Database Develop

Good car charger

Does anyone know of a good car charger? I'm considering the proclip charging stand but $70 is steep. The charger I got for my RAZR from just wireless works because it's USB but it plain sucks. It stops charging periodically and I have to disconnect and reconnect it. It also charges very slowly.

The OEM ones they sell at the at&t Corporate owned stores work good. They cost $30 unless you have a company discount on your account.

Re
After my active car holder from brodit was broken (fired up, ruined my tytn and unusable) I decided to do a cheap solution. I bought a HAMA car charger for the MDA music II, cut of the powerplug and solded it onto my broken brodit holder. It works again now, without blowing up my tytn.
So the HAMA charger is perfectly suited, and i paid only 8 euro's for it!
(why didnt i exchanged my brodit? because i live in norway now and i didnt want to wait another 2 months for a new brodit so decided just to weld another powerplug on the broken brodit)

swiftgs said:
After my active car holder from brodit was broken (fired up, ruined my tytn and unusable) I decided to do a cheap solution. I bought a HAMA car charger for the MDA music II, cut of the powerplug and solded it onto my broken brodit holder. It works again now, without blowing up my tytn.
So the HAMA charger is perfectly suited, and i paid only 8 euro's for it!
(why didnt i exchanged my brodit? because i live in norway now and i didnt want to wait another 2 months for a new brodit so decided just to weld another powerplug on the broken brodit)
Click to expand...
Click to collapse
Hi,
I have the GPSforless was cheep and it works like a charm...
cheers

Tilt depot is based in Florida and sells several different chargers. I bought an HTC OEM charger from them for around $25 delivered.
www.tiltdepot.com

Back in November, I bought an "OEM Tilt Car Charger" on eBay for about $12 delivered.
The item that came was indeed in AT&T packaging, but the molded lettering on the unit said "Wireless Solutions model #474987."
So, convinced that I got screwed by an unscrupulous seller who stuffed an aftermarket charger in AT&T packaging, I went to my local AT&T corporate store to look at their chargers.
Guess what? They sell the "Wireless Solutions model #474987" in AT&T packaging. For $25, plus tax.

I've got a Brodit passive holder & proclip mount with a usb cable into a USB adapter in the cigarette lighter socket.
Simple & works a treat, as I can also use it to charge a bluetooth headset, camera etc. etc.

I have this, and have found it really good:
http://cgi.ebay.co.uk/ws/eBayISAPI....m=300189722865&ssPageName=STRK:MEWN:IT&ih=020
Ony negative about it is that the cable from cigarette lighter socket to windscreen is too short for some cars...

I got an iPod car charger. Don't remember who makes it but it is just a 12v to USB adaptor. You plug the iPod cable into the USB. Works with the Tilt USB cable too.

cheap
Bought mine here in the Netherlands for 4,95 euro
its a usb cigaret lighter charger 1100 mah
when tytn is in holder and standby it charges with aprox. 800 mah
Store called kruidvat

I use a car charger from Boxwave and it works very well; even when using GPS, it does charge the unit. As opposed to an old Motorola Razr car charger I was using that couldn't even maintain a positive charge when using GPS.
Also, Boxwave sells a nice, inexpensive mini-USB adaptor that allows you to use any headphones with a 3.5 mm jack. I am also happy with their extended battery (2700mAh); I just wish I could find a case that would fit it.

I use an iGo. Between my wife, kids, and myself we have 3 different charger ports. I like the fact that the unit has changeable tips. It also charges well, and is attractive.

$9.99 AT&T OEM Charger & $15.99 expandable GPS/PDA/Phone craddle (can be hard mounted, velcroed, or use cup holders & turned from landscape to portrait & will accomodate the unit with open KB) from best buy. I also have their tablet pc mount & a split USB charge to sync cable so I can provide my laptop with GPS & a data connection anywhere. Total setup less than 60.00

I picked up a Kensington USB car charger at Circuit City for $9.99 a couple weeks ago. It's a charger only so you'll need a usb cable also - I had no shortage of those. Nice and small with a blue status light and 1000ma output, so it charges pretty fast. At that price, I bought a spare.

OEM Wall Charger
Does anyone know a reliable source for OEM HTC Kaiser Wall Chargers? Ones that are ACTUALLY HTC chargers with the proprietary shape noted below?
I'm looking for the USB that has this shape.
____
|___/
NOT this shape:
____
\___/ with both sides having an angle.
I can find PLENTY of so-called OEM chargers, but none of them really seem to differentiate between the two shapes above. I simply cannot get the Kaiser to charge anymore using standard miniUSB, so I want to make sure I am ordering the proprietary shape.
So many of the threads here even refer to them interchangeably, and I really want to avoid standard miniUSB chargers. HTC does not seem to have them on their website. Bastards. Heh.
Thanks!!

Here's mine:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Home made

rush242 said:
Does anyone know a reliable source for OEM HTC Kaiser Wall Chargers? Ones that are ACTUALLY HTC chargers with the proprietary shape noted below?
I'm looking for the USB that has this shape.
____
|___/
NOT this shape:
____
\___/ with both sides having an angle.
HTC does not seem to have them on their website. Bastards. Heh.
Click to expand...
Click to collapse
Erm obviously not, since all HTC original chargers use the standard shape with "both sides having an angle" as you show it...
The top plug is only used on the headphones, there are no chargers that use it.

Car chargers

Does anyone know of a car charger that fits in perfectly in the cig lighter in the car. All Incar chargers I have ever bought never fit in perfectly and with the slightest amount of touch lose power until I push it in again.
I want a nice snug fit just the the cig lighter has with its own lighter thing. I absiolutely hate the give/movement these incar chargers have.
Any ideas?

Hey there, i bought an adapter and just use my usb cable that came with the phone..
Its a tight fit with just a little movement. Never looses the connection, have had no problems
http://www.amazon.co.uk/eXpansys-USB-Car-Charger-Adapter/dp/B00008W5N8

I have one of these:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Belkin Micro USB charger
I use it with this http://www.fommy.co.uk/view-full-page.asp?divid=HTC&model=HTC+HD2&skuno=82268. The Belkin Micro charger can be bought from much anywhere and it works very well.

car charger
I use Igo chargers, never had problem, just buy new tip when you change phone. Don't have to carry charger for every phone. They have multi charger kit, comes with home,car, &tip, & retractable cord. Love it, they fit snug, with led lite. Quig

i got one of these for 3 bucks on sale. and for the price it friggin rules!!!
http://www.meritline.com/mini-usb-interfaced-incar-charger---p-41421.aspx

I use a dual USB car charger from Griffin Technology known as the powerjolt.
http://www.griffintechnology.com/products/powerjolt-dual-universal
No other car charger fits my cigarette lighter slot as well. I think this is quite tight but can still pop out. My high tech solution is to stick a bit of card in there with the cahrger. It works perfectly and doesn't need to be wedged in very far to create a rock solid connection.

xavierdemon said:
I have one of these:
Belkin Micro USB charger
I use it with this http://www.fommy.co.uk/view-full-page.asp?divid=HTC&model=HTC+HD2&skuno=82268. The Belkin Micro charger can be bought from much anywhere and it works very well.
Click to expand...
Click to collapse
I even got this, but you have to open it and melt pin 2&3 together that the Leo can be charged with more than 500 mAh and its recognized as charger not as USB Port

NightFire123 said:
I even got this, but you have to open it and melt pin 2&3 together that the Leo can be charged with more than 500 mAh and its recognized as charger not as USB Port
Click to expand...
Click to collapse
I haven't modded mine at all and it works fine

xavierdemon said:
I haven't modded mine at all and it works fine
Click to expand...
Click to collapse
What colour is your led mine is green, mybe different product in germany

The LED is Green on mine as well and it doess charge the phone perfectly well as have used numerous times without any problem.

xavierdemon said:
I have one of these:
Belkin Micro USB charger
Click to expand...
Click to collapse
+ 1
Works well, snug fit too.

The leo ´s plastic parts are covered by some kinda smooth coating. I wonder if it takes damage if you use car holders (especially the brodit one - I think I might buy this one). What do you guys say? Has anyone experiences with this?

is 500mA enough to charge the phone + use navigation or play music?

HTC_Junglist said:
+ 1
Works well, snug fit too.
Click to expand...
Click to collapse
yes works very good.

alecs said:
I use a dual USB car charger from Griffin Technology known as the powerjolt.
http://www.griffintechnology.com/products/powerjolt-dual-universal
No other car charger fits my cigarette lighter slot as well. I think this is quite tight but can still pop out. My high tech solution is to stick a bit of card in there with the cahrger. It works perfectly and doesn't need to be wedged in very far to create a rock solid connection.
Click to expand...
Click to collapse
I bought this one at walmart on our way out of town one day to run my HD2 and my daughters iPhone 3G...My HD2 always overheats when I use it (the LED flashes orange and green after about 15-20 minutes) Even if I dont have anything else plugged into it.
Mine may be an isolated issue (though I dont see how)...but I dont know if I would recommend this...as overheating the battery often cannot be good in the long run.

methodz said:
i got one of these for 3 bucks on sale. and for the price it friggin rules!!!
http://www.meritline.com/mini-usb-interfaced-incar-charger---p-41421.aspx
Click to expand...
Click to collapse
Does this sit flush on the top of the lighter jack?...that would be the perfect solution so I could unplug the cable but leave the adapter in and still be able to close the ashtray (change drawer) lid.
...Have you had any power or overheating issues?...(see my post above)
It looks like the price in your link has gone up to 12.99...but a quick google search gave me a price of 5.99+free shipping

USB Car Chargers

Its seems the charging standards for USB car chargers have not been ratified so there are two different types out there....
So when you buy a car charger, its a little bit of a gamble to weather it will work or not...
This one does work
Ebay item : 130398121842
(its not me selling them)
I'm hear from some source that pins 2 & 3 need to be shorted, also hearing then need a 200ohm resistor between them. If anyone can clear up the confusion, that would be a massive help.
Apart from that, lovin my Streak...

The MotorMonkey doesn't work, although that's not a surprise as it only allows a current draw of 0.7A. The htc branded in-car adapter works fine though...
Sent from my Dell Streak using XDA App

Desperately need a car charger. Anyone found anything that works ?
Thanks.

Sorry,
duplicate post

Well, in addition to the motormonkey, the Belkin universal usb car charger doesn't work, neither do any sold at Maplin. As a last resort I bought a slimline Power invertor for £15 . . . which promptly fell apart the 1st time I unplugged my charge. This is pretty ridiculous, Dell will not sell the charger unit without the mount. Has anybody found a working car charging option that doesn't cost £50?!

Had my streak for about 3 weeks now and had not tried it in the car but after reading this post i thought i would go and try the car adaptor i had purchased for the TP2 that i had
and viola it worked no problem charged it very fast i have put the link at the end i purchased it from ebay
HERE

Hi,
Just in case it helps anyone, take your existing 12V USB adapter apart if it's not working with the streak and solder pins 2 and 3 together (the middle two, preferably at the PCB end if it has one). Works
I have gone from non-working to working in about 5 mins flat!! I should point out mine is a 1A charger. Think it needs to be with the Streak?
HTH....
PS what an AWESOME device. Just awaiting 2.2 now (hopefully)

Usb car charger
Hi
To anybody having issues with a USB Car Charger, I have managed to solder the 2nd and 3rd Pins in a charger purchased from Ebay, and it works perfectly.
The Item number for the charger from Ebay is # 220605256968
I have taken pictures of a small piece of wire that I used to solder the two points together, incase anybody is wondering how it can be done.
The link for the pics is as follows:
h t t p ://picasaweb.google.co.uk/tallatkhan/USBCHARGER
(delete the spaces between the http above)
Hope this helps!
Tallat Khan

Tis true you can get any plug and just solder middle pins together, I tried about ten of em none worked, blob of solder job done..

I just opened up my USB console I installed on my Harley and soldered pins 2&3 together and now it charges
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I already have a bunch of AC powered USB ports and car USB adapters... A bit of surgery there and I'll be set.

Just did it on a Scosche plug. It has two adapters. I dropped a bit of solder on the circuit board for the middle pins on one plug. That plug now works and the second doesn't.

the solder thing is interesting, ill give it a shot.
i went into the AT&T store for a USB charger, turned out their AT&T branded iPhone charger + USB port won't charge it even though an employee suggested it.

Please Be Careful with this trick.
The Streak WILL draw 1000mA when you solder those 2 pins together.
If the charger is not rated for that, something bad will happen.
I did this as a test to a cheap 12v USB adapter (Off-brand Sony PSP accessories Kit), and the chip in it became very hot within a few seconds. It was charging the Streak, but it would not last long at the temp it was at.
I un-soldered the pins since I would rather have a low-current charger than a burned out charger. The charger was only rated at 500mA.
The Dell House charger is rated at 1000mA, so I would assume that if a charger was rated at 1000mA or greater, and you trust that rating, it is OK to do this.
There is a reason why they did what they did.

Good point, but it should be noted that a decent charger will have a fuse in it.

It isn't the issue having a fuse... many of these "cheap" chargers only support 500mA. If you were to draw too much current, you would likely blow the regulator chip/circuit... Make it have a nice meltdown
That being the case, there are ways to MAKE your own 12v USB chargers that would supply 1A, for not too much money... $4.00 in 2 chips from radio shack and about $10-$15 in other assorted parts. It would never be too pretty, but it would be a custom project that many people enjoy doing. (the original hackers used wire, tape and soldering irons)

I like my Streak to much to fry it. I purchased a cyberpower charger and it works perfectly...

For the record, bought one of these Griffin iTrip Auto Universal Plus FM Transmitter, thought it'd be nice to get the FM transmitter and charger in one. Unfortunately, the charger port DOES NOT work with the streak. Pretty upsetting.
h t t p ://cgi.ebay.com/Griffin-iTrip-Auto-Universal-Plus-FM-Transmitter-iPod-/370320858927?pt=Other_MP3_Player_Accessories
Also, iphone wall chargers will also not charge the streak. That's also upsetting since my last phone was an iphone.

it has 4 pins at the battery contact, I would like to know which pins are postive(+) and negative(-) on the battery contact?
can you help me to do a test on the battery??
thank you vvvvvery much~~~~

Asking the same question in three different threads on the same forum is annoying.

I ended up buying a mains invertor for £15 from Maplin
Sent from my Dell Streak using XDA App

HD2 LEO back side pins[Q]

At first I would like to apologize if this topic already is somewhere there. I didn't know how to call thouse pins so I didn't know what to serach for.
When I look at the back side of Leo I can see three unused pins. I remember HTC Himalaya, where thouse pins were for extension pack with VGA OUT, CF slot and next battery.
Review of the cover
Does anyone know what are thouse pins for? CF slot is death but VGA OUT is usefull. Older QC generation was able to VGA OUT so why Snapdragon wouldn't?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

+1...
DN41

Problem solved
They are in use with original car holder

i guessed s.th. like that
thanks mate =)
DN41

Cannot believe that/
Sir Andrew CZ said:
Problem solved
They are in use with original car holder
Click to expand...
Click to collapse
So one has to remove the battery cover in order to put the HD2 in the car holder?
Sorry, but this I do not believe it, I have never seen such car holders that demanded removing crucial/standard parts in order for the device to be able to function.... (Apart from a small rubber (dust)cover....)
Please document your findings with a link.
Personally I believe this is more for service/mantenance/diagnosing a broken device by tech support.

Wilco said:
So one has to remove the battery cover in order to put the HD2 in the car holder?
Sorry, but this I do not believe it, I have never seen such car holders that demanded removing crucial/standard parts in order for the device to be able to function.... (Apart from a small rubber (dust)cover....)
Please document your findings with a link.
Personally I believe this is more for service/mantenance/diagnosing a broken device by tech support.
Click to expand...
Click to collapse
believe it, bub. As retarded as it is, HTC has made it that way with the HD2. The car holder will activate the Navpanel (via the 3 pins in the back) while charging the phone at the same time.

lude219 said:
believe it, bub. As retarded as it is, HTC has made it that way with the HD2. The car holder will activate the Navpanel (via the 3 pins in the back) while charging the phone at the same time.
Click to expand...
Click to collapse
So in order to use the car adapter one should everytime remove the battery cover?
That's really retarded : where to leave it while driving? in your pocket is not to comfortable
They should mention that in the specs before one pays around $90 for that piece of cr*p
Bought mine at Dealextreme for under $10, works perfectly, only need car charger....

Wilco said:
So in order to use the car adapter one should everytime remove the battery cover?
That's really retarded : where to leave it while driving? in your pocket is not to comfortable
They should mention that in the specs before one pays around $90 for that piece of cr*p
Bought mine at Dealextreme for under $10, works perfectly, only need car charger....
Click to expand...
Click to collapse
CAR HOLDER. Not car adapter. HTC made a car holder for the HD2. It has a suction cup stuck to the front windshield. The car holder is there to activate the Navpanel for using GPS program.

Wilco said:
So in order to use the car adapter one should everytime remove the battery cover?
That's really retarded : where to leave it while driving? in your pocket is not to comfortable
They should mention that in the specs before one pays around $90 for that piece of cr*p
Bought mine at Dealextreme for under $10, works perfectly, only need car charger....
Click to expand...
Click to collapse
The car holder was to ship with a new battery cover which connected to those pins.
Search google for "Official HD2 car holder" then you can see pictures of it, it was actually
a very nice design, not retarded in any way.

Replacement back cover is not so bad
But I still don't know WHY buy expensive original holder with this "speciality" when I can buy 3 dollar holder on eBay with normal attachment...

These pins were for the original HTC car holder which never came to market. Therefore it was necessary to replace the rear cover permanently and stick with it at the car holder.
The now available HTC car holder is using a hughe plastic thing and the HD2 gets connected via Mini USB.
Neverteless, it would be very interest how these pins are usable for personal mods and so on. does anyone knows which functions they provide or how they can be used?

sorry to dig up a massively old subject, but I figured I would jump on the end of this instead of a whole new thread, now that this thread established what the subject matter is.
I want to put an induction coil in my phone (using a plastic back-plate obviously) and I'm wondering if I could feed power into these pins, obviously they were meant for charging so they should accept charge from other things, does anyone know the polarity of the metal tabs so I don't fry my hd2 with trial and error?

davidcampbell, did you try it? Cause i wanna use that two pins for charging and don`t know polarity too...

Seems like i have an answer. We need a block with 3 pins behind a battery cover, where left is minus and right is plus.

FunFrog said:
Seems like i have an answer. We need a block with 3 pins behind a battery cover, where left is minus and right is plus.
Click to expand...
Click to collapse
Is this confirmed? Have you tried connecting power to the leads? Ive been contemplating turning the phone into a din-mounted stereo when I switch carriers and would like something better than microusb for power.
When powering these leads, can you remove the battery and still run the device? Unlike the microusb...

I,m also intrested in connecting cheap china wireles charging coil to those pins. Also I found out that they are used by Powermat Wireles Charging System for HTC HD2. Here you can see a picture showing this plug. So it seems that pin 1 and 3 is used for charging. But not shure about polarity.

pa0l080 said:
I,m also intrested in connecting cheap china wireles charging coil to those pins. Also I found out that they are used by Powermat Wireles Charging System for HTC HD2. Here you can see a picture showing this plug. So it seems that pin 1 and 3 is used for charging. But not shure about polarity.
Click to expand...
Click to collapse
With battery door removed & looking into the back with the 3 pins in the bottom left the left most pin is +5v & right most pin is ground ...

I beg your pardon!
Prompt. There were official comments of the existence of this car holder (uses charge pins) from the HTC company?
Sorry for my language (google translate).

HD7 Desk Docks/Cradles

A couple of Desk Docks popping up around the web recently, anyone got one and can give a brief review?
Cheaper one £9
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Extended one (with additional Battery slot) £15

They don't look bad but best to get one that has the micro-usb AND a headphone plug - that way you can attach it to your Hi-Fi, pc etc to pump the sound from!
If not then these ones from Brando look nice:
$18 + $3 P&P
$17 + $3 P&P (various colours available!)
I have always found Brando excellent and have used him for years now - I have just got the reflection free screen protector for my HD7 and it makes it easier to see outside and much smoother to the touch!

yeah good point, i don't think i've spotted one with a headphone socket yet... I wonder if we'll see docking stations with built in speakers anytime soon....

Fingers crossed - always annoys me the iPoo gets docks galore but HTC phones don't even though they have great audio capabilities!

I've bought this one: http://kidigi.com/product_lv2.php?pid=1230
It has well working line-out and it can charge a second battery. It looks and feels great.
BUT my PC does not recognize my HD7 in the cradle. It can be charged via USB but not synced

chr5s11 said:
I've bought this one: http://kidigi.com/product_lv2.php?pid=1230
It has well working line-out and it can charge a second battery. It looks and feels great.
BUT my PC does not recognize my HD7 in the cradle. It can be charged via USB but not synced
Click to expand...
Click to collapse
That looks very nice!
The description says it charges and syncs. Did you contact the company for a replacement or fix? Maybe you got a bad unit

chr5s11 said:
I've bought this one: http://kidigi.com/product_lv2.php?pid=1230
It has well working line-out and it can charge a second battery. It looks and feels great.
BUT my PC does not recognize my HD7 in the cradle. It can be charged via USB but not synced
Click to expand...
Click to collapse
I had a Kidigi cradle for my touch pro - you have to have the MINI-usb power adapter plugged in AND the MICRO-usb supplied with your phone plugged in to the PC for it to sync.... that way it charges and syncs at same time.

adamelphick said:
I had a Kidigi cradle for my touch pro - you have to have the MINI-usb power adapter plugged in AND the MICRO-usb supplied with your phone plugged in to the PC for it to sync.... that way it charges and syncs at same time.
Click to expand...
Click to collapse
Thanks for the hint. I tried that, but it doesn't work either. Syncing via WLAN works fine.
I wrote to the support of the shop where I bought it, but I haven't got any reply so far.

adamelphick said:
They don't look bad but best to get one that has the micro-usb AND a headphone plug - that way you can attach it to your Hi-Fi, pc etc to pump the sound from!
Click to expand...
Click to collapse
I just bought one of these.
I had the equivalent for my HD2, and it's really excellent. It's got everything I need - spare battery charging bay, power connector, USB to PC connector, audio connector - the full set. A good price too.
- Link

Buyed THIS ONE yesterday.
When it will arrive I'll post my opinions and, hope, some photos.
Bye, Marco.

Wow some of those are quite nice looking.

William Hart said:
I just bought one of these.
I had the equivalent for my HD2, and it's really excellent. It's got everything I need - spare battery charging bay, power connector, USB to PC connector, audio connector - the full set. A good price too.
- Link
Click to expand...
Click to collapse
These both look good.
I was looking at one just the other day. Still not sure which to go with.

Yeah I really like the look of that charger, does someone have a trusted site for the States? I wanna buy one, but I just don't know about some of these sites.
And the sites that do look decent, are always in the UK! What gives?!
Can someone hit me back with a link for State side website that you've personally bought from before, and that the company does exist somewhere.
Thanks yall!

Do any of these docks/cradles work with a case on?
I have the PixelSkin case for my HD7. Will my phone with the case on fit in any of these docks/cradles?

Good Day,
I presently own both the hd2 and hd7, and am not able to dock either phone while in their cases...Due to the chargers fitting so well as to promote
stability while charging. (Of course it may depend on which cradle you own/purchase.) I have 2 different style cradles, and both give the same results.
I hope this helps.

Good Day,
I have purchased 2 different style cradles...1 from mygadgetgarage (hd2/hd7) (ebay) and the other from talkietech (hd2) (also ebay). Both sites treated me excellent. Fast shipping/Great prices.

i just bought a slip in real leather case by HTC. Good thing is you can just pull up your phone without using fingers to squeeze through the side when you need to pull out the phone.