Related
Hello,
I bought the Herald because I wanted to use VOIP on it eventually.
But then it doesn't seem to work quite as expected. The main problem is that the sound doesn't come from the earpiece but from the speakerphone instead...
Has this problem been solved???
Thanks in advance!
/Stig
tested , it is not working on T-mobile Wing, it keeps saying "searching", I may have to change ROM to use Microsoft VOIP.
the SJphone works fine on Wing
cgigate said:
tested , it is not working on T-mobile Wing, it keeps saying "searching", I may have to change ROM to use Microsoft VOIP.
the SJphone works fine on Wing
Click to expand...
Click to collapse
I had made an earlier POST about using VOIP on wing. Will appreciate your help to setup VOIP on Wing. I downloaded and installed WM6VOIP and Setupvoip from the forum - but did not understand how to get the device to dial out. Do you need to use the phone dialer or do you need to use another softphone software.
Will appreciate your thoughts...
Nick
zerodiscount said:
I had made an earlier POST about using VOIP on wing. Will appreciate your help to setup VOIP on Wing. I downloaded and installed WM6VOIP and Setupvoip from the forum - but did not understand how to get the device to dial out. Do you need to use the phone dialer or do you need to use another softphone software.
Will appreciate your thoughts...
Nick
Click to expand...
Click to collapse
anyone bother to read around a bit...
it uses the same dialer for GSM and for VoIP calls.
anyway - fring is the best solution
Hi everybody, I try to find other thread with something like this, but I can't find anything.
well, I used the schap's wm6.0 rom and I didn't have problems with skype.
due to many reasons, now I use htc rom 3.28.405.0 (Radio 1.65.16.25) original HTC WWE (World Wide English)
I tried with 2 versións of skype, "for windows mobile" and "for smartphones". both crash when I open them
someone knows, how can I use skype on my kaiser?
thanks.
PS: excuse my bad english.
Skype does not work on wm6.1 There are many, many, many treads on this.. Goto skype.com and check for new release, there are no solutions pr.date.
Rollback to wm6.0 or use some of the altenatives, fring, iskoot and so on.
thank you very much
by the way, some recomended radio? I'm not sure, but this radio get empty very fast my battery
Try the niki.. depends. Play whit them.
http://forum.xda-developers.com/showthread.php?t=393182
Skype will work on Kaiser if...
U D/L the PPC version. Kaiser is actually a PPC with phone capabilities.
Skype DOES Work for WM6.1 It just depends on what ROM you have installed. I Have Skype working on my phone and I'm running WM6.1
My skype works with standard WM5 on my Tilt but it hangs up after about 3-5 minutes consistently. Voice quality improves with WIFI over 3g but it still hangs up... any ideas?
Hi,
I think it can be a solution for everyone who wants to use M$ VoIP and GPS in his Diamond (till today if you use VoIP, GPS goes dead).
IMHO problem was one file called dnsapi.dll in VoIP cab which overwrite original one in ROM. It caused that GPS goes dead.
I've removed this file from my OEM package and cooked a ROM with VoIP. I tested this and VoIP and GPS is working without any problems.
I using only OEM packages - if someone can make a cab file from attached OEM package and test it, maybe we will have a solution for everyone !
[2008-08-08] UPDATE - CABs can be found here - http://forum.xda-developers.com/showpost.php?p=2497988&postcount=8
Sound great!!
This is what i´ve been waiting for... fring does the trick... but BAD.
Sweet.
Good idea, a shame I don't know how to make a .cab.
None of the VoIP programs I tested work on the diamond (even Fring doesn't work properly...)
d3us said:
Good idea, a shame I don't know how to make a .cab.
None of the VoIP programs I tested work on the diamond (even Fring doesn't work properly...)
Click to expand...
Click to collapse
Fring and Skype 6.1 works fine on my Diamond and the GPS too.
halloj said:
Fring and Skype 6.1 works fine on my Diamond and the GPS too.
Click to expand...
Click to collapse
I'm not talking about Skype and Fring - issue was with VoIP drivers from M$. With that you can dial via e.g. Halonet from normal dialpad.
Anyone tried to make proper CAB? For chefs attached OEM package is ready to cook.
Hi,
I tried to make a proper cab, but apparently I failed
I damaged my original dnsapi.dll, now I have one with filedate
31.01.07; could someone upload the original one from a 1.37 rom?
Thanks,
Seven
mcseven said:
Hi,
I tried to make a proper cab, but apparently I failed
I damaged my original dnsapi.dll, now I have one with filedate
31.01.07; could someone upload the original one from a 1.37 rom?
Thanks,
Seven
Click to expand...
Click to collapse
Here you are...
Aaaah, thanks Saves me from Hardreset because the VOIP drivers wouldn't uninstall anymore... Have something in return: Here you have two CABs which do not install a dnsapi.dll, and tested them on my diamond. Works perfectly. You even dont have to reset the phone...
If feedback is positive, maybe the OP could change topic into "[solved]..."?
One tiny thing left to do: Change the ipdialplan.xml to make VOIP dial those "+1 (999) 1212 - 1212" numbers as well ^^
Thanks and enjoy,
Seven
what gps program are you using ?
iliescu902 said:
what gps program are you using ?
Click to expand...
Click to collapse
I've tested in HTC GPS Tool and Automapa (Polish navigation).
Anyone tried CAB prepared by mcseven?
I used tomtom 7, outdoor gps and mobile terminal emulator to see nmea records on COM4 directly. all 3 programs were running simultaneously and were receiving GPS.
I also tried to connect the VOIP to my asterisk, works as well, but cannot call any +1* numbers or numbers with brackets, since I dont know how to change the ipdialplan.xml in /windows...
I didn't know wich one of the .cab I should install so I installed both; I started with the drivers, it did nothing then I installed WM6Voip, it seemed to work. So I installed SIPconfigTool to configure my connection and I tested TomTom, the GPS was detected (whereas it wasn't with the original WM6Voip). Nevertheless, I tried to use my VoIP account over 3G but it couldn't connect (whereas Fring can connect).
works fine using tomtom 7 and GoSIP...
Yes, possibly the built-in VOIP cannot use STUN functionality, and fring can. I believe that to be a firewall issue.
However, now I seem to have that 5 seconds silence bug. I establish a connection, but 5 seconds into a call the diamond ceases to transmit voice. Receiving voice from the remote party however continues flawlessly. No Headset connected and not put into a docking station. Has anyone a similar problem or even a solution to that?
mcseven said:
Aaaah, thanks Saves me from Hardreset because the VOIP drivers wouldn't uninstall anymore... Have something in return: Here you have two CABs which do not install a dnsapi.dll, and tested them on my diamond. Works perfectly. You even dont have to reset the phone...
If feedback is positive, maybe the OP could change topic into "[solved]..."?
One tiny thing left to do: Change the ipdialplan.xml to make VOIP dial those "+1 (999) 1212 - 1212" numbers as well ^^
Thanks and enjoy,
Seven
Click to expand...
Click to collapse
I've installed both your CAB's. But i'm wondering why I can use VoIP to call? Should I have another program installed?
I've installed both your CAB's. But i'm wondering why I can use VoIP to call? Should I have another program installed?
Click to expand...
Click to collapse
Well, yes. Use a program called SIP config (anyone you like, I use this one) to program your provider settings into the phone. Then make sure to visit Settings->Phone->"Internet" Tab and change it from "Never" to a setting of your liking. After that (and pressing ok in the top right corner) it should register with your VOIP provider as soon as there is a data connection available. If your phone places a call via VOIP, it will ring a short audible "beep" prior to connecting. I found no way to tell it explicitly "use cellular network" or "use VOIP network" for placing a call. Perhaps this will be added in a later ROM.
However, now I seem to have that 5 seconds silence bug. (...)
Click to expand...
Click to collapse
I believe that to be a firewall issue as well. Yesterday I went home from work and put the phone directly into my home Wifi net with direct connection to my asterisk server. Everything works fine.
Today I used another access point at work, and it worked fine as well, so if you are having trouble getting voice to the remote party it most likely is your firewall's fault.
btw I have not found a way to use the internal=headset speaker, it will always use the loudspeaker for received audio.
wow, big THANKS.
works fine for me. Could connect to my Axon PBX with SIP and GPS also runs fine (Tested with tomtom7 and WMMiniGPS).
I realy waited for that and had also two hard resets behind me previous during tests
It almost works for me. I can connect, but my voice doesn't arrive to the other side of the line at all. Neither does the voice of the other side arrive to me. The line is open, but seems 'dead'.... what am I doing wrong?
ipdialplan.xml for sipgate in Germany
Fantastic, with the new cabs now GPS and WM6VoIP works. Attached a dialplan which I modified last year for my Kaiser. It works with my sip provider in Germany (sipgate) and you can dial local plan, leading 00 or + or 0. It may work also for others.
voip speaker
Great job!
Is there already any solution for the intern/extern speaker problem?
Hello chefs and others,
I'm looking for voip support from wm6.1 build 20721, meaning these 3 files (AFAIR): dnsapi.dll, voipphonecanvas.dll and rtcdll.dll.
Tried a few roms so far and neither of them supported voip, and i need it for my SIP
Tried to install various voip cabs (win6voip.cab, destr0_VOIP_WM61__SIP_Config_1.1.cab), but they all kill my gps.
There are some threads about this but non of them gave me an answer.
I hope you can help me. I don't want to choose between SIP and GPS.
regards,
--
Dragilla
When you say it kills your GPS what do you mean??? Just installing the cab or actually using it at the same time??
I use VOIP all the time and I haven´t noticed any problems with my TomTom although I never have them running at the same time
I mean just installing the cab causes the gps to be dead. It's not seen by any app. HTC_GPS_Tool doesn't show any NMEA frames, GPS Test pauses detecting gps on the port on which the gps should be.
I don´t have this problem and I use VOIP everyday.... so try my cab and let me know.
The only problem I have is the sound doesn´t come thru the internal speaker... but hey I´ve had this problem with Kaiser, Polaris and now Diamond so I´m used to it . The only device I had it working with the internal speaker was the Hermes.
Interesting
With standart win6voip.cab i had the sound through internal speaker. The SIP worked fine... only the gps was dead.
Will try your cab in a sec
I wonder if this matters that I use a never windows build... it could matter IMVHO...will see
Seems to solve the problem for me
Though I have the same problem with the sound coming out of the externat speeker, but I can live wih that
PS: in sip conf tool i can't set the registry entry saying i want to use sip on 3g as well, but that doesn't seem to matter because sip works on 3g anyways
PS2: found a neet tweak to keep wifi connection on while the device is off. This way I can receive SIP calls like ordinary calls - I love it
Thank you all for help - hopefully we can fix the speaker problem some day.
regards,
--
Dragilla
dragilla said:
PS2: found a neet tweak to keep wifi connection on while the device is off. This way I can receive SIP calls like ordinary calls - I love it
Click to expand...
Click to collapse
Schapps adv conf. also does that
dragilla said:
Seems to solve the problem for me
Though I have the same problem with the sound coming out of the externat speeker, but I can live wih that
PS: in sip conf tool i can't set the registry entry saying i want to use sip on 3g as well, but that doesn't seem to matter because sip works on 3g anyways
PS2: found a neet tweak to keep wifi connection on while the device is off. This way I can receive SIP calls like ordinary calls - I love it
Thank you all for help - hopefully we can fix the speaker problem some day.
regards,
--
Dragilla
Click to expand...
Click to collapse
Glad solved your problem!!! Maybe you can change the title of this thread and say this CAB at least solves the GPS compatibility problem.
No idea how to change thread title. I'm affraid only moderators can do that
dragilla said:
No idea how to change thread title. I'm affraid only moderators can do that
Click to expand...
Click to collapse
It´s fairly easy just edit the first post with Advanced editing button....
1. step press edit on post
2. at the bottom of that screen press Go Advanced
3. then you can edit the title
You can do it from here http://forum.xda-developers.com/forumdisplay.php?f=430 with double click in the end of line on your thread.
panosha said:
You can do it from here http://forum.xda-developers.com/forumdisplay.php?f=430 with double click in the end of line on your thread.
Click to expand...
Click to collapse
I never knew that.... that´s good to know. Thanks Panos. How are you anyway??
Done
Thanx for the advice.
UNLOCKING VoIP SIP Capabilities on Windows Mobile 6.1 XPERIA kills GPS
Regarding: iGO8 problems on XPERIA and WINDOWS MOBILE 6 PDAs and SMARTPHONES.
Anybody who unlocks the SIP VoIP capabilities of Windows Mobile 6.1 on an XPERIA X1 phone and wonders why GPS doesn’t work anymore – here’s your solution.
1) If you’ve already done so and now have a dead GPS hard reset your phone. All your data will be lost.
2) Use christonge’s CAB for unlocking VoIP SIP on WM 6.1, which can be found here: http://forum.xda-developers.com/showthread.php?t=422038 (Thank you christonge, saved my day!!!)
3) Test if GPS now works with GPS Test tool http://handheld.softpedia.com/get/GPS/GPS-Test-34335.shtml
Good luck!!!
Keywords: dead GPS iGO8 XPERIA X1 SonyEricsson VoIP SIP Windows Media 6.1 unlock
No sound while calling through VoiP
christonge said:
I don´t have this problem and I use VOIP everyday.... so try my cab and let me know.
The only problem I have is the sound doesn´t come thru the internal speaker... but hey I´ve had this problem with Kaiser, Polaris and now Diamond so I´m used to it . The only device I had it working with the internal speaker was the Hermes.
Click to expand...
Click to collapse
Hi,
I have the problem, that I can't hear my partner, when I'm calling via VoiP.
I can dial normally, the phone of my partner rings, but I can't hear anything. The phone recognizes, that my partner picked up the phone and starts the clock. When I speak, my partner can hear me, but not in the other direction. I can't hear anything.
If I call my Voip-number, my diamond also doesn't ring.
Is there anything I forgot?
Thank you!!!
Hi mates! Excuse me for my bad english, i'm an italian boy and i havn't sudied english wery well when i was at school...
I have an HTC TyTN II with WM6.1 (Boid 19212.1.0.3).
I've tryed to install varoius voip and sip config tool cabs but after each install my gps goes dead.
After each install i must do an hard reset to return to have the gps running.
The cab in the first page solve the gps troubleshooting?
In alternative, there is a cab that permitt to use voip and gps?
I would use internet calling and i need to use gps.
I won't hardreset never again.
Thank to all...
hi my name is Branko. I have same problem with X1 and sip and GPS. I downloaded that .cab file but when I installed it, I couldnt find program on my phone. Can you tell me what should I do?
Here my catch of the day:
Taken from an other forum (credits goes to lubo777):
http://www.minitelecom.org/downloads/images/voip/WM6VoIPFull.cab
HowTo: http://forum.ppcwarez.org/viewtopic.php?f=41&t=61730
Worked for me...
Yeah I think I've seen that one before & tried to use it...
Have you tried your GPS since you've installed that? Because I think that one breaks the GPS (at least on the Fuze units) .. and if it IS on a Fuze - is it actually working properly over 3G?
I have another version that I got to work without breaking the GPS - but never been able to get it to work over 3G on WM 6.x ....
Hey - would I recommend it if not ?!?
Sure I did - as I said working like a charm...
I have a TouchPro with the German V3 23001 Pro image (http://forum.xda-developers.com/showthread.php?t=529794) and as VoIP provider: Sipgate.de. Furthermore I checked that GPS is still working with GoogleMaps and sTevesTeve after install and setup and it was working as before.
With all other SIP setups I tried before, I had the same issue as you mentioned - they all rendered my GPS worthless -
BUT NOT THIS ONE!
Peace!
i gave up and use portsip as you can set the audio output http://forum.xda-developers.com/showthread.php?t=508715
Hmmm I also wonder what MrGAN is talking about... for two handsets (WM6.5) voip is not working properly!!!
Its so frustrating with WM6, Microsoft hasn´t any clue about how VOIP has to work on handsets.
Why don´t they learn from NOKIA??? My old E60 is still working beautiful on VOIP. Ringing on the external speaker, voice on the internal speaker. Just no difference between VOIP and GSM.
Microsoft, why is it so hard for you to understand???