I tried to install dutythroy_black-3g-comm-manager_.cab.fixed and I install it to the SC card. However when I tried to remove that software the Kaiser said that it was no able to remove it and do you want that it been removed from programs list...
Now my comm manager is corrupted and it shows only one choice in the upper left corner.
I already tried to run restorecom.reg but it didn't help. Any way to run original comm manager cab installation or do something else which helps me...
Also... I tried some other Latest cabs like task manager & windows live and both of these says that it hase been mentioned older windows mobile device?? Is this only warning not to be worried or did I something wrong?
Gotta raise this because I have a problem...
Plz... anybody could help me?
Anybody could make a copy what are original registry settings of Comm Manager... if that would help...
PeeHoo, why would you install a core function like the Comm Manager to the SD Card? That's asking for problems like you now have. Do a hard reset and try again.
Thx for wise answer!!
I did so!! But after I uninstall this dutythrow 3g comm manager. if you read my question more carefully you can read what I wrote... However there was mistake of written english (SC was mentioned SD) and word install should be I installed....
This hard reset answer is really nice... anybody really can help? I do know that HR help but I am trying to avoid that...
Unless you can write a cab, or bribe someone into doing, to reinstall the original skin, which I'm sure you copied before replacing right?, you're screwed.
This is where SPB Back up really helps!
You may not like the answers you get, but most of the people here won't lead you astray. Easiest way is to HR. You can try backing up now with SPB & then hard reset. The customazation cabs should replace & stick.
Related
I'm just starting to get into the depths of my PDA2K and this site is GREAT!!!!!!! Since I'm just one step up from "The Village Idiot", I have a couple questions for all you pros.
After reading about using the extended ROM, and unlocking it and seeing what's in there, I think I've figured it out. Whatever CABs are listed in the config file will be installed upon a hard reset....correct? If true, and since I have only 3.5MB left in Ex ROM, can I put the other CABs I wanted installed in say /storage/CABs, list them in the config file and upon a hard reset they will be installed? Is there any reason to put them into Extended ROM rather than Storage? Is it alright to put CABs in from like games, Resco Explorer, WebIS Mail, etc.? Lastly is there a way to set the programs up where I don't have to go back and enter all the registration numbers again?
Thanks a ton for your help!!!
Tom
In extended rom they are not taking up your precious storage space on the device.
cruisin-thru said:
In extended rom they are not taking up your precious storage space on the device.
Click to expand...
Click to collapse
is it possible then to keep the installation cabs on storage card,
and also, can that path be set in the config file in ext rom?
what happens if a particular cab is not found after hard reset?
is the installation stuck or it just gives a warning and keeps on going to the next cab listed in the list.
Have a read of this
http://forum.xda-developers.com/viewtopic.php?p=83119#83119
It might be a bit to deep but should help you along the way.
1) You can keep a cab anywere you want
2) make sure your cab is read only as it can delete itsself after install.
3) to run a auto install from a differnet storage place you need to hack the reg (see thread).
In all if you have a sd card you could leave your EXt rom empty.
Hack the reg to the new postion and run the Autorun from there.
Have fun
Thanks for all the infor everyone! From what I've read in other threads I need to make sure that TPdisabled is set to off so that when programs like WebIS Mail and SplashID get installed I can touch the screen to make sure they install into the right place and other things. Correct? If this is correct, should I just remove TPdisabled all together?
Thanks again,
Tom
TPdisabled can't be set off, its either run or not run. So dump it and you wont have a problem
MDAIIIUser - Thanks for the link! I looked at it and you're right, it's pretty indepth and I'll have to read it more closely at a later time....like at work.
Question1: leochan2005 had a follow-up saying "why not use backup"? While I agree this would be easier, I'm assuming that by using your method one would get a much "cleaner" install than backing up all the crap that was on the system prior to the hard reset...correct?
Question2: It took me a long time to get my TMo settings setup on my PDA2K and I don't want to go thru that again. Is there a way to backup those settings so that they can be auto-configured at a later time? I read about making a personalsettings.CAB but haven't done it yet.
Thanks,
Tom
MDAIIIUser said:
TPdisabled can't be set off, its either run or not run. So dump it and you wont have a problem
Click to expand...
Click to collapse
Thanks! I take it it should be at the beginning of the config file so that I can access it. Correct?
q1)
Well the short of "why not use backup" is you can if you feel that:
1) Restoring Regedit values from a lower rom version
2) Restoring system applications form a lower rom version such as BT
are called for, wanted or even needed.
I fail to see that point as a upgrade is an upgrade and a backup is a backup. Now you could do a restore of your system data also (which you could also sync and that would be clean
Q2)
Most fo those settings are part of T-mobile.cabs found in Extrom, the rest would have been reg entries that you are going to have to hunt for and copy.
So sorry no way around reading the other thread (personalsettings.CAB)
MDAIIIUser - Maybe I should state what I'm trying to accomplish and you could give me a clue as to how to do it. A couple days ago I upgraded by BT on my PDA2K (generic from Expansys) to 1.0.0.3900 (or what ever the latest is) and I'm currently looking at upgrading my radio to 1.12, but that would require a hard reset. I'm not in the mood to go thru all the program installs and SMS/MMS tweaking again, so I'm trying to figure out the best way to get all my programs and configurations back after the hard reset. I thought by incorporating the personalsettings.cab (for my Tmo settings) and your method I would be up and running pretty quickly. Yes? I have Sprite Backup, but I'm not sure if that's going to overwrite anything after the radio upgrade????
Thoughts?
Thanks!
Well my logic (that could be wrong) would say that a restore of your backup would get you to were you are now.
That you would need a restore as you have to do a hard reset after the 1.12 radion install.
But I can't answer the question will the radio be restored as well,
I don't know, I don't know the settings in the backup application, so am sorry I will have to let somebody else answer this one.
When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
The other odd thing is that cant install anything now. I tried to install a cab and I received the "programs was unsucessfully installed". The last program I installed before I noticed this issue was resco. Any ideas, I dont want to try a hard reset. Thanks.
i hjave the same problem!!!!!!!!!!!
Very strange - I have the same issue and it just started today. Installed software won't run and I can't install any cabs. Just says it was unsuccessful.
Anyone?
try downloading pocket mechanics, it shows all programs installed and a clean up tool and see if it shows it there, u can delete them through ur program files....see if that works lettme kno how it goes
Tried soft resetting a few times - nothing. Backed up device to my storage card using Sprite Backup and did a hard reset.
Before restoring I tried to install a cab - worked.
Restoring device now from backup....
After restoration installation of cabs - Unsuccessful. Must be sometime in the registry/system?
My question - what did we do in common to get this problem?
Today I swapped SIM cards with another AT&T phone and then put the original one back. I also ran the JumpSPL1.56KAIS on the device but reset at the tri-color screen due to a lack of time.
It is very frusterating as I dont know what to do. Any since I cant load any programs like pocket mechanics I dont know what else to do. Backups didnt help and I know the ones I had a month back showed the programs listed in the Remove Programs tool. THERE MUST BE A REG HACK THAT WILL FIX THIS! Anyone?
The last programs I installed before this happned was the Resco explorer.
Also I have a activesync issue that started about the same time which I have in another post.
I ended up hard resetting it again and am just re-installing everything.
i ccan't figure this out does anyone can tell me the procedure?
were to download and how to install??
Do a search. on either google or on this forum before asking plz.
This question has been answerd before.
But sins there was no thread that was acualy called like your question ill post the answer and maby next time when someone search they will defenetly find the answer
Go to the link below and download the program and install it on your computer.
When its done it will install it on your phone aswell. (so keep it connectded to the computer while you install it)
http://www.microsoft.com/downloads/d...displaylang=en
Go here
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
If you read the instructions, it will tell u.
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
For now, it's not possible to download directly the cab file from MS site
google for the following files:
- NETCFv35.wm.armv4i.cab
- netcfcfg.cab (saves yourself from editing registry)
You will identify trust-worthy locations easy
Easier than you can imagine.
Search MODACO forum ( www.modaco.com ) NETCFCFG.cab and NETCFv35.vm.armv4i.cab
Install both and you will have a simple application in program menu to choose between net 2.0 and 3.5. DONE
You can also choose to use 2.0 for some applications and 3.5 for other
thnks y´all i found it on modaco, got it worked!!
pls help, I can't install it
it writes: "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I cant even uninstall it, and I get this msg always
"installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution: I kill Kaiser Notification and then I can install .NET Framework without this problem. This app. using .NET Framework.
So I think the solution is in closing/killing all running applications.
What is the "kaiser notification"?
I have the same install error.
Thank you.
i have the same installation error as the last two posters. i tried killing every program i can and i still get the error
me too !......still can not install netcf v3.5 !!
After 2 days searching high & low through internet all discussion session, still can not find a solution. Therefore I made a self tracing and tried all kinds of method, at last I found a solution without doing a hard reset !!
rename mscoree.dll under windows\ to mscoree.dll.txt
re-install netcf v3.5
no more any error code comes up
thats it !!
I am running a tytn II, with the same problem. Install, i get the error. I can't uninstall, atleast not when I try through the 3.5 installer (remove or repair) or the "remove programs" on the kaiser.
I have hard reset the phone 2x,and regardless of whether I am installing from the exe or the cab file on the phone, still get the same error as everyone else.
This past time, i tried changing the name of the mscoree.dll under windows\ to mscoree.dll.txt and mscoree35.dll to mscoree35.dll.txt
same problem. I'm really beyond annoyed. Can someone help?
have a sprint diamond, how do i check which version i have and if its the newest?
it seems like all the programs i try and install say it requires a newer version than the one installed on the device but its only a month old so im not sure.. any help would be great..
thanks!!
I have the same question. I've searched all over and can't find an explanation of what .Net 3.5 is or how to find out if I have it already. I have a Sprint (CDMA) HTC Touch Diamond. Thanks.
I had the same problem on my HTC Kaiser, but I found a solution.
I found a program that acts like safe mode on a computer.
So if you install that program and restart in safe mode (you need to select safe mode when you boot), you will be able to install the compact framework 3.5.
Probable some locked files prevent the normal installation.
The program is an evaluation version, limited to 14 days, but since you only need it for the framework, you don't need to keep if you don't want to.
The app: SafeMode 3
...still not working on my touch diamond.
i've renamed the dll and tried the safe mode app. But I still get the same error.
btw: i have this problem since i installed a cooked rom.
Thanks. Was also having the install issue (I had previously installed and then removed 3.5 but good old ms clearly didn't remove correctly).
Renaming mscoree.dll worked (I tried mscoree2.5.dll before but that didn't work as it was in use so I couldn't rename that).
Glad it worked, was facing dropping back to previous backups or installing a task manager to kill processes (a good task manager program will show all your processes), just to reinstall 3.5.
another thing that goes wrong with the 6.5 wm and tf3d installed:
when you go to the movies, and you put your phone into vibrate, with the left volume keys, the phone goes into vibrate fine,
but when you set it back to full volume, the next time someone calls, it only vibrates, you have to go to: Settings, Sound and change the ringtone manualy to make it ring again...
Sorry, Wrong Forum...
Yes, probably topic #1000 about this. But PLEASE keep reading.
I got the famous WM6 bug/error/whatever.
Symptoms:
- Access is denied error message when trying to copy files to the phone using ActiveSync.
- Access is denied error message when trying to delete any files or copy files between folders and/or the storage card on the phone.
- You do not have permission to download that type of file in Internet Explorer when trying to download any files.
- No programs show up in Remove Programs.
- Installation Unsuccessful error messages when trying to install any applications.
- ActiveSync will fail with an error message that you should start the troubleshooter.
It might have something to do with F-Secure I installed, and tried to uninstall (which ofcourse is impossible, since no programs show up in my installed programs/delete programs list). However, tons of ppl have had the same problem before so it has probably have nothing to do with F-Secure.
Now about the famous fix (which can be found for example here).
It's not working for me. Yes I tried this fix like 10 times, exactly like its written, sometimes a bit different, not using bold but Italic etc etc. I find #12 an inconsitency for example, since shutting it down and THEN doing a soft reset doesnt make any sense to me. Anyway I did like it said, and I still have all the problems I've had before.
My question: is there anyone that has had this bug before and DID fix it, or is there anyone that knows how to fix it after all? Or, last but not least, is there someone willing to rewrite the fix in uber noobish language, step by step, that might help me fix this. I'm quite desperate and totally not looking forward to hard reset my device. Thnx in advance
Some device information:
ROM Version: 1.93.404.1 NLD
ROM Datum: 07/10/08
Radioversion: 1.00.25.05
Protocolversion: 52.29.25.12H
Dutch provider Hi
No new roms installed, flashed stuff nothing. Just tweaks and programs installed.
I'm wondering if I should leave it like it is now and be patient for replys, or move/recreate this topic somewhere more "windows mobile"-like, since it might have something to do with the OS itself, and not just my kind of mobilephone ...
Sorry to hear your problem. I'd came across the problem once and YES the fix doesn't cure all the problem.
Luckily i've backup my PDA using sprite before the problem starts. What i did: 1) Hard reset the device. It will CLEAR ALL the memory and restore to factory default.
2) Reapply my first backup. (if you have it, if not, just reinstall everything). Remember though your backup in activesync might not be sync again! - that what happen to me. Luckily i have a copy in my Hermes.
3) My PDA is back to normal!
4) Careful when you modding your PDA. Just don't get mad to those that tries to help, some might not work on your device depends on what ROM you're/they're using. If anything goes wrong, just accept the fact that its your fault and -ALWAYS- have a backup ready. Just Hard Reset.
And I'm sure you're familiar with the lack-of-a-backup-till-I-need-it thingy ... I'll go mayhem on MSWM if I'm losing my photos and texts ... Contacts I can copy or just rewrite, but damn, my photos :s Thnx for the reply tho.
If you keep it synced with your computer/outlook, there shouldn't be much of a problem.
Ever since my first WM device, I've kept a list of all changed settings, etc. A hard reset isn't really that big of a deal. You do it, reinstall a few apps you had, change some settings from the cheat sheet you keep, sync with outlook, and you're good to go.
Think of your Diamond as a slave device to your regular PC. Sure, you apply a few tweaks to it, but other than that all your data should be on your PC.
Yeah and foto's and text messages and contacts ?? All gone, hard reset not that much of a deal I find it quite frustrating =(
Hey Everyone,
I am running build 217531.5.0.20 ROM on 6.5 on an ATT Fuze.
Today I decided to give the push to talk feature a try and noticed the PTT software was not in this cooked rom so, I DL it from here: http://forum.xda-developers.com/showthread.php?t=446652
I installed into the Storage Card not the device and SR. The cab installed no problem but, I am not getting the program so, I thought I would reinstall it. Now, it tells me that it detects the previous version and wants to uninstall the old one first. It asks me if that is ok and I say yes then, it tells me it can't. Continue anyway? I say yes and it fails.
So then I turn off TF3D and SR. Try again and nothing. THen I try a SR and from the beginning, I try to isntall in the device and tells it asks me if I want to remove the old and I say yes, then it says it can't and asks if I want to conitnues anyway, I say yes and it fails.
Does anyone know how to remove the PTT so I can try again?
There is no PTT registry in the HKLM, I have searched for it and all it finds is the remap keys. I used total comander and can not find any of the files or folders for it to remove it on it's own.
Any help is appreciated in advance...
THANK YOU!
UPDATE*********
Ok, so I found the rstry key in the HKLU/Software/HTC/PTT and I removed it. No change even after a SR.
most straightforward, how bout a hard-reset? since backup with messages and calls are easily done wif PIM backup.
Uh, was the ptt button mapped to something useful prior to trying to install the ptt cab (I'm thinking it had to be). You're problem is that you already had the ptt button mod in rom, I suspect. Look in \windows for long_ptt.lnk and short_ptt.lnk. You may not be able to install ptt, but if you do, definitely do it to main memory.