Hi,
Can someone please navigate to windows\startup on your Tilt using a program like total commander and name all the files you have in there?
Please be sure to allow viewing of hidden files.
Thanks,
iboj007 said:
Hi,
Can someone please navigate to windows\startup on your Tilt using a program like total commander and name all the files you have in there?
Please be sure to allow viewing of hidden files.
Thanks,
Click to expand...
Click to collapse
The contents of the Startup folder depends on what you have installed.
I have: btdwake, enAlarmPPC, PKG, poutlook, and sddaemon
Just wondering why you need this information!
I installed the Touchflo cube cab and it didn't work, so i'm trying to uninstall all traces of it.
Related
Guys,
I have tried to install PHM Registry Editor, i used the desktop installer and that did not work. Can someone please point me to the correct cab file i need to use for wm6.
Thank you.
http://www.techspot.com/downloads/301-total-commander.html
registry will be in //
(last i recalled)
I use this one. Just unzip to PC desktop and run it form there (with device synced):
Thanks guys
I tried commander it did not work.Is this for PC or pocket pc. Could not find the registry editor in there lots of other crap but no registry editior. It also says I can have lan access I can not find anywhere where I can access file sittin on LAN.
Can you throw a few pointers.
Mobile registry, I have to use a pc to edit. Not very convenient as I dont have my pc with me all the time.
Is there anything else outthere.
Here ya go...
This is cooked into several of the ROMs out there but I find it very handy.
copy the TaskMgr.exe to your /Windows folder on the Tilt/Kaiser
Copy the shortcuts to /Windows/Start Menu/Programs/* (somewhere in here)
Hope this helps.
jamunaji said:
Thanks guys
I tried commander it did not work.
Click to expand...
Click to collapse
Hi, TotalCommander is PPC software. By using it you will find a folder \\ in root. There are 3 folders in \\: ftp, LAN and registry.
Hans Olo
sirsycho said:
Here ya go...
This is cooked into several of the ROMs out there but I find it very handy.
copy the TaskMgr.exe to your /Windows folder on the Tilt/Kaiser
Copy the shortcuts to /Windows/Start Menu/Programs/* (somewhere in here)
Hope this helps.
Click to expand...
Click to collapse
Thanks. Just what I was after.
Third said:
I use this one. Just unzip to PC desktop and run it form there (with device synced):
Click to expand...
Click to collapse
this is cool and very easy to use.
I have tried using several registry apps to successfully export [HKEY_LOCAL_MACHINE\Software\HTC\HTCHome\Launcher] belonging to a previous Hutch 3 ROM.
I now want to re import these keys into my newly installed Duttys 6.1.
How do I do this?
Scuse the newb question (duck for cover) but on a PC you tap the *.reg and it will import into the registry. On my Kaiser running Duttys 6.1 I have PHM_Regedit but Import option is greyed out.
A search did not resolve it so any help would be appreciated.
logger said:
I have tried using several registry apps to successfully export [HKEY_LOCAL_MACHINE\Software\HTC\HTCHome\Launcher] belonging to a previous Hutch 3 ROM.
I now want to re import these keys into my newly installed Duttys 6.1.
How do I do this?
Scuse the newb question (duck for cover) but on a PC you tap the *.reg and it will import into the registry. On my Kaiser running Duttys 6.1 I have PHM_Regedit but Import option is greyed out.
A search did not resolve it so any help would be appreciated.
Click to expand...
Click to collapse
Install FdcSoft's Taskmanager (it has a built in Regedit), by DotFred. In there you can associate .reg files with it. Then just run them to import.
Great I'll grab it. Thanks Dave I really appreciate the help. I know you all get sick to death of our newb questions.
logger said:
Great I'll grab it. Thanks Dave I really appreciate the help. I know you all get sick to death of our newb questions.
Click to expand...
Click to collapse
Dont worry. I spent 10 minutes trying to use PHM before I gave up.
Dot Fred's TaskManager is a kick ass task manager as well as a reg editor (amongst other stuff).
P.S. Easiest way to associate is: Open TaskMgr, tools, options, Create RegEit Shortcut. This will ask do you want to associate.
Cool I can see how to do all that now thanx.
Only hiccup is I can only run it from my Storage card. I cannot work out how to copy it to my \Windows folder. I cannot work out how to delete the existing basic taskmgr.exe that installed with Dutty's. I guess this is because it is a system file. If I try and copy and replace I get error message saying not possible. Whats the trick here?
logger said:
Cool I can see how to do all that now thanx.
Only hiccup is I can only run it from my Storage card. I cannot work out how to copy it to my \Windows folder. I cannot work out how to delete the existing basic taskmgr.exe that installed with Dutty's. I guess this is because it is a system file. If I try and copy and replace I get error message saying not possible. Whats the trick here?
Click to expand...
Click to collapse
Don't know. I just leave the exe in My Docs, and run it from the shortcuts.
Okay. Will do same. thanks..
Resco Explorer will also do it.
To dotfred from your SD Card, do this:
Place the .exe in you \Storage Card\Programs folder. With your desktop PC, navigate to \Windows Mobile Device\My Device\Storage Card\Programs & right click on the exe file. Select create shortcut. Move the shortcut to \Windows\Start Menu\Programs using desktop pc.
Voilla! you are done, go check Programs & it's there.
this is the steps i usually take when entering in a reg file. I use resco explorer for all this. I double click. Then I make sure I close resco through the menu exit and not the X button. Then I continue to play around with my phone for a while opening up menus and stuff. Then I soft reset. Doing these steps, I for sure get my stuff to work. There might be some unnecessary steps I take, but I end up with what I want. Many people have trouble keeping their registry stuff to stick. The steps I take, I never worry about that.
GSLEON3 said:
Resco Explorer will also do it.
To dotfred from your SD Card, do this:
Place the .exe in you \Storage Card\Programs folder. With your desktop PC, navigate to \Windows Mobile Device\My Device\Storage Card\Programs & right click on the exe file. Select create shortcut. Move the shortcut to \Windows\Start Menu\Programs using desktop pc.
Voilla! you are done, go check Programs & it's there.
Click to expand...
Click to collapse
Thanks for the tip. Was not aware you could make shortcuts this way. Running from the card appeals because the .exe will still be there after reflashing a new ROM and I will only need to move/copy the shortcut. Being a newb I have been somewhat reluctant to run apps from the card but I am gathering that is is a quite an acceptable thing to do.
Is there a way to place registry keys inside a CAB so that they will get imported when the CAB is launched? Whilst the above DotFred association method works a treat for me with ".reg" files I would like to find a standalone method to import registry info. So that I can pass a single file to someone else and without any extra config they can import the contents into their registy.
definitely. There are a lot of cab creators where you can just enter in your reg key and will create your cab. Someone recommended me this program. I really like it.
http://www.aperitto.com/content/view/14/159/
thomassster said:
definitely. There are a lot of cab creators where you can just enter in your reg key and will create your cab. Someone recommended me this program. I really like it.
http://www.aperitto.com/content/view/14/159/
Click to expand...
Click to collapse
Thanks for the link thomasster. Does the job well. Probaly an overkill (and therefore overpriced for what I need), but I got it to work OK. Also from using it, I learnt that the process simply converts the registry keys to provxml. So now I am looking to manaully create the "_setup.xml" and then use iexpress.exe in Vista to create the CABs.
Is there a way to undo changes made by import .reg file?
I imported a reg file using DotFredd's Taskmanager. Now I want to undo it? Is it possible? How?
Thanks
Do any of you know how to overwrite the gif image myinfo.192.gif it is saved in local\windows dir.. i get an error message when trying to delete or replace.
I wish to customise this startup page with my own image. Or, has anyone ever thought of customising this page with any add-on's?
What i would like is to use the S2U2 slider on this page as opposed to tapping the screen. But i imagine this would be a difficult task... or maybe not???
Please what are your thoughts?
When and where do you see this image?
Try to copy your edited file to a folder somewhere on the phone ... then use Total Commander (on the phone) to copy it to the windows folder...
It’s a hidden file and the attribute also shows it's in ROM. I have already tried to copy to the windows folder with GSFinder but to no avail.
I will give total commander a try, thank you.
EDIT!!!
WoW great stuff Total Commander Worked! I would still like to edit this My Info Page with add-on's, so if any thoughts on this they will be greatly appreciated. There must be some way to add some controls of some type slide to unlock etc?
Thanks
olstar said:
It’s a hidden file and the attribute also shows it's in ROM. I have already tried to copy to the windows folder with GSFinder but to no avail.
I will give total commander a try, thank you.
Click to expand...
Click to collapse
Yeah, I know 'where' to see the file..
but I mean when you are using the phone does it show..??
how do i make .EXE files appear on the PROGRAMS folder on my diamond - do i always have to go to file explorer to open .exe file
help please
bump
anybody please
Creating a shortcut to the exe in the start menu might be enough, but I haven't tried it. Doing that will definitely work to show it in Start/Programs, but I don't know if it will show up in TF3D programs unless it's actually installed with a cab.
hawwy said:
how do i make .EXE files appear on the PROGRAMS folder on my diamond - do i always have to go to file explorer to open .exe file
help please
Click to expand...
Click to collapse
Use a file manager such as Total Comander and place the .exe you want in:
\Windows\Start Menu\Programs.
Greets.
hey is it possible to create folder on the menu in a win 6.5???? i havea lot of programs and i want to put them in one folder...so can i do this???
astrit_arsllani said:
hey is it possible to create folder on the menu in a win 6.5???? i havea lot of programs and i want to put them in one folder...so can i do this???
Click to expand...
Click to collapse
create it/them
e.g. in tc go to \Windows\Start Menu\ and create the new folder/folders/sub-folders as you need them, then create *.lnk files of your progs in it/them
ok...thnx...it works.....thnx....
how can i create a .lnk file?
JoLLAJoLLA said:
how can i create a .lnk file?
Click to expand...
Click to collapse
use tc
highlight the e.g. *.exe (don't open it!)
navigate File (menu) - >>>>> Create Shortcut, with Tree navigate to target folder, confirm with OK, done
cheers
JoLLAJoLLA said:
how can i create a .lnk file?
Click to expand...
Click to collapse
What he means by that is that you need to create a shortcut. As simple as that.
is there any way i can do this on the computer? i did active sync but it doesn't show the windows folder.
wildseal2003 said:
is there any way i can do this on the computer? i did active sync but it doesn't show the windows folder.
Click to expand...
Click to collapse
it absolutely does
I have to translate to English, but in your Explorer it should be like:
Mobile Device - My windows mobile-based device - Windows ...
that doesnt show all the files though
wildseal2003 said:
that doesnt show all the files though
Click to expand...
Click to collapse
sure?
can you pls add an example? after a very quick see-through I'm inclined to disagree
maybe you should check the following setting in your windows explorer:
Tools - Folder Options... - View (tab) - Files and Folders - Display xxx... option settings, maybe something required is unchecked there
total commander the pc version
got a free plugin called [WinCE device]
it let you browse the pda enter all dirs
and see all files
im using total commander now like you said and it works fine i can see all the files. the only problem is i cant move any of them. it just gives me download error
Rudegar said:
total commander the pc version
got a free plugin called [WinCE device]
it let you browse the pda enter all dirs
and see all files
Click to expand...
Click to collapse
great hint, thx for that, working, though I couldn't create a new shortcut with it, added cmd to Button Bar but all it does is move the file