Related
The desire is to CID unlock the 8125 so the phone can be Summiter-ized. This was new-in-the-box from Cingular:
ipl 2.25
spl 2.25
GSM 02.25.11
OS 2.25.11.1
I saw faria's post http://forum.xda-developers.com/viewtopic.php?t=47848 but it states this won't work above 2.21.
I believe I can downgrade to the 1.08 original stock image posted in the FTP area, but I'm not certain this will work. I read where someone tried downgrading and the spl remain 2.x and things didn't work out so well. This is where I read it: http://forum.xda-developers.com/viewtopic.php?t=50768&postdays=0&postorder=asc&start=75
The quote directly above is from the lokiwiz0.3 thread http://forum.xda-developers.com/viewtopic.php?t=50768 - but no one's actually confirmed it will unlock Cingular's latest ROM. Folks there just mention up to about 2.21 or so and the thread shifted to talk about the G4 chip and it's challenges.
Has anyone with a new Cingular phone tried lokiwiz0.3? Or how about CID unlocking anything higher than a 2.21 ROM? I'd just try this myself, but I'm stepping a buddy through this remotely. I can carry him all the way with URLs, cool cabs, and tweaks, all I need help with is something I haven't personally had to face - I don't wish to brick his phone.
Thanks for any testimonials!
Is it G3 or G4 phone? If it's a G4 phone then you can not downgrade to 1.x Rom as they don't include G4 bootloader.
kyphur said:
Is it G3 or G4 phone? If it's a G4 phone then you can not downgrade to 1.x Rom as they don't include G4 bootloader.
Click to expand...
Click to collapse
It's G3; there's no trailing decimalization on the ipl / spl.
I have the same ipl/spl, and the unlock tool did not work for me, i would also like to know if its possible to downgrade this rom...
Give it a try.
I think you might need to replace one file, "RUUGetInfo.exe".
Try this:
Download the Cingular 1.8 Rom.
Rename it from *.exe to *.rar
Open the rar and extract the files into an empty folder.
Replace the "RUUGetInfo.exe" file with the attached one.
Run RomUpdateUtility.exe
If everything worked it will think you phone has ver 1.2 Rom so it will allow the 1.8 upgrade.
As always, try at your own risk...
Is this the rom i should be using? ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Im having problems finding the original Cingular 1.8 rom anywhere...
virtualsandwich said:
Is this the rom i should be using? ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Im having problems finding the original Cingular 1.8 rom anywhere...
Click to expand...
Click to collapse
No.. Not CID unlocked, use the Cingular 1.8:
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe
before downgrading to a 1.x rom be sure your IPL/SPL version DOES NOT END WITH .0001
kyphur said:
virtualsandwich said:
Is this the rom i should be using? ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Im having problems finding the original Cingular 1.8 rom anywhere...
Click to expand...
Click to collapse
No.. Not CID unlocked, use the Cingular 1.8:
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe
before downgrading to a 1.x rom be sure your IPL/SPL version DOES NOT END WITH .0001
Click to expand...
Click to collapse
hi friend...
did you manage to unlocke the pda?
faria said:
hi friend...
did you manage to unlocke the pda?
Click to expand...
Click to collapse
If you are asking me, mine has always been CID unlocked, just trying to help the new guys a bit...
kyphur said:
faria said:
hi friend...
did you manage to unlocke the pda?
Click to expand...
Click to collapse
If you are asking me, mine has always been CID unlocked, just trying to help the new guys a bit...
Click to expand...
Click to collapse
haa.. tough it was you
Alright i got it unlocked without replacing RUUGetInfo.exe, i downloaded the 1.8 rom, the phone took it without problem, then Lokiwiz worked like a charm after downgrading the rom. THANKS!
virtualsandwich said:
Alright i got it unlocked without replacing RUUGetInfo.exe, i downloaded the 1.8 rom, the phone took it without problem, then Lokiwiz worked like a charm after downgrading the rom. THANKS!
Click to expand...
Click to collapse
So just to be clear, you had a brand new store bought or telesales Cingular 8125 CID locked with ipl / spl 2.25 and you simply re-flashed it with the stock Cingular 1.08 ROM - and it worked?
If you haven't re-flashed already, would you mind sharing the ipl / spl (and other) versions?
100Tbps said:
virtualsandwich said:
Alright i got it unlocked without replacing RUUGetInfo.exe, i downloaded the 1.8 rom, the phone took it without problem, then Lokiwiz worked like a charm after downgrading the rom. THANKS!
Click to expand...
Click to collapse
So just to be clear, you had a brand new store bought or telesales Cingular 8125 CID locked with ipl / spl 2.25 and you simply re-flashed it with the stock Cingular 1.08 ROM - and it worked?
If you haven't re-flashed already, would you mind sharing the ipl / spl (and other) versions?
Click to expand...
Click to collapse
humm ....yes... i would like to know that to...
Latest G3 Cingular ROM update worked
It works for me too. I just ran lockwiz3.0a to unlock SIM, than downgraded to ver 1.8. Then run lockwiz 2.0b to unlock CID and then install latest custom AKU3.0 ROM. Thanks everyone contributed to that forum.
Work for me. Here's what i did to my new (warranty exchange) 8125 with IPL/SPL 2.25
- unlock SIM lock with Lokiwiz03a
- downgrade to 1.08 with Cingular_RUU_1.8.11.1.WWE.ship.exe
- it now has IPL 1.08 and SPL 2.25
- unlock CID with Lokiwiz02b
- upgrade to PDAMobiz AKU2.3 v120 (the best ROM i've tried so far)
I believe you could skip SIM unlock with Lokiwiz03a and unlock both SIM and CID with Lokiwiz02b after downgrade to IPL1.08/SPL2.25.
dont know why other people in Lokiwiz03a thread said not to do unlock if IPL and SPL are not the same and will brick the phone. may be he had G4 chip.
kanate said:
dont know why other people in Lokiwiz03a thread said not to do unlock if IPL and SPL are not the same and will brick the phone. may be he had G4 chip.
Click to expand...
Click to collapse
G4 phone can't downgrade at all. 1.x Roms do not have G4 Bootloaders.
A few users have had problems when their IPL/SPL versions don't match. So there is the possibility that you will brick your phone.
Did you bother going into the OS on the phone at all after the downgrade to unlock? or did you just connect it to USB and run lokiwiz?
kyphur said:
kanate said:
dont know why other people in Lokiwiz03a thread said not to do unlock if IPL and SPL are not the same and will brick the phone. may be he had G4 chip.
Click to expand...
Click to collapse
G4 phone can't downgrade at all. 1.x Roms do not have G4 Bootloaders.
A few users have had problems when their IPL/SPL versions don't match. So there is the possibility that you will brick your phone.
Did you bother going into the OS on the phone at all after the downgrade to unlock? or did you just connect it to USB and run lokiwiz?
Click to expand...
Click to collapse
Sure thing, you need to sync and go into the OS to install EnableRapi.cab in order to use Lokiwiz02b anyway.
After it's downgraded to IPL1.08/SPL2.25, I let the phone customized itself with all those cingular things and reboot again and install EnableRapi.cab and run Lokiwiz02b to unlock the CID
I have the IPL/SPL 2.25 version of the 8125 ROM.
For some reason, after unlocking with lokiwiz03a, downloading and unpacking etc the 1.8 ROM, i run it and get an ERROR 202: Connection, that it doesn't find my phone
The phone IS connected, synched etc etc. Could this be a problem because I'm running windows vista?
hmm.
edit: with windows xp, I can begin the flash (my 8125 goes to the tri-color, displays IPL and SPL of 2.25, but then the program throws an ERROR 260: UPDATE ERROR, then tells me the recovery steps (it always jsut boots to WINCE after this.)
Anyone know whats up?
Quote:
"Work for me. Here's what i did to my new (warranty exchange) 8125 with IPL/SPL 2.25"
key words being warranty exchange?
or will this work on a brand new one?
just thought I'd ask
and to Clutch: how's the phone now? How exactly does one know of the Ipl/Spl #'s?
I believe as long as it's G3 chip (IPL & SPL don't end with 0001), it should work.
i was flashing ship ROM and on 1% it says this nbf is not for ur phone and stops, i've reset it and bootloader starts with ipl 1.01 spl 2.16, should i use NoID_ruu to flash other custom ROM?
you need to flash an official rom first, or a custom rom with updated bootloaders
dont look at my signature, that was before pda service replace my ROM with G3 chip, and ipl\spl was 1.0\1.03, then i did what is right to do - i flash an official ship rom, and then all go as i describe above
__s said:
i was flashing ship ROM and on 1% it says this nbf is not for ur phone and stops, i've reset it and bootloader starts with ipl 1.01 spl 2.16, should i use NoID_ruu to flash other custom ROM?
Click to expand...
Click to collapse
This is karma in action.
strange but last time i saw this combination of numbers my phone was dead , but now it's still alive, and i flash molski then faria rom and everything went fine. f..ing magic. praise the lord ppl.
__s said:
strange but last time i saw this combination of numbers my phone was dead , but now it's still alive, and i flash molski then faria rom and everything went fine. f..ing magic. praise the lord ppl.
Click to expand...
Click to collapse
=========
Try any 2.25 or 2.26 ROM before upgrading to Faria's, you'll have IPL, SPL 2.xx
dreamteam3x said:
=========
Try any 2.25 or 2.26 ROM before upgrading to Faria's, you'll have IPL, SPL 2.xx
Click to expand...
Click to collapse
thats what i did, everything is updated as my signature shows. thanx anyway
__s said:
thats what i did, everything is updated as my signature shows. thanx anyway
Click to expand...
Click to collapse
flash an official rom, then flash a custom rom
or maybe try downgrading to a 1.xx rom, then reflash and official rom, then flash a custom rom....
__s said:
thats what i did, everything is updated as my signature shows. thanx anyway
Click to expand...
Click to collapse
-------------------------
Here's what i did:
Original Rom on my 8125: IPL 2.25, SPL 2.25
-downgrade to 1.xx using CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM.=>Result: IPL 1.05, SPL 2.25.
-Copy and run Enaberapi.cab on my device
-Run lokiwiz 02b. Choose CID unlock.(fone restarts onced completed)
-Uprade to 2.26 ROM from Cingular_RUU_Wizard_2.26 =>Result: IPL 2.26, SPL2.26
-Upgrade again to FARIA's AKU 3.2 8MB.Result :IPL 2.26, SPL2.26 OS 3.0.0
Note:Faria's Rom doesn't include any bootloader version.You have to upgrade to 2.xx before uprgrade to Faria's.You may bricked your fone for a while if upgrading to Faria's with IPL 1.xx and SPL 1.xx
Good luck!
dreamteam3x said:
-------------------------
Here's what i did:
Original Rom on my 8125: IPL 2.25, SPL 2.25
-downgrade to 1.xx using CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM.=>Result: IPL 1.05, SPL 2.25.
-Copy and run Enaberapi.cab on my device
-Run lokiwiz 02b. Choose CID unlock.(fone restarts onced completed)
-Uprade to 2.26 ROM from Cingular_RUU_Wizard_2.26 =>Result: IPL 2.26, SPL2.26
-Upgrade again to FARIA's AKU 3.2 8MB.Result :IPL 2.26, SPL2.26 OS 3.0.0
Note:Faria's Rom doesn't include any bootloader version.You have to upgrade to 2.xx before uprgrade to Faria's.You may bricked your fone for a while if upgrading to Faria's with IPL 1.xx and SPL 1.xx
Good luck!
Click to expand...
Click to collapse
thanx ppl, but as said i did all this , everything is fine, im testing faria's rom atm, trying to figure out how to setup PAN, and a2dp seems have some problem too, but i think i'll manage this.
oops , its not allright, faria's rom flashed, os version is correct(build 3.2.0), but alot of things not working, i guess it is becuz of ipl 1.01 version, i need both of em to be 2.xx, i'll try to downgrade to 1.01 ruu costom rom, we'll see what will happend.
__s said:
dont look at my signature, that was before pda service replace my ROM with G3 chip, and ipl\spl was 1.0\1.03, then i did what is right to do - i flash an official ship rom, and then all go as i describe above
Click to expand...
Click to collapse
i wonder if your problems have anything to do with the fact that your chip was changed.. or maybe not done correctly
shogunmark said:
i wonder if your problems have anything to do with the fact that your chip was changed.. or maybe not done correctly
Click to expand...
Click to collapse
As far as i know, they will just change the whole maching rather than changing only the chips... The way the soldering is done on the chips means they can't be taken out easily...
vseehua said:
As far as i know, they will just change the whole maching rather than changing only the chips... The way the soldering is done on the chips means they can't be taken out easily...
Click to expand...
Click to collapse
they can actually, they are just surface mount chips, i used to work for a company doing component level repair on electronic devices... and removing a surface mount chip is quit simple with the right tools
shogunmark said:
they can actually, they are just surface mount chips, i used to work for a company doing component level repair on electronic devices... and removing a surface mount chip is quit simple with the right tools
Click to expand...
Click to collapse
I see... I am just thinking that these chips might be BGA chips, and hence can't be desoldered easily...
vseehua said:
I see... I am just thinking that these chips might be BGA array chips, and hence can't be desoldered easily...
Click to expand...
Click to collapse
didnt think of that, you might have a point there
The problem is that __s(tupid) just rushes in and doesn't read anything before flashing 'til the cows come home.
One clean guide. Thanks very much for this.
I am having a similar problem, had upgrades IPL/SPL to 3.08 and tried to load faria latest without success. tried to get the g3 8125 back to 1.xx using winbutton and lokiwiz but ende up with ipl 1.05 and spl 3.08. tried to use t-mobile 2.26 and the cingular oem and recieve an error saying i need to upgrade the nk.nbf. I am rnning out of ideas.
Thanks in advance for any help
Steve
Goibnui said:
I am having a similar problem, had upgrades IPL/SPL to 3.08 and tried to load faria latest without success. tried to get the g3 8125 back to 1.xx using winbutton and lokiwiz but ende up with ipl 1.05 and spl 3.08. tried to use t-mobile 2.26 and the cingular oem and recieve an error saying i need to upgrade the nk.nbf. I am rnning out of ideas.
Thanks in advance for any help
Steve
Click to expand...
Click to collapse
I think ur phone is still not unlocked,download WST Tool from the link below and check if it is CID unlocked,if not ,go through the unlocking method again:-
http://forum.xda-developers.com/showthread.php?t=329170
ur IPL1.5 & SPL 3.08,
keep on trying flashing button rom 1.05 a couple of more times u'll get both 1.05 or u may try this rom,it might do the trick:-
Xda_MiniS_LaunchROM_v154102
but personally, i believe ur phone is not cid unlocked,check it out
Hi all. Tried and tried in vain, to replace the T-mobile splash screen, only to find out that the phone is CID locked.
Managed to upgrade to WM6 though, thanks to vlodeck and nocturne.op.15
Here's the phone details:
IPL: 2.06
SPL: 2.06.0000
GSM: 02.19.21
OS: 10.2.0.8 (WM6 by vlodeck & nocturne)
Oh, and also worth mentioning, my PC is running on Vista Ultimate, on which RUU's don't work. But some people said that if I install VMWare Virtual PC and install XP on that, RUU works through it.
So, how to unlock CID of this phone?
Wish I knew!
I'm in the same boat, so please can someone advise, thanks.
to cid unlock to need a ver. 1.xx of ipl/spl. And seeing you have 2.xx you cant really downgrade to ver.1.x
but can you told me whats rom have ispl ipl 1.x??
ok so saying you have ipl 1. what ever how do you cid unlock?
ftp://[email protected]/Up...er_1120223_11202110_11220_T-MobileUK_Ship.rar
will have ipl and spl ver 1. wherever you can get to install or not, might work with a noID ruu. then you can use lokiwiz2 to unlock the CID
There are rom versions that have 1.xx IPL and SPL but from my own experience I know, that once you upgraded to 2.xx or more, you cant get back to 1.xx. The most you can get is 1.xx IPL and 2.xx SPL.
Cheers,
vlodeck.
So, What ROM we must flash? To have 1.xx IPL and 2.xx SPL?
Maybe offtopic, but I have another question: If I have ROM from ERA GSM POLAND can I flash AKU3.3 TMobileUK ROM?
Charmer community is so small.... ;(
adexxx, you misunderstood me. You can't get 1.xx IPL and 1.xx SPL once you've already upgraded to 2.xx.
If it's an official ROM then you can flash it no problem. If its a custom ROM, use the tool I described in WM6 charmer thread.
When I tried to update with RUU: RUU_Charmer_38221_382127_026921_TMO_HR_WWE_Ship it showed error: INVALID VENDOR
What I'm doing wrong?
use wizard noID upgrade utility. it's some around here, maybe even in charmer forum.
OK, I flashed and it works fine.
Now I have 3.0 IPL&SPL, my 1st splash was changed.
[offtopic end]
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
you say with the wm6 oficcial there is not a official rom for wizard tellme what rom do you used
AndyG said:
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
Click to expand...
Click to collapse
I bet you went from 1.02 to 3.08 without stopping at 2.xx
Maybe that's the cause?
but he says than he flashed with the oficcial rom there is no oficcial are agree
Hi Guys,
Thanks for the quick replies.. I used
http://forum.xda-developers.com/showthread.php?t=310954
( about quarter way down it says official download site for WM6.0.0)
Mestrini - Yes i went straight from 1.02 to 3.08 coz i cannot find the V2.xx IPL/SPL files but i have found the updater solely for the IPL/SPL to 3.08 which is what i used.
is that any use ??
flash your phone with the tmobile 2.26, that should correct your issue. It will also give you the 2.26 version of spl/ipl
ok if you had a cid unlocked device search in the forum for the t-mo 2.26 ipl/spl after you can update for the rom as you tell
en joy it
Thanks for the advice guys, ive tried several different roms and i have a consistent problem where it will not let me change the rom as ( i think ) my SPL version is still 3.08 and every ROM bombs out with "this is an upgrade only"
help me downgrade my IPL/SPL back to 1.02 pleaseeeee
cheers.
Andy
jb007jb
Junior Member
Join Date: Jul 2007
Posts: 6
Default Do Not Upgrade To 3.08 !!!!!!!!!!!!
Hi,
i have T-Mobile MDA and Im stuck with spl 3.08
I did everything.......... and I mean EVERYTHING and nothing helps me bring back my MDA to the original T-mobile software or downgrading the SPL.
1. Downgrading my IPL to 1.01 (using button rom)
2. Unlocking CID with lokiwiz (successfully)
3. Running button rom again
The SPL still stays 3.08 after doing the above...
If there is another way to downgrade the SPL 3.08, please let me know. I really need the T-mobile original rom version.
Thanks so much.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Reply With Quote
Click to expand...
Click to collapse
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
Thanking everyone who has taken the time to contribute
Andy. ( looking hopefully around too ;o) )
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
Click to expand...
Click to collapse
Thats your problem, reflash the 1.02 rom again, both IPL and SPL have to be the same.
hey nottoosmart
i know... i need to find a way to drop the SPL back to 1.02 or thereabouts. i cant flash back to the T-Moblie 2.26 ROM coz it says my SPL is too high. i upgraded my IPL and SPL using a rom updater now whatever i try i cannot drop the SPL version.
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
...
Andy. ( looking hopefully around too ;o) )
Click to expand...
Click to collapse
Maybe, just maybe, the O2 ROM may help you. Please see http://forum.xda-developers.com/showpost.php?p=1379884&postcount=2 That post is from vippie - so you know that you can rely on it!
kernelguy
Hi All,
I have not been able to unlock my Cingular 8125... to upgrade the thing to WM6.
Yip ran the lockwiz a few times... it did give me some write error though.
...
CopyFileToTFFS(unlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072746
Your phone is now unlocked...
My phone is a G3. I can use different sims. But I cannot CID unlock? I have used lokiwiz and awizard... what else can I do to CID unlock?
I am currently downloading your rom.I have not tried any roms as I am quite new to this. I have flashed my 8125 to - IPL1.01 SPL 3.08 gsm 01.12.10 os1.5.4.2.
I have also tried several time to downgrade to button... no joy, the spl wont go. I have upgraded to both ipl/spl3.08 and still cannot upgrade the rom.
Thanks,
SanMan
Did you read the sticky with the guide to an easy and safe unlocking by Dr. Puttingham? If you did then you should have read with more attention.
You've messed up your phone's bootloader. It's not supposed to have such different values. If you didn't unlock it before moving to SPL 3.08 you won't be doing it now as it must be 1.xx for lokiwiz and other tools to work.
Go READ threads of others in same situation as you and be sure to have a FULL battery before starting the flashing process.
great thanks for that... so since my spl and ipl are not the same I need to try to downgrade my spl to the same version of button?
Bud I have read and read and read... and now I have only posted. I see that people in my predicament look for a rom called 1.18 from cingular and apparantly that fixes the problem so I can downgrade and re-run my cid unlock. I will read through all of Dr Putting threads where I have also posted to try to resolve this. Thanks for you constructive assistance.
Kind regards,
SanMan
We were all at this point in our lives sometime.
Need rom for downgrade
hi SandfordE,
Could you please send me the link or the file that downgrade the rom to 1.xx. i have tried to looking for so much time but sill can't not. all link is dead.
please, thank you for your help
the blind leading the blind.
well the only one I have been able to get is this one, from Dr putting
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
I cannot find the 1.xx cingular rom which apparantly you need if you dont follow dr p, goodies properly.
Apparantly if you goto http://www.htcwizardweb.net/node/161 and register there is a pathetically slow download link for 1.8x... which should be able to change the ipl and spl to the same thing.
hope this helps you. Please dont run or upgrade anything on ure phone till both the ipl and spl are 1.x that where I made my mistake.
Being a techie I guess thats our problem always wanting to upgrade with out rtfm.
hth
San
Thank SanFordE
Downloading, then downgrade to ipl/spl 1.xx, then cidunlock then uprade to ipl/spl 2.xx then update to wm6.
Am i correct??
thanks again for your help
hi magic
yip thats exactly what I am doing, hopefully it will work, please could you post ure results. Pity bandwidth here in South Africa is so terrible else i would be able to download at home.
Thanks man,
Sanford
hi SanfordE,
why my ipl is 1.xx but the spl still 2.xx after flash sucessfully??
Thanks
Hi,
This worked for me, now i just need to flash the ipl/spl 2.xx then ready for wm6
Thanks
Maybe try to flash with button from dr p sticky... but remember before you can do anything else the like run lokiwiz, the ipl and spl need to be 1.xx
hope this helps.
s
SanfordE said:
Maybe try to flash with button from dr p sticky... but remember before you can do anything else the like run lokiwiz, the ipl and spl need to be 1.xx
hope this helps.
s
Click to expand...
Click to collapse
wow, i'm impressed . You passed from asking for tutoring to giving good tips in no time. well done m8 . All you need now is to manage the successful downgrade.
Are you sure your phone is still locked? Check CID status with mtty.
Thanks for that tip
Got already will try this procedure again tonight... hopefully it works.
hi SanFordE,
now i'm on wm6. thank a lot for your support
Hi MagicEr,
How many times did you have to flash with 1.8.11
I have tried twice already and my spl is still 3.08...
Maybe downgrade to Wizard_Love 2.26? The rey the other way?
Any input is kewl...
no worries S
WM6 is lovely...
All fixed on WM6
Note to all good people, once you have flashed with 1.8.11 <-- this is only on a cingular 8125, even though the spl is 3.08, you can run your lokiwiz to CID unlock and then flash.
Many thanks to all the developers and contributors to this forum.
Sanford
SanfordE said:
All fixed on WM6
Note to all good people, once you have flashed with 1.8.11 <-- this is only on a cingular 8125, even though the spl is 3.08, you can run your lokiwiz to CID unlock and then flash.
Many thanks to all the developers and contributors to this forum.
Sanford
Click to expand...
Click to collapse
hmm not sure if the SPL is really 3.08 although it shows that.
The CID block protection is applied by SPL so if lokiwiz worked it means that the SPL did downgrade
Glad you fixed it though.
cheers