its slow, slugish and for some reson on 3G it loads up half of the page then freeze and on E its slowww.
why? do i do some worng?
same for me, looking for a solution, too. in the meantime i use opera mini, which is unbelieve fast!
I start not to like Kaiser rom.
wm6 on my 8525 was blazing fast.Kaiser its like old women.
please .......guys......... new rom we need it.
If you did a registry hack to move to the storage card, it may cause problems.
had the same problem. use advanced configuration tool go to internet explorer tab tick disable internet files cache. reset. no freezes for me after that.
herzel said:
its slow, slugish and for some reson on 3G it loads up half of the page then freeze and on E its slowww.
why? do i do some worng?
Click to expand...
Click to collapse
LuXx said:
had the same problem. use advanced configuration tool go to internet explorer tab tick disable internet files cache. reset. no freezes for me after that.
Click to expand...
Click to collapse
Found the tool you were referring to, but my freezes still occur.
http://forum.xda-developers.com/showpost.php?p=1539222&postcount=2
tylr said:
Sorry... what tool are you using to make the chage?
Click to expand...
Click to collapse
tylr said:
Found the tool you were referring to, but my freezes still occur.
Click to expand...
Click to collapse
The same with me :-((
Opera 8.65 without Problems
After I updated to 6.1 I also have the same problem - IE will open a page to some amount (like 4KB for Live Search download page) and then the whole device freezes.
Have any of you who have this issue ever tweaked the IE settings so that IE temp files go to storage card instead of main memory? This is usually done with Tweaks2k2 or TweakKaiser, or one of those apps.
Disable the proxy and shift the cache to your main memory rather than the storage card.
smittyofdhs said:
Have any of you who have this issue ever tweaked the IE settings so that IE temp files go to storage card instead of main memory? This is usually done with Tweaks2k2 or TweakKaiser, or one of those apps.
Click to expand...
Click to collapse
Yes. I came to that idea too. I had previously set the temp files to be stored on Storage card. I did a hard reset (this was not the only reason) and after that IE works again.
So don't change the location settings of IE!!!
Related
I can't figure out why PocketIE isn't loading up pages while in WiFi Connection.. i could only load up pages from BBConnect, WiFi doesn't seem to be loading up at all :S.
It wouldn't do much. It would only show the status bar up, says loading 0KB and disappear.
Is there a setting mistake I made?
E-Mail seem to work fine, it's just PocketIE that's not working.
Did you put the PIE cache to your storage card? If yes, this is your problem.
Sane said:
Did you put the PIE cache to your storage card? If yes, this is your problem.
Click to expand...
Click to collapse
Well, I don't know what I did anymore, but I reinstalled everything. Seems to work fine for now.
After being prompted with
"The internet connection is currently in use by the Blackberry browser. Would you like to temporarily disable BlackBerry browsing?"
[yes'> [no'>
I went to restart my device (TyTN II, running clean ROM, factory default) because an installer wanted me to. I wasn't sure which option it chose, but it seems like it's on NO (since it has this thicker black border than YES).
After I booted back on, I can't browse the web using PocketIE any longer. It would show up the progress bar for a split second, but nothing actually loads.
Anyone with a possible idea/solution?
I am having this same problem. What setup are you all running. I have the junk free ATT rom with HSPDA enabled.
theflash42 said:
I am having this same problem. What setup are you all running. I have the junk free ATT rom with HSPDA enabled.
Click to expand...
Click to collapse
Define "setup".
I still receive emails from my BBConnect and such.
theflash42 said:
I am having this same problem. What setup are you all running. I have the junk free ATT rom with HSPDA enabled.
Click to expand...
Click to collapse
Thanks to Sems, of www.sems.org, he provided me with a solution!
Simply disable the proxy in IE or use Blackberry Browser link.
It is in the same post of your last comment:
""You can modify the registry key 'EnableAutoDetect' key found in the registry location:
[hkey_current_user\software\microsoft\windows\curre ntversion\internet settings'>
The default setting (that uses the proxy) is:
"EnableAutoDetect"=dword:00000000
(To disable proxy) Change it to:
"EnableAutoDetect"=dword:00000001
The best option is to delete the registry key (which I did) since some posts indicate this registry option gets set to 0 after a reset."
-----Original Message-----
Click to expand...
Click to collapse
THANKS SEMS!
Hey everyone I am just looking for a solution on how to clear up some storage memory on my att tilt. It has a full stock shipped rom installed. I don't have too many aftermarket programs installed either and if anything I have most programs installed on my 4gb Card. I keep getting the low storage memory message on my phone and I can't even send new mms messages or read new ones. Out of the alloted 125 mb free storage ram I am running less then 1mb free memory. Program memory however is fine.
Do you guys have any solutions to clearing up some storage memory other then removing the Att bloatware. What is the primary cause of low storage memory? Right now I have about 2+gb's on my storage card and I would like to use that to save my files if that is an option.
Please advise.
Thanks
try clearing your internet explorer cache. This is done by opening IE, and go to Menu > Tools > options and pick the memory tab. tap the Delete Files button, and see what that does for you.
I did that and it cleared up over 40MB of memory. I use Opera exclusively now just because of that. I wish someone would fix the issue of not being able to redirect IE's cache to the SD card.
snooginsguy said:
try clearing your internet explorer cache. This is done by opening IE, and go to Menu > Tools > options and pick the memory tab. tap the Delete Files button, and see what that does for you.
Click to expand...
Click to collapse
Damn that was a great fix man. I just cleared out 60mb's of storage. Thats crazy. Any other pointers?
Internet cache path can be changed using schap's advanced configuration tools, stickied in the 'development and hacking' in the general section.
Y'all should read posts in general too, since there is alot of information that is not Kaiser specific...
Hope this helps.
Look at this recent thread. http://forum.xda-developers.com/showthread.php?t=349683
Hope it helps.
_Alex_ said:
Internet cache path can be changed using schap's advanced configuration tools, stickied in the 'development and hacking' in the general section.
Y'all should read posts in general too, since there is alot of information that is not Kaiser specific...
Hope this helps.
Click to expand...
Click to collapse
I am aware of that program, but it is a known issue with the Kaiser that PIE will hang if the temp files are redirected to your storage card.
....unless it's been fixed and I missed it.
Lidberg said:
I am aware of that program, but it is a known issue with the Kaiser that PIE will hang if the temp files are redirected to your storage card.
....unless it's been fixed and I missed it.
Click to expand...
Click to collapse
Nope, I haven't heard about a fix either, although I haven't encountered it personally with my TomTom maps on my storage card. I never thought about this before, but perhaps me having a class 6 helps? dunno.
I just got a Tilt and am running Alex's stripped ROM. I'm used to storing the Temporary Internet Files, History, and Cookies on the Storage Card with my Hermes.
I've Google Searched this and cannot find it.
I've tried to make the registry changes as follows:
HLCU\Software\Microsoft\Windows\Current Version\Explorer\Shell Folders
Cache = \Storage Card\Temporary Internet Files
Cookies = \Storage Card\Cookies
History = \Storage Card\History
When I do this and reset the device, PIE won't work. It starts to down load files then just starts.
How are you Kaiser Aces doing this.
Thanks in advance.
I haven't tried this myself but I know KaiserTweak has options to change where your files are stored. Give that a whirl.
Unless you want a dead slow internet experience, don't do it. the only reliable place to move the cache to on these devices is a ram disc. But that's a bit of a waste on your ram & not needed. As long as you clean up your temp. iternet files occasionaly you'll be fine in device memory. As far as I know though, there is no reliable way to relocate the cache to SD at this time.
GS Leon 3
Thanks man. I do it on my BA and Hermes with no problem. I'll follow your advice.
Yeah, I n BA also. This is a different beast though.
No storage card for IE files..... SSLLLLLOOOOWWWW and/or DIE. Unfortunately, it is no good.
I've set IE cache to storage card and must confirm that IE becomes very slow and hangs so now and then.
GSLEON3 said:
Unless you want a dead slow internet experience, don't do it. the only reliable place to move the cache to on these devices is a ram disc. But that's a bit of a waste on your ram & not needed. As long as you clean up your temp. iternet files occasionaly you'll be fine in device memory. As far as I know though, there is no reliable way to relocate the cache to SD at this time.
Click to expand...
Click to collapse
sorry for the thread revival, but by "cleaning out" temp files, do you mean just deleting everything under:
\Windows\profiles\guest\Temporary Internet Files\Content.IE5\*
?
I've got 37.9 MB in mine.
simplified. using your browser, go in to settings and delete cookies, cache and temp. internet files.
or you can use the cleartemp program and do it that way.
P1Tater said:
simplified. using your browser, go in to settings and delete cookies, cache and temp. internet files.
or you can use the cleartemp program and do it that way.
Click to expand...
Click to collapse
I did that (cleared cookies/cache/temp files in browser), it didn't remove any of the files in that directory.
so...
- did a soft reset
- renamed my \Content.IE5\ folder to \Content.IE5.OLD\
- did another soft reset
- opened PIE and browsed
- checked that a new \Content.IE5\ folder had been created
- deleted the \Content.IE5.OLD\ one
38MB recovered.
Just deleted 2 Posts as they were adding no value unless we are in a kindergarten.
Thanks for the thread, I just recovered 64mb
Hello everyone,
Does anyone know if there will be any way that we can use IGO8 on the Diamond?
I know that for them moment that is a no-no since there is an absence for a SD card, but is there a way that there will be a way around it ???maybe with the modification of the SYS.txt file?
Thanks
athosk said:
Hello everyone,
Does anyone know if there will be any way that we can use IGO8 on the Diamond?
I know that for them moment that is a no-no since there is an absence for a SD card, but is there a way that there will be a way around it ???maybe with the modification of the SYS.txt file?
Thanks
Click to expand...
Click to collapse
the internal 4GB memory in the Diamond is identified as a "Storage Device" so it shouldnt be a problem.
IGO 8 crash with Diamond...Look HERE
How did he test it?
You can run iGo8 only from the original SD-card (copy protection)!!!
It is not possible to copy the files an run it from another SD-Card.
So it will not be possible to use it on the diamond.
TDO
TDO said:
How did he test it?
You can run iGo8 only from the original SD-card (copy protection)!!!
It is not possible to copy the files an run it from another SD-Card.
So it will not be possible to use it on the diamond.
TDO
Click to expand...
Click to collapse
he tested it with cracked igo 8... so it is possible!
I had problems with iGO8 on my P3650 Touch Cruise and i found out that if you disable "Assisted GPS" it will work. I used Pocket Toolman to disable that. I did deleted those two files in the "2577" folder and made myself an shortcut that i placed in \Windows\Start Menu folder. Now it works like a charm. When you don't disable Assisted GPS it crashes all the time. Hope this will help.
You didn't read carefully ... :
MartinMystere said:
Hi Guys,
IGO 2008 crashes (it does not start up - AGPS is zerp by default enabling did not help either)
BR
Click to expand...
Click to collapse
I think discussion about illegal software is not really purposeful.
The original poster asked if he will be able to use iGo8 with the diamond.
And the answer is a simple no, as it only works with the included SD-card.
TDO
TDO said:
I think discussion about illegal software is not really purposeful.
The original poster asked if he will be able to use iGo8 with the diamond.
And the answer is a simple no, as it only works with the included SD-card.
TDO
Click to expand...
Click to collapse
It will work if you place it in the 4 gig space, make a shortcut of iGO.exe in \windows\Start Menu and it will start up and work just fine.
Sponzert said:
It will work if you place it in the 4 gig space, make a shortcut of iGO.exe in \windows\Start Menu and it will start up and work just fine.
Click to expand...
Click to collapse
No it will not.
It works only with the SD-Card it came.
iGo8 hast the same copy protection as iGo6 - the program ist bound to the specific SD-card.
Just ask navngo.
TDO
This is actually ridiculous: I get a GPS phone and can't install ANY GPS program on it? As far as I know, they all come on SD cards!
pedmond said:
This is actually ridiculous: I get a GPS phone and can't install ANY GPS program on it? As far as I know, they all come on SD cards!
Click to expand...
Click to collapse
its not the hardware manufactor's fault that the software developer cannot write a piece of software to function without a microSD card.
Sponzert said:
I had problems with iGO8 on my P3650 Touch Cruise and i found out that if you disable "Assisted GPS" it will work. I used Pocket Toolman to disable that. I did deleted those two files in the "2577" folder and made myself an shortcut that i placed in \Windows\Start Menu folder. Now it works like a charm. When you don't disable Assisted GPS it crashes all the time. Hope this will help.
Click to expand...
Click to collapse
What did you mean by crashes? I have a touch diamond and i have tried to install a version on my device.
What I have done is placed the two folders iGO8 and 2577 folders into the inboard storage of my phone I have then unplugged the phone from the data cable and it then asks me if i want to install iGO, i click yes and it installs, through the instalation, it asks me a unknown publisher wants to acces something, i just click yes, the installation ends up finishing and the program tries to load, then bang nothing, it just goes to the menu screen i was previously on, I then try to access the program through the start menu and programs folder, it tries to execute but then just stops. nothing happens. I have also tried the same thing after a soft reset.
is nthis the kind of issue you were having ?
saveferris said:
What did you mean by crashes? I have a touch diamond and i have tried to install a version on my device.
What I have done is placed the two folders iGO8 and 2577 folders into the inboard storage of my phone I have then unplugged the phone from the data cable and it then asks me if i want to install iGO, i click yes and it installs, through the instalation, it asks me a unknown publisher wants to acces something, i just click yes, the installation ends up finishing and the program tries to load, then bang nothing, it just goes to the menu screen i was previously on, I then try to access the program through the start menu and programs folder, it tries to execute but then just stops. nothing happens. I have also tried the same thing after a soft reset.
is nthis the kind of issue you were having ?
Click to expand...
Click to collapse
why don't you try running it by disabling A-GPS using PPC Toolman? The other member claims that with this way, he got it to run using another device though
athosk said:
why don't you try running it by disabling A-GPS using PPC Toolman? The other member claims that with this way, he got it to run using another device though
Click to expand...
Click to collapse
Exactly, thats what i did and it runs like hell. Sometimes you can go mad when you reboot and get that install again, just delete the two files from 2577 folder.
pedmond said:
This is actually ridiculous: I get a GPS phone and can't install ANY GPS program on it? As far as I know, they all come on SD cards!
Click to expand...
Click to collapse
Yes, but only navngo uses the SD card ID as copy protection. All other progams should function. E.g. TomTom will be included on the O2 version of the diamond.
TDO
athosk said:
why don't you try running it by disabling A-GPS using PPC Toolman? The other member claims that with this way, he got it to run using another device though
Click to expand...
Click to collapse
I couldn't even install that program PPC toolman, i downloaded the link on that page, I put the files on my internal storage and clicked on them through file manager, it just gave me an error message.
I even put the files in My device section of my hard drive and still nothing.
TBH, i have NFI what i'm gonna do next.
walshieau said:
its not the hardware manufactor's fault that the software developer cannot write a piece of software to function without a microSD card.
Click to expand...
Click to collapse
I totally agree - that was meant as a critique for the software houses. I'm buying the Diamond
saveferris said:
I couldn't even install that program PPC toolman, i downloaded the link on that page, I put the files on my internal storage and clicked on them through file manager, it just gave me an error message.
I even put the files in My device section of my hard drive and still nothing.
TBH, i have NFI what i'm gonna do next.
Click to expand...
Click to collapse
I have sent you a private message. Check that out and let us know the result. I don't have a Diamond but I got iGO8 working on a device with the SD card removed, so it should work on the Diamond as well...
david-v said:
I have sent you a private message. Check that out and let us know the result. I don't have a Diamond but I got iGO8 working on a device with the SD card removed, so it should work on the Diamond as well...
Click to expand...
Click to collapse
Can you please send me the info about IGO8 as well? I have the Diamond and will test it tomorrow. Thx
Hello,
I'm still working on the different sound topics, but here are my newest roms.
I call them age of reason and age of beauty. This is a kind of trial for the second one...
The point is that we need a rom to really use the shift possibility. We need storage space, real gps useage, and of course maximum ram.
This is the age of reason rom. The lightest possible rom, where you can add a lot of programs, more if you use UPX compression.
You need to flash the radio from the phone+gps rom before using this one.
What does it have:
42 Mb storage and 22 Mb memory free
WORK on WINMOB SIDE
All standard Winmob application (ie, notes, media player, sms, phone, gps)
Task manager to soft reset, kill process, etc...
Clear temp (as requested)
USB tools
A homemade program to switch the speaker when on call. This program is for my development my roms only, and it work as a service, so it cannot be killed by the OS.
There is a managment program to remove the service if needed.
WORK WITH VISTA
storage:
A network browser to access the vista HDD
GPS:
An automatic GPS redirection to the PC side
This program is GPS2Blue, and it is preconfigured. You just have to launch the shortcut in HTC debug tools, and setup vista to get communication.
GPS works on both side, so you can use it on Windows mobile too of course
A few words on this last program.
GPS2Blue is a program made by Paludour. You can check his website here:
http://www.paludour.net
He allowed me to add this program to my roms, as you must normally download the cab from his site. This way, I could put it preconfigured on our devices. Many thanks to him for that.
When you are connected with usbtools to vista, click on this gps2blue icon, and you can receve the gps on vista if you follow this guideline:
http://www.paludour.net/GPS2BlueFAQ.html#USB
Just click on the gps2blue icon when you have to do the PDA side of this tutorial, the rest is aleady done.
The link for this rom is here:
http://www.mediafire.com/file/jjjm0ydmmz5/Light.rar
MD5: 4c31ba01b109e22cd77bc3da53220672
Mirror:http://www.filesavr.com/light_1
Now for the other rom, the age of beauty:
This rom is the same, with one little twist: there is pointUI pre-installed.
This is a test, as I don't know if this is a good way instead of installing it afterward. Anyway, you are good for some eyecandy.
You have to pay for this: you have only 37 Mb of sorage, and 9 (yes, nine) megs of free memory after reset. But the good news is that you can disable it, and still be using the rom. So you can choose when you want eye candy, and when you want to be serious. If it is requested, I might update this one.
The link for this one is:
http://www.mediafire.com/file/3zmtnyi2mjh/Full.rar
MD5:fe2a2d6592339c29c994e4a2e6638d1e
Enjoy and report here if you like it.
How to connect to vista side:
first, know the name of your shift. If you didn't change it it is SHIFT, otherwise type hostname in a command line in vista side.
then type services.msc and make sure the server service is started and set up to automatic if you want it to start every boot
Now type \\shift in your start menu. A windows must open, and you should see thinks, like Users,and printers. If not, don't worry, you can still go on. For more advanced users, it can be a good time to set up a share.
Now go on Snapvue side, and go to settings-connections-network plugin. First click on the "enable network folder" and wait for the reset.
Now, when reset is done, start usbtools to activate activesync. On vista side, make sure you are connected ( set up a partnership, or just click on connect whitout partneship. In this case, you will have to do it each time.)
Go back on Snapvue, and in network plugin click on New...
In remote path, enter \\shift\users if shift is your computername, and if you saw Users in the window on the second step.
Otherwise, you can enter \\shift\c$ to access the whole drive.
Click on map drive. Enter your username and your password (the one you use to login in vista)
Now, you can browse the pc using the network folder. You can add music to media player, browse pictures, wmv video...
You can even install some progs on vista side, but I don't recommend it. You might use it also as a data storage for SPB insight (my little baby) for example
thank you.
thaihugo said:
----RESERVED------------
Click to expand...
Click to collapse
PointUI 2 is good, but I liked PointUI1.5 better. If they could let us choose the search provider that would be awesome.
--Rama--
Thanks ThaiHugo !
Flashing the rom at this very moment. PointUI
Has this ROM a higher mic gain setting as the default, i.e. is the microphone
issue solved (low sound recording volume) ?
Will report in this post later on.
----
The ROM looks and feels supersweet. However, if you work with it
for some time it get's laggy. No harm, we all understand it's a test.
Will play with the GPS2Blue thing to get that fixed too.
lucid said:
Thanks ThaiHugo !
Flashing the rom at this very moment. PointUI
Has this ROM a higher mic gain setting as the default, i.e. is the microphone
issue solved (low sound recording volume) ?
Will report in this post later on.
Click to expand...
Click to collapse
No, but I think this is going to be solved without flashing a new rom
Thanks ThaiHugo.
I preferred "age of beauty". How works the network browser to access the vista HDD? I am not able. If you can help me please.
Thanks Thaihugo, this rom is really good and a lot of free memory and storage for programs. Only problem is that when I have Vista side open gps isn't working for me. Well it is working (satellite used about 4-10) but Satellite Fixed stays 0. When I turn off vista side Satellite Fixed is after a few seconds 5-7.. I have Windows 7 build 7000 installed on vista side and Light version on snapvue side
JaWe said:
Thanks Thaihugo, this rom is really good and a lot of free memory and storage for programs. Only problem is that when I have Vista side open gps isn't working for me. Well it is working (satellite used about 4-10) but Satellite Fixed stays 0. When I turn off vista side Satellite Fixed is after a few seconds 5-7.. I have Windows 7 build 7000 installed on vista side and Light version on snapvue side
Click to expand...
Click to collapse
I have the same problem, but I've had this with other roms too
Thanks for this... I do not have Auto Connection
It does not seem this new beatiful ROM has auto connection, not been able to connect WM 3g or am I missing something? Thanks
feyisetan said:
It does not seem this new beatiful ROM has auto connection, not been able to connect WM 3g or am I missing something? Thanks
Click to expand...
Click to collapse
I removed automatic connection setup to save space. You need to setup your connection by yourself in settings-connections. Once done, it will connect automaticaly. Most providers can sen you a sms from their web site with connection settings.
I'm not sure you want to lose 3 megs of storage for this one time operation, do you?
Downloading the ROM
Thanks
lucid said:
Thanks ThaiHugo !
Flashing the rom at this very moment. PointUI
Has this ROM a higher mic gain setting as the default, i.e. is the microphone
issue solved (low sound recording volume) ?
Will report in this post later on.
----
The ROM looks and feels supersweet. However, if you work with it
for some time it get's laggy. No harm, we all understand it's a test.
Will play with the GPS2Blue thing to get that fixed too.
Click to expand...
Click to collapse
If you want, you can just disable the today plugin, and you get a full working wm for when you want to be serious. And you just soft reset when you are just using it as an updated snapvue.
To disale fully pointui:
delete the shortcut in \windows\startup (start2) and disable the today plugin.
To reenable, recheck the today plugin.
your rom is the best
thaihugo said:
If you want, you can just disable the today plugin, and you get a full working wm for when you want to be serious. And you just soft reset when you are just using it as an updated snapvue.
To disale fully pointui:
delete the shortcut in \windows\startup (start2) and disable the today plugin.
To reenable, recheck the today plugin.
Click to expand...
Click to collapse
Thaihugo, I love your rom very much so fast and simple,easy for install software and hope many function will be coming
added tutorial to connect the vista HDD on second post.
siriokeliang said:
Thanks ThaiHugo.
I preferred "age of beauty". How works the network browser to access the vista HDD? I am not able. If you can help me please.
Click to expand...
Click to collapse
You can read my tutorial on post 2.
thaihugo said:
You can read my tutorial on post 2.
Click to expand...
Click to collapse
I'll swear that I had not seen.
siriokeliang said:
I'll swear that I had not seen.
Click to expand...
Click to collapse
I posted it today only, after you requested it
Installed the 'light' ROM yesterday. Works great.
Thanks again
thaihugo said:
Hello,
I'm still working on the different sound topics, but here are my newest roms.
I call them age of reason and age of beauty. This is a kind of trial for the second one...
The point is that we need a rom to really use the shift possibility. We need storage space, real gps useage, and of course maximum ram.
This is the age of reason rom. The lightest possible rom, where you can add a lot of programs, more if you use UPX compression.
You need to flash the radio from the phone+gps rom before using this one.
What does it have:
42 Mb storage and 22 Mb memory free
WORK on WINMOB SIDE
All standard Winmob application (ie, notes, media player, sms, phone, gps)
Task manager to soft reset, kill process, etc...
Clear temp (as requested)
USB tools
A homemade program to switch the speaker when on call. This program is for my development my roms only, and it work as a service, so it cannot be killed by the OS.
There is a managment program to remove the service if needed.
WORK WITH VISTA
storage:
A network browser to access the vista HDD
GPS:
An automatic GPS redirection to the PC side
This program is GPS2Blue, and it is preconfigured. You just have to launch the shortcut in HTC debug tools, and setup vista to get communication.
GPS works on both side, so you can use it on Windows mobile too of course
A few words on this last program.
GPS2Blue is a program made by Paludour. You can check his website here:
http://www.paludour.net
He allowed me to add this program to my roms, as you must normally download the cab from his site. This way, I could put it preconfigured on our devices. Many thanks to him for that.
When you are connected with usbtools to vista, click on this gps2blue icon, and you can receve the gps on vista if you follow this guideline:
http://www.paludour.net/GPS2BlueFAQ.html#USB
Just click on the gps2blue icon when you have to do the PDA side of this tutorial, the rest is aleady done.
The link for this rom is here:
http://www.mediafire.com/file/jjjm0ydmmz5/Light.rar
MD5: 4c31ba01b109e22cd77bc3da53220672
Now for the other rom, the age of beauty:
This rom is the same, with one little twist: there is pointUI pre-installed.
This is a test, as I don't know if this is a good way instead of installing it afterward. Anyway, you are good for some eyecandy.
You have to pay for this: you have only 37 Mb of sorage, and 9 (yes, nine) megs of free memory after reset. But the good news is that you can disable it, and still be using the rom. So you can choose when you want eye candy, and when you want to be serious. If it is requested, I might update this one.
The link for this one is:
http://www.mediafire.com/file/3zmtnyi2mjh/Full.rar
MD5:fe2a2d6592339c29c994e4a2e6638d1e
Enjoy and report here if you like it.
Click to expand...
Click to collapse
i can't download from the above link,can you upload to other site
leonlsl said:
i can't download from the above link,can you upload to other site
Click to expand...
Click to collapse
It's pointless if you don't say which rom you want, and which site you can download from.