Related
Guys,
Anyone has solution to put widcomm into BA's WM 5.0?
Really really wan it man!!! no Widcomm my stereo headset is wasted...
This is really the most fundamental problem....sigh...
Cheers
At this moment, only MS BT stack works under WM5 so far.
Edit: deleted
efjay said:
Here's something i found on the pdaphonehome forums http://www.pdaphonehome.com/forums/showthread.php?s=&threadid=53643 originally posted by Superdave
Quote from pdaphonehome forums
"Widcomm BT Stack working
After all kinds of messing I finally got the widcomm stack working on the i730. Im still exploring and have alot of testing and documenting to do, but, I just thought I would post a progress thread.
,Dave
Tested and working Profiles..
DUN (Dialup Networking)
Serial
FTP
A2DP (High Quality Audio)
File Transfer
Business Card Exchange ( OBEX )
Network Access (PAN)
Ok,
Here's the first rough. These instructions worked from a hard reset for me.
Using registry Editor
Go to HKLM\Software\Microsoft\Bluetooth\Transports\Builtin\3 and rename the value "name" to "aname"
That will disble the MS bluetooth stack, but, still allow it to intialize the radio.
--Soft Reset.
Download BT3900.CAB fromhttp://www.myehud.com/xv6600/bluetooth/, copy it to the phone and install it.
In reg editor go to HKLM\Software\Widcom\BTConfig\General
Change TransportLibrary to "BtCeBCSPTrans.dll"
Change RadioInitLibrary to ""
Change RadioInitPostLoadScript to ""
Change RadioWLanCoexEnable to ""
Change RadioWLanCoexDisableScript to ""
In reg editor go to HKLM\Drivers\Builtin\Serial
Change driver to anemo_serial.dll
In reg editor go to HKLM\Software\Widcom\BTConfig\SerialTransport
Change Parity to 2
Change Port to 5
In reg editor go to HKLM\Software\Widcom\BTConfig\Services\0001
Change ComPortNumber to 2
In reg editor go to HKLM\Drivers\BuiltIn\Serial5
Change DeviceArrayIndex to 2
Change Index to 2
Create a shortcut in Windows\Startup pointing to \windows\BTTrayCE.exe
--Soft Reset
You can now turn the radio on from the icon on the today screen (lower right).
If desired you can also install the A2DP patch from http://www.myehud.com/xv6600/bluetooth/
If you get license expired after a few seconds (you should). You'll need to copy over the
BTTrayCe.exe from the working dir of the bt-ppc.1.5.0.0801.rar you can find here.
http://forum.xda-developers.com/vie...xpired&start=50
Notes
If the radio turns on but you cant detect devices check your mac address
You can check you Macaddress by going to HKLM\Microsoft\Blueooth\i730 and looking at the key MACADDRESS.
If you go to settings\accessibility in the widcomm bt stack with the radio on the addresses should match.
If they dont match you'll need to turn your radio off, soft-reset then turn it back on.
You should be able to switch between the 2 stacks by changing the aname back to name under transports"
Looking through the thread it appears to have worked for some people. I tried it myself but was getting an error. I also couldnt find the driver he mentioned "anemo_serial.dll". I would think as the BA radio works with the 3900 stack already it may be possible to get it working under WM5. Anyone with any ideas?
Click to expand...
Click to collapse
Just tried. does not work, insufficent driver memory.
****. DO NOT try that tuturial. After i did that, my BA couldn't detect the GSM radio anymore, i had to Hard Reset....
Hi!
I did the oficial ROM upgrade and everithing seems to work fine except that i can't seem to find the GPS anywhere?
Can anyone help me?
Thanks,
JP
Hiden GPS Icon
Having tried the new HTC rom I found that the GPS WAS enabled (Tried it with Tomtom 6) but the GPS Icon in the settings menu is still hidden.
To enable/unhide the icon use a registry editing program and change the numerical value of the DWORD string that reads 'HIDE' from '1' to '0', then soft reset the device.
There are a couple of threads that can explain how to do this in more detail elseware on this forum.
1.
Sometimes GPS takes too long to fixup
Hi!
I discover the problem. Sometimes the GPS takes 10 or 15 minutes to fixup!!! I've read that this is a known problem without solution.
Thanks anyway.
JP
jpierre70 said:
Hi!
I discover the problem. Sometimes the GPS takes 10 or 15 minutes to fixup!!! I've read that this is a known problem without solution.
Thanks anyway.
JP
Click to expand...
Click to collapse
Not first fix, on clear sky, without moving during fix? I've read only one complaint, and it didn't say the conditions that made that fix so long.
devious246 said:
Having tried the new HTC rom I found that the GPS WAS enabled (Tried it with Tomtom 6) but the GPS Icon in the settings menu is still hidden.
To enable/unhide the icon use a registry editing program and change the numerical value of the DWORD string that reads 'HIDE' from '1' to '0', then soft reset the device.
There are a couple of threads that can explain how to do this in more detail elseware on this forum.
1.
Click to expand...
Click to collapse
In the regisrty there are a lot of folder wich one contain the DWORD?
if this is your level of understanding of the registry I strongly suggest you DO NOT try and modify until you thoroughly research it!
You may end up having to hard reset your device.
I already modify it last time but i forgett where theDowrd is..Under wich menu on the registry
OK Brigate- sorry just wanted to warn you!
I would do a search- this took me 10 nano seconds ;-) It's quicker than posting and waiting for a reply.
/snip
HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Add a DWORD called "Group" and give it the value of "2" (dec) keep the Hide key but change the value to 0 and delete the redirect value and soft reset
If you have a GPS device, you can add a GPS settings icon to your Start > Settings menu using:
HKLM\ControlPanel\GPS Settings\Group = 2 (DWORD decimal)
HKLM\ControlPanel\GPS Settings\redirect <-- delete, or rename, this value
Note that '2' stands for the Connections tab, '1' is System and '0' would be Personal
Note also that this has reportedly disabled one person's USB connectivity. To restore, set "GPS Program Port = None", "GPS Connection Port = None", "Automatic GPS Management = on"
/ snip
This rings a bell- I tried it a long time ago on my M600 thinking the icon would help (it just stopped my BT GPS working!)
Well thx a lot
I use resco to modify the register but every time i do a softreset it returns all as default... So at last i can`t get the GPS ICON
BrigateGB said:
I use resco to modify the register but every time i do a softreset it returns all as default... So at last i can`t get the GPS ICON
Click to expand...
Click to collapse
JUST TRY IT A SECOND TIME, I HAD THE SAME PROBLEM,
IS THERE A WAY TO TURN GPS OFF. I LIKE TO USE THE BLUETHOOT UNIT
BrigateGB said:
I use resco to modify the register but every time i do a softreset it returns all as default... So at last i can`t get the GPS ICON
Click to expand...
Click to collapse
Don't soft reset the phone, power off and on after by pressing the power button on the side until a question shows in the screen.
I found a programm for Trinity it´s Trinity Hacks and it do this.... So thx for the trick
No attempts to claim credit for inventing this process (the PTT fix is in the Wiki, and the Cyberon bit has been around since the Wizard days), but this could be the first time it's been completely posted in one place.
Cheers!
-------------------
Step 1. Disable Cyberon
- Delete SDDaemon.lnk in \Windows\Startup
- Delete the Voice Dialer shortcut from \Windows\Start Menu\Programs (or whatever submenu folder it might be in)
[NOTE: if you don't delete the shortcut and accidentally click it (or launch the program directly from File Explorer), you may have to repeat the ENTIRE procedure]
- In each of these registry locations:
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Main_ContextMenu
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Main_Tools
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Summary_Tools
----> Remove this key entirely: {2C0E9904-F32D-4f53-875F-479F5CA81E18}
- In this registry location: HKEY_LOCAL_MACHINE \ ControlPanel
----> Remove this key entirely: VoiceTagCPL
Step 2. Disable PTT and Enable PTT Button
----> Remove this key entirely: HKEY_LOCAL_MACHINE \ Services \ PTT
From HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Keys
- Add a new key called "40C6"
- Add a string under the key called "Name" with the value "Button 6"
- Add a new key called "40C7"
- Add a string under this key called "Name" with the value "Button 6 (hold)"
Step 3. Install MSVC 1.6
- Be sure to use the latest build, which can be found at http://www.sendspace.com/file/f48smf
< File Name: MSVC_US_PPC 1.6.17913.CAB Size: 3MB >
NOTE: this is licensed software; you should only download this update if you already have a licensed copy of MSVC 1.6
Step 4. Remap MSVC to PTT button (optional)
Step 5. Pair your headset
You should now be able to initiate MSVC from your BT headset and receive prompts thru its speaker. Finally, I can leave my phone in the case when I want to!
Enjoy!
BT button VC1.6 Activation
I have a HTC branded TytnII and there is no PPT reg entry. Also the keys
From HKLM\Software\Microsoft\Shell\Keys
- Add a new key called "40C6"
- Add a string under the key called "Name" with the value "Button 6"
- Add a new key called "40C7"
- Add a string under this key called "Name" with the value "Button 6 (hold)"
already exist. So..
this didnt work for me. If i push the button on my BT headset it redials the last number.
Button 6 is the Voice command button near the wheel so i cant see how the BT headset button is going to work??
any help would be great as this is then only function missing from a great device.
cheers
Should have mentioned that this has been tested by me only on a Tilt with AT&T stock ROM...
You shouldn't have to worry about the PTT-related steps on a TyTN II (nothing there to disable).
goestoeleven said:
Step 1. Disable Cyberon
[/B]- Delete SDDaemon.lnk in both \Windows\Start Menu and \Windows\Startup
- In these registry locations:
----> Remove this key entirely: {2C0E9904-F32D-4f53-875F-479F5CA81E18}
Click to expand...
Click to collapse
So this seems to be a very straight forward process, easily followed by anyone that has any right to be mucking about in a registry. However, ()SDDaemon.lnk does not exist in \Window\Start Menu it does exist in \Windows\Startup
Also, Remove this key entirely... Where the hell is it?
All other steps work fine..
Russ741
well sort off...
The PTT is now maped to VC, very cool works good.
However VC is still not working properly, I can issue commands, (dial, call, time, etc) but the system will not announce calls or appointments. I used the same CAB I have used on previous installs that worked fine before.
Any ideas anyone?
Russ741
the fix
If anyone else is having issues with call announcements look here for the fix.
http://forum.xda-developers.com/showthread.php?t=333260
Mine is now 100% and I can go back to my real job!
Russ741
Griffy wiffy said:
I have a HTC branded TytnII and there is no PPT reg entry. Also the keys
From HKLM\Software\Microsoft\Shell\Keys
- Add a new key called "40C6"
- Add a string under the key called "Name" with the value "Button 6"
- Add a new key called "40C7"
- Add a string under this key called "Name" with the value "Button 6 (hold)"
already exist. So..
this didnt work for me. If i push the button on my BT headset it redials the last number.
Button 6 is the Voice command button near the wheel so i cant see how the BT headset button is going to work??
any help would be great as this is then only function missing from a great device.
cheers
Click to expand...
Click to collapse
I use a plantronic BT head set. To use VC on the tilt I hold the main button down on the head set until I hear the VC chime in. Takes about 4-5 of holding it down until VC kicks in. I hear about 3 or beeps during that time.
Russ741 said:
If anyone else is having issues with call announcements look here for the fix.
http://forum.xda-developers.com/showthread.php?t=333260
Mine is now 100% and I can go back to my real job!
Russ741
Click to expand...
Click to collapse
I can confirm that with the procedure in #1, along with the update CAB from the above link, I'm now getting incoming calls announced, too!
Procedure in #1 has been updated accordingly.
goestoeleven said:
I can confirm that with the procedure in #1, along with the update CAB from the above link, I'm now getting incoming calls announced, too!
Procedure in #1 has been updated accordingly.
Click to expand...
Click to collapse
@goestoeleven: did you not put in the registry change?
4. Lastly, you must modify this registry entry in order to use your Bluetooth headset with Voice Command:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand Path = "\Program Files\Voice Command\VoiceCmd.exe
That's from your posting and I am pretty sure that is what really fixed my issue. I was using the older ver of MSVC with my wizard and it worked fine. So, unless there is something really different about the OS build on the Tilt, updating the MSVC may have improved on things but I still believe this reg key is what did it.
BTW: I loaded the updated MSVC before I tried the reg change and this ver of MSVC does NOT make that change for you!
I recommend you update post1 to include this step.
Great job on finding that key by the way! THANKS!!!!!!
Russ741
Russ741 said:
@goestoeleven: did you not put in the registry change?
4. Lastly, you must modify this registry entry in order to use your Bluetooth headset with Voice Command:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand Path = "\Program Files\Voice Command\VoiceCmd.exe
Click to expand...
Click to collapse
This key is not necessary with MSVC 1.6 (it was with MSVC 1.5). I'm running just fine without it.
i still can not initiate voice command from my headset. everything else works fine. i hear announcements, i can answer and hang up phone calls (the voice quality is still horrible), i get reminders, etc. but when i press the button to activate, it just opens the phone app.
is there something missing?
goestoeleven said:
This key is not necessary with MSVC 1.6 (it was with MSVC 1.5). I'm running just fine without it.
Click to expand...
Click to collapse
Interesting, I tried a couple different copies of MSVC 1.6, including the CAB I used on my Wizard and didn't get announcements. It wasn't until I loaded the latest ver and put in the reg patch did it start working 100%. I admit I didn't test between the latest ver and the reg change (yeah I know I should have) so I can't say for sure which one did it.
Russ741
diar said:
i still can not initiate voice command from my headset. everything else works fine. i hear announcements, i can answer and hang up phone calls (the voice quality is still horrible), i get reminders, etc. but when i press the button to activate, it just opens the phone app.
is there something missing?
Click to expand...
Click to collapse
That's very odd, normally the part that fails (for me at least) is the announcements or ring tone to the BT.
Can you initiate calls from the MSVC mapped key on the phone? That will narrow down if the prob is with the BT, MSVC or the phone itself.
Russ741
yes...i push PTT and VC functions just fine. i'll try that final reg change again and i'll soft reset and see what happens.
EDIT: i still can't initiate calls from the headset, however, this change does seem to have solved the low volume problem for me. just got a call, i heard the caller loud and clear and they heard me no problem.
so one problem down, one to go.
M$ VC still not working properly
I followed step in posting 1 to the letter and everything worked perfectly including caller ID voice announcement over bluetooth. But,when I soft reset or turn my phone off, I do not get voice announcement over bluetooth anymore. HELP!
Thanks! I like this concept ... I'll try it on my AT&T Tilt Rom.
Inconsistent results on various BT devices
Works great on my Jabra BT500.
On my Parrot CK3100 I get the "button only works once" behavior described in another thread - everything is great the first time I initiate VC from the car kit, but after that the phone's speaker and microphone are the only things active.
Next time the phone and car kit connect I get one more button push that works.
Argh. I'll search that other thread again, but I don't recall a fix for the folks that had these probs w/their headsets. (Any pointers are of course welcomed!)
Richard
Thanks a lot. This worked perfect for me. I am using an AT&T Tilt with helmi_c's Kaiser AKU.0.7.0 Cooked ROM and a Plantronics Discovery 655 headset.
VC with wired headset
I have a wired headset (HTC brand) and installed Voice Command, but cant get it to work from the headset button...does anyone know how I can activate from the button on headset?
i guess its safe to say you went into MSVC SETTINGS AND CHANGED the settings to wired headset? there has never been an issue with wired headsets just BT
i friend of mine told me, the f**king fm-radio isn`t loud enough.
i remembered me, that i saw a reg key ("Volume"=dword:0000a8fc)
-----start of fmradiovolumehack.reg---------
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\HTC\FMRadio\FMPlayer]
"Band"=dword:00000000
"SupportWheel"=dword:00000001
"Volume"=dword:0000ffff
-----end of fmradiovolumehack.reg--------
Supportwheel to enable the yogdial
Band for switching frequencies, japan (1), europe(0)
for german diamond users, change band to japan to hear
POLICE, FIRE DEPARTMENTS, AMBULANCE
is there no function available in your fm-radio version,
change "Band"=dword:00000000 to "Band"=dword:00000001
scan 85-88 Mhz, and enjoy
listening to police radio is not illigal in germany!
to present it or to talk it to other people is illegal!
i had some ideas to enhance the radio application with a signal (or noise) level controlled muting function, to increase the feeling while listening
(hearing without headache ) and some other police radio related ideas.
http://forum.xda-developers.com/showthread.php?t=407617
have phun!
DOMin8or aka DERd!rk
Unfortunately I cannot change the Volume Setting. My dword is 43260, and I changed to 53260, and 33260, and 0, but the Volume does not change. A Volume"=dword:0000ffff I cannot set. Any solutions? Thanks...
i`ve not testet it by my own. but he says, it works.
he changed the parameter with pocket controllers registryeditor
on the fly. i will verify it immediatly.
edited
---test---
first test, i changed to FFFF, after starting, stopping fmradio, i have taken a look
into my registry, now its F168. now i try to set to FFFFF. the change to
FFFF was not noticeable louder.
changes to FFFFF will take no effect. after closing application, the registry contains $F168
(the limit???)
okay, forget it. i`ve set it to 0200,, very quiet. but no changes. volume is the same.
i will kick this threat in 20 minutes. its useless.
the radio doesnt runs the normal signalpath, like other applications.
audioverbesserung (htc eqalizer) cant take tone control of fm-radio nf signal.
(to enhance the volume)
i can`t find the kill threat function from the forum.
no otpions, under edit post/advanced otpions.
how can i kill this threat?
Did anyone find a way to increase the lower fm radio volume level?
I have the Fuze. Has there been a fix for the following issue?
If you enable "announce incoming caller" my phone will say the name if it's in my address book, or the number. When I answer the phone via BT headset, I cannot hear the caller, but the caller can hear me. If I transfer to my phone, I can now hear the caller. If I turn off the announce, then everything is working again.
Just a heads up, my phone when I first got it, would work fine, then it stopped announcing the caller. All you would hear is a "beep" in the headset. Then I was shown a regedit that got the voice to com back, but can't hear the caller.
I know this was a ongoing issue months ago, but was there ever a solve for this?
Oh my Fuze is stock.
ms voicecommand version: 1.6.19971
rom version: 1.95.502.5 wwe
rom date:10/20/08
proto version:52.39c.25.22h
@starstreak:
I'm latching on some additional URL's to help us troubleshoot the issue.
MS Voice Command on the Fuze
http://forum.xda-developers.com/showthread.php?t=445204
The Definitive Guide to Microsoft Voice Command (MSVC) 2.1
http://www.winmo-experts.com/viewtopic.php?f=11&t=2
Da_G's Simple ROM Kitchen Solutions (Fixes)
http://forum.xda-developers.com/showpost.php?p=3467110&postcount=503
http://forum.xda-developers.com/showpost.php?p=3462813&postcount=489
http://forum.xda-developers.com/showpost.php?p=3592035&postcount=644
Da_G's Simple ROM Kitchen Reports
http://forum.xda-developers.com/showpost.php?p=3455841&postcount=470
http://forum.xda-developers.com/showpost.php?p=3457239&postcount=471
http://forum.xda-developers.com/showpost.php?p=3460626&postcount=480
http://forum.xda-developers.com/showpost.php?p=3460665&postcount=481
http://forum.xda-developers.com/showpost.php?p=3460972&postcount=483
http://forum.xda-developers.com/showpost.php?p=3462787&postcount=488
http://forum.xda-developers.com/showpost.php?p=3617314&postcount=709
Few questions:
1) What file is the BT Audio Gateway pointing to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
BTAGExtModule =
2) Is there a BT Headset Call Announce key, what are the values:
HKCU\ControlPanel\Sounds\InCallPoliteBeep
3) Is there a Call Announce key, what are the values:
HKCU\ControlPanel\Sounds\TTSAnnounce
1) What file is the BT Audio Gateway pointing to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
BTAGExtModule = oemagw.dll
2) Is there a BT Headset Call Announce key, what are the values:
HKCU\ControlPanel\Sounds\InCallPoliteBeep
catagory incall
script as5p
sound application data\volatile\\ttscallerid.exe
3) Is there a Call Announce key, what are the values:
HKCU\ControlPanel\Sounds\TTSAnnounce
catagory voicecommand1
script as5p
sound application data\volatile\\ttscallerid
That happened to me with the stock 6.1 & MSVC, but, since I flashed to RRE's 6.5 V4, which uses MSVC 1.6.21234, that problem disappeared.
It would do the same thing yours did, you'd answer your BT, they could hear you but you couldn't hear them. I tried it with several different BT headsets, made no difference.
@p51d007:
If you can spare a moment, would it be possible for you to post up the registry for the BT Audio Gateway?
@startstreak:
Those registry entries don't look right (ex: point to ttscallerid.exe, extra back slashes, etc). Here are my entries:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
REG_SZ: BTAGExtModule = \windows\VCBTHAG.DLL
[HKEY_CURRENT_USER\ControlPanel\Sounds\InCallPoliteBeep]
REG_SZ: Script = as5p
REG_SZ: Category = InCall
REG_SZ: Sound = \Application Data\Volatile\TTSCallerID.wav
[HKEY_CURRENT_USER\ControlPanel\Sounds\TTSAnnounce]
REG_SZ: Script = as5p
REG_SZ: Category = VoiceCommand1
REG_SZ: Sound = \Application Data\Volatile\TTSCallerID.wav
Cheers,
hilaireg- I remember where those extra "//" came from. It was from another regedit that was on this board.
I redid your settings on mine. Wow. I can now hear my caller. I tried it around 8 times with different phones. 2 times, my phone vibrated (I have it set to vibrate&ring at the same time) but nothing sounded on my headset untill the phone killed the call to goto voicemail. At that split second, I heard my ring tone in my ear for like less than a second. So I'm not sure if that is a new issue.
I am happy for your help. Since I got the fuze when it first came out, I never had my MSVC working this well. Thanks!
I'll post ONLY the ones that vary from yours...
Hope this helps.
[HKEY_CURRENT_USER\ControlPanel\Sounds\InCallPoliteBeep]
REG_SZ: Script = p <<<<<THIS IS DIFFERENT
REG_SZ: Sound = Alarm1.wma <<<<THIS IS DIFFERENT
[HKEY_CURRENT_USER\ControlPanel\Sounds\TTSAnnounce]
REG_SZ: Category = InCall2 <<<<<THIS IS DIFFERENT
hilaireg said:
@p51d007:
If you can spare a moment, would it be possible for you to post up the registry for the BT Audio Gateway?
@startstreak:
Those registry entries don't look right (ex: point to ttscallerid.exe, extra back slashes, etc). Here are my entries:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
REG_SZ: BTAGExtModule = \windows\VCBTHAG.DLL
[HKEY_CURRENT_USER\ControlPanel\Sounds\InCallPoliteBeep]
REG_SZ: Script = as5p
REG_SZ: Category = InCall
REG_SZ: Sound = \Application Data\Volatile\TTSCallerID.wav
[HKEY_CURRENT_USER\ControlPanel\Sounds\TTSAnnounce]
REG_SZ: Script = as5p
REG_SZ: Category = VoiceCommand1
REG_SZ: Sound = \Application Data\Volatile\TTSCallerID.wav
Cheers,
Click to expand...
Click to collapse
starstreak said:
hilaireg- I remember where those extra "//" came from. It was from another regedit that was on this board.
I redid your settings on mine. Wow. I can now hear my caller. I tried it around 8 times with different phones. 2 times, my phone vibrated (I have it set to vibrate&ring at the same time) but nothing sounded on my headset untill the phone killed the call to goto voicemail. At that split second, I heard my ring tone in my ear for like less than a second. So I'm not sure if that is a new issue.
I am happy for your help. Since I got the fuze when it first came out, I never had my MSVC working this well. Thanks!
Click to expand...
Click to collapse
As I see it, you have a few options:
1) Continue to debug the issues
I've a feeling that the MSVC install on the ROM has been messed up. I'm not sure if it's only the registry part or if some of the exe/dll are impacted as well. If it turns out exe/dll's are also a problem, we will quickly run out of options.
In the interim, I can post up the MSVC registry file so that you can compare the settings against those in your device registry.
2) Follow p51d007's recommendation
IMHO, I recommend this approach. Drop the ROM you are using and flash a working ROM.
Alternatively, make an inventory of the applications on your device, and then look at the 6.1 Kitchen in the Raphael ROM Development thread - there's text files listing the applications in the kitchen/pack. Compare it against your list to make sure that all the applications you use/have are present and cook your own ... provides *way* more control.
* EDIT *
Posted registry and post-MSVC configuration.
I was thinking about upgrading to 6.5 if it was stable. If I had to cook.
I wouldn't call it an upgrade; it's still pretty much unreleased code.
That said, Da_G (and others) have done a fantastic job with the 6.5 code they've managed to locate.
If you need to rely on device functionality, you may want to look trying a 6.1 ROM - or cooking your own. That way, you can try WinMO 6.5 on the weekends ...
Text Messages
Voice Command on my tilt read messages and I could hear them. I realize the Fuze has had issues with Voice Command. Has anyone gotten this feature to work? Saved time from having to pick device up from desk.
try flashing back to stock and then going back to a ROM. Try out NRGZ28's Energy ROM. Working great very little bugs. on an older version but i'm sure the new one is just as stable.
It Works...
If you go to the voice command icon in settings, highlight messaging (don't just put the check mark in the box, highlight the word messaging) then push the options button. You will go to the Voice Cammand: Messaging Options and take the check out of the High priority messages only box. This should work. I have had Energy Roms anda few others, like right now I have RRE's and my messages read after doing this. Everytime I flash a new rom I have to go and do this. But it works afterwards.
Muchas Gracias
I did as you suggested, unchecked High priority massages only. Works like a charm, thanx