Database Develop

Upgrade stop at 99%

hi everybody,
When I'm trying to upgrade my wizard, the process always stop at 99%.
I have try with several rom and it's always the same kind of problem. These just one Rom that is working the Wizard_Love_2.26.10.2.
Do someone have any clue of how to upgrade my phone with a wm6 rom?
Thank's a lot

How long have you waited? I've seen it sometimes take 10 minutes or something until it finished..

The windows sofware send me an error and then the update stop..

Your phone is locked. I had the same error, also need to lower your Rom.

I already have flashed my rom to a lowest one for instance "WM5SE rev 4.0 - WM5 without stylus but style" (this one work without any kind of problem). Then I have tryed to update with a WM6 one and it stop at 99% or I have the message "Invalid upgrade toll".
Do someone have had the same kind of pbl and solved it?
thank's a million

i had the same problem a few days ago and all i did was downgrade it to buttons rom and then upgrade it to the tomobile2.26 and everything installed correctly.

Please help, I think I bricked my PPC! :(((

I tried flashing WM6 on my QTEK 2020, but I had the wrong version. I begun the upgrade having it on bootloader and after a while an error about updating radio occured. Now, my PPC powers up, but it gets stuck on the beginning with the "QTEK" logo with the clouds and the blue led that indicates the bluetooth is activated. Neither soft nor hard reset does anything and I can't flash the original rom through bootloader (I can boot the PPC in bootloader).
Does anyone have any idea please?

If you posted this in the Qtek2020 (Himalaya) forum, you might get a quicker response.

Thread moved out of the BA section

Maybe you should try reflashing. Just flashing a new ROM and then just a radio might do the trick.
How did you flash? With the No_ID?
And what were you trying to flash? A BA ROM while you have a HIMA?

OK!
It's ok now! I flashed the WM6 Rom having my PPC on bootloader and everything's fine!

Its very good to hear that..btw which rom did u flash before and what have u flashed now

I really can't remember what the previous rom was, but it was for another brand! It was stupid to flash that one! The one I have now is this:
http://forum.xda-developers.com/showthread.php?t=332945
But I have a problem. The PPC restarts randomly even if I do nothing with it. I haven't overclocked it.

It is not got sign, if your PPC restarts randomly. Better you flash it again.

I flashed again the ROM from "Himalaya Mobile 6" category and the following link:
http://forum.xda-developers.com/showthread.php?t=332945
but my PPC keep restarting and one more thing, WM6 kills my battery! I've got to charge it every day, before I charged it every 3-4 days. Does anyone have any idea what I should do? Can I put WM2003 now?

Hmmm... I'm using the 7c ROM from that page with no problems at all.
Did have some issues with some older apps and the config for TomTom when I switched to WM6, but not anymore.
What do you have installed, and what versions?

I have installed nothing but WM6!

another failure at 80%

just attempted to upgrade mda compact 2 using :-
RUU_Charmer_38221_382116_026921_TMO_UK_WWE_Ship.exe
from the t-mobile website , it loses communication at 80% and attempts a recovery this then fails this happens every time , any suggestions before it goes in the bin?

Try any other WM5 ROM for charmer. Or use the NoID RUU. It will flash it. Search for it in the Charmer forum.

Try this: http://forum.xda-developers.com/showthread.php?t=471490

In this package there is a NoID. so thanks rmagyar for pointing to it.

thanks for the comments but still a brick
thaks have tried the noid version which is suppose to help on hanged upgrades that didnt work I, have noticed on an old thread others hanging at 95% have used a radio version which I have also tried that didnt work, I have noticed that others have re-installed v2.6 and its been fine my problem is foolishly I did not bother with the backup , has any one got 2.6 or any other suggestions ...Thanks

There is one possible way. But nobody can say how it works. You have to do a upgrade with a SD-card. This is the ultimate solution. But I can't tell you how it works on Charmer I yust know it for the Wallaby. But you can just look in the Prophet forum maybe somebody there knows how it works.

Help! Problems flashing X1

Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...

Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?

Shameless bump for help.

very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.

Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.

hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.

I want to have the hardspl on there so I can flash custom roms.

If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?

U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.

Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!

k, i will msg u tomorrow around 2pm.

Cheers.
In the meantime. Does anyone have any other suggestions I could try?

Bump, for some help.

now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.

Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)

Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.

vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?

Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!

no problem mate hf with your x1

hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.

Flashing to new rom

I'm sorry for this post, because the answer is probelly somewhere on this forum. But I can't find it.
I have my diamond for about a year now and I like to install a custom rom with windows mobile 6.5. But I can't seem to figure out what I need for this.
I already chosen a rom, but I have no idea if it is any good, because there are so many roms out.
http://forum.xda-developers.com/showthread.php?t=563245
So my first question, is this rom any good?
Second question, what type of hard SPL do I need, Do I need the normal one that requires roms to be signed or do I need the developers edition?
Third question. Do I need MTTY for this or can I first try it without MTTY?
And the last question, if I don´t like the rom is it easy to install the original rom again or do I need to do something special for that.
I hope you guys can answer my questions so I can start flashing my rom.
Grtz, Eric
EDIT: I tried installing hard-SPL unsigned, but get an error that it can't connected to my phone. But it is connected using windows mobile device center

why do you want to flash a new rom?

ive recenetly done the same, i wanted to flash my rom as the original was tied to vodafone and some of the features like youtube, facebook, and opera wouldnt work as they wanted vodafone connection ( im on virgin mobile).
anyway after much trial and error i in the end found it versy easy.
3 simple steps. first flash your bootloader
i found the best and easiest one was spl olinex version 4.0
u need to softboot to do this ( hold the down volume and switch on phone, have usb cable connected then use the flash util provided with the above.
once thats done you need to flash rom the radio
again the one out there that seems the best to use is version 1.00.25.05 diamondruu radio
again soft reset so you get the try colour screen and run the flash rom update ( takes about 2 mins at most)
finally choose your version of win mobile 6.5 ( i got windows revoluton 7.1 ultra clean edition)
do soft reset again, then run the flash update and again this takes about 5-10 mins for this)
all worked perfectly for me and it was my first try.
though i will be changing it as the revolution is missing some vital aspects i like.
i know its basic but hopeully you can see its not the daunting prospect some people make out though any rom upgrade carries a minot risk i found this to be as easy as 1,2,3
good luck

cloudedhopes said:
why do you want to flash a new rom?
Click to expand...
Click to collapse
Because I would like some new features on my phone. Like wm 6.5 or a new version of manilla. It's getting a little boring having the same phone for over a year.
@miramele, thanks for your response. I'll give it a try tomorrow and hope I won't brick my phone.

let us know how you get on, it took me several attempts as each time i was trying while within the phone itself, if you hold the down volume key and power on the phone you get the tri colour screen, in this mode i had 100% success each time.
doing it within the OS with phone on it just stuck at 0%.
And since then i have re flashed it with a diff version of wm 6.5 that i prefer and all is good.
the version i flashed to is the manila 2.1 with the latest touchFLO 3d so ive not even bothered with Spb mobile shell though may add this later.

miramele said:
let us know how you get on, it took me several attempts as each time i was trying while within the phone itself, if you hold the down volume key and power on the phone you get the tri colour screen, in this mode i had 100% success each time.
doing it within the OS with phone on it just stuck at 0%.
And since then i have re flashed it with a diff version of wm 6.5 that i prefer and all is good.
the version i flashed to is the manila 2.1 with the latest touchFLO 3d so ive not even bothered with Spb mobile shell though may add this later.
Click to expand...
Click to collapse
Thanks for the advice, if I understand correctly I have to get to the tri-color screen and then install hard-spl? But can I connect to my laptop while in this mode?
I'm gone try it tomorrow because I didn't have any time today.

Thanks for all the help, especially miramele.
I made the step and am now running a custom rom without any issues. Many thanks for the help and for pulling me over the line.