Kaiser problem/glitch - Tilt, TyTN II, MDA Vario III General

Hello, sometimes after i finish a call, or when i use audio manager when i finish and hit the x close button, i go back to the today screen, but nothing recognizes my touch after that...but i noticed that instead of it saying 'start' at the top of the list, it would say call or audio manager or whatever program i was using before it 'froze'.
The only way to stop that and bring it back to normal was to press the power button and then press it again (not turn off the phone, but put it in the 'standy' ish state)
Anyone know why this is happening and if there is a patch/fix for this?
Thank you!

I have a customer with 12 x V1615 (Vodafones Branded Kaiser) all experiencing the same problem.
I should be getting my hands on a device on monday to test some stuff out on.

Mine did it a few times (Orange Tytn 2) but seems to have fixed itself now...

Related

noisy flics and phone bugs on 2020i...

Hi everybody, my first message here
few days ago i got my new Qtek 2020i... but i have some problems with it..
1) sometimes (expecially when activly using) I hear single flicks(sounding very likly elecric discharges) from device...(even when sound is off)... last time i noticed that it sounded at the moment I quit program and memory it used was released... but sometimes it flics just when standing in cradle.... does anyone have same noisy sounds? or it's damaged device, and I should replace it?
2) I can't close dialing screen... I installed spb plus plugin which makes programs really close when you press X button.. it works, but it refuses to close dialing screen - when i press top rignt corner shortly - it blinks with phone screens I just used(exacly them - if I pressed on "quick call" button, then returned and clicked on history of calls and returned again - it will fastly show that 4 screens in that order) and returns to dialing screen again.... I can exit it only by holding top right corner button for 3 sec's or start button... but it still holds "phone" task in memory(spb plus shows it.... but there is now such task until I use phone for the first time after soft reset) - and if I use phone again - the number of screens I'll see on exit will increase and increase untill I make soft reset.... Of course I can always exit by long pressing the button... but it's annoying, and maybe there is another solution?... is that my software problem? or it's windows bug?
ps thanks for nice forum, I already found a lot of usefull info here =)

Problem with Phone App

Well I've had my Tilt for a week now and I have been frustrated completely with the Phone App.
First of all, when I am calling a tone prompted location where you have to press the keys to get somewhere (611, corporate voicemail, etc), some of the time the phone will go into "hold" when i press the keys.
Secondly, after a call that i have pressed the keys for tone operation, the phone app will not completely close. the screen will stay half dim and the start bar and task panes are locked out. i can't access any of the icons at the top of the screen. the only button available is the task manager which shows no programs running.
i can pretty much replicate the 2nd problem consistently. does anyone else have this problem? Please try to call into a company say even 611, go through all the tone prompts and see if the phone app closes appropriately afterwards. make sure you are on the phone long enough for the screen to automatically dim.
the only way for me to get past this is to softboot so i can get access to the start menu again. but i'd rather not have to softboot after every phone call =T
Thanks!
Same problem here, any help would be great.
Massiv
disable the lock thing where you have to enter a pin - i think its a bug in the rom
Same problem - but if press the on/off button for the screen twice I do have again access to all icons. Not nice but ....
yeah i was messing around with the phone last night and realized that it has to do with phone lock and figured out if you press the power button to put it to sleep and press it again to wake it up, everything is normal again. it was just a fluke how i found out but i'm glad to know that this isn't only my problem. i was about to do another hard reset on the phone.
i called ATT techsupport and they told me it might be the simcard. can other Tilt owners chime in here. is this a ROM problem or could it be related to a faulty sim?
http://forum.xda-developers.com/showpost.php?p=1566518&postcount=2

Vario III locks when using phone

I've been having problems with my new MDA Vario III.
Whilst using the phone, I cannot use any other applications or even get the start menu to appear. Is this normal?
Also after hanging up (when either receiving or initiating a call), I need to press the power button twice to get the today screen back. Until I do that, the entire device just seems to freeze.
Are these known problems?
Many Thanks
threezor said:
I've been having problems with my new MDA Vario III.
Whilst using the phone, I cannot use any other applications or even get the start menu to appear. Is this normal?
Also after hanging up (when either receiving or initiating a call), I need to press the power button twice to get the today screen back. Until I do that, the entire device just seems to freeze.
Are these known problems?
Many Thanks
Click to expand...
Click to collapse
No this is not normal.. Think you need a hardreset.
threezor said:
I've been having problems with my new MDA Vario III.
Whilst using the phone, I cannot use any other applications or even get the start menu to appear. Is this normal?
Also after hanging up (when either receiving or initiating a call), I need to press the power button twice to get the today screen back. Until I do that, the entire device just seems to freeze.
Are these known problems?
Many Thanks
Click to expand...
Click to collapse
I woldn't call it "normal ", but the symptoms you described are pretty typical. My Tilt does the same. There are three known issues here, at least one of them is assotiated with using password/pin.
Issue 1. The screen goes black during the call. The workaround I use is to rotate the Jog Wheel. That wakes up the screen.
Issue 2. The Windows Start button doesn't work during the call. Don't remember the workaround for this, but I believe you can close the dialer screen and scroll up and down through you Today list.
Issue 3. When you terminate the call the screen becomes deem and some buttons may not work. The solution is to press the power button twice after each call (or disable the pin).
Sorry can't give you links (hard to do that on the phone ), but these issues have been discussed on this and other forums. Hope they will be solved in future updates! Really annoying issues, IMHO!

Do I have a Dead HTC Diamond?

Hey,
I had gotten to sample the HTC Touch Diamond...and thats all. I got it as a gift from overseas (so its a GSM -simcard- phone). Long story short, I didn't want to buy the phone from the local wireless provider because I'd be stuck with them. I open up the HTC box, turn on the phone, calibrate, take a few pics, and then I decided to put in a simcard. The phone was on at the time and I wanted to make a few phone calls to test out the new phone. I have no idea what happend, but the phone just turned off. I turn it on, and there is no lights, no screen, however the phone did turn on (i felt the vibration, and heard the startup sound). I took out the battery, and put it back in a couple of times and I finally got to turn on the screen and lights, however i recieved a werid message, and it didnt seem that my buttons at the front were working right (they worked fine before when i took pics and listend to the demo music), so I unplugged the battery and put it back in..Since then I have not been able to turn on my screen.
Here is how I know the phone is on, but there are no lights and no screen:
1. the boot up vibration
2. the bootup music
3. the volume up and down
4. I am able to touch the screen to turn up and down the volume.
5. When I put in a simcard, the phone does a ring every min or so (I have no idea as to the cause as i cant see error messages)
Now this is what I did to try to fix it:
1. I tried soft reset , however pressing the reset button does not seem to make the phone restart as i can turn up and turn down the volume no matter how long i press the reset button
2. I tried a hard reset, that doesnt seem to work either. (btw im guessing the confirmation message screen and pressing the volume up key) I think that the reason why steps 1 and 2 are not working, is because the phone does not seem to want to restart!
3. I tried taking out the battery and putting it back in..but i never did it for longer than a minute
4. I tried to update the rom, however the rom update application gives me a "Connection error" even though i have my phone plugged in. If i am supposed to set the connnection up from the inside then nm i cant do it cuz i cant see a thing.
5. I tried charging the phone (through USB and the power outlet)
Does anyone have any idea what happend? how can HTC Touch Diamond go from new to blank screen in about 5 minutes of usage?
plz give me all suggestions u can come up with...plz try to help me. Ive been waitign 2 years for a good phone, and now that I have one, I cant use it. Help me!
remove the sim card and see if it acts normal.
is it already unlocked?
the sim card has been removed, reinserted , and removed again.. yes the phone is already unlocked as the simcard apparently worked ( i made a phone call and the phone rang)
has no one ever come across my problem?
bumping...

Diamond does not Power On

Hi i have a few issues on my diamond. I hope you guys could help..
1st issue: lately my diamond keeps on resetting by itself.
2nd issue: later I've learned that when I record my voice using the software within the ROM, I don't hear anything but when I record my voice using my htc headset/earphones there is a sound.
What I did was:
This day I've flashed a new rom (Energy Rom) into my Diamond. It works ok then I flashed the Radio (Radio_1.13.25.24). I was able to use my diamond for a few hours.
Now..
3rd issue: My diamond is not powering on..
What i did before this happened was...
I pressed and hold the power button for about a few seconds so the ShutXP would pop up and I could soft reset my diamond.Before I clicked the soft reset button, I was checking out all the functions of it. then i clicked, a little icon,which is the Setup Timer Action. Here's the setup:
Action: Turn Off Pocket PC
In: (i don't exactly have seen the time indicated)
As curious as i am, I Clicked the Set Action button. It did shut my diamond off. Then I tried turning it on, but all it was doing was vibrate and the screen was black. At first I was hearing the start up sound a few times but later it didn't hear it anymore. I plugged in the charger but there's no white light on the circle button which used to have a light on the borders of the circle button when plugged in the usb cable. I tried pressing the power button plus the Volume down so the bootloader would appear but it did not. What shall I do?
Are you sure that the screen working because the phone vibrate and play the startup sound so if think its the screen that have som serious problem !!
HELP
I also flashed a new rom (Energy Rom) into my Diamond before.
It cannot run window mobile6.5.........how can I do???
I cannot connect to PC .......
I recently also had a similiar problem, after attempting a flash of the Rom, the ROM update stopped halfway through and reported that it had lost connection to the device....
The whole phone would not vibrate/power on, nothing - no glowing ring around the middle button to indicate it charging at all.
I had to return to the repair centre and somehow they didn't notice that I had modified the firmware and replaced the whole phone for free citing a hardware issue ...
Doesnt sound good if you cannot hard reset the device

Categories

Resources