Related
Hello,
I was today handed a fried XDA 2.
My boss had attemted to flash it and it failed for whatever reason.
Now i will say from the outset that i have only ever flashed my XDA1 with a XDA-Developers ROM and it was a breeze.
The ROM file HE flashed with was called.
Xda_II_Upgrade_v16050.exe
Now when you switch the thing on.. all you get is a a small amount of txt saying
'Serial'
'v1.06'
and nothing else..
What have i done? Well i have sifted through the articles on here.. and found this rom
XDA-developers-SER-v12.exe
I have installed this on an SD card using xdatools.. WHOLESALE.. i.e. no moding of the files...
I have looked at 'http://wiki.xda-developers.com/wiki/HimalayaRomFlashing'
but as i can boot into the device.. i cant get the info it requires.
I am open to any and all help. And I'll even buy you a pint!
I am really at a lose.
Thanks in advance Guys and Girls.
It may not be as bad as you think.
It is in bootloader mode - currently in Serial mode and if you put it in a cradle connected to a PC (with ActiveSync installed) the bootloader should change to USB v 1.06. From this point you should be able to load a normal ROM from the manufacturer.
I have an i-mate, so am not sure what the current ROM version for the XDA II is, but I'm sure others will chime in with this information.
I upgraded to this version, not knowing I already had this loaded. You need to check the extROM version before upgrading as this appears to be way the official upgrades seem to change.
I had no problems and it was done through the Active Sync process
The file can be found here if you haven't already got it... http://www.my-xda.com/downloads.html
Try it again. It does take about 90 mins.
Regards
Nope... Nadda... Zip... Zilch.
Roit...
When i dock the pesky thing in the USB craddle.. it does display USB and v.1.06.
Activesync shows NO sign of knowing the XDA is there.
The ROM found at http://www.my-xda.com/downloads.html as suggested by flintanis fails with a ERROR 100: MODEL ID ERROR.
BRosenow what do you mean by 'load a normal ROM form the manufacturer' is that not what i have just tried?
Once again a pint for all contributors.. and my first born to the dude with the solution.
Cheers.
ActriveSync won't activate because it's in Boot loader mode but you can download the latest ROM Update from the manufacturer or cellphone service provider and load that to flash the ROM and complete the process.
If it's a UK XDAII, get the update at www.my-xda.com .
It appears the previous user tried to flash it with a ROM from another manufacturer (Q-Tek/MDA II/i-mate). You are now receiving a Model/Country ID error. I have not experienced this myself, but I have read posts in this forum on how to fix it. Do a search and I bet you will find it.
- OR - any user who has experienced this and successfully flashed his ROM could chime in here and give jonathh some advice . . .
After much ado about nothing..
i have returned to again fix this XDA2 (the joys of pesky FT employment; make your minds up guys.. you want this XDA2 fixed or not?)
Right i *think* with quite a high level of certainty that the XDA2 currently in my grubby mitts was purchased in Malaysia/Sinapore.
Now.. am i correct in that flashing it Xda_II_Upgrade_v16050.exe from http://www.my-xda.com/downloads.html
Would cuase the problem i have now.. or at the very least wont go on on the XDA2 now because it is a UK ROM and a Malaysia XDA2?
I have flicked thru the pages on here.. and i cant seen to see how to solve this!!
PPllleeasseee help
*sobs, and gently rocks back and fourth*
I think there is a bit of confusion going on in this post!
The first ROM you tried (XDA-developers-SER-v12.exe) is for XDA1 - NOT XDA2.
The best place to get the latest UK XDA2 ROM is http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIRom.htm
and i *believe* that the place to download the Malaysia ROM is
http://www.myxda.com/XdaII/serviceandsupport/template/XdaIISoftwareUpgrade.vm (note the absence of the '-' between my and xda...this is the Asian O2 website)
See if the ROM from either of those sites will install
Hope that helps!
How about scrambled?
Ok, thanks 'pope'
*none* of the roms suggest work..
Xda_II_Upgrade_v16050.exe reports unknown country code..
and the recently suggested
Xda_II_LaunchROM_v10311.exe just sticks on the 'checking for information' left it for over an hour! BUT doesn't report unknown country code like the other one.
I cant get the XDA2 rom from the Asia site, as after i registerd my XDA2 it reports i dont need the damn update... anyone got it already?
I have extracted the core files from both these exe's and tried to copy them to an SD card(the NBF fille) using XDAtools.. and xdatools report the files are invalid.
I am lost and clueless!
HHHEEELLLPPPPP
Well that didn't work...
I got my grimmy grits on another XDA2 and using XDAtools sucked the ROM off of that.. and then.. again using XDAtools squirtted it out onto an SD card..
But i am unsure what i have to do then? is this latest approach possible??
Comments welcome![/code]
Love to help… but
My UK O2 XDA II has exactly the same problem. I died whilst flashing the UK O2 1.60 ROM, and now I can't do anything with it. Identical symptoms. Identical complete lack of success (eight hours and counting).
How can I find out the country ID of my device when my XDAII is dead?
mark8barnes said:
Love to help… but
My UK O2 XDA II has exactly the same problem. I died whilst flashing the UK O2 1.60 ROM, and now I can't do anything with it. Identical symptoms. Identical complete lack of success (eight hours and counting).
How can I find out the country ID of my device when my XDAII is dead?
Click to expand...
Click to collapse
O2 will fix this for you if it happened as a result of flashing with their rom.
By they way, in case anyone was concerned when I said " I died whilst flashing the UK ROM", I did of course mean "it died..." ;-)
But I have solved my own problem! How come you can spend hours trying to find a solution, and as soon as you ask for help, you sort it out straight away??!!
I hope this works for you if you're still struggling.
1) Download the latest i_Mate ROM from http://www.clubimate.com/Support/RUU172126WWE_imate.exe
2) Download the XDAII Rom Editor from http://wiki.xda-developers.com/uploads/ER2003Edit_1_2_20.msi
3) Extract the files from the IMate ROM, and use the ROM Editor to change the Operator to 02. Get the instructions here and the password here
4) Flash the ROM as normal. It worked for me You could experiment with using the O2 extended ROM files rather than the T-Mobile ones, but I was just glad to get the thing working. Perhaps I'll feel braver later.
I did feel braver, and copied the O2 Cabs into the IMate Extended ROM file. Then I deleted the IMate cabs I didn't want, modified config.txt and prayed! Everything seems to have gone fine, and I'm now re-installing all the software. Already there seems to be a significant speed increase over 1.60.
I'd recommend taking this step before you flash the ROM, rather than doing it twice like I did.
mark8barnes is the man!
I didn't do the mods.. just as per your original post.. and it worked!! Yay
Thanks mate you da man!
Now i do have a query tho.. if i did suck the rom off using XDATools.. how would i get it bck on again?
Cheers all you guys..
Fried XDA
Hello Mark
Me too, I flashed my ROM with the UK version with the same result.
The link to the iMate ROM no longer exists, can you help me please. I'm a real novice at this.
Thank you
Ben (Aust)
mark8barnes said:
By they way, in case anyone was concerned when I said " I died whilst flashing the UK ROM", I did of course mean "it died..." ;-)
But I have solved my own problem! How come you can spend hours trying to find a solution, and as soon as you ask for help, you sort it out straight away??!!
I hope this works for you if you're still struggling.
1) Download the latest i_Mate ROM from http://www.clubimate.com/Support/RUU172126WWE_imate.exe
2) Download the XDAII Rom Editor from http://wiki.xda-developers.com/uploads/ER2003Edit_1_2_20.msi
3) Extract the files from the IMate ROM, and use the ROM Editor to change the Operator to 02. Get the instructions here and the password here
4) Flash the ROM as normal. It worked for me You could experiment with using the O2 extended ROM files rather than the T-Mobile ones, but I was just glad to get the thing working. Perhaps I'll feel braver later.
Click to expand...
Click to collapse
Dear friendly XDA-Developer,
Three days back, I tried to upgrade my ASIA IIs radio from 1.02 to 1.12. It all went smoothly, but however, my IIs had been without signal and all it says is No Service. I've tried to search through the forums, but to no avail. Kindly please help... I'm at my wits end.
Thank you all!!!
Not sure were or what files you used, if they were type I or II, so I would just sugesst that you Reflash using the files of wiki.
Hi, thanks! I practically tried all the other radio roms for BA thats available on the ftp://xda-developers, but all give same results... Is it something to do with the radio rom or my phone?
You can't try all roms of the download site for they wont work unless you know what you are doing, (correct rom type ect).
Just make your life easy and go over wiki, download, read and install, its worked for many before you.
Read below this
Dear MDAIIIUser,
Like what you've said, I've read through the wiki BA guide, over and over again. I've followed throught the tutorial carefully and still, it didn't solve my problem.
I've some queries here:-
Firstly, if I use an incompatible radio version, would it affect my XDA IIs? I mean, I've successfully upgraded my CE Rom to 1.40 WWE previously and it worked flawless with cooked 1.40 Ext Rom, however, the moment I upgraded my radio rom, my phone feature cannot be utilised. It just says No Service. I've seen on the forum Asian users using Qtec 1.08 radio rom.
Secondly, my understanding on the Oper and WWE is that by setting them correctly with XDA3tools, I can then upgrade them to my XDA without facing any country code errors or such. But would it affect my XDA functionality?
Lastly, can you make any recommendations on which is the most appropriate CE/Radio ROM version I should use for my XDA IIs based on WWE & O2ASI001?
THanks a millions! Believe me, I've really tried very hard to get my IIs to work and have throughly read through the guide, but to no avail...
I recommend that you just download a FULL, fresh, 1.40 Shipped EXE (I recommend the I-Mate one) and upgrade with it.
Use the first method described here to upgrade.
Dear TheLastOne,
I'll try that now! I'll post the results after that.
Thanks a millions!
I've successfully flashed my XDA IIs with I-Mate shipped exe. All went smoothly, but the same problem persist. No service. I guess I can pronounce my IIs official dead... Sob Sob
khngaroo
Could it be that your device is sim locked or that your sim card is no good?
Dear MDAIIIUser,
I believe that my SIM is not locked as I can make calls using the same SIM with another phone. When I insert my SIM card into my XDA, there wasn't any prompt or indication of my device being locked... Is there another way to verify that?
Thanks!
khngaroo said:
I've successfully flashed my XDA IIs with I-Mate shipped exe. All went smoothly, but the same problem persist. No service. I guess I can pronounce my IIs official dead... Sob Sob
Click to expand...
Click to collapse
Hi KHNGAROO... I am not an expers as TLO and MDAUser..but you can give a try downloading the 1.10 radio and downgrading your 1.40 istallation thet contains 1.12 radio to 1.10... I experienced a lot of problems on my device ( low signal or no signal) with the 1.40+1.12 radio combination..and I solved with hios trick..Dont know if can work for you..but maybe you can try..byez
khngaroo
The fact that you have no service would or could indercate that it is beining rejected by your network operator.
Alas, I have no Idea what message you get when a BA is locked to a sim.
(as in the provider has SIM locked your device so that you can only use it with that sim on his network).
The fact that you can use your sim in a different phone proves that the sim is not faulty however that does not verify if the Phone is sim locked.
Thus can you insert a sim from another device that you know that works into your BA and use it.
I have no idea what you had on the phone before you upgraded it nor if it worked, nor if you have also changed your sim so its just a bit hard to work out your probem.
At the moment it could be a locked device or a faulty instaltion of the radio rom.
You might have to go back to your Shipped version to verify if the device still works.
Then upgrade the OS only and check again
Then cook the Extromn to make sure you are not downgrading anything with the new 1.40 OS
Then upgrade the radio to a higher version 1.10 to verify if it works
The upgrade to 1.12 to prove or disprove vicer's very good suggestion.
Have fun
Be careful with the files that you use as you can't use Type I upgrade files to upgrade a Type II rom. Thus you will need to always download the files based on wiki and not reuse the old ones.
Dear MDAIIIUser,
I've flashed my original shipped asian rom back to my device. Got the SD bootable from my pal holding the same phone. Didn't work, still says No Service. I guess either my device is locked or the hardware is screwed.
Is there anything I can do to unlock my SIM on my XDA, should it be my XDA being locked. Or do I really have to bring it down to the service center to get the whole thing fixed?
Thanks a millions for all your help... Appreciated...
You still have not asnswerd the question of the sim. So I still dont know if it is the original sim or if you are using another on on a locked device.
So based on what I do know:
If you flashed the original Rom and have the correct sim and it does not work then your device needs to be sent back to the shop (which will be no problem as you have the original rom in it).
Wiki has a how to unlock (but like I said I dont know if that is your problem)
To all whom had helped me along the way (esp. MDAIIIUser & TheLastOne & vicer)
Brought my XDA IIs to Accord Dist and got it fixed. Now its back. I was told by the customer service operator that they had replaced the whole mainboard altogether. They didn't tell me what was the exact problem. Guess it was the hardware all along. But I was wondering, how on earth can flashing a ROM cause so much damage?
Therefore, here is a warning to those who wish to flash their XDAs, please do so only f you know what exactly you are doing. Please read wiki carefully before you try anything, or you might end up just like me, hee...
Well glad you solved your problem. There are a lot and I mean a lot of people that have been able to falsh thier device via this forum. But as you said you need to read and understand what you are doing.
So what rom do you have now and are you going to keep it?
(Not sure based on your sig)
Dear MDAIIIUser,
Weel, I've upgraded my CE rom to 1.40. However, I've decided to maintain my radio rom as it is (1.02), its kinda like once bitten twice shy. Quite sceptical that my IIs might end up in heaps again, lol.
Thanks again for all your help and concern.
khngaroo, I'm glad all your problems have been fixed. If it is indeed a hardware problem, then you should not hesitate to upgrade your rom.
(Besides, if the problem returns, you know they'll fix it )
TheLastOne said:
khngaroo, I'm glad all your problems have been fixed. If it is indeed a hardware problem, then you should not hesitate to upgrade your rom.
(Besides, if the problem returns, you know they'll fix it )
Click to expand...
Click to collapse
Dear TheLastOne,
I took your word for it and gave it another shot! Followed all the instructions found at WIKI and presto, it worked and now my IIs is running on 1.40 CE and 1.12 Radio.
Many, many, thanks to all of you who had helped along the way!
khngaroo
Great, Happy for you.
The 1.40 rom has a few issues that can be found on the wiki Upgrade page that you need to be aware of.
Hi guys,.. i have been trying to upgrade my P3600 over 2-3 weeks now but i reach the same problem always, and that is simply.... I have managed the RADIO Rom to 1.41.00.111, but when i try to update the operating system.. with... Lvsw 2.0.1.1 / Mary 2.0 / PDAVIET 3.00.07.09 ... everything goes far with the updating.. i can see the progress bar, it reaches 100%, the screen on my mobile goes black... and it says on my computer to follow the info on my mobile and close the update application.
Now at this time my mobile is totally black (shut off i guess)... i have waited for more than 5 minutes but since nothing happens, i have restarted the mobile with a soft rest... but after the rest i still have my OLD operating system....
What am i doing wrong?.... I have read through bunch of threads on the forum, but haven't seen anyone else whom have had this problem.. or is it simply that i should wait even longer time and the mobile should start up by itself?....
Appreciate any help & suggestion...
can anyone help me?...
I've tried to update my HTC3600, by using the "WM6 Official - Any Device" from http://trinityguide.info, and it just doesn't work... I have updated Hard-SPL, and then tried to apply "Official Dopod ROM" ... the only thing it did was to revert my Radio-ROM back to 1.46.xxx (from 1.50.xxx i had before)...
But the OS was never updated to WM6... I have tried a bunch of different WM6 ROMs now during the weekend, nothing has helped... even tried some application to unlock CID (what is it actually ???).
The only thing I've managed is to update my own OS using the official swedish ROM (I've bought my HTC in sweden). And i've been able to update my Radio ROM to 1.46.xxx, 1.50.xxx.. as well as installing different HARD-SPL.
But i've so far not been able to install ANY WM6, or WM5 cooked ROM's .. so pleaaaaaaase help my guides... I'm starting to go nuts over this...
Appreciate any advise & help.. thanks in advance !
Hi, I have been reading this forum for some weeks and I am thinking of unlocking my Touch 3G by using this Hard-SPL thing which is available here.
However I am still hesitating because I have never done such an "intervention" in the past, so please allow me to ask you if you did it and if yes if it worked without problems (from the thread I wasn't able to understand if more that 2-3 people have really succedded!)
Thanks, lila
I actually tried few times yesterday and today, but I am getting "Server is down" message .
i manage to solve it. how? i have exit my antivirus, then, go to control panel/windows firewall and put it on off, and will work. each time, i have install enablerapi.cab on device memory.
I disabled firewalls and antivirus software. I tried on three different computers with different (working) access to internet. Still no joy . I guess I will try later.
I've unlocked my Jade without any problem, but to be honest i didn't flash another ROM yet because i want to be sure i can go back to original one (just in case of waranty), and i don't know how to rebuild my dumped original ROM.
I'm still trying to figure this out, gonna succeed as long as i keep reading this excellent forum.
Anyhow, flashing a new ROM isn't that difficult, but you have to follow the guidelines very well and keep on your reading glasses..)
Hi. I am very happy Thank you OLINEX. I have HTC 3G (Jade 100) I make HARD SPL and I install http://rapidshare.com/files/15981107...30.09_Ship.exe
rom. It is very good rom and stable. Now I have english language and my phone rings best. Thank you OLINEX.
fenikso said:
I disabled firewalls and antivirus software. I tried on three different computers with different (working) access to internet. Still no joy . I guess I will try later.
Click to expand...
Click to collapse
So, I finally got it to work. I will post my "story" to Hard-SPL thread .
i did it with the first attempt with v3, no problem and i'm really happy
Hard-SPL
With hard-spl you will not unlock your jade . It´s only necesary to upload others roms to device.
estancolaplaza said:
With hard-spl you will not unlock your jade . It´s only necesary to upload others roms to device.
Click to expand...
Click to collapse
Oh yes you are right, however that's what I meant; in fact I have a Jade with French ROM and I want to change it to English.
for me dont work the hard spl....
I've been trying for the past 3 days to Hard SPL my jade without any luck. always the phone restart without entering to tri color mode.
I even tried to exit the antivrus and disable the firewall but always same error.
Any suggestions here please?
fenikso said:
So, I finally got it to work. I will post my "story" to Hard-SPL thread .
Click to expand...
Click to collapse
Ca you post your story please maybe you can give us a little help.
Thank you
no luck with the one i tried, just restarts. dont know why this phone is so special, every other one ive done is so easy.
stock loader version is 1.40.707.2 tried using windows xp sp3 .net3.5, tried using hardspl v2 and v3 (tried v2 just in case that worked)
the link is dead!!
lots of problem, the HardSPL from Oli doesnt work, but the radio update from HTC works
keep trying and win
SPL does work. But you must keep trying. I got "server down"
and so on. After a week and hundred times try, I got unlocked the phone.
Now I can enjoy any wm6.5 roms. It is free software and not perfect.
But It does the job . well done Olipro and Cmonex.
Which phone do I have ?
My phone is supposed to be a Touch 3G but the processor is a Marvell PXA310 @ 624 MHZ.
The phone says it's a T3238, can someone tell me which phone I have please?
It's a clone I think.
When I boot holding the volume key I get a white screen saying USB update model
Hi,
I have a TOUCH 3G and I did the HARD-SPL. The better thing in here is that developers and always available to help you. For example, i had some problems doing hard-spl to my Jade but with the help of cmonex(developer) i've done it without any problems. You have a lot of support in here. SO, If I were you, I would do it.
it works like a charm
hi
Yes i did my HSPL today and it worked like a charm it was so easy and
i had a gene(P3400i) and the HSPL for this phone was so difficult
compare to the HSPL for Jade
the Jade HSPL took only around 10-15 mins
now i need to flash some cooked rom will do it today right now downloading ironegles ROM
Note : u need to off ur Firewall or it wont work OK
Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...
Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?
Shameless bump for help.
very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.
Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.
hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.
I want to have the hardspl on there so I can flash custom roms.
If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?
U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.
Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!
k, i will msg u tomorrow around 2pm.
Cheers.
In the meantime. Does anyone have any other suggestions I could try?
Bump, for some help.
now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.
Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?
Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!
no problem mate hf with your x1
hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.