Card. Programs that just tweak the registry and settings can be installed to SD card.
Uhm, and I wouldn't be promising anything because its addicting. Once you pop, you can't stop!
Sorry.. I edited my post while you were answering. I found the preguide to roms which was just about basic enough to enlighten me. Your answers helped a lot to, and everything fell into place.
I do think that I will stay away from flashing as it seems like risky business.. The option to hard-reset without to much hassle seems like the emergency brake I like available to me
At the moment I am trying to reinstall Cookies Home Tab, but the installation just hangs.. Probably because it wasnt uninstalled correctly. Any tips other than Hard Resetting which means several hours of setup
Edit: Ahh f... it.. I may aswell do it.. All the tampering made my phone slow anyway.. Now I know what I need and can get it to work without too much experimenting..
Thanks dude.
I did some research on your stock ROM and it looks like you are running Manila 2.1 which is the older version so many tweaks you are attempting may be for 2.5.
You would be better off changing ROMs.
Here is a download of our stock ROM for warranty purposes, keep it just in case. You may have to register for the site, but you may also find a nice cooked ROM in your language on that site. Dutty is a great chef and I use his ROMs because of their stability.
I can attempt to walk you through HSPL, but there have been many issues lately. Almost seems like the only way to get it to work is to "donate" to the developer.
Okay Mr Dope Pusher.. i see where you are going.. Telling me to stay away from these sheningans and 1 hour later you got me hooked anyway
Jokes aside.. Yes.. I Do think I am gonna need some help here.. While the stock backup rom is downloading I will try and find out for myself, but I would very much like some confirmation on what to do before I take the leap.. Stay tuned and thank you very much.. Your help is very appriciated.
I have a question though.. Now I downloaded the stock rom, but what if my phone breaks when Duttys Rom is installed.. Then I wont be able to reinstall the original rom before sending it in for repair. And then Im screwed warranty wise, right?
..., in anticipation of your next question;
As long as you have over 50% battery and do not interupt the flash (unplug the USB) there are very few chances of it bricking.
I have never had it happen and most errors are correctable with a hard reset. It really sounds worse than it is.
Most devices get bricked because the user attempts to flash a cooked ROM w/o HSPL or a ROM or radio from another device.
I have attached 3 files.
Do the following after you download these files;
1. Remove your SIM and SD card.
2. Sync your device to your PC through Active Sync or WMDC depending on your windows version.
2. Copy the enablenewrapi.cab to your device through file explorer and install
to device memory.
3. Open both the SPL 1.83 and the RUU zip files and place contents of both into a new folder.
4. Run the RUU.exe and you should see a progress screen appear.
5. With any luck, you won't get stuck at 0% and the flash will complete.
As the screen states, it may take up to 10 minutes. You will see your device disconnect from active sync, which is normal. Let it run until it completes and do not open anything or let your PC go into standby. Also, you may want to disable your AV and any firewalls as these can mess with the installation.
Make sure you have greater than 50% battery before you attempt this as any interuption during the flashing process can brick your device.
If the steps above complete, you can go into bootloader mode by holding down both volume keys right after you hit the soft reset buton, but before the device begins to boot. You may have to try a couple of times if you are not fast enough. Or you can power off the device then hold both volume keys and press the power button. In bootloader mode which is a tri colored screen, you should see SPL: 1.83.Olinex, then you will know it has installed correctly.
From this point, you are able to flash any cooked Topaz ROM.
The ROM flashing process is the same as HSPL in regards to placing the ROM's .nbh file into the same folder as the custom RUU.exe, so keep that RUU.exe file for future use.
You need only flash HSPL once to continue to flash as many ROMS as you like.
If you ever have to revert to stock, you would install the ROM you downloaded, then find the StockSPL file from the HSPL thread and follow the instructions.
Always hard reset after you flash a new ROM.
**If you are not successful in flashing HSPL, you will need to go to the HSPL thread and read up on opening a ticket with HTC Support, which will give you an autoinstaller that will work once you donate through the program. I believe they are asking for 4gbp.
Ok.. And one of the above files is the Dutty Rom? Edit: Oh I se.. It isnt.. I will download it then..
Will it look and feel similar to Sense, just with more features and customisation options?
You write: Most devices get bricked because the user attempts to flash a cooked ROM w/o HSPL or a ROM or radio from another device.
Can you please elaborate? I understand it like you need to make sure I install the hspl first before cooking, but "radio" from another device. Please explain it for a dummy as me, so I dont attempt to do it by accident.
came99 said:
Ok.. And one of the above files is the Dutty Rom? Is it available in danish as is, or do I have to do something.
Will it look and feel similar to Sense, just with more features and customization options?
Click to expand...
Click to collapse
No, I have not provided you with a ROM, just the HSPL unlocker.
You can go to HTCPedia and search for a Danish ROM with manila 2.5, or take a look through the ROM development thread and find one from another chef. It should have Sense installed but 2.5 unless it states otherwise. 2.5 has more features and functions and is the most current.
Many ROMs are multilanguage so I believe you select your region language when the ROM first loads. Just look for one that supports DAN. I use WWE (World Wide English) so I am not experienced with multilanguage variations.
Just make sure your HSPL is successful before you attempt to flash a ROM.
If you search hard enough you may even find a ROM with CHT cooked in which will alleviate you from having to install it yourself, but I suspect that your previous install didn't work because your on Sense 2.1
I have never used CHT, but use Max Manila Themes which is just a different mod, but I am thinking about trying CHT.
I'll take a look and see what I can find.
Regarding Radios;
A stock ROM comes with the OS and Radio ROM.
Most cooked ROMs take just the OS and tweak it for best performance, adding programs, removing other useless programs and do not include the radio ROM, therefore you will still have your stock Radio unless you flash a cooked ROM that has included the radio (usually denoted in the title of the ROM by the radio#, i.e. 4.49.25.57 (which is a Topaz radio version)
The only time you can brick is you attempt to install a radio from another device (sometimes they work better) such as a Blackstone radio to a Topaz device unless your SIM is unlocked or attempting to flash a Topaz radio w/o HSPL.
Personally, there are enough Topaz radios posted in the radio thread that I don't need my SIM unlocked to try others.
Symptoms of a problem radio are poor signal strength, rapid battery loss and your device heating up.
I have switched my radio ROM a few times but honestly haven't noticed a difference from my stock radio.
The stock ROM you downloaded would replace your Stock Radio if you happen to flash to a different one.
Your region and carrier are also a factor in choosing a radio, so again, just stick to stock unless you have issues.
Dude.. That radio thingie made me EXTREMELY paranoid and I see that there is dozens of different roms from dutty and thousands of rom in general where many of them seems to come with radio-thingies... I am extremely afraid of choosing something that will brick my system, so please, please help me through this, even though you already have been extremely helpful.
If I were on my own, I would go with this:
http://htcpedia.com/duttys_topaz_wm_leo_r_rtm_e11d19c3e22de899a/soft/htc-topaz-rom.html
But to be honest I dont know if it will work on my device or if I will be able to get it with a danish language pack..
Please help me choose the right one.... I am ready to rock, so I hope for a quick reply, and I promise I will do a extra good deed tomorrow to repay the world for all the help you gave me tonight.
came99 said:
Dude.. That radio thingie made me ETREMELY paranoid and I see that there is dozens of different roms from dutty and thousands of rom aswell where many of them seems to come with radio-thingies... I am extremely afraid of choosing something that will brick my system, so please, please help me through this, even though you already have been extremely helpful.
If I were on my own, I would go with this:
http://htcpedia.com/duttys_topaz_wm_leo_r_rtm_e11d19c3e22de899a/soft/htc-topaz-rom.html
But to be honest I dont know if it will work on my device or if I will be able to get it with a danish language pack..
Please help me choose the right one.... I am ready to rock, so I hope for a quick reply.
Click to expand...
Click to collapse
Don't sweat it Bro, if its posted as a Topaz ROM then its got the Topaz Radio, the only thing you risk is not being able to connect to certain 3G bands.
I've used Dutty's R-8 and its not a bad ROM, but its a little outdated and I didn't see that it had multi language support.
I am really having a hard time locating a Danish language ROM.
I find FRE. GER, ITA, ESN, NLD, WWE, but no DAN????
"I am really having a hard time locating a Danish language ROM.
I find FRE. GER, ITA, ESN, NLD, WWE, but no DAN????"
Then it aint just me being total clueless.. I cant find any either..
Im bafled by this world.. I basically have two modest demands: To record calls in mp3 and get easy access to my to-do list.. preferably on my homescreen, but just as good by one of the nifty Hotbuttons Ive seen in pictures..
To get those two modest demands fulfilled I either:
- Need to give up on my danish interface and crack my phone beyond warranty and a chance of bricking it.
- Disable HTC sense and go with WM interface
I know how limited I would be with any other phone, but this road I got myself on is really amazing
came99 said:
"I am really having a hard time locating a Danish language ROM.
I find FRE. GER, ITA, ESN, NLD, WWE, but no DAN????"
Then it aint just me being total clueless.. I cant find any either..
Im bafled by this world.. I basically have two modest demands: To record calls in mp3 and get easy access to my to-do list.. preferably on my homescreen, but just as good by one of the nifty Hotbuttons Ive seen in pictures..
To get those two modest demands fulfilled I either:
- Need to give up on my danish interface and crack my phone beyond warranty and a chance of bricking it.
- Disable HTC sense and go with WM interface
I know how limited I would be with any other phone, but this road I got myself on is really amazing
Click to expand...
Click to collapse
I found some Danish support threads, just search Danish Topaz in XDA and you may find something to load over a WWE rom.
Personnaly I think you will be disappointed if you do not take the plunge.
I had a Rhodium before my Topaz and once I go tmy Topaz, I couldn't stand it. It wouldn't do half the **** my Rhodium did. Because I had my Rhodium flashed to custom.
Finally HSPL was released and I flashed it immediately and can't believe I ever liked that other brick of a phone.
Take your time, get comfy with the process first, and read lots on the language packs.
The brick warning is just a disclaimer and it is very difficult to achieve if you follow the steps correctly.
I know these are expensive toys to take a chance on, but they really are only at 50% capacity out of the box. What a waste....
Bruce, dude, you're a saint. This is why so many folks look to xda for help. You should be commended, but probably won't be! You got my vote.
jdwilson said:
Bruce, dude, you're a saint. This is why so many folks look to xda for help. You should be commended, but probably won't be! You got my vote.
Click to expand...
Click to collapse
Thanks JD!
Is that commended or condemed???
Just trying to give a little back.
Greetz from SoCal.
I agree.. The helpfulnes here has been overwhelming, and has given me the bravery to try this out. But I am still very nervous.
Let me sum up what I learned from tonight.
1) When following your instructions I will have a phone which I can modify with custom roms.
2) As long as I am 100 % sure the rom is for Topaz I dont have to worry about messing up and bricking my phone due to doing wrong stuff to the radio-thingie? (yes, I still dont understand what that is)
3) I will be able to get back to factory defaults and warranty by installing the official rom you linked and afterwards install the original spl thingie afterwards?
4) Should I mess up and brick my phone, there is a fair chance of being able to restore it by the help of another device and a micro SD-card? (See I DO try and learn myself.. (Its probably incorrect though ))
5) I need to give up on the danish interface, but I will without too much hassle be able to get a danish keyboard?
6) To be absolutely sure not choosing a wrong ROM, please confirm this one as a possible choice: "Duttys Topaz HG R10 [5.2.23541.5.5.0]"
It is downloading and I am ready to take the leap... Geronimoooo!
came99 said:
I agree.. The helpfulnes here has been overwhelming, and has given me the bravery to try this out. But I am still very nervous.
Let me sum up what I learned from tonight.
1) When following your instructions I will have a phone which I can modify with custom roms.
Yes
2) As long as I am 100 % sure the rom is for Topaz I dont have to worry about messing up and bricking my phone due to doing wrong stuff to the radio-thingie? (yes, I still dont understand what that is)
Radio controls cell signal, GPS and WiFi connections.
3) I will be able to get back to factory defaults and warranty by installing the official rom you linked and afterwards install the original spl thingie afterwards?
Yes
4) Should I mess up and brick my phone, there is a fair chance of being able to restore it by the help of another device and a micro SD-card? (See I DO try and learn myself.. (Its probably incorrect though ))
Exactly.
5) I need to give up on the danish interface, but I will without too much hassle be able to get a danish keyboard?
Bingo!
6) To be absolutely sure not choosing a wrong ROM, please confirm this one as a possible choice: "Duttys Topaz HG R10 [5.2.23541.5.5.0]"
That's the one I am currently running. Great ROM!
It is downloading and I am ready to take the leap... Geronimoooo!
Click to expand...
Click to collapse
I'm usually not on the forum as much on the weekends but if you get stuck, shoot me a PM which will notify my e-mail and I'll see if I can help.
I take it you were successful with HSPL? If so, thats most of the battle!
Peace!
"5. With any luck, you won't get stuck at 0% and the flash will complete."
Well... Guess what...
Can someone please help.. Im stucked here and having a stroke.
Edit: Tried on 2 different computers and its the same: Stuck on 0 %.. Antivirus disabled.