I have tested a few HTC Comm Managers(new black theme. Kaiser style) and low and behold non of them have the wifi working right. I cannot enable/disable it from the comm manager. Anybody find a real working one that does this? Even some that were claimed to be "FIXED" didn't work...
Anyone have a dump of the original also? (stock WM6)
I've got the same problem since the upgrade to WM6. Nothing works: soft-hard reset, upgrade... WLAN doesn't works (since comm manager).
me too...any solution mods?
Same problem here... The default WM6 HTC comm manager is working corectly.
anyone have a cab file of the original? incase i want to revert back to it?
You might find the fix here:
http://forum.xda-developers.com/showthread.php?t=326655&highlight=wing+10+button
What's wrong with it?
I'd tried to install http://forum.xda-developers.com/attachment.php?attachmentid=48832&d=1188607222
And then, the following message: "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system p ermissions"
...
When I try to do the change in registry, a new surprise: in the registry tree, after CommManager doesn't exist "WLAN", but numbers (0,1,2,3... and in 3 there's WLAN). The change in registry: NOT WORK YET!
I've found the problem (maybe...). In folder "Connections" there's not Wi-Fi icon... what it means?
pichetinhas said:
What's wrong with it?
I'd tried to install http://forum.xda-developers.com/attachment.php?attachmentid=48832&d=1188607222
And then, the following message: "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system p ermissions"
...
(
Click to expand...
Click to collapse
SAME THING HERE! No permission to do this! I hope this does not result in a hard reset.
OK, I finally got anew one installed. Even though I tried a fresh install after a reboot, I still couldnt get it installed. So, what I did was start commmanager, Bthen stop it in Settings > Memory > Active programs
REALLY A GENIE!!! I'll try it...
It's Ok! Now, I could installed the comm manager, but it doesn't work... What I must fix exactly?
This is exactly what I did:
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
After all this... The WLAN icon is always off...
Nobody else has the same problem? It's incredible!! I begin to think that I've done something wrong. It has began after the upgrade to WM6... Now, I can't downgrade to WM5 because I don't have the rom WM5 original... :'(
That CommManager dosen't seem to work well. I had problems with it. I found another one that DID work though.
grizzley said:
That CommManager dosen't seem to work well. I had problems with it. I found another one that DID work though.
Click to expand...
Click to collapse
hi, can you please point me to where you downloaded this??
hello
i have the same problem. wifi card not run.
the problem? http://forum.xda-developers.com/showthread.php?t=322225
i d´nt know.
anyone a idea? thanks
Do a search. You will find that you have to edit the settings in the registry for the comm manager.
I have this same problem. If anybody has a cab file of the stock tmo com manager, please post it!
Thanks in advance!
You guys...
Go into the registry and find out what the name is for the wireless adapter is. Take that information and change the adapter that is shown in the comm manager.
Thats really all there is to it.
If youre going to screw with the software, youre going to need to blood on your hands. You cant just throw stuff on the phones and expect it to work.
All right...
On my wing
\\\registry\HKLM\Software\HTC\CommManager\WLAN\<DeviceName>
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETTWLN1
That is the adapter for my phone, might be the same for you.
If youre using the changable comm manager you will have to change the settings for the wlan setup.
\\\registry\HKLM\Software\HTC\CommManager\WLAN\<Default>
\Windows\WrlsMgr.exe
Once again might be different for you.
Im using TouchIT 2.3 my stuff might be different.
I GOT IT
pichetinhas said:
It's Ok! Now, I could installed the comm manager, but it doesn't work... What I must fix exactly?
This is exactly what I did:
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
After all this... The WLAN icon is always off...
Nobody else has the same problem? It's incredible!! I begin to think that I've done something wrong. It has began after the upgrade to WM6... Now, I can't downgrade to WM5 because I don't have the rom WM5 original... :'(
Click to expand...
Click to collapse
If u wanna know your adapter go to
HKLM\comm\tcpip\linkage
mine is SDIO86861 and in linkage folder it is shown ppp SDIO86861
Hope this info helps u
Related
I tried to install dutythroy_black-3g-comm-manager_.cab.fixed and I install it to the SC card. However when I tried to remove that software the Kaiser said that it was no able to remove it and do you want that it been removed from programs list...
Now my comm manager is corrupted and it shows only one choice in the upper left corner.
I already tried to run restorecom.reg but it didn't help. Any way to run original comm manager cab installation or do something else which helps me...
Also... I tried some other Latest cabs like task manager & windows live and both of these says that it hase been mentioned older windows mobile device?? Is this only warning not to be worried or did I something wrong?
Gotta raise this because I have a problem...
Plz... anybody could help me?
Anybody could make a copy what are original registry settings of Comm Manager... if that would help...
PeeHoo, why would you install a core function like the Comm Manager to the SD Card? That's asking for problems like you now have. Do a hard reset and try again.
Thx for wise answer!!
I did so!! But after I uninstall this dutythrow 3g comm manager. if you read my question more carefully you can read what I wrote... However there was mistake of written english (SC was mentioned SD) and word install should be I installed....
This hard reset answer is really nice... anybody really can help? I do know that HR help but I am trying to avoid that...
Unless you can write a cab, or bribe someone into doing, to reinstall the original skin, which I'm sure you copied before replacing right?, you're screwed.
This is where SPB Back up really helps!
You may not like the answers you get, but most of the people here won't lead you astray. Easiest way is to HR. You can try backing up now with SPB & then hard reset. The customazation cabs should replace & stick.
Hi all
I installed the HTC Home plug Based on the Kaiser one. With the Weather Patch
But now I have a strange problem. In the Weather Tab it says (null) instead of High or Low.
Same go's for the Ringtone.
Well the problem is: When I reload the Plug it works. But when I reboot my device it show op (Null) again until I reload the Plugin.
Does anyone know this problem???
Thanks in advance.
Same problem, haven't found a real fix yet but I got a workaround you can try.
After every reset of the device follow these steps.
- Disable HTC Home from the today screen.
- Open HTC Home Customizer
- Change some minor detail (usually selected weather city for me)
- Save
- Go back to today screen and HTC home is there with all language files working magically.
It's a bit of a pain in the ass but I haven't found a better solution just yet. Hopefully someone else can answer this for us but in the meantime you can use my cheap method to make it look right.
You have to rename:
windows\HTCHome.dll.0409.mui
windows\HTC_HDlg.exe.0409.mui
windows\HH_0409_WeatherCities.xml
to your locale variable (if your rom isn't wwe), in my case it's spanish (0C0A):
windows\HTCHome.dll.0C0A.mui
windows\HTC_HDlg.exe.0C0A.mui
windows\HH_0C0A_WeatherCities.xml
It worked for me.
There's another way to do it, harder but way better, i usually do this with my own cabs because after a hard reset i don't like having to change everything again. Steps:
1- Decompress the cab with winrar
2- Edit the file "setup.xml" and correct things you want to change about installation setup: name of files to install (like in this case), name of registry variables to write (like in 10-button commanager for wing), etc
3- Find and download "Cabpack 1.4", be sure to use the following options for it to work: "compression type = mszip", "Create cabinets for = 16 bit extractor"
4- Use it for re-compressing your modified cab and install.
5- Voilá... great pre-modified cabs that you can keep for the next hard-reset.
Hope you like it. Regards
le_hades said:
You have to rename:
windows\HTCHome.dll.0409.mui
windows\HTC_HDlg.exe.0409.mui
windows\HH_0409_WeatherCities.xml
to your locale variable (if your rom isn't wwe), in my case it's spanish (0C0A):
windows\HTCHome.dll.0C0A.mui
windows\HTC_HDlg.exe.0C0A.mui
windows\HH_0C0A_WeatherCities.xml
It worked for me.
There's another way to do it, harder but way better, i usually do this with my own cabs because after a hard reset i don't like having to change everything again. Steps:
1- Decompress the cab with winrar
2- Edit the file "setup.xml" and correct things you want to change about installation setup: name of files to install (like in this case), name of registry variables to write (like in 10-button commanager for wing), etc
3- Find and download "Cabpack 1.4", be sure to use the following options for it to work: "compression type = mszip", "Create cabinets for = 16 bit extractor"
4- Use it for re-compressing your modified cab and install.
5- Voilá... great pre-modified cabs that you can keep for the next hard-reset.
Hope you like it. Regards
Click to expand...
Click to collapse
GREAT! Im gonna try this out now THanks
The First One WOrked!!!!
Ok but you are right...I dont want to do all that again after Hard Reset. So im going to try make a Modifi on this Cab.. Thanks again
Hello and thanks for this help !
But it doesn't work for me. Maybe you can help me ?
I have the same problem with "null:null"
But the files are already named with my locale variable. (I'm not sure)
windows\HTCHome.dll.040C.mui
windows\HTC_HDlg.exe.040C.mui
windows\HH_040C_WeatherCities.xml
The language of my Windows Mobile 6 is in french. But i want to display weather of "Lausanne" in Switzerland (100C)
You say : if your rom isn't wwe --> How can i see if my rom is wwe ?
Thanks a lot for your answers
Finally after the sucessful work of the PV team...we have a working STK for our PPC's....attached is the STK extracted from Sonblacks Rom..
Enjoy and post your feedback ( even if it works or NOT )
Edit : 22nd June 2008
as per request..i have modded the cab file and added the REG keys also..now please try again and post the results..else i have started to learn Porting of ROMs..have extracted Farias ROM..will see later if there is something useful for our device.. ..
I owned a wizard on my 18th Bday ( but blowed the battery off )
Edit : 23rd June 2008
Please try the newly attached CAB file an post your results
im from the phillipines.. using both smart and digitel networks.. this doesnt work for me.. only white blank white screen display..
did the STK work for YOU in Sonblacks Rom
ather90 said:
did the STK work for YOU in Sonblacks Rom
Click to expand...
Click to collapse
never tried the sonblack rom ather.. im using master c_shekhar wm6.1 build 19209..
the STK has been reported to work on Sonblacks ROM..so i dumped the ROM and extracted the STK from it..
No luck yet...
It's not working. Only opens a blank white screen. After setting the STK service to start at startup-and a softreset, the STK UI link in start menu/programs changes to DialogServices which is my network provider. I tried diffrent settings in registry too, but still No luck. Can you add the settings in HKLM/Services/STK_Service too in the CAB. Is there any other Registry modifications that affects STK.
oki doki..will redump the rom again and take out the registery also
New version added..check first Post for the cab
------>
ather90 said:
New version added..check first Post for the cab
Click to expand...
Click to collapse
Still not working.... But try this,
1.Install & restart
2.Open FdcSoft task-mgr or SKtools
3.Go to services section. You will see a service named Stk_Services. This is in automatic mode, but stopped.
4.Start it.
5.Now click the start menu shortcut. It may still show a white screenin the first time, but notem the soft-keys are now labeled.
6.Exit from it and clic again.
7. NOW IT WORKS. But when clicked on something in the second level menu, it gives a error message
"sorry, service is unavailable. Error:FF03"
Still something is missing. I think the best method available is to build our rom on the PDAVIET rom.
these files are extracted from PV rom it self..now i know it cant be the Enviromental Difference ..what could be the problem..will try again the Registery
ather90 said:
these files are extracted from PV rom it self..now i know it cant be the Enviromental Difference ..what could be the problem..will try again the Registery
Click to expand...
Click to collapse
I dumped the PDAVIET rom and searched the registry for anythink related to STK, but I failed. Looking forward for a good solution from you. Sir, how can I set the STK service to autostart & keep working at startup? I tried in the registry manually and with FdcSoft Task Manager. It says automatic, But still I have to start it manually after each restart.
tell me one thing..when u "Start" the STK..can u tell me whaat does the following registery shows you
HKLM/Services/Stk_service/
Keep =
tell me whats the value of keep after u start it
after i installed the STK2.cab, it autatically restarded the phone, open my program folder and saw that there are two STK link.
one is the original "myservice" Menu
and the other one is STK UI
i clicked the new link program bt unfortunately, the same appearance that i see everytime i open my last link of STK program. There are only white screen and "STK Service" at the top.
here is what happened asther. hope that it will help you making the updated cab for STK..
thanks for the Info.btw
the names ather
ather90 said:
tell me one thing..when u "Start" the STK..can u tell me whaat does the following registery shows you
HKLM/Services/Stk_service/
Keep =
tell me whats the value of keep after u start it
Click to expand...
Click to collapse
HKLM/Services/Stk_service/
Keep = 1
(But this is independent of the status of the service. No matter it is STARTED or STOPPED, the 'keep' stays in 1
lols..
sori... it reminded me of something.. ahehehe.. its a typo error..
shiranmotha said:
HKLM/Services/Stk_service/
Keep = 1
(But this is independent of the status of the service. No matter it is STARTED or STOPPED, the 'keep' stays in 1
Click to expand...
Click to collapse
hmm..i gues i will have to try some thing else..will see what i can do
what is the update for this cab?
ahehe..
sori for being impatient.. ahehehe..
ciao!
What about this...?
ather90 said:
hmm..i gues i will have to try some thing else..will see what i can do
Click to expand...
Click to collapse
Can we use this in some way to work in our Hima...?
http://forum.xda-developers.com/showthread.php?p=2329551#post2329551
will see this..once i confirm that third version is not working
Third virsion released
I've been trying to install Internet calling on my diamond, while I managed to get the VOIP working using the WM6VOIP (ftp://xda:[email protected]/Hermes/WMXL_Support_Files/WM6VoIP.CAB) cab file and SIP Config, another problem showed up. I have tried even the last WMVOIP+SipConfig CAB package with the same results
The moment I install the WM6VOIP cab, the internal GPS function goes dead - it does not work anymore. Soft reset will not fix the problem.
It took me 3 hard resets to figure what exactly was causing the trouble
I guess the WM6VOIP cab overwrites some system files and/or registry settings vital to the GPS Receiver
Is there anyone who had the same problem or anyone who tried to enable Internet Calling on HTC DIAMOND. Any solution to this?
Same here
I had the same problem. Hard reset to fix it.
Something in the VOIP installation makes the GPS invisible to any app which tries to use it. Even the QuickGPS app would not work.
Too bad...I would love to have the VOIP option..but not over GPS.
same problem here
So THAT'S why my GPS stopped working! Jeez! I think we need a new CAB of VoIP software from WM 6.1.
EDIT: Has anyone tried this one?
http://forum.xda-developers.com/showthread.php?t=401608
adamz said:
So THAT'S why my GPS stopped working! Jeez! I think we need a new CAB of VoIP software from WM 6.1.
EDIT: Has anyone tried this one?
http://forum.xda-developers.com/showthread.php?t=401608
Click to expand...
Click to collapse
Nevermind. That one breaks GPS too and can't be uninstalled. *sigh*
same here... did you installed it manually or by a pack (containing sip config tool, gsm codec, bass fix and internet calling) ?
I installed the pack... and my gps died... but not on my HTC trinity.
Someone should install all the packages manually, one by one , and see how it goes.
Please post your findings.
Unfortunately I'm in the same boat :-(
daren1 said:
I had the same problem. Hard reset to fix it.
Click to expand...
Click to collapse
But I found solution:
Rename in windows directory following files:
\Windows\dnsapi.dll
\Windows\ipdialplan.xml
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
\Windows\ringback.wma
Delete all registry changes made by instalation which is described by author in post #66 in http://forum.xda-developers.com/showthread.php?t=401608&page=7, reset diamond and if you want you can delete now files which was renamed in previus step.
After that go to settings->System->External GPS->Access and remove tick from "Manage GPS automatically". After that confirm with OK and go one more time in the same place and turn it on "Manage GPS automatically". I'm not sure that this change are nessesary, but now I have working GPS whitout hard reset.
Hi, i've got the same problem after installed wm6voip.
Folowing philipZ post, i've just renamed
dll files with total commander(hidden files) and reset diamond, the gps worked again
I've not tryied voip anymore....
Just Renamed, no registery changes:
\Windows\dnsapi.dll
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
http://forum.xda-developers.com/showthread.php?t=415262
tof42 said:
Hi, i've got the same problem after installed wm6voip.
Folowing philipZ post, i've just renamed
dll files with total commander(hidden files) and reset diamond, the gps worked again
I've not tryied voip anymore....
Just Renamed, no registery changes:
\Windows\dnsapi.dll
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
Click to expand...
Click to collapse
I'd like to rename that files but I can't ! I use totalcommander but when i change name, nothinghappens and the ile get its name back !
Please help !!
Thx !
how to rename dll files
hi guys, like wanabo, i cannot rename any ROM file under \windows. i tried to use the default file explorer, total commander and resco explorer...no luck. every time i try to rename the dnsapi.dll file i get the error 'access denied'.
please can someone help?
thank you
Does anyone have this .cab file?
I tried to search, but no .cab file seen.
USBToPCPopUp 2_2_18191228_0
Here the older version: http://forum.xda-developers.com/showpost.php?p=2652987&postcount=10
Thx.
xmoo said:
Does anyone have this .cab file?
I tried to search, but no .cab file seen.
USBToPCPopUp 2_2_18191228_0
Here the older version: http://forum.xda-developers.com/showpost.php?p=2652987&postcount=10
Thx.
Click to expand...
Click to collapse
I searched google - http://www.4shared.com/file/59922883/248789eb/HTC_Diamond_USBToPCPopUp_10181434321.html
jymbrittain said:
I searched google - http://www.4shared.com/file/59922883/248789eb/HTC_Diamond_USBToPCPopUp_10181434321.html
Click to expand...
Click to collapse
I need the QVGA. Or is this a universal ap.
I need to pls
Up pls...
Pls i need this cab
Dude.... you will get it, you will see (no, not a cab)
There is No USB to PC Pop Up Universal Cab.
As i have understood from research by NFSFAN.
To get this working on specific devices it need specific values FROM that device to be added to the installation.
Hi,
Sorry to crosspost but I have a problem related to UsbToPC:
I am using a custom WM6.1 ROM on a Kaiser.
When I used to plug the USB Cable I had a nice window opening which allowed to choose "ActiveSync" and "Internet Sharing". I think this is the HTCUSBToPCPopUp program.
The problem is I inadvertently clicked the "never ask again" box, and of course the pop up does not appear again... How can I enable it back?
I looked through the registry and the HKLM\Software\OEM\USBtoPC keys seems fine:
AskConnect: 1
Device_Type: 2
DisablePopUpUI: 0
EnableAdvanceChecked: 0
SyncMode: 1
Thanks for your help.
Reply With Quote
where can i get this soft????
Cab required
Anyone who can upload the latest version?
Found this but I think it's only VGA?
http://forum.ppcgeeks.com/showthread.php?p=446304
Is there a QVGA version of this anyway?
Andy
Or is there anyother app to hook my storagecard up2my carradio as a mass-storagedevice?
usbtopcpopup
enodr said:
Hi,
Sorry to crosspost but I have a problem related to UsbToPC:
I am using a custom WM6.1 ROM on a Kaiser.
When I used to plug the USB Cable I had a nice window opening which allowed to choose "ActiveSync" and "Internet Sharing". I think this is the HTCUSBToPCPopUp program.
The problem is I inadvertently clicked the "never ask again" box, and of course the pop up does not appear again... How can I enable it back?
I looked through the registry and the HKLM\Software\OEM\USBtoPC keys seems fine:
AskConnect: 1
Device_Type: 2
DisablePopUpUI: 0
EnableAdvanceChecked: 0
SyncMode: 1
Thanks for your help.
Reply With Quote[/QUOTE
I had the same problem. To fix it (and fix activesync) go to programs/usb to pc which brings up the interface check/uncheck ask when I connect option on bottom. you may also disable the fast sync option (i did both and now I can use activesync)
with beer
retromad
Click to expand...
Click to collapse