I want to be able to disable the flashing green LED, telling me the phone is on. And I want to disable the flashing blue LED, telling me that bluetooth is on, etc. Is there a way to do this without also disabling vibrate mode (which I know has been an issue on some other phones)?
Thanks
Try this reg edit:
Hkey_Local_Machine/Drivers/Builtin/AllLEDMgr
Change the Index value from 1 to 0
Appreciate the answer. Works perfectly. Absolutely no LED blinking
EXCEPT now it won't vibrate at all.
Anyone know how to fix that?
How about KaiserNotifications for this?
http://www.modaco.com/Kaiser-Notifications-t259413.html
Kaiser Notifications (for HTC Tytn II only)
This program allows you to change the way the Kaiser flashes it's LED's when you have a Mobile signal/Bluetooth/Missed calls for the left hand LED, and New emails/SMS text messages on the right hand LED.
By using the right LED for SMS/Emails you can use the brighter blue LED to really get your attention should a text or email have arrived when you were out of sight of the phone.
You can also turn off all annoying flashes, useful for night time or when watching a video.
Click to expand...
Click to collapse
Sort of for AT&T
^This may work better on the HTC units compared to AT&T. On an AT&T device it does disable all of the LEDs without disabling the vibrate. However, the LEDs are not on the same side of the two units nor do they mean the exact same thing. Finally there appears to be a very strange mapping between the LED indicated in the program and the LED that actually gets affected. Definitely crossed wires a bit, nonetheless, still effective.
Hello!
Have anyone noticed that when disabling LEDs (using this tweak) TomTom stops receaving GPS data? Any other GPS software works fine!
Regards Risto
I installed Kaiser Notifications and it works great!
Ok, I didnt try that. I just tryed that registry setting!
Risto
joeonsunset said:
How about KaiserNotifications for this?
http://www.modaco.com/Kaiser-Notifications-t259413.html
Click to expand...
Click to collapse
Absolutely great!
no2chem nueled will do it all and more
All ready done many times over. Cab installer
http://forum.xda-developers.com/showthread.php?p=1954259
acehole said:
All ready done many times over. Cab installer
http://forum.xda-developers.com/showthread.php?p=1954259
Click to expand...
Click to collapse
Ugh, except it won't uninstall and for me in WM6.1 it starts blinking and never stops, ever.
wow, this topic has been dead for over a year lol
Related
I'm having a problem with my XDA Stellar. O2 always displays your credit on screen after and call/text in the form of a network message. The thing is i can't find out if you can turn off the sound for these alerts. I've tried changing everything under "sounds and notifications" but it doesn't seem to be in there. The only way i can stop it making noise is to turn the sound off on the phone completely which means i then have to turn it back on before using something like tomtom.
So my question is, can this sound be turned off and if not can the alert be turned off altogether?
Thanks
Perhaps kaiser tweak will help.
http://forum.xda-developers.com/showthread.php?t=333898
No, unfortunately as good as KaiserTweak is, it has nothing to help me.
Bump. Does anyone have any idea on what to do about this as it's becoming a serious problem
when the message comes in, which sound does it make?
What im trying to get at is maybe the phone is seeing it as a system even/warning which you can't change through the drop down list but you can disable. Try going to sounds and notifications and on the first page there untick "Events (warnings, system events)" and see if that stops them from making a sound
My wife had this with her 6230i - the solution was to phone O2 and ask them to turn off the notification at their end.
Jon
fone_fanatic said:
when the message comes in, which sound does it make?
What im trying to get at is maybe the phone is seeing it as a system even/warning which you can't change through the drop down list but you can disable. Try going to sounds and notifications and on the first page there untick "Events (warnings, system events)" and see if that stops them from making a sound
Click to expand...
Click to collapse
Yeah, thats what I did to disable text message sounds. It works. Settings>Sounds&Notifications>Notifications Tab.....and im sure you'll figure out the rest.
How is this a serious problem? Someone that has cancer has a serious problem.. Anyways, turning off the sent notification in the KaiserTweak didn't work for you? Maybe one of the registry gurus can figure it out.
fone_fanatic said:
when the message comes in, which sound does it make?
What im trying to get at is maybe the phone is seeing it as a system even/warning which you can't change through the drop down list but you can disable. Try going to sounds and notifications and on the first page there untick "Events (warnings, system events)" and see if that stops them from making a sound
Click to expand...
Click to collapse
It plays the "notify" sound. I can turn off literally everything in sounds and notifications including events and programs and it still makes a noise. the only way to stop it is to turn all sound off.
My wife had this with her 6230i - the solution was to phone O2 and ask them to turn off the notification at their end.
Click to expand...
Click to collapse
Yeah i think this is what its going to come down to. I thought it was worth asking first incase someone knew how to turn just the sound off.
How is this a serious problem? Someone that has cancer has a serious problem.. Anyways, turning off the sent notification in the KaiserTweak didn't work for you? Maybe one of the registry gurus can figure it out.
Click to expand...
Click to collapse
The reason its becoming a problem is mainly down to TomTom. I havent yet bought an in-car holder as i'm waiting for one with a stereo audio jack, so when i use tomtom i rely on the sound as i cant actually see the screen. Yesterday (and many times before) i needed to use tomtom but i forgot the sound was off. So whilst driving i suddenly realised i didnt know where i was going and i wasnt being told. I'm sure you're aware its not very easy to turn the sound on without looking at the screen so i had to find somewhere to stop during rush hour. Not fun.
I have turned off sent notification but it isn't that thats causing the problem it's because O2 send a network alert telling you your credit everytime you've used some of it.
Thanks for all the responses. I think i'm going to give O2 a ring and ask them to turn it off. If anyone knows how to turn just the sound off though it would be really useful.
well, if its just a problem of you accidentally starting tomtom with no sound.....then i suggest you use tomtom starter
http://www.klaes.nl/
it will automatically change you volume to the max when you start tomtom
Hmmm that looks very interesting. Thanks i'll give it a go.
Found a new version on Modaco...don't know whether anyone noticed:
http://www.modaco.com/index.php?automodule=downloads&showfile=2400
Kaiser Notifications (for HTC Tytn II*)
Version 2.02
* This should also work on the HTC Touch Cruise, please let me know if you try it and it works okay. Works with Windows Mobile 6.1 and the .NET compact frame 2.0 or 3.5.
Version 2.02 - Fixes an error relating to date time parsing when using certain cooked ROMs. If you do not have this problem no need to upgrade.
Whats new in version 2.0?
Audio and vibrate reminder alerts for new items
Version 2 now allows you to add audio and vibrate reminder alerts for unread items. Most mobile phones do this and I started to miss this on the Kaiser. Mobile phones will intermitently beep/vibrate if you have new items but haven't seen them, whereas Windows Mobile generally sounds once when the item arrives but gives no additional sounds after that and leaves it to a flashing LED to get your attention. With this version your Kaiser will play a wav file of your choice and/or vibrate every so many minutes for new items.
To avoid battery drain and annoying those around you in your absence, the phone will increase the time span between reminders, the default is: Item arrives, phone alerts as normal. If after 5 minutes you haven't read the message, it will play the selected wav file and/or vibrate. If the message still goes unread it will then alert again after waiting for 10 minutes, then it will alert after a wait of 15 minutes, then 20 minutes, all the way up to 60 minutes, where it will then alert every hour. These settings are configurable.
Off schedule
You can now set a period where the Kaiser Notification program should not interupt you, typically this would be used for overnight. LEDs stop flashing, and no alerts are played for unread items. You can also select to turn the mobile phone off during this period which is great for saving battery power and knowing you are not going to be woken by a ringing phone.
What's fixed?
When roaming onto networks the LED will now flash normally.
What's still broken?
I've had no joy finding out how to flash the LED amber. You may still select amber as an option, however it will flash green. Hopefully I will get to the bottom of this soon.
As per a few requests I have not been able to adjust the flash rates for the LED, or have them light static while charging.
Installation Instructions
The program must be installed on 'Device' to work, it currently does not work if installed on storage card.
1) Copy the cab file to the device and run it. Install to device and not a storage card. If you have the first version it will be removed automatically.
2) From Programs click the new icon for 'Kaiser Notfication Setup'.
3) On first running the setup program the LEDs will automatically be set to the pre-defined defaults, change as required. Set up a schedule and reminder alerts as required.
A link is placed in the Windows/Startup folder during install that will ensure the tiny program that controls the LEDs is loaded automatically when the Kaiser is soft reset or turned off and back on.
Uninstalling
Use Remove Programs to uninstall. After uninstall a soft reset is necessary to get the LEDs flashing as per the original HTC settings.
Other Information
Once this program is installed the LED will not light steady during a charge. This functionality will of course be restored after uninstalling.
Wi-Fi isn't indicated with this program as the device needs to be on to have Wi-Fi enabled anyway so you can see the connectoin status on the display.
Scheduling Mobile Phone to Turn On
(Update: On Windows Mobile 6.1 ROMs with Radio version 1.64.08.21 this is no longer an issue) If you set a schedule and select to turn the mobile phone on at the end of the scheduled period, please note the Kaiser will come fully on before timing out and going back to standby. This behaviour I can not change and is triggered by the radio chip. Please be careful if using this as option as when the phone turns on it could be subject to accidental button presses, and of course I can not be responsible for any charges you may incur if the phone accidently dials out.
alert/vibrate reminders
The alert/vibrate reminder is silenced as soon as you read one or more unread items. You do not need to read all unread items to silence the alert/vibrate reminder. The idea of the reminder is to get you back to look at your phone for new items that have arrived but you have missed, once you read a single item the reminders are cancelled as it has done it's job of getting your attention. Should any new items arrive afterwards, the alerts will start again.
Sound files
You may select any wav file for the alert sound. Only wav files that are in the Windows folder are supported. You may of course add a wav to the Windows folder to use your own sound.
Any problems let me know in the support forum. Enjoy.
Click to expand...
Click to collapse
I've had it forever, and I'm using 2.02.
I was hoping this was a new version, KN doesn't work 100% with WM 6.1.
khaytsus said:
I've had it forever, and I'm using 2.02.
I was hoping this was a new version, KN doesn't work 100% with WM 6.1.
Click to expand...
Click to collapse
Hmmm... I couldn't find it on the forum and therefore posted it (knowing it was dated march 2008). I've used the 1.0 version up to now, did you try it with that version because I have no issues with it on any ROM I tried (and I try them all, almost ROM update weekly).
Regards,
Nika.
This version is there from 3.5.2008. I am still waiting that he will resolve some issues about the led flashing.
nikagl said:
Hmmm... I couldn't find it on the forum and therefore posted it (knowing it was dated march 2008). I've used the 1.0 version up to now, did you try it with that version because I have no issues with it on any ROM I tried (and I try them all, almost ROM update weekly).
Regards,
Nika.
Click to expand...
Click to collapse
No, I'll try to find the older version. This one basically works, but I think I *only* get one LED notification after that.. It's very odd.. if I have SMS set to Blue and Email set to Green, and I get an email first, I'll get a green blink. After that I'll only get a green blink. After a soft reset, if I get an SMS first, I'll get blue blinks after..
Never any left blinks, such as missed call etc..
But at least it doesn't blink forever like nueLED did, and it'll uninstall without leaving junk all over. Also it doesn't blink incessantly and still works with TomTom, so I continue to use it... but I'll try v1.0
@ Mikulec
Which blinking issue do you mean exactly?
When your Leds wont stop blinking after receiving a new SMS/MMS just try these.
Go into your registry:
HKEY_CURRENT_USER/System/State/Messages
There are Folders named SMS and MMS, in these Folder is another Folder called unread.
There is a key called Count, set it to zero in both folders and the leds will stop endless blinking.
Cheers
Damn,
I read your post 2 or 3 days ago, thought I'll give a try cause I was searching for such an app (switching off sounds for specific time periods, i.e. in the morning to use SpoonAlarm, which uses a "notification" before activating, sort of iritating when still sleepy ).
Then I forgot and needed 30 minutes of intensive forum search to put my hands on it . I try it now, thanks for the tip.
EDIT: damn the led system isn't handling amber at all, not even when the phone is charging, that's lame :-/. And you can't do w/o it seems. I wanted this "scheduled switch off notification" .
i will keep my post short
"KaiserNotifications is must to have in Kaiser"
I have a Tilt and I don't know if my phone is the problem or what? but I cannot select "blue" for Bluetooth or "red" for unread SMS. I know there's an issue with the amber light, but my phone is only blinking green and nothing else, no matter what changes do I make. Is this software 100% compatible with the AT&T Tilt?
Thank you, brother. it is useful
TU...
But after 1 month using I instal nueLED and for me it's the best software..
i can't see amber color any more
I Installed KaiserNotification v2.02 but i can't see the amber color any more, i can see it only when it charges and before entering windows.
Is there any solution in registry?
Thx in advanded
nice prog nikagl! Great Work!
sdlopez83 said:
nice prog nikagl! Great Work!
Click to expand...
Click to collapse
It's not mine, it's created by a Modaco user:
http://www.modaco.com/user/262569/phil-uk/
Regards,
Nika.
I've flashed my 8925 twice and hard reset it once, I've tried with and without having allowed the ATT customizations, and still there's a bunch of stupid little crap that is driving me nuts. Please note: these bugs are with no additional software installed.
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Missed calls / call log badly broken: I'll get the missed call notification but when I try to see the caller it shows the log as empty, and when I go into the log manually from the phone app it also shows empty--doesn't even have my outgoing calls.
Voicemail notification got stuck on. I can probably call ATT and have them fix this on their end in minutes but it's bloody annoying that my phone's been notifying me of a long deleted voicemail message for days.
Anybody else having any of these problems?
Anybody know a fix for any of them?
I've already tried advanced_configuration, no great help there.
What's the latest/best cooked ROM? I like that the official has stuff like Voice Command and Sprite Backup, would like to keep them...
I haven't noticed any of those problems. I have however had problems with the phone being really sluggish at times. Still testing with no apps installed. I don't have the backlight problem. I have just used the settings in Kaiser Tweak and everything is working. Not sure that I will keep using it though. I will probably go back to Hyperdragon's newest ROM's. Those always seem to work really well for me.
No issues with the official AT&T ROM either.
wmg76 said:
I have however had problems with the phone being really sluggish at times.
Click to expand...
Click to collapse
Are you using the right SPL?
I did not try the rom. But I heard cleartype w/ landscape problem still exist w/ this rom (like the official HTC 6.1 rom). It could be fix by replacing the ddi.dll but will probably break Opera mini 9.5.
Problems??? Pull up a chair! First I installed the ROM and none of my would work. I couldn't connect to the internet. I downloaded the ROM again and reflashed it. This time icons started disappearing on my phone. I did a soft reset. Nothing. Did a hard reset. Nothing. I reflashed. Loaded my apps, they actually worked. I set up my email, and I could connect to the internet. Great! Finally! One hour later, I got a phone call, but my phone didn't ring. Huh?Anyway, answered it, when the other party spoken it came out the speakerphone. I checked my device and there was no sound: ringtones,music games,alarms. Soft reset...Startup sound played..loaded up and no sound. Call ATT for a help, they decided to send me a replacement. Bad device, I guess. So I redownloaded the ROM and tried a different phone( i know, i know), can't get email to work, can't get MMetrics work. I quit!I will be going to custom ROM! I have a lot of reading to do.
Been using the new AT&T Rom since it was released and not having any issues. The only minor problem I have is that I'm seeing some compatibility issues with the version of S2U2 that I am using. Otherwise, good to go.
I don't get how people are having problems with this. Everything works flawlessly with me.
Except threaded messaging sucks, but with Kaiser Tweak, I turned it off.
I have had only 3 major issues with this rom.
1: Camera works, but doesn't show anything on the screen. I have a black screen, press the capture button, and I get a picture, but I can't tell what I am looking at until I take the picture. Working on this issue now. [Update] I just installed HTC Camera v5.04 b29195.00 http://rapidshare.com/files/99227062/HTC_Camera_v5.04_b29195.00__PPC_.CAB . Works Perfect now!
2. Battery life was HORRID! After 10 minutes I was down to 90%, while it sat on the desk, screen off, nothing running. After switching from 1.65.21.18 to 1.65.21.14, life was peachy. 8 hours with normal usage and only down to 80%.
3. Blue Tooth drops erratically. I connected my bt headset to the phone, made a call, after 10 or 15 minutes, it dropped the headset. BT stayed turn on, but headset couldn't be found. Turned off headset, turned back on, magically found. Haven't figured out what is causing this, but am researching that as well. OK, So I got on HTC's website to see if there was an update. There is no update for BT for the Tilt WM6.1. However, there is a fix for TYTN II WM6.0. http://www.htc.com/europe/SupportDownload.aspx?p_id=13&cat=0&dl_id=60. I decided to try this fix, installed thinking I would get the whole "this program was built for a previous version" garbage, but I didn't get that. Anyway, I am going to try this tomorrow when I make my calls. I will update if I notice it fixes my issues.
Otherwise, it's fast, good signal, good sound quality, etc. Overall I am pretty happy. Will be happier when I finally get the BT to stop dropping, as I travel a lot and it's illegal to talk on the phone w/o a hands free on any military installation.... Sorry if I didn't answer any problems others are having on this actual forum, but maybe someone else will be having the same issue and see my posts for my fixes. Thanks!
zip, zero, nada.......UI is faster, apps are faster, threaded SMS is really nice to have, MSVC works as advertised with my JB2.
Different Alarm Sounds!!
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?
eltrebor said:
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?
Click to expand...
Click to collapse
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.
I upgraded as soon as it was available and am seriously considering going back to the old WM6.0 ROM, which worked well. I have had several lockups and had to soft-reset. I have also had problems with calls. Once, it rang and shoed me the call, but wouldn't let me pick it up. Other times I have had echos. GPS lock time is also much longer. Oh, yes, the equalizer in TCPMP creates terrible distortion. It worked great in 6.0. And I am using the recompiled version.
It is great to get results of satisfaction with the new ROM, but I personally would like to know, for those who have been having problems and those, answers to some questions:
1 Which SPL
2 Which radio
3 Activesync or POP for email
4 Bloatware installed or not
5 PIE or other browser
I am sure that there are others, but those are what come to mind for the moment.
No Problems Here
FWIW, I think my Tilt is running much better with the new ROM. I've only had it (the new ROM) for a couple of days, but TT7 and Google Maps seem to run faster, and It seems to detect WIFI networks MUCH faster than with the old ROM. I'm a happy camper, at least for now.
I've noticed that its been alot slower and I don't like having a button devoted to the ringtone volume. The other HTC Tab I was using that was supposed to be an official use had Music allowing me to access Windows Media very easily now I can't. I also noticed my dialing pad is different and not the same as it was. I also don't like the threaded SMS on Windows Mobile it doesn't suit it. It makes it look very confusing and also I've noticed it has problems moving the screen upwards so that I can see what is being written in the space. Another thing I notice is randomly the HTC Home screen cuts itself off cutting off portions of the tab information. Its something to get used to but I don't see it happening cause I can't figure out what happened to some items on the phone like my GPS doesn't work, I am experiencing worse internet problems than before, Wifi dies frequently, and the dialer doesn't seem to work like it used to. Its a disappointment.
NotATreoFan said:
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.
Click to expand...
Click to collapse
Which key? I have been hunting... and no luck so far.
Backlight timeout linked to lock??
When I re-downloaded the software and re-flashed a *third* time things seemed to work better. The only thing I did differently was skip the 'setup a password' that last time I flashed.
The phone worked pretty well all weekend, and then this morning I finally put in owner info and set a pin password.
And I just noticed the backlight has started dimming after 10 seconds (or less) again. Restart didn't correct it, nor did changing the setting in advanced config so the screen doesn't dim for unlock screen.
For now I turned off lock and went into the backlight tab and it's stopped doing it. BLOODY ANNOYING. I've seen mention of the backlight timeout bug in other forums too...
Even while the phone was working well over the weekend I noticed that fairly often the first attempt to bring it out of standby flashes the screen on then it goes back off, comes on and stays on when I press power the second time.
I ran into the idiotic bug where text is white on white when in landscape mode, know I saw something about that being a cleartype bug or something and there being a fix, but why the hell would it be released like that?
Also, I can NOT get the 'message sent' notification to disable... does 'advanced config' not actually work?
Buggy is an understatement!
Having been unable to bear/ignore the bugs I reverted back to 6.0
Here's what I along with you guys have issues with.
1)Ringtones revert back to it's default tone whenever I open: Settings>Phone
2) Back-light reverts back to 10 seconds at random and often.
3) Google maps will not display letters when searching for places, but it'll invisibly type
4) Typical freezes on pages and things of that nature
5) Bloatware..
SeekerJBP said:
Which key? I have been hunting... and no luck so far.
Click to expand...
Click to collapse
I'll help you out here
Go into HKEY_CurrentUser --> ControlPanel --> Sounds --> FileSizeLimit ( it's a DWORD value)
Just delete the DWORD value, and bam, enjoy .
EDIT : wow, just realized this is my first post. I've been browsing the site since the Tilt came out, but I guess I've never found it necessary to post. haha!
TheCritic said:
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Click to expand...
Click to collapse
I have the exact same problem with my 8925. My work buddy across the hall does not have this problem with his 8925. Running WM6.0 my screen has ALWAYS dimmed at boot, as well as after a call ended; his has never done so. Now, after we've both upgraded to WM6.1, I have all my same problems, as well as the additional 10 second auto dimming that I did not encounter with WM6.0, he still has none.
No matter what settings I change, no matter if connected to power, USB, or none, my screen dims after 10 seconds. I can get it to temporarily revert back to the setting of my choice, by going into the settings and then back out, but if I manually dim the phone, get a call, or pretty much anything, it defaults back to the automatic 10 second dimming. I'm so pissed off about this. S2U2 also automatically kicks in on every screen dim, so I can't use it while the dim prob is going on. Certainly someone within this HUGE base of geniuses has a definitive answer for this.
Lots of little bugs in this release.
Google maps doesn't like it.
Can't get TCPMP to work.
Gets sluggish.
MSVC doesn't notify.
Other things I can't think of now.
Pretty irritating to say the least.
The notification light/led only blinks for about 5 minutes. Because im not looking at my phone every five minutes, i often miss the notification. Why only make it blink for 5 minutes? It defeats the purpose of a notification led if it doesnt notify you when theres something going on. So... Is there a way to make it blink until the notification is cleared?
OMG, you not got a faulty device are you? Because this does sound really ridiculous - I mean, what, I leave my phone on my desk for 10 mins, then I come back - and see no LED blinking because its already stopped?
I have almost decided on getting One, but this ridiculous "feature" just totally bummed me....
I'm pretty sure it's 5 minutes by design. My One X + is the same way. I called HTC and they said yes, 5 minutes by design. If I recall, no one could find an app either that would extend the time.
But surely it must be changeable by tweaking the kernel driver (one that works with LED hardware)?
Maybe some custom kernels patched this?
Ingvarr said:
But surely it must be changeable by tweaking the kernel driver (one that works with LED hardware)?
Maybe some custom kernels patched this?
Click to expand...
Click to collapse
any solution for this yet? this is a huge annoyance for me too. doesn't make any sense that this would be the design...
I've installed an app called 'Easy Reminder' (by Edges Labs) off the Play Store - with this active, the LED blinks for at least an hour for missed calls and unread SMS. You can set audible reminders for calls and SMS, going up to 'infinite' repeat, and this seems to keep the LED alive as well. I've set it to infinite but not tested it past an hour. Also, for missed calls only, in the app you can separately set the LED to blink, but I've not activated that as the LED blinks natively anyway - regardless, the LED still blinks for at least an hour for both calls and sms.
The app hasn't been updated since Jan 2011 but seems to work fine - also, someone resolved the same problem on their HTC One X a while back (HTC One X forum) using a different reminder app, so perhaps other similar apps will work the same.
Hi!
As i wrote, the screen just turning on without doing nothing.
I'm not touching...Only move it within my palms and the screen turnes on.
Anyone heard about that?
Your help would be appreciated.
Thank you!
It's called ambient display. Makes your screen turn on when the phone is moved after your screen turns off.
Basicly a replacement for the lack of a led light(talking non rooted non custom rom here)
OR.. it could also be an app, thats turning your screen on. there are many apps that do this, you should read your apps permissions.
Just turned off ambient display.
But...does it mean that now I wont get any notifications during phone at sleep?
Tnx!
Ambient display doesn't use much extra battery, it only illuminates the pixels its displaying and it keep the phone in a low power state.
It is your phone's stock visual notification system, so yes if you turn it off you won't get any visual notifications. If your phone is set to vibrate or make notification noises it will still do that. The phone does have an LED behind the speaker, so if you are rooted you can install something like lightflow to use your phone's LED for notifications instead/as well.
scryan said:
The phone does have an LED behind the speaker, so if you are rooted you can install something like lightflow to use your phone's LED for notifications instead/as well.
Click to expand...
Click to collapse
If you mentioned 'lightflow':
Yes, I am rooted and followed the tut for lightflow - But I still doesnt get LED notifications.
Any reasson why?
Tnx!
shabydog said:
If you mentioned 'lightflow':
Yes, I am rooted and followed the tut for lightflow - But I still doesnt get LED notifications.
Any reasson why?
Tnx!
Click to expand...
Click to collapse
I don't use light flow, but I have heard of many having issues using that app. what I use is s ROM that allows for colored notifications, then I set my colors within the ROMs options. BTW, pure nexus ROM.
simms22 said:
I don't use light flow, but I have heard of many having issues using that app. what I use is s ROM that allows for colored notifications, then I set my colors within the ROMs options. BTW, pure nexus ROM.
Click to expand...
Click to collapse
oh snap, I just realized this is the same guy who was posting in the lightflow tutorial thread and was told how to do it multiple times.
He does not have "run all commands as root" check in the settings, and insist its not an option. He just needs to go through the settings and enable that like the popup window when you first launch light flow tells you.
You gotta look through your settings man. I don't know what else to tell you, I don't use that app anymore but I have. And unless you go through all the options in the settings menu... The app isn't going to be able to write to the kernels file system to turn the light on.
Maybe I'll just flash the pure nexus ROM.
I just dont get how to use this App.
Tnx!
I don't want to sound mean but if you Cant figure an app out I don't think you should be flashing ROMs
shabydog said:
Maybe I'll just flash the pure nexus ROM.
I just dont get how to use this App.
Tnx!
Click to expand...
Click to collapse
You click settings.... Your looking for something to do with running commands as root.
Did you check under the "device settings and root" menu?
Does he even have the paid version of light flow?
holeindalip said:
Does he even have the paid version of light flow?
Click to expand...
Click to collapse
He said in another thread that he bought it... but that doesn't matter. I don't and I used it via the options I stated to have LED notification for basic stuff.
I have a question regarding ambient display. I know how it works and all that stuff, however, how many time the phone wakes up with the black/white screen? Because mine gets a notification, it shows it to me then without doing nothing it shows the notification again and again, every minute I guess for a long time. Is this normal?
Yes thats normal. Just like a notification LED will stay on, Ambient Display will show every now and again until you acknowledge the notification in case you missed it. Again, it uses almost no battery to do this, I have used the phone with it on and with it off and never really notice a difference.
holeindalip said:
I don't want to sound mean but if you Cant figure an app out I don't think you should be flashing ROMs
Click to expand...
Click to collapse
You will be surprisingly to hear that I do know well how to flash Roms...
scryan said:
You click settings.... Your looking for something to do with running commands as root.
Did you check under the "device settings and root" menu?
Click to expand...
Click to collapse
Reinstalled and after i gave the SU permission - I chose the following:
'Root mode' is on.
'Run every command as root' is on.
Let's see if it would work now.
Thanks!
Hi,
Letting u know that for some reasson i dono - it still just dont work.
Super wierd.