I've been playing with my Kaiser and these are the last remaining bugs that I can't figure out:
1. No Data while using Voice. See thread in this forum for other's complaints.
2. Phone does not wakeup when a email is received. I tried following other's advice by installing Spb time, and enabling "Wakeup Tweak" and this had no effect. Phone plays notification sound, but still is sleep.
3. Phone locks keys and sleeps while talking. On my 8125 with WM5, the phone would turn off the display, but would wake up with any key press while in the call. This is kind of handy in case I want to see another call come in, go to speaker phone, mute, etc. Right now, I need to hit the power button.
4. Menu's in messaging are really annoying. It would be wonderful if there was a way to modify the menu's in messaging. In SMS/MMS the New Menu Item is actually another menu where the first item is "Multimedia message". There are other things I find annoying.
Other than these annoyances, I think the phone is really doing great.
mswanson said:
I've been playing with my Kaiser and these are the last remaining bugs that I can't figure out:
1. No Data while using Voice. See thread in this forum for other's complaints.
You may not have 3g in your area, or your provider requires UMTS which you
can enabled by installing the Kaiser Tweak program.
2. Phone does not wakeup when a email is received. I tried following other's advice by installing Spb time, and enabling "Wakeup Tweak" and this had no effect. Phone plays notification sound, but still is sleep.
I like this effect since it doesn't waste battery. I'm not sure how to fix this one
3. Phone locks keys and sleeps while talking. On my 8125 with WM5, the phone would turn off the display, but would wake up with any key press while in the call. This is kind of handy in case I want to see another call come in, go to speaker phone, mute, etc. Right now, I need to hit the power button.
Turn off fast sleep, use kaiser tweak to disable.
4. Menu's in messaging are really annoying. It would be wonderful if there was a way to modify the menu's in messaging. In SMS/MMS the New Menu Item is actually another menu where the first item is "Multimedia message". There are other things I find annoying.
your on your own
Click to expand...
Click to collapse
1. I guess from what others are saying you have to be in the HSPDA area.
2. I guess I never realized it but mine doesn't either, be nice if it were an option but I don't know if it is.
3. These are reg settings, install the reg tweaks sticky above
4. I don't quite understand what you looking for or what is the problem.
Thanks for the reply exstatica.
I have kaiser tweak installed.
For #1, which option is this exactly, I'm not seeing what option you explain.
For #3, I have "Fast Screen Off" = Disabled (Advised)
jallenclark,
If you go into Messaging and then your Outlook E-Mail account, you will notice the Menu has "MMS Options" as the last item in the menu. On 8525, WM6, "Send/Receive" was the last option. It was nice that this was the last item. Why "MMS Option" need to be on the Email account, I have no idea.
If you go into Messaging and then you MMS/SMS account, the Menu Has a New Menu Item, then two sub-items. This isn't out it use to be.
I wish there was a way to modify these items.
I think it is near the top of the tweak program, it is called Fast Sleep.
I see what you mean about the Send/Receive and I agree completely. I am sure it would be possible to switch the order of the buttons but I don't know how to program it. I went from 8125 and it was similar to this the send/recieve was 3 up on the list.
I had 0.3 of KaiserTweak, current version 0.4 has the option you were talking about. Duh moment on my part
The Kaiser has voice and data at the same time as long as you are in a 3g area.
I can stream live TV from my media center pc using webguide4 and as long as the icon shows the "H" symbol for HSDPA then I can make and recieve calls while the video streams. The audio on the video is muted until I hang up the phone but the video is still playing non the less. If I do not have the "H" icon then this will not work.
This is not a problem with the phone it is the way the technology works. Be thankful, this is only with GSM providers. Meaning that this is not even an option with the best service area with Sprint and Verizon.
I get over 100 emails a day in my line of job, if the "feature" you describe existed (wake up on email) the first thing I'd look for is how to turn it off... My Hermes did the same BTW, you hear the sound, but the units remains in standby mode.
mswanson said:
4. Menu's in messaging are really annoying. It would be wonderful if there was a way to modify the menu's in messaging. In SMS/MMS the New Menu Item is actually another menu where the first item is "Multimedia message". There are other things I find annoying.
.
Click to expand...
Click to collapse
Not quite sure what you mean but if you are wanting a send a sms you can always set one of the softkeys to "New SMS" meaning you only need to click one button to compose a sms.
mswanson said:
I've been playing with my Kaiser and these are the last remaining bugs that I can't figure out:
3. Phone locks keys and sleeps while talking. On my 8125 with WM5, the phone would turn off the display, but would wake up with any key press while in the call. This is kind of handy in case I want to see another call come in, go to speaker phone, mute, etc. Right now, I need to hit the power button.
Other than these annoyances, I think the phone is really doing great.
Click to expand...
Click to collapse
1 click on the side wheel and it is back when you need it I love this system..
fast sleep makes my tilt (kaiser, 8925, varioIII) respond incorrectly.
fast sleep is a good idea conceptually but while it saves battery power, when i wake up my phone in call or after the call is over, It makes most of the home screen and the soft buttons unresponsive. I can usually fix this by putting it to sleep and waking it up one more time. Sometimes when this happens the backlight comes on only very dim. I dont see a setting for the fast sleep while in a call. Here are some steps i have tried to resolve this issue.
tried to remove all items from home screen
chose to not show owner info or notes when turning on device.
Changed power settings to not turn off device.
changed backlight to always stay on for testing.
told the device to not lock after no usage.
problem existed before i unlocked the device.
Any Ideas?
to answer some questions i can see headed my way here is the info on my kaiser.
provider ATT TILT (unlocked)
rom version: 1.57.502.2
radio version 1.27.12.11
protocol version 22.45.88.07H
4gb sandisk microsd HC
installed apps:
TomTom Navigator 6 with US Maps
C. Ghisler & Co. Total Commander
Caywen Kevtris 2
3dtracking free tracking
Macromedia Flash Player ActiveX
MochaVNC
PocketCM Keyboard 0.10
Ateksoft Webcamera plus
tcpmp the core pocket media player
geekstoolbox.com siriusWM5
googlemaps
cingular pre_midlets
OZ communications OZ IM
peekpocket
BTAudioToggle
deathdrive
WM5 windows media codecs for WM6
I love my phone. Touchflo is working but tricky at times. I cant wait till the cube becomes solid. I havent tried any other roms yet.
some of the cabs i am using
attached are the exact cabs i used to install some of the apps.
I'm still annoyed that unlocking the phone (as in, unlock when it comes out of suspend with a pin, not sim unlocking) requires you to hit UNLOCK when you type in the pin, instead of the old way where the phone unlocks when you hit the last digit.
I'd still love some way to change it back.
Kaisertweak Works!!!
kaisertweak rocks. It disabled fastsleep which makes my problem not happen. I attached it.
2 issues
Is it just me or is the Tytn II's speaker behaves differently to the original Tytn and D810?
1. Go to the phone keypad, try dial a string of number quickly, the speaker will start to pop as it can not play the key sound fast enough.. This has never been a problem with my 838 Pro or D810.
2. Make the Tytn II to play a sound, after it finishes listen carefully for a noise that appears to be the speaker turning off, it seems like after a sound is played the speaker's power is continuously on for a few seconds before switching off. Again this is different and unnoticeable on the 838 Pro or D810.
happens to me too.
123thisisme said:
Is it just me or is the Tytn II's speaker behaves differently to the original Tytn and D810?
1. Go to the phone keypad, try dial a string of number quickly, the speaker will start to pop as it can not play the key sound fast enough.. This has never been a problem with my 838 Pro or D810.
2. Make the Tytn II to play a sound, after it finishes listen carefully for a noise that appears to be the speaker turning off, it seems like after a sound is played the speaker's power is continuously on for a few seconds before switching off. Again this is different and unnoticeable on the 838 Pro or D810.
Click to expand...
Click to collapse
I get the popping. It sounds like its making the speaker clip. I didnt get it until i changed to a cooked rom. IMHO, all cooked roms have bugs....but i would gladly settle for all of the worst bugs in the cooked roms over using the att tilt rom which was loaded with bloatware, fastsleep, proxy, crappy camera, crappy softkeyboard, etc.. etc.. etc... I really dont think its the speaker. I think its the rom. Backup and try a different one if you feel like testing.
Thanks,
-J
Related
I've had my Kaiser a few days now, here's a few problems that i've had... anyone had anything similar?
- Windows Live Today addon stops working... can't scroll left or right
- HTC plugin goes fuzzy... can go into programs/settings, but nothing actually loads up when clicking on it
- After using the phone, the screen goes dim... so i have to manually reset the brightness
- D-pad stops working after using the phone (can't scroll through TXTs/Emails etc)
In most cases i have to reboot to fix :S
I was hoping WM6 would be a lot stabler... but so far it doesn't seem all that great :S
Hi,
I haven't had the problems you have, not even heat yet as has been discussed. Perhaps it's because I am not taxing the unit yet.
However, I have not been able to synch my PC to the Kaiser to yet. Synching pictures, music, TV is not an issue because Windows Media Player is working. It's the Contacts, Notes, Tasks that I cannot synch.
When I open the Windows Mobile Device Center the Connection Settings window opens up with the Allow USB & Bluetooth Connections radio buttons. When I hit OK with both Radio buttons selected (USB & Bluetooth), that's it, the window closes and there's no Windows Mobile Device Center that opens up. Task Manager shows no open Windows Mobile Device Center application but does show a Windows Mobile Device Center process, wmdcBase.exe.
What am I missing here? Please help, 4 days & I still do not have my Contacts in this phone.
This is a duplicate post from lower down.
Cheers,
Phil
Pooper said:
I've had my Kaiser a few days now, here's a few problems that i've had... anyone had anything similar?
- Windows Live Today addon stops working... can't scroll left or right
- HTC plugin goes fuzzy... can go into programs/settings, but nothing actually loads up when clicking on it
- After using the phone, the screen goes dim... so i have to manually reset the brightness
- D-pad stops working after using the phone (can't scroll through TXTs/Emails etc)
In most cases i have to reboot to fix :S
I was hoping WM6 would be a lot stabler... but so far it doesn't seem all that great :S
Click to expand...
Click to collapse
1) this happens but only with the D-Pad sometimes. This also happend on the TyTN
2)haven't had that problem
3)Screen goes dim but if I touch the screen it comes back on
4) haven't had that problem
Pooper said:
I've had my Kaiser a few days now, here's a few problems that i've had... anyone had anything similar?
- Windows Live Today addon stops working... can't scroll left or right
- HTC plugin goes fuzzy... can go into programs/settings, but nothing actually loads up when clicking on it
- After using the phone, the screen goes dim... so i have to manually reset the brightness
- D-pad stops working after using the phone (can't scroll through TXTs/Emails etc)
In most cases i have to reboot to fix :S
I was hoping WM6 would be a lot stabler... but so far it doesn't seem all that great :S
Click to expand...
Click to collapse
Screen goes dim and the start menu does not work. This is because of the password pin set on your phone. If you deactivate it, it should be fine. It's definitely a bug on the Kaiser. There are registry hacks for this, but I have no idea how to get around it.
regarding the screen dimming, I assume this is with the HTC ROM.
My phone has been fine with the latest two AT&T ROMs (the first ROM had this prob, the screen would dim after 10 seconds). You can temporarily fix the problem by resetting the Backlight timeout Settings.. Backlight... Battery Power tab) to something like 1 minute. It will keep getting reset every once in a while though... You can also turn off the backlight timeout completely (unchecking the box), which seems to work longer.
BTW it seems to be a problem with the HTC Home plugin. When I installed the original AT&T ROM but didn't install the HTC Home today plugin, the problem did not happen.
I have seen the D-Pad problem in Outlook only - that is, hang up a call, then d-pad doesn't work to navigate thru email. Once email is open the D-Pad works... Solution is to kill (click x button) Outlook.
M
Screendim
Screen goes dim and the start menu does not work. This is because of the password pin set on your phone. If you deactivate it, it should be fine. It's definitely a bug on the Kaiser. There are registry hacks for this, but I have no idea how to get around it.
Click to expand...
Click to collapse
Same here, screen dims and startmenu does not work. Issue is I can't deactivate pw (corp security pollicy for pushmail client).
Could someone elaborate a bit on the possible reg hack that could fix this?
Thanks...
Hi
I made a small app that helps overcome this issue by making the phone usable again after a phone call.
You can get install instructions from here with a file a few posts down: http://www.modaco.com/index.php?showtopic=258974&view=findpost&p=841951
Hopefully it will be fixed by HTC soon so it's just a short term work around.
Regards
Phil
Thanks
That works, thank you very much for your effort!
We'll wait for the HTC fix.
mrpotts said:
However, I have not been able to synch my PC to the Kaiser to yet. Synching pictures, music, TV is not an issue because Windows Media Player is working. It's the Contacts, Notes, Tasks that I cannot synch.
Click to expand...
Click to collapse
You need Outlook installed to sync those.
Add this - SMS goes bust!
Details are here:
http://forum.xda-developers.com/showthread.php?t=330176
i had a 3g connection with google maps running in background (gps was accurate within 10 feet) and was playing namco's ms. pac-man on the tytn ii rom when device locked up mid game. Power button would put phone into standby, but it was locked up besides. i had to soft-reset.
Cool, do HTC release updated ROMs via their website?
Also, ive had the home plugin going fuzzy and locking up quite a few times now.... definitley more problems introduced since i enabled the 'lock' feature :S
No call button??
On the dialpad is no call button only videocall button???
Am i blind?........
With my phone the 'ok' button (not on the keyboard) doesn't always respond (well). Either to confirm a adjustment or to minimize/close an screen
I have found a pretty simple workaround for the issue with the screen going dim and the start menu not working after a call.
What appears to be happening is that the device is actually locking the screen yet the keypad to unlock is not displayed. So the start menu and such think they are locked. I found that if i simply power my device off and back on the password screen/unlock screen shows up. Unlock it and you are fine from there.
Not really a fix but it will save you a reboot.
Hmm im getting lots of sync problems with Windows Live :S, also my phone 'says' it's connected to 3G/H but then randomly doesnt send texts :S
Really starting to annoy me now!
I am running the stock tilt rom, the only thing i have loaded that deals with the sound at all that i know of is the HTC home plug in.
Randomly - at least i can't pick up a pattern, my phone is changing from sound on mode to silent/ vibrate/ sound off mode.
the plug in will still show that sound on mode is selected, but the icon at the top of the home screen shows vibrate and i have to click it to turn the sound on.
Other than casper - anyone have any ideas of how to fix or stop this?
as a side note, i have found one of the shortcomings so far of switching to the full PPC phone as the lack of sound profiles.
thanks - this forum is amazing.
pho said:
I am running the stock tilt rom, the only thing i have loaded that deals with the sound at all that i know of is the HTC home plug in.
Randomly - at least i can't pick up a pattern, my phone is changing from sound on mode to silent/ vibrate/ sound off mode.
the plug in will still show that sound on mode is selected, but the icon at the top of the home screen shows vibrate and i have to click it to turn the sound on.
Other than casper - anyone have any ideas of how to fix or stop this?
as a side note, i have found one of the shortcomings so far of switching to the full PPC phone as the lack of sound profiles.
thanks - this forum is amazing.
Click to expand...
Click to collapse
No idea. That always happened with HTC Home Plugin installed on my E-Ten, but I've never found a solution. I have no problems with it on my Kaiser.
EDIT: Is it happening when you have an active appointment?
If you set the HTC home profile tab to AUTO, it will change it to silent for when your calendar shows busy.
Try a) setting phone to ringer on (with the volume icon at the top) and then b) setting the HTC profile to Ringer on.
Then try setting it to vibrate etc and it should change and then stay there.
Otherwise there are a few good profile apps you can install.
Here's what i think. Unwired's post is spot on. The HTC Home plugin has the lite profile tab that let's you choose, "sound on", "silent", "vibrate", or "auto".
"Auto" will toggle automatically between "sound" and "vibrate" based on meetings in your calendar. When you are in a meeting, it goes to "vibrate". when you aren't, it sets it to "sound".
now, this function seems to work well on the Kaiser/TyTN II. BUT, in previous incarnations of this plug in, esp in the "cooked" WM6 ROMs for older devices like the Hermes/8525/TyTN I, this didn't quite work well. It was a well documented Notifications Queue-related bug.
But, again, the Kaiser doesn't seem to have this issue. At least no one has reported it. So, double check to make sure you don't have the "Auto" mode selected. And if you still see the "random" behavior, you would be the first person having such an issue on a Kaiser that I've heard of.
pho said:
I am running the stock tilt rom, the only thing i have loaded that deals with the sound at all that i know of is the HTC home plug in.
Randomly - at least i can't pick up a pattern, my phone is changing from sound on mode to silent/ vibrate/ sound off mode.
the plug in will still show that sound on mode is selected, but the icon at the top of the home screen shows vibrate and i have to click it to turn the sound on.
Other than casper - anyone have any ideas of how to fix or stop this?
as a side note, i have found one of the shortcomings so far of switching to the full PPC phone as the lack of sound profiles.
thanks - this forum is amazing.
Click to expand...
Click to collapse
I just noticed having this problem as well. I do think it happens when I am in an active appointment, but it shouldn't be happening because I had the profile set to Loud not Auto. Any thoughts?
Check out the second post from this thread:
http://forum.xda-developers.com/showthread.php?t=334704
rzanology says that the HTC Home 6 button version (the one that comes on the stock kaiser) will cause the Tilt to randomly switch to vibrate. So he recommended installing the cab file I attached to this post instead. The 2drawbacks to using the HTC Home cab I attached are: (1) you only have 3 tabs to work with (home, weather, launcher), not 6 (home, weather, launcher, favorite people, music and profile) and (2) the HT Home customizer by emunutz (see here: http://forum.xda-developers.com/showthread.php?t=319308 ) does not work with it.
I'm affraid rzanology was right. i pout the 6 button version on my phone the other day and now i'm missing calls right and left. i wish there was a cab to fix this.
I have the ATT Tilt, original ROM and installed the 6 button home plugin. I DO experience the random switch to vibrate. It happens a few times a day and is really annoying! I love some of the extra buttons on the 6 button home plugin and would hate to go back to the 3 button plugin. If anyone finds a solution to this please please please post it back here!
Thanks
OK, so, on the stock TyTN II (unlocked Kaiser, not the Tilt), the HTC Home is built into the ROM and I don't have the issue. So, those of you who have the Tilt, the HTC Home was not installed by default and you had to add it? If so, then maybe its to do with the version being installed? Or did the HTC Home come installed on the Tilt by default?
My phone is an ATT locked TILT model, I had to install the HTC Home plugin. If anyone knows if there is a version of the home plugin that does not have the vibrate issue, please let me know. I just uninstalled the plugin and am trying a different build to see if that helps. Now I have to re-customize...bummer...
I used Kaiser.HTC.Home.v2.0.814.722-schen.cab on my Orange Tytn 2 and havent had a problem with it.
(On my old Hermes with the black majik rom it would sometimes switch to between profiles when I looked at appointments.)
i dont know whats causign it, it use to happen on my 8525 as well....drove me up the wall!!!!! Odly enough, when the cooks cooked it into their roms it never happened. I even tried using the same exact version as one cooked into a rom and it still happened!
I'm going to dig through the forums and try to find the version you are referring to, as long as its the 6 button version I'm all for it. the one I just tried HTC.Kaiser.Home.Eng.0409.6Tab.schen.cab still has the vibrate issue. I will post back if the version you are mentioning works.
I am experiencing this issue and I have an HTC Kaiser and am running the stock HTC rom. The way that I would describe my issue is that randomly (at least I can't determine a pattern) the PDA volume and ring volume become muted when I have the 'normal' ring profile selected in the sound manager tab. I do not use the 'auto' profile and it does not happen when I have appointments in my calendar. Any one have any ideas?
I appear to have fixed the problem <knock on wood> with the latest version of HTC Home as long as I eliminate the Profiles tab.
i have the same issue with stock HTC rom. weird. didn't had this problem till i played around with the htc customizer(which doesn't work), s2u2 and Indibar
I got mine fixed by uninstalling the older version of htc home i had. I downloaded the customizer and let the customizer download the latest version of the htc home.
The one i originally got must have been one of the older versions that had problems
real annoying problem, have yet to find any solution to this
i have the opposite problem...it's on silent and i haven't touched my phone in hours, then suddenly i hear my phone ringing! it is quite embarassing when i expect it to be on silent.
I'm having this problem with my Tilt (factory ROM), where it automatically switches to Vibrate, here's what I've noticed:
I had HTC Home installed for a few days without the problem, it seemed to start only after I used the profiles tab for the first time. I don't know which version of HTC Home I installed, but most of the files in the .CAB are dated 6/21/2007, a few are 7/23/2007.
Sometimes the icon in the title bar changes to the little PDA with vibrating lines, but even worse sometimes the icon still shows the speaker but if I click on it it's set to Vibrate, so I can't just rely on a visual check.
I've tried a few things to fix this, nothing worked yet. I used the Notifications tab in FdcSoft Task Manager 2.7 to look through all the Notification events, nothing jumped out at me. So I used the Services tab to temporarily stop the Notify service, but the problem still happened while the service was stopped.
I stopped the only two services with HTC in the name, HtcServices(HSV2 and HTC Generic Service(HGS0. But the problem still happened.
Another strange thing I noticed, when I open Calendar and create a New Appointment about 2 minutes in the future (with a status of busy), immediately when I click OK, the phone switches to Vibrate. Same thing if I edit the appointment for a new time in the future.
Still loooking... but I'm about ready to just uninstall HTC Home.
Hi all,
I can't seem to discover how to achieve this and I'm tearing my hair out.
When my Ignito is in standby (ie, screen off and resting in my pocket) and I receive a text message, the screen comes back to life and it plays a little sound. I'm happy to hear a noise, but I can't work out how to make sure the screen stays off.
Picture the scenario: Walking along a busy road, a txt arrives, unheard in my pocket. The screen comes to life. Then the touch sensitivity comes into play and suddenly my phone is carrying out random touchscreen activated functions, including some rather long and unexpected phone calls to my brother in law!!!
How can I ensure the screen stays off? In Settings/Sound and notifications, my "receive text message" only has "play sound" checked. "display message on screen" is off. So I expect the screen really ought to stay off!!!
What am I missing here?
Cheers,
Mike
o2 XDA Ignito Rom 1.93.206.3 WWE
Radio 1.00.25.05
Advanced Config
[email protected] said:
Hi all,
I can't seem to discover how to achieve this and I'm tearing my hair out.
When my Ignito is in standby (ie, screen off and resting in my pocket) and I receive a text message, the screen comes back to life and it plays a little sound. I'm happy to hear a noise, but I can't work out how to make sure the screen stays off.
Picture the scenario: Walking along a busy road, a txt arrives, unheard in my pocket. The screen comes to life. Then the touch sensitivity comes into play and suddenly my phone is carrying out random touchscreen activated functions, including some rather long and unexpected phone calls to my brother in law!!!
How can I ensure the screen stays off? In Settings/Sound and notifications, my "receive text message" only has "play sound" checked. "display message on screen" is off. So I expect the screen really ought to stay off!!!
What am I missing here?
Cheers,
Mike
o2 XDA Ignito Rom 1.93.206.3 WWE
Radio 1.00.25.05
Click to expand...
Click to collapse
You can stop your device from getting awake by downloading the Advanced Config app here on XDA http://forum.xda-developers.com/showthread.php?t=418151
Then, when you installed it, you select the option 'Messaging'....from there you go to: 'wake up on new sms' and disable this option....hope this will help you to solve your problem
Thanks for your help.
I have already downloaded this app (advanced config version 3.2) but under messaging, there is no "wake up on new sms" option.
Is there a registry key I can amend manually? I've had a look around my device but can't see a suitable "wake on SMS" key.
Then again, I'm quite new to windows mobile...
Cheers
http://forum.xda-developers.com/showthread.php?t=398265
3. Wake Up on New SMS --> HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
Click to expand...
Click to collapse
[email protected] said:
Thanks for your help.
I have already downloaded this app (advanced config version 3.2) but under messaging, there is no "wake up on new sms" option.
Is there a registry key I can amend manually? I've had a look around my device but can't see a suitable "wake on SMS" key.
Then again, I'm quite new to windows mobile...
Cheers
Click to expand...
Click to collapse
Strange on my copy of advanced config 3.2 i have that option....have you soft resetted your device after installing the app??...might be worth a try.
If you set it to 0, does that mean the device does not wake up when there is a message? Do you still hear the sound? How would you then unlock the phone?
(Sorry, I still don't have the Touch Pro but will get it once it's available here )
koppee1 said:
If you set it to 0, does that mean the device does not wake up when there is a message? Do you still hear the sound? How would you then unlock the phone?
(Sorry, I still don't have the Touch Pro but will get it once it's available here )
Click to expand...
Click to collapse
Yes...the phone doesn't wake up when you receive a new text...i'm not sure if it will make a sound....(in thought not so) i'm not sure...good luck
Yes, it will sound accordingly but the screen will not come on (wake up). That option to turn it on/off is available in Advance Config V 3.2.
Well, my Advanced config definitely does not have the option as described. However, i made the registry key myself and it works quite nicely.
Strangely, now when I receive a message and the device in standby, it plays my "text received" sound twice. Odd indeed. Unless the device is locked and in standby, when only plays the sound once. I can live with this.
Thanks everyone for your help
[email protected] said:
Well, my Advanced config definitely does not have the option as described. However, i made the registry key myself and it works quite nicely.
Strangely, now when I receive a message and the device in standby, it plays my "text received" sound twice. Odd indeed. Unless the device is locked and in standby, when only plays the sound once. I can live with this.
Thanks everyone for your help
Click to expand...
Click to collapse
I have this problem too, so it seems like the ignitos dont have this in their registry..? How did you make your own registry key..anyone able to help me out here! Today I received a text message and while in my pocket the phone just started dialling random people
Does anyone know how to stop the device returning to the Touchflo 3D home screen every time I wake the device up? I have a Touch Pro but no-one seems to know the answer to this in the forum and I guess it's a TF3D issue.
I can't find anything about this on a search, but I'm sure I remember reading about it in the Diamond forum.
It's annoying when it goes off when I'm writing a text message or in a call or listening to music and I have to navigate all the way back.
Same Problem
yes... i have the exact same problem.
To add to it, I've set autolock also. When I'm trying to watch a vedio on you tube, and if it's taking some time to buffer, the phone locks. And upon unlocking, i'll find myself in the home screen... and have to navigate back to youtube menu all again.
Very uncomfortable behaviour, especially when you are trying to show off the features on your phone to friends...
Is this solved in any new ROMs... or is there a tweak for setting this right?
I like the autolock thing - it's great. However when I'm writing a message or something it is so annoying.
Also, because the screen on the Touch Pro goes off in calls, it always goes back to the home screen so you can't see the call status, can't add notes and can't read contacts as easily. More annoyingly, my line of work involves phone systems that require entering numbers a lot so I always need to see the phone keypad. Very annoying.
did you guys every get this sorted. Just got my diamond 2 and I have the same annoying problem
hi all,
i do have several problems with my diamond, first of all i am using an offical rom by htc its 2.03.xxx and the manila of the hd
to come to my problems i am giving u a list of problems which i were not able to solve:
1. nearly each day my diamond dials into the internet to check for email, but i didnt
2.sometimes it happens that when i am getting my diamond out of the pocket he asks me whether i am sure to turn the diamond off or not, but i didnt push the off button, especially not that long
3.the touchfield below the display is just usable with my fingers, not with the stylus or something like this, but earlier it did work with finger and stylus
4.very often it happens that when i am called that my diamond just take off the telephone call(which is nearly impossible becuase i do have the slider and to press the field down it needs very much which isnt existing in my pocket)
5. when i am controlling my volummne i have often problems that the systemloudness is very loud but the ringtone loudness stays on silent or turns on silent
i do not prefer to have a hardreset as a solution because than i would have to made all the vocabulary again
proxy] said:
1. nearly each day my diamond dials into the internet to check for email, but i didnt
Click to expand...
Click to collapse
Check the config of the mail app. Maybe you've got the 'check for new mail every X minutes' enabled.
proxy] said:
2.sometimes it happens that when i am getting my diamond out of the pocket he asks me whether i am sure to turn the diamond off or not, but i didnt push the off button, especially not that long
Click to expand...
Click to collapse
Sure you press the ON/OFF button accidentally...
proxy] said:
3.the touchfield below the display is just usable with my fingers, not with the stylus or something like this, but earlier it did work with finger and stylus
Click to expand...
Click to collapse
Mine doesn't work with stylus, so...
proxy] said:
4.very often it happens that when i am called that my diamond just take off the telephone call(which is nearly impossible becuase i do have the slider and to press the field down it needs very much which isnt existing in my pocket)
Click to expand...
Click to collapse
There's an option that automatically takes the call after a few seconds or rings. Check the phone setup.
proxy] said:
5. when i am controlling my volummne i have often problems that the systemloudness is very loud but the ringtone loudness stays on silent or turns on silent
Click to expand...
Click to collapse
When you press the up/down volume, you're modifying the system volume. On top-left of the screen you'll see an arrow. Click it and you could access to the ringtone volume.
Hope it helps.