Related
i was flashing ship ROM and on 1% it says this nbf is not for ur phone and stops, i've reset it and bootloader starts with ipl 1.01 spl 2.16, should i use NoID_ruu to flash other custom ROM?
you need to flash an official rom first, or a custom rom with updated bootloaders
dont look at my signature, that was before pda service replace my ROM with G3 chip, and ipl\spl was 1.0\1.03, then i did what is right to do - i flash an official ship rom, and then all go as i describe above
__s said:
i was flashing ship ROM and on 1% it says this nbf is not for ur phone and stops, i've reset it and bootloader starts with ipl 1.01 spl 2.16, should i use NoID_ruu to flash other custom ROM?
Click to expand...
Click to collapse
This is karma in action.
strange but last time i saw this combination of numbers my phone was dead , but now it's still alive, and i flash molski then faria rom and everything went fine. f..ing magic. praise the lord ppl.
__s said:
strange but last time i saw this combination of numbers my phone was dead , but now it's still alive, and i flash molski then faria rom and everything went fine. f..ing magic. praise the lord ppl.
Click to expand...
Click to collapse
=========
Try any 2.25 or 2.26 ROM before upgrading to Faria's, you'll have IPL, SPL 2.xx
dreamteam3x said:
=========
Try any 2.25 or 2.26 ROM before upgrading to Faria's, you'll have IPL, SPL 2.xx
Click to expand...
Click to collapse
thats what i did, everything is updated as my signature shows. thanx anyway
__s said:
thats what i did, everything is updated as my signature shows. thanx anyway
Click to expand...
Click to collapse
flash an official rom, then flash a custom rom
or maybe try downgrading to a 1.xx rom, then reflash and official rom, then flash a custom rom....
__s said:
thats what i did, everything is updated as my signature shows. thanx anyway
Click to expand...
Click to collapse
-------------------------
Here's what i did:
Original Rom on my 8125: IPL 2.25, SPL 2.25
-downgrade to 1.xx using CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM.=>Result: IPL 1.05, SPL 2.25.
-Copy and run Enaberapi.cab on my device
-Run lokiwiz 02b. Choose CID unlock.(fone restarts onced completed)
-Uprade to 2.26 ROM from Cingular_RUU_Wizard_2.26 =>Result: IPL 2.26, SPL2.26
-Upgrade again to FARIA's AKU 3.2 8MB.Result :IPL 2.26, SPL2.26 OS 3.0.0
Note:Faria's Rom doesn't include any bootloader version.You have to upgrade to 2.xx before uprgrade to Faria's.You may bricked your fone for a while if upgrading to Faria's with IPL 1.xx and SPL 1.xx
Good luck!
dreamteam3x said:
-------------------------
Here's what i did:
Original Rom on my 8125: IPL 2.25, SPL 2.25
-downgrade to 1.xx using CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM.=>Result: IPL 1.05, SPL 2.25.
-Copy and run Enaberapi.cab on my device
-Run lokiwiz 02b. Choose CID unlock.(fone restarts onced completed)
-Uprade to 2.26 ROM from Cingular_RUU_Wizard_2.26 =>Result: IPL 2.26, SPL2.26
-Upgrade again to FARIA's AKU 3.2 8MB.Result :IPL 2.26, SPL2.26 OS 3.0.0
Note:Faria's Rom doesn't include any bootloader version.You have to upgrade to 2.xx before uprgrade to Faria's.You may bricked your fone for a while if upgrading to Faria's with IPL 1.xx and SPL 1.xx
Good luck!
Click to expand...
Click to collapse
thanx ppl, but as said i did all this , everything is fine, im testing faria's rom atm, trying to figure out how to setup PAN, and a2dp seems have some problem too, but i think i'll manage this.
oops , its not allright, faria's rom flashed, os version is correct(build 3.2.0), but alot of things not working, i guess it is becuz of ipl 1.01 version, i need both of em to be 2.xx, i'll try to downgrade to 1.01 ruu costom rom, we'll see what will happend.
__s said:
dont look at my signature, that was before pda service replace my ROM with G3 chip, and ipl\spl was 1.0\1.03, then i did what is right to do - i flash an official ship rom, and then all go as i describe above
Click to expand...
Click to collapse
i wonder if your problems have anything to do with the fact that your chip was changed.. or maybe not done correctly
shogunmark said:
i wonder if your problems have anything to do with the fact that your chip was changed.. or maybe not done correctly
Click to expand...
Click to collapse
As far as i know, they will just change the whole maching rather than changing only the chips... The way the soldering is done on the chips means they can't be taken out easily...
vseehua said:
As far as i know, they will just change the whole maching rather than changing only the chips... The way the soldering is done on the chips means they can't be taken out easily...
Click to expand...
Click to collapse
they can actually, they are just surface mount chips, i used to work for a company doing component level repair on electronic devices... and removing a surface mount chip is quit simple with the right tools
shogunmark said:
they can actually, they are just surface mount chips, i used to work for a company doing component level repair on electronic devices... and removing a surface mount chip is quit simple with the right tools
Click to expand...
Click to collapse
I see... I am just thinking that these chips might be BGA chips, and hence can't be desoldered easily...
vseehua said:
I see... I am just thinking that these chips might be BGA array chips, and hence can't be desoldered easily...
Click to expand...
Click to collapse
didnt think of that, you might have a point there
The problem is that __s(tupid) just rushes in and doesn't read anything before flashing 'til the cows come home.
One clean guide. Thanks very much for this.
I am having a similar problem, had upgrades IPL/SPL to 3.08 and tried to load faria latest without success. tried to get the g3 8125 back to 1.xx using winbutton and lokiwiz but ende up with ipl 1.05 and spl 3.08. tried to use t-mobile 2.26 and the cingular oem and recieve an error saying i need to upgrade the nk.nbf. I am rnning out of ideas.
Thanks in advance for any help
Steve
Goibnui said:
I am having a similar problem, had upgrades IPL/SPL to 3.08 and tried to load faria latest without success. tried to get the g3 8125 back to 1.xx using winbutton and lokiwiz but ende up with ipl 1.05 and spl 3.08. tried to use t-mobile 2.26 and the cingular oem and recieve an error saying i need to upgrade the nk.nbf. I am rnning out of ideas.
Thanks in advance for any help
Steve
Click to expand...
Click to collapse
I think ur phone is still not unlocked,download WST Tool from the link below and check if it is CID unlocked,if not ,go through the unlocking method again:-
http://forum.xda-developers.com/showthread.php?t=329170
ur IPL1.5 & SPL 3.08,
keep on trying flashing button rom 1.05 a couple of more times u'll get both 1.05 or u may try this rom,it might do the trick:-
Xda_MiniS_LaunchROM_v154102
but personally, i believe ur phone is not cid unlocked,check it out
I'had read the thread about the radio ROM that the 2.x radio rom doest support with device with 1.x bootloader like the 1.x IPL and SPL..
My device have:
IPL 1.01
SPL 2.26
how was that?.. is my bootloader version 2 or 1?
sorry.. im new to wizard.. i just sell my himalaya and got wizard just yesterday..
ok nevermind..
i tried to flash 2.19 and 2.47 radio ROM without any problems.. means im 2.x bootloader..
If you don't fix your IPL you're going to have problems...
fixing IPL?
why?..
Because you're running 1.x IPL, that's why.
But, if it works for you, great.
i thought that all my problems are solve now regarding upgrading rom in wizard..
still have to find out how fix my IPL..
do you mean fixing is by upgrading my IPL to higher?
double_ofour said:
i thought that all my problems are solve now regarding upgrading rom in wizard..
still have to find out how fix my IPL..
do you mean fixing is by upgrading my IPL to higher?
Click to expand...
Click to collapse
i had the same situation whn my wiza was cid locked. i flashed it with Button;s rom and got the same situation: mixed IPL/SPL. I made cid unlocked procedure and then flashed the rom that contained IPL/SPL for my device.
i think im getting the logic here..
i should find a rom that contain 2.xx IPL/SPL to be able to upgrde in 2.xx IPL..
better search for that..
thanks for the help..
double_ofour said:
i think im getting the logic here..
i should find a rom that contain 2.xx IPL/SPL to be able to upgrde in 2.xx IPL..
better search for that..
thanks for the help..
Click to expand...
Click to collapse
I suggest the T-Mobile 2.26. In my tutorial you'll find the working link.
Good luck
Thanks Dr Puttingham..
im now getting familiar to wizard..
OK...I have a MDA. I upgraded to IPL/SPL 3.08 and radio version 2.69...then i wanted to CID-Unlock so i downgraded to the ROM that it says to run i forget the numbers exactly...but i got IPL 1.03(i think) and SPL 3.08 tried to unlock didn't work so ohh well now I'm trying to upgrade to T-Mobile 2.26 default rom and it wont work...first says Connection Fail...now says Upgrade ONLY...anyhelp? If you need more info lmk.
you messed up the IPL and SPL you should of CID unlocked before chnaging those versions...try loading a OEM rom to replace it all to the same then loading the button rom to and unlcok the mda then load the custom rom then load the Ipl and SPL and then flash from there
The Tmobile 2.26ROM will not flash...does anyone know where i can download an older version ipl/spl rom flasher? i think thats all i need to get it working but can't find it
keep reflashing the button rom until you have IPL and SPL of 1.xx
moto211 said:
keep reflashing the button rom until you have IPL and SPL of 1.xx
Click to expand...
Click to collapse
Any Idea how many times ill have to do that?
jaychym said:
Any Idea how many times ill have to do that?
Click to expand...
Click to collapse
I tried it couple of times but it didn't work. However I never tried 3.XX of the IPL/SPL. I had 2.2X of SPL and 1.XX of IPL when I unlocked the CID.
Got it working now...had to Flash Button ROM, run EnableRapi.cab on phone...then lokiwiz (U)nlock reboot (C)ID Unlock reflash Button ROM IPL/SPL matched then FLASH tmobile stock rom...worked like a charm YAY lol
1-15. Done
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
when i try this I can't get the SPL to go back, IPL is fine, but i've tried 4 sucessive times, no chance..
I then tried this :-
Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me )
that went ok, and then I tried flashing roms, but the only one I can get to work is the Wizzard Love ROM.
I'd love to run WM6 but i can't, if i try the other ROMS they flash ok, but I just go back to the Wizzard ROM when it reloads
any ideas ?
very many thanks, Will
Will_Plaice said:
1-15. Done
16. Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
when i try this I can't get the SPL to go back, IPL is fine, but i've tried 4 sucessive times, no chance..
I then tried this :-
Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me )
that went ok, and then I tried flashing roms, but the only one I can get to work is the Wizzard Love ROM.
I'd love to run WM6 but i can't, if i try the other ROMS they flash ok, but I just go back to the Wizzard ROM when it reloads
any ideas ?
very many thanks, Will
Click to expand...
Click to collapse
"17. My suggestion, take for what it's worth, is to download and install the T-Mobile 2.26 ROM
This will give you a strong 2.26 IPL and SPL to work with."
'Now you SHOULD have a IPL and SPL of 2.26 to work with. If not, you screwed up! Don't attempt to install someone's hard work and ***** before you do these steps!'
EDIT for Step 17 - Download and install the 3.08 IPL/SPL rather than the 2.26, your choice! (I suggest doing the T-Mobile 2.26 first but that's me
Well,
You missed the all important step 17,flashing the T-mobile 2.26,this cud have given you solid IPL/SPL 2.26 to work on,Instead opted for Edit to step 17,flashing 3.08.
Your device is not CID unlocked,download WST tool and check the status of your phone,
secondly you shudn't have upgraded your ipl/spl to 3.08,till you were sure your phone is cid unlock and both the ipl/spl are the same.
anyway download the wst tool to check your phone's status and post the report here,
bugger...
i tried another rom and am stuck in the bootloader...
i have 3.08 for IPL and SPL
I think the WST will not work from the bootloader (and i can't find it to download)
any further sugestions ?
I have tried both the t-mobile and button roms
tia will try not to do any more damage ;-)
Will_Plaice said:
bugger...
i tried another rom and am stuck in the bootloader...
i have 3.08 for IPL and SPL
I think the WST will not work from the bootloader (and i can't find it to download)
any further sugestions ?
I have tried both the t-mobile and button roms
tia will try not to do any more damage ;-)
Click to expand...
Click to collapse
In this particular situation no rom will flash,the only option is to get the IPL/SPL back to 1.xx,only than you can unlock.
If you are in boot loader,try to flash buttons 1.05 again,if worked,ok. otherwise download the latest official rom from the carriers site and flash,it will work and bring back your phone in working status.then flash button's 1.05 to unlock with lokiwiz02b.
Are you having any sdcard in your phone,remove it,it'll help,sometimes sdcard freezes the boot loader,by removing it,boot loader mode is released,good luck
many thanks, i came across a IPL SPL 2.26 only ROM and this I managed to get to flash, and with your advise I now have WM6
thanks, Will
Will_Plaice said:
many thanks, i came across a IPL SPL 2.26 only ROM and this I managed to get to flash, and with your advise I now have WM6
thanks, Will
Click to expand...
Click to collapse
THANKS
Glade it's up and running
I believe that my brother' Wizard is CID unlocked already, because I also flashed many WM5 into it. But few days ago I tried to flash the WM6.1 and now it is stuck at the 1st splash screen.
I have a lot experiences from flashing rom by Hermes, Atom, Herald, Kaiser… I have read and tried many time how to solve this problem but it did not work. The re-flashing progress was exellent with ’ CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE’, the screen still say as below:
IPL 1.01
SPL 3.08
GSM 01.12.01
OS 1.5.4.2
But any flash with other roms like T-Mobile 2.26 was stopped by connection or ID errors. The problem is how can I get the IPL/SPL back to 1.xx!
Appreciate any help!
Thanks!
Run the button rom ( custom rom you identified ) again - it can take a few tries, but both your ipl and spl have to be the same 1.xx
You need ipl/spl of 1.xx to unlock
You need ipl/spl of 2.xx to upgrade to wm6
I had to run the button rom twice to achieve this
Good luck
bill_in_mtl said:
Run the button rom ( custom rom you identified ) again - it can take a few tries, but both your ipl and spl have to be the same 1.xx
You need ipl/spl of 1.xx to unlock
You need ipl/spl of 2.xx to upgrade to wm6
I had to run the button rom twice to achieve this
Good luck
Click to expand...
Click to collapse
I know how to do it and did it many (10 ) times with custom rom but no good result. The IPL has been downgarded to 1.01 but SPL is still 3.08.
Anyway, thanks for your reply!
Sorry about that - was just trying to help
Check out the response from mestrini on the attached thread - he mentions something about the spl freezing if you downgrade from 3.xx to 1.xx
I was not aware of this info - and perhaps mestrini can give you some details on how to get around it - if that is the issue here.
http://forum.xda-developers.com/showthread.php?t=377038
Try to bring ipl to 3.08 by reflashing ipl/spl 3.08 to bring both ipl/spl to 3.08 and then flash the official stock rom to downgrade to 2.xx and then downgrade to 1.xx by button's rom 1.05.
Cheers!
zabardast_1 said:
Try to bring ipl to 3.08 by reflashing ipl/spl 3.08 to bring both ipl/spl to 3.08 and then flash the official stock rom to downgrade to 2.xx and then downgrade to 1.xx by button's rom 1.05.
Cheers!
Click to expand...
Click to collapse
I also did it many times by using IPL_SPL_3.08.rar, but after that could not flash with T-Mobile 2.26 rom to downgrade to 2.26. The connection error always appear.
2 days ago, before bringing IPL/SPL to 3.08 I also brought it to 2.26 and the flash ran well. But when I tried to downgrade to 1.xx by button rom 1.05, only the IPL was changed to 1.xx, SPL was still the same as 2.26.
I realized that many people succeeded by doing this but not me even the process is the same step by step! And I really dont know why?
nugift said:
I also did it many times by using IPL_SPL_3.08.rar, but after that could not flash with T-Mobile 2.26 rom to downgrade to 2.26. The connection error always appear.
2 days ago, before bringing IPL/SPL to 3.08 I also brought it to 2.26 and the flash ran well. But when I tried to downgrade to 1.xx by button rom 1.05, only the IPL was changed to 1.xx, SPL was still the same as 2.26.
I realized that many people succeeded by doing this but not me even the process is the same step by step! And I really dont know why?
Click to expand...
Click to collapse
If it had once got spl 2.26,you shud have tried to flash the button's a couple of more times to downgrade the spl to 1.xx,why again you upgraded to 3.08. Now I believe the SPL is locked at 3.08 and it requires more efforts to downgrade to 2.xx,the only way is to keep on flashing the tmo 2.26 some more times,if you are lucky,it might downgrade.Otherwise upgrade to 3.08 and keep using wm5 official stock Rom.
Cheers!