Hello!
In my previous post i asked for the best ROM for the X1, ive already downloaded the image file for a ROM called "EnergyROM_KOVSKY_20090805_Standard".
Now i just want to know how to Apply it to the phone.
What do i need to change in the phone before installing the ROM?
Is it even possible to change ROM in a prototype?
I also have problems updating my ROM (when i tried it before)...RUU gives me error code 262.
AS you may notice, im really retarded when it comes to this, but hopefully i will learn sometime.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017
And please: Dont redirect me to some multi thread that is named "How to flash your phone) Cause ive already tried it, but i dont understand **** there
If someone would be kind enough to give me a step by step walkthrough on how i do to upgrade just that ROM that ive downloaded. And what other programs i need to be able to fix my phone.
Thanks in advance!
deleted post
You need to check in the bootloader(tri-colored screen) what your spl is... In order to flash a custom rom it will need to say this SPL-0.72.01OliNex....if it does not say this then you need to hardspl the phone...if you follow the instructions it is easy. Once this is done then you will need this....copy the ROM you have downloaded into the CustomRUU folder and execute the file. If this does not work....you will need to format your memory card(Fat32) and follow these instructions, plus there is a video tutorial regarding all the procedures you need....the instructions are as basic as one can get.
Good luck.
Regards,
WC
Fructis said:
Hello!
In my previous post i asked for the best ROM for the X1, ive already downloaded the image file for a ROM called "EnergyROM_KOVSKY_20090805_Standard".
Now i just want to know how to Apply it to the phone.
What do i need to change in the phone before installing the ROM?
Is it even possible to change ROM in a prototype?
I also have problems updating my ROM (when i tried it before)...RUU gives me error code 262.
AS you may notice, im really retarded when it comes to this, but hopefully i will learn sometime.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017
And please: Dont redirect me to some multi thread that is named "How to flash your phone) Cause ive already tried it, but i dont understand **** there
If someone would be kind enough to give me a step by step walkthrough on how i do to upgrade just that ROM that ive downloaded. And what other programs i need to be able to fix my phone.
Thanks in advance!
Click to expand...
Click to collapse
Thanks for the first good reply...Onfortunatly when i try and update it just say update error 284...
a noob with a professional phone?
know nothing but using a prototype phone.. lols...
devalian said:
a noob with a professional phone?
know nothing but using a prototype phone.. lols...
Click to expand...
Click to collapse
You mean that no person with a general knowledge about flashing rom = busting warranty shouldnt be allowed using a phone?
How do you know anything about what i do with the phone, with what apps im using, and what im using it for?
Mind your own business and come back to the thread when you have something to contribrute.
Fructis said:
Thanks for the first good reply...Onfortunatly when i try and update it just say update error 284...
Click to expand...
Click to collapse
There's a list of error messages here somewhere. Maybe you can find it here. I think the answer is here. It sais just try again after turning off and turning it back on again
btw, being rude to other users isn't going to help you get your questions answered any faster. Updating roms isn't that hard anymore, but you need to be carefull and know what you're doing. If you don't understand how flashing works and what you need to do for that, you can read the stickies in this rom section. I think it's explained very clearly and step by step lots of times.
edit: looking at all your posts, it seems you've asked the same about three times, and most things kan be found easily by google or the xda forum search. Maybe try a bit harder before asking here?
if you don't like criticism, just ignore my post; everybody has to learn to work with windows mobile, but the only way is to try a lot yourself, search, try some more, search again, then ask and try some of the answers given. Don't get agitated when not everyone is giving you the right answer in clear steps, most of the users are trying to explain as good as they can with the information provided.
the guides are pretty thorough...
if you read them its clear enough...
(assuming you want to use non official Sony roms - you need to flash your hardspl so you wont get errors... (think this is where you're stuck)...
download a hardspl and flash it via activesync)
Then
copy the rom into your sd card root directoy...
rename it to kovsimg.nbh
hit the reboot switch while holding down power and the down vol button to start the update process
this is the easiest way...
but as above, if you want shortcuts for everything and dont read the instuctions clear you MAY END UP BRICKING YOUR PHONE...
Gwystyl said:
There's a list of error messages here somewhere. Maybe you can find it here. I think the answer is here. It sais just try again after turning off and turning it back on again
btw, being rude to other users isn't going to help you get your questions answered any faster. Updating roms isn't that hard anymore, but you need to be carefull and know what you're doing. If you don't understand how flashing works and what you need to do for that, you can read the stickies in this rom section. I think it's explained very clearly and step by step lots of times.
edit: looking at all your posts, it seems you've asked the same about three times, and most things kan be found easily by google or the xda forum search. Maybe try a bit harder before asking here?
if you don't like criticism, just ignore my post; everybody has to learn to work with windows mobile, but the only way is to try a lot yourself, search, try some more, search again, then ask and try some of the answers given. Don't get agitated when not everyone is giving you the right answer in clear steps, most of the users are trying to explain as good as they can with the information provided.
Click to expand...
Click to collapse
I'ts a difference in writing a post with no meaning and a post like you just did.
Example: You start a new thread, no matter what it's about. There are two guys responding.
One guy is giving you this as a answer: Lol, thats kinda noobish that you dont know how to use your phone.
The second guy answers just like you did, you gave me information and links on where and what to search for. But still points out that theres many "obvious" stuff that im asking for.
Big difference.
Back to topic. I've already figured out how to do all, i have all the files that i need.
The problem is that when i try and update the SPL to 1.00.X1 instead of thje other 1.02.Olinex (or what its called) I always get a connetion error 262.
Ive read the links that you gave me before, and it says that you need to either softreset, change usb port or reboot your computer. Guys in another thread gives the same instructions.
Still no success.
So since i've done my searching, done the exact procedure that you should do. And it's still not working. Is that still something just "obvious" to ask for?
And i apologize if i hasn't been clear enough in this thread that the phone im using is a proto. And i still haven't been confirmed by some other proto user that this method is acctually working.
I'm thankfull for all the (helpfull) responses i get. And im trying them all.
If something else comes up i will post it in this thread. No matter if its obvious or not.
Have a nice day everyone!
Looks like there's a connection error when your phone reboots to go into tri-color boot menu.
Google for USB Mass storage device, download the driver and install it and then try again.
Of course you have to find the right driver for your OS.
CharlieSImon said:
Looks like there's a connection error when your phone reboots to go into tri-color boot menu.
Google for USB Mass storage device, download the driver and install it and then try again.
Of course you have to find the right driver for your OS.
Click to expand...
Click to collapse
haha, damn, thats obvious, that i didnt think of that before. hehe, thank you!
Btw, if the phone gets into the tricolor menu, and the progressbar shows up (but still stuck at 0%) can it still be because the driver?
Thanks
if its stuck at 0% it means you're not flashing a compatible rom...
obviously you havent flashed the spl...
flash a OFFICIAL sony rom first... if you still have issues at least you know its either the 'prototype' hardware
or your PC...
which i'd suggest try flashing from another PC...
ryousuke said:
if its stuck at 0% it means you're not flashing a compatible rom...
obviously you havent flashed the spl...
flash a OFFICIAL sony rom first... if you still have issues at least you know its either the 'prototype' hardware
or your PC...
which i'd suggest try flashing from another PC...
Click to expand...
Click to collapse
Oh, im sorry if i didnt expressed myself good enough.
When im using X1_HardSPL i get the 284 update error.
When in using the custom RUU i get the 262 error.
So i guess the X1_HardSPL application is to change SPL?
If i cant seem to change SPL i wont be able to change rom either. Correct?
Since i have the SPL that was shipped with the phone, can i still upgrade from R1A to R3A without changing SPL?
Have you disabled any of your firewall and anti virus programs when you try using the software?
I previously always had to disable my zonealarm firewall before I could uset he spl software....
Yes I've done.
yes if you have the stock SPL you can upgrade from R1a to R3a with the standard SE update utility.
which can be downloaded at the SE site under support.
lrammers said:
yes if you have the stock SPL you can upgrade from R1a to R3a with the standard SE update utility.
which can be downloaded at the SE site under support.
Click to expand...
Click to collapse
The Phone is still a Proto.....
Therefor not accepted by SEUS
Try flashing the official Sony Ericsson ROMs first. No need to Hard-spl for those.
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Fructis said:
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Click to expand...
Click to collapse
And if you try to flash via ActiveSync with CustomRUU? That worked most of the times with my X1. Oh wait, that got you the error 262.
In one of your other threads someone says (or you quoted) that one of the advantages of a proto was that there's no security check, which means it might not even be necessary to use HardSPL first.
I've had error 262 a few times; just try to flash again, maybe from another computer if that's possible. You can also try to flash another rom first.
Which roms have you tried flashing? Have you tried with a freshly formatted sd-card smaller than 2 gb (although I think that won't have any effect); you can also try renaming kovsimg.nbh with all small letters, all capitals or the way you just spelled it. It might be important.
offtopic: I get your point on the reactions you get when opening new threads. Everything is simple when you now where to look or if you've done it before, but it can be very hard to find the answer when there's so much info to choose from.
That said: a topic title of something like "having trouble flashig a custom rom to prototype" sounds a bit more serious then "need massive help" with a lot of exclamation marks. That might set people off on the wrong foot.
Related
I've been reading and trying this for days with no luck. I've fully unlocked my wizard and I'm now trying to flash to the 318 rom. But I have no clue how to do it. Could someone walk me through ho to do it? Most of the flashing done thus far has been an EXE file or through DOS. I must be missing something simple.
please help
follow this thread, enjoy
http://forum.xda-developers.com/showthread.php?t=298613
mikaarce said:
follow this thread, enjoy
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
I followed that one already. That's how I unlocked it. But all step 3.8 says is "your ready to flash...". Right now I don't understand exactly how to flash and I'd prefer not to "trial and error" it.
However, this morning I did open up the Hypercore kitchen and I think I'm on the right track. I'm at work so I can't try anything but I've printed up everything in that thread including all it's links and I'm going to give it a go once I get home. I'll report back once that's done.
Alright, after some more research and reading in the hypercore kitchen thread and all it's links, I think I may have it figured out.
I download and extract the files for the ROM I want, in this case 318 8.1 from theloon.
I then follow the instructions linked int he hypercore thread with dumping, and the pkgtool, buildos, etc.. If followed correctly, my wizard should be flashed with the new rom correct?
A confirmation would be nice. Any other comments you have are a bonus.
Another question though; what's the difference between the programs contained in the SYS and OEM folders compared to the ones in the build OS that i have the select? Aren't the ones in the folders already included in the ROM?
Your help would be greatly appreciated. I don't get confused too easily so as you can imagine i'm quite frustrated. I used to flash new versions and programs to my Razr but it was nothing like this.
dont get me wrong are you trying to cook your own rom, because hypercore is a kitchen, i suggest you download one of the roms that are made by reputable cooks, like the NBD series, TNT series, paradox, xmr, faria's, ingenetics, octavio's they differ in the apps and costumization included in the os and the builds, so just select download and flash
there's an executable file inside the roms once you unzip it and be careful if your using xp or vista
The only things I've been working with up until this point is BuildOS and nb2nbf. I haven't fully grasped the definition of "cooking" yet; whether it means altering files for my self or if the BuildOS selection list is considered cooking.
I think i was trying to do too much and using a file different from the one being referenced in the tutorial was a bit confusing. So to start, I decided to use Faria's Crossbow and the tutorial that came with it. It was very easy and I was able to flash my Wizard to that ROM without a problem. But the one i really want is Theloon's 318.
So, based off of what I learned last night I figured I just needed to replace the OEM, ROM, and SYS folders that came up when I unzipped Faria's crossbow with the ones from 318. Is this correct? Because I just tried that this morning and I get all the way to the CMD prompt right before it opens nb2nbf and it gives me an error (see attacment). If there's one thing I've learned from all these bricked devices floating around, it's to NEVER proceed when an error occurs.
What does this error mean? How can I fix it? Is my moving of the folders wrong? What am i missing?
just messin around trying to see what tools work, i got another error.
Ok, now I've got a bigger problem. I finally figured out what I was doing wrong. It's actually a lot simpler than I thought. i was just making it more complicated. Ok, I tarted the flash and at about 47%, it gave me a memory reference error. Now my Wizard won't go past the three-color screen and all it shows is my IPL/SPL 3.08. ActiveSync won't detect it, tried hard resetting, turning on while holding camera button, etc. What do i do now?
Now you start thinking... "Maybe I should have read the stickies on the Upgrading forums... bummer..."
The 3 color screen is called the BootLoader. As long you get that screen, your phone can be recovered. How to recover it?
- Use a Windows XP PC.
- Download Wizard_Love Rom (its somewhere, use google or search the forum, but then again, you wouldn't be having this problems IF you knew how to use the search button!)
- Press and hold CAMERA button and hit the reset, keeping the camera button pressed.
- Connect the Wizard to your pc using the USB cable.
- Start the Wizard_Love RUU utility that comes with it.
- Just press next until it starts flashing the ROM to it.
- Pray for it to finish without touching anything until the RUU says CONGRATULATIONS.
There... your phone is working again.
READ THE STICKIES BEFORE DOING ANYTHING AND USE THE SEARCH!
THIS QUESTION HAS BEEN ANSWERED FOR TOO MANY TIMES ALREADY!!!
PS: Maybe we should create a thread for helping the guys that don't follow stickies or care about the ALREADY info we have here... something like:
- 3 color screen: do this
- different IPL/SPL G3 on a G4 device: you are screwed.
I definately read the stickies over and over again. I've got a stack of printouts sitting in front of me that I've been reading for the past week.
I understand your frustration about questions like this but that's no reason to be rude. I used to be a moderator on pbnation.com so I know exactly how you feel. But the fact of the matter is that I'm not as familiar with these things as you are. I fixed the bootloader issue before I even read your response. i found the answer by re-reading one of my printouts that said the re-flash with official rom. So i did that and it worked. I knew I'd get flamed for posting but since I had already had a thread created, I figured it wouldn't hurt to post updates on my status.
I know how to flash roms now. It's actually quite easy. However, I ran into some issues that I'd like to explain in hopes that you realize I'm not taking advantage of you or not utilizing the tools and stickies.
i was having problems yesterday because of my work computer (I think). When extracting the files from Hypercore, they were not placed where they should have been and the tools wouldn't work properly. An example would be when opening buildOS it would give me the yes or no prompts. An IT friend allowed me to use his non-work laptop to do the exact same thing and I was able to use it without a hitch. The simple tmobile official rom update wouldn't even work on my work computer. So it's not just me.
I knew there was a reason that i couldn't follow it.
Regardless of your approach, I still thank you for your help.
I didn't mean to be rude... sorry about that. Its just that from your post count I thought your were like a newcomer like those that come here all the time, asking the same questions over and over again. Netherless, sorry for "helping" you the way I did.
I will have some tea now to relax care to join?
So Im a long time lurker, new poster. My wing came today and I would like flash OpenTouch 3 to it but Ive got a couple of questions first.
No matter how hard Ive searched, be it google or the wiki I still cannot find a definite answer about Hard-SPL. What is it, exactly? Do I need it to be able to flash OpenTouch 3?
Secondly, upon flashing the new rom, do I need to re enter all my network settings?
Shaihalud9 said:
So Im a long time lurker, new poster. My wing came today and I would like flash OpenTouch 3 to it but Ive got a couple of questions first.
No matter how hard Ive searched, be it google or the wiki I still cannot find a definite answer about Hard-SPL. What is it, exactly? Do I need it to be able to flash OpenTouch 3?
Secondly, upon flashing the new rom, do I need to re enter all my network settings?
Click to expand...
Click to collapse
Read all the links in "All importatn links"
and never say again: I searched - it is NOT true.
there is ALL i repeat ALL you need written down!
I did read through it, including the Hard-SPL link. I only see instructions on how to install it, not why, or what it is.
The only thing I can deduce from that and other threads is its for avoiding bricking your phone, but Im not installing stuff on my 300 dollar phone without a reason why or what it does, or if I even need it.
I know you get lots of questions repeated over and over, but damn, your own wiki's search function doesnt detail what Hard-SPL is, it only references the link on how to install it.
Shaihalud9 said:
I did read through it, including the Hard-SPL link. I only see instructions on how to install it, not why, or what it is.
The only thing I can deduce from that and other threads is its for avoiding bricking your phone, but Im not installing stuff on my 300 dollar phone without a reason why or what it does, or if I even need it.
I know you get lots of questions repeated over and over, but damn, your own wiki's search function doesnt detail what Hard-SPL is, it only references the link on how to install it.
Click to expand...
Click to collapse
First off, welcome to xda...
You need to relax a little, its not that hard and if you do brick the devic you can always reflash the original...
On the original thread for the rom, there is a FAQ section that should help you get started.
If you device is new and you have never flash it before then there is no need to HARD-SPL.
Posted by JLine05 Post:
Post 719
Here's the rom I use:
Open Touch Biggy v3.0 by ttran:
http://www.megaupload.com/?d=7GY2ZNKD
Then follow these steps:
II. How do I flash an NBH file?
a. USPL
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Instructions by Ivanmmj
Also,
In the future, please keep all questions in the original thread, this makes it eaiser for me and others to help you.
Enjoy!
Thank you, and I apologize for the post. Hopefully I'll be back later with your rom on my phone. :-D
I USPL'd. No biggie. What I think it does is writes some code to your device to ignore the security certificates or whatnot. Basically allowing you to install unofficial ROMs. The creator kindly put an image of Tux on there so I at least know it's Linux based.
That's my take on it.
Shaihalud9 said:
I did read through it, including the Hard-SPL link. I only see instructions on how to install it, not why, or what it is.
The only thing I can deduce from that and other threads is its for avoiding bricking your phone, but Im not installing stuff on my 300 dollar phone without a reason why or what it does, or if I even need it.
I know you get lots of questions repeated over and over, but damn, your own wiki's search function doesnt detail what Hard-SPL is, it only references the link on how to install it.
Click to expand...
Click to collapse
Sorry. BUT on IvanMMJ thread about "How to flash" and "Neewbee guide" there is all discribed.
But thanks for ttran... now we have the 101st HOW2!!
hahaha
Remeber, check your SPL to make sure it's higher than 4.0 BEFORE flashing.
Determine SPL?
I have 2 MDAs and can see the IPL and SPL, etc., when I do a Soft Reset. However, with my new Wing I do not get that data displayed on Soft Reset. So, I checked Device Information:
ROM: 4.10.531.3 WWE dated: 03/15/07
Radio: 02.83.90
Protocol: 4.1.13.37
ExtROM: 4.10.531.103
Is there some reason that I do not see the IPL, SPL, etc., on Reset?
I assume that my SPL is what my ROM is, 4.10.531.3.
Thank you.
asctony said:
I have 2 MDAs and can see the IPL and SPL, etc., when I do a Soft Reset. However, with my new Wing I do not get that data displayed on Soft Reset. So, I checked Device Information:
ROM: 4.10.531.3 WWE dated: 03/15/07
Radio: 02.83.90
Protocol: 4.1.13.37
ExtROM: 4.10.531.103
Is there some reason that I do not see the IPL, SPL, etc., on Reset?
I assume that my SPL is what my ROM is, 4.10.531.3.
Thank you.
Click to expand...
Click to collapse
On the Herald, you have to place the phone into bootloader mode to see the SPL. I believe all Wings are 4.0 and above, but you can never be too sure.
ivanmmj said:
On the Herald, you have to place the phone into bootloader mode to see the SPL. I believe all Wings are 4.0 and above, but you can never be too sure.
Click to expand...
Click to collapse
Thanks for your quick response. I do appreciate your time and help. Mostly, all of your posted information.
What is the purpose of the SDDAEMON.INK in the Startup file? I have done searches on this and cannot find a definition of what it does or what it starts up.
well sd would probably the memory card
daemon is a background, "gofer" like file that automatically does computer requests
sometimes abbreviated as "d"..as in syslogd.. for a system log daemon file...blablah
and a .ink file is an image file with recorded information in it... usually used for shortcut icons
but yeah.. i have no idea, sorry
asctony said:
Thanks for your quick response. I do appreciate your time and help. Mostly, all of your posted information.
What is the purpose of the SDDAEMON.INK in the Startup file? I have done searches on this and cannot find a definition of what it does or what it starts up.
Click to expand...
Click to collapse
It's supposed to be a short cut to initialize Cyberon's Voice Speed Dial. The reason you didn't find anything is because it's SDDAEMON.LNK not INK.
mv3 said:
well sd would probably the memory card
daemon is a background, "gofer" like file that automatically does computer requests
sometimes abbreviated as "d"..as in syslogd.. for a system log daemon file...blablah
and a .ink file is an image file with recorded information in it... usually used for shortcut icons
but yeah.. i have no idea, sorry
Click to expand...
Click to collapse
lol. You get 10 points for the answer anyways.
ahh.... sooo sd meant speed dial... hehe
ivanmmj said:
It's supposed to be a short cut to initialize Cyberon's Voice Speed Dial. The reason you didn't find anything is because it's SDDAEMON.LNK not INK.
Click to expand...
Click to collapse
Thank you again. I just did a search on the SDDAEMON.LNK and found the information that you provided me. I really don't like to ask for help until I have searched for a resolution. If I can provide help, I normally try to.
Thank You!
asctony said:
Thank you again. I just did a search on the SDDAEMON.LNK and found the information that you provided me. I really don't like to ask for help until I have searched for a resolution. If I can provide help, I normally try to.
Thank You!
Click to expand...
Click to collapse
No problem. I figured you were trying to search but that I instead of L kills.
DaveShaw Edit:
Split the thread from the NBH Extract thread.
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Shaico said:
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Click to expand...
Click to collapse
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
DaveShaw said:
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
Click to expand...
Click to collapse
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Click to expand...
Click to collapse
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Click to expand...
Click to collapse
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
DaveShaw said:
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
Click to expand...
Click to collapse
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Shaico said:
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Click to expand...
Click to collapse
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
DaveShaw said:
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
Click to expand...
Click to collapse
I'm sorry, it didn't help! Or I didn't understand the mining of the post! so I follow the instructions and then what? Nothing change! It's all the same! I can't see any different! What else can I do? How can I erase all the data include all!! Data!! And start again and make it brand new again? Im just want this logo to go away!! How do I make my Kaiser new again with no foreign files that no came with me device from the factory! I want to Cray!! I can't help it any more! Please help.
Can you please help me live? Can we kindly chat in the messenger? I'm lost of me mind with all this posts and cant mange this alone!
Thank you in advanced!
Anyone can please help?
Hi, sorry for the delay.
The instructions in my last post should get you back up and running. You'll have have to read up on the wiki and the ROM Development stickies for more help.
I am at work now, and am pressed for time at the moment, have a look on #xda-devs chanel on FreeNode after 8-9PM (GMT) for me. I'll be able to chat then. (I am also on MSN, but I don't use it at home that often. I'll try and make an effort over the next few days.)
Ta
Dave
Hi,
Hope someone can help.
Been trying to instal Dutty's wm6.5 R12 rom on my touch hd but whatever I try, it just gets stuck at the screen with the bar and stay at 0%.
I have searched the forum and tried almost everything I could find. SSPL HSPL USPL and all won't work.
Anyone have any ideas for a noob?
i doubt if you can find someone who can guide you step by step, i suggest you study more, i was like you before, but i just persevered, unti i was confident enough to flash my first cooked ROM. CAUSENOT ALL BLACKBONE, have the same default factory settings, different stock ROM versions and different spl.it does require time and patience, but in the end this will al l payback.
jigners said:
i doubt if you can find someone who can guide you step by step, i suggest you study more, i was like you before, but i just persevered, unti i was confident enough to flash my first cooked ROM. CAUSENOT ALL BLACKBONE, have the same default factory settings, different stock ROM versions and different spl.it does require time and patience, but in the end this will al l payback.
Click to expand...
Click to collapse
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
RainerG said:
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
Click to expand...
Click to collapse
look, no one is being a smart ass here. in addition, your description of the the steps you've followed are very vague. my friend, we see 5-10 posts like this every day and in every case, the OP has missed/skipped one or two steps in the flashing process. simply stated, the guides WILL help you flash your device. if as you stated, "SSPL HSPL USPL and all won't work you have to complete this task first. you HAVE to update your SPL before you can flash Dutty's ROM. put your device in bootloader mode and if IT DOES NOT display the following, you will not be able to flash a ROM:
BLAC120 (or BLAC110) 32M
SPL-1.56.01 OliNex
MicroP-BlackStone (LED) v 6
you HAVE to complete this step before you can flash any WM 6.5 ROM. read the guides, make your own easy-to-understand-checklist and follow it to confirm you've completed ALL the steps. be patient and you'll succeed. as a reference, you can use the links in my signature to help you with the process. good luck.
Hi,
I not sure you read the Dummies guide yet.
[TUT] Dummies guide: flashing 1.56+ roms [v 2.0] - [HSPL][USPL]
http://forum.xda-developers.com/showthread.php?t=505377
Troubleshooting - manual SSPL
* Boot up your phone.
* Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
* Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
* When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
* Go to step HSPL3 if successful.
Try to follow this step. Copy the file to phone and boot from there. then u should be able to do so.
Hi guys and girls,
thanks for trying to help. I do understand that people like me who are new to flashing a cooked rom will ask many silly questions. I'll try and formulate better which steps I have done.
I noticed on my bootloader screen that I have spl-1.54.0000. I therefor downloaded the file SSPL-Manual-TouchHD.zip and transfered the exe file to my phone memory. I then started it on my phone. It starts the bootloader screen and tells me:
BLAC100 MFG 32M SS-BC
1.07.0liNex XA
MicroP-Blackstone (LED) v6
From hereon I have tried to run USPL but it tells me it cannot connect due to faulty USB drivers which I have updated with the supplied drivers as indicated. Even with a different cable and a different USB port, USPL will not connect.
I have also tried to run the RUU HSPLWrapper_Blackstone_156OliNex.exe but it then starts the screen with the percentage bar and gets stuck. After a few minutes it comes with either error 260 or 262 wicht is an update failure I have read. Just the fix to start over again and reset your systems didn't do anything for me.
Since I know that poeple are able to use this rom I am defenite that it is by my own shortcommings that I can't seem to do it. But after having tried a lot, I can not see what I am doing wrong anymore.
Hope this is a better explenation and thanks sofar already.
Ps: I have tried both USPL3 and USPL5 from http://forum.xda-developers.com/showpost.php?p=3930878&postcount=3. I just can't seem to connect with USPL.
If you run win7 (and vista) x64 especially, loading unsigned drivers for usb doesnt work by default, this might be your problem.
You could try the following, boot you pc and just after the bios is loaded press F8 (or just keep pressing it multiple times) and a menu will appear which includes: "Disable Driver Signature Enforcement" try this, and after boot you should be able to make the usb drivers work, so reinstall them and try uspl (dont forget to not allow usb connections in windows mobile device center)
Hope this helps, if not, move along
RainerG said:
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
Click to expand...
Click to collapse
I take exception to this. No need to be a smart a**. Obviously jigners was only trying to help, like others before.
If your having difficulty your queries should be directed to the dummies guide thread where people like myself as well as other expereienced users will be more than happy to help you. No need to create a new thread for queries that have been asked umpteen times before.
Thread closed
Hi ladies and gentlemen!
I have tried and tried and tried to flash mi tilt, and no luck. I've followed the intructions(let me guess well if you followed the instructions then you shouldn't be having a problem? save it.) It's not working! :[[[[[[[[ It keeps giving me the error 262 update error. I did what the solution said to do which was to soft reset and enter bootloader, and i did that but still no luck. I 'flashed' wm6.1 i think well installed it from htc's website and it worked and stuff, but i hate it! It is so laggy when i text and it keeps going into sleep mode after 10 seconds or the backlight goes dim after 10 seconds i've tried fixing it with what htc says to do but it still does it after 10 seconds. AND kaisertweak wont work it says the file is corrupt; i've tried re-installing it so many times i threw my phone!!!! ;[ It still works but it has a dent on the side. It doesn't bug me Anyway, someone has to have a solution for all this! PLEASE!!! AND THANK YOU in advance. I also followed the instructions on 'flashing for newbs' and still no luck. If you need info on my phone here it is: WM6.1, (when entering bootloader with the power+camera+SR) 3.56, THE PHONE IS UNLOCKED(as in i can use t-mobile, verizon, etc.), and that's all i can remember lol. Oh yeah one more thing, i can't seem to get rid of the 'bloatware' :'[ I've tried many so-called 'solutions. :'[ no luck. HELP!
This is the second " help me with my phone " thread you have started in the rom development section. You are not developing a rom or aiding a chef in developing a rom. So stop starting new threads here. Your last one was locked, and so will this one. This is not the I'm a noob , help me section. If you are having a problem post it in the flashing for noobs thread. There is no problem that you are having hat hasn't already been addressed in that thread.
Have you flashed hardspl yet ? Which one 3.34, 3.56. 3.29. 3.29 cmonex ? Have you tried flashing from an SD card ? 262 is a usb error. Have you tried reloading activsync ? Have you Disabled anti virus and firewalls. Saying I've tried everything tells people nothing.
denco7 said:
This is the second " help me with my phone " thread you have started in the rom development section. You are not developing a rom or aiding a chef in developing a rom. So stop starting new threads here. Your last one was locked, and so will this one. This is not the I'm a noob , help me section. If you are having a problem post it in the flashing for noobs thread. There is no problem that you are having hat hasn't already been addressed in that thread.
Have you flashed hardspl yet ? Which one 3.34, 3.56. 3.29. 3.29 cmonex ? Have you tried flashing from an SD card ? 262 is a usb error. Have you tried reloading activsync ? Have you Disabled anti virus and firewalls. Saying I've tried everything tells people nothing.
Click to expand...
Click to collapse
I FIGURED SINCE THIS IS BEING POSTED IN THE "ROM" SECTION I WOULD GET HELP!!!! OKAY!!!! JEEEZ-IZ!!!!!!!!!! Yes, i've tried and it doesn't work. i have no anti-virus things on this pc. i've tried sd card too. 3.56 idk. If i'm going to get attitude for posting in the wrong section then no thanks i don't need this XXXX from you or anyone else. XXXX
Mod Edit: Edited swear as no need for that and against forum rules
Moved as not ROM Development and in previous you was given some ideas, have you tried another computer? Tried hard-resetting phone? Tried another stock from provider or even better:
Posted in here:
Flashing Your First Kaiser Rom (For Noobs)
Maybe a better place to get help
Please post in correct sections no matter how you think you may get more responses.
Have you tried indenting paragraphs or cutting up your post so that it can be read?
Is it just me, I can't read that stuff?
So, if his phone is unlocked, is it possilbe his phone is already set to flash? I guess it depeneds on how it's unlocked.
I FIGURED SINCE THIS IS BEING POSTED IN THE "ROM" SECTION I WOULD GET HELP!!!! OKAY!!!! JEEEZ-IZ!!!!!!!!!! Yes, i've tried and it doesn't work. i have no anti-virus things on this pc. i've tried sd card too. 3.56 idk. If i'm going to get attitude for posting in the wrong section then no thanks i don't need this XXXX from you or anyone else. XXXX
Click to expand...
Click to collapse
You figured wrong, twice apparently, so Mr. Denco was showing you your failures in figuring. You got the "attitude" for posting in the wrong section TWICE.. When a mod closes or moves the thread, they explain why..