Vario III locks when using phone - Tilt, TyTN II, MDA Vario III General

I've been having problems with my new MDA Vario III.
Whilst using the phone, I cannot use any other applications or even get the start menu to appear. Is this normal?
Also after hanging up (when either receiving or initiating a call), I need to press the power button twice to get the today screen back. Until I do that, the entire device just seems to freeze.
Are these known problems?
Many Thanks

threezor said:
I've been having problems with my new MDA Vario III.
Whilst using the phone, I cannot use any other applications or even get the start menu to appear. Is this normal?
Also after hanging up (when either receiving or initiating a call), I need to press the power button twice to get the today screen back. Until I do that, the entire device just seems to freeze.
Are these known problems?
Many Thanks
Click to expand...
Click to collapse
No this is not normal.. Think you need a hardreset.

threezor said:
I've been having problems with my new MDA Vario III.
Whilst using the phone, I cannot use any other applications or even get the start menu to appear. Is this normal?
Also after hanging up (when either receiving or initiating a call), I need to press the power button twice to get the today screen back. Until I do that, the entire device just seems to freeze.
Are these known problems?
Many Thanks
Click to expand...
Click to collapse
I woldn't call it "normal ", but the symptoms you described are pretty typical. My Tilt does the same. There are three known issues here, at least one of them is assotiated with using password/pin.
Issue 1. The screen goes black during the call. The workaround I use is to rotate the Jog Wheel. That wakes up the screen.
Issue 2. The Windows Start button doesn't work during the call. Don't remember the workaround for this, but I believe you can close the dialer screen and scroll up and down through you Today list.
Issue 3. When you terminate the call the screen becomes deem and some buttons may not work. The solution is to press the power button twice after each call (or disable the pin).
Sorry can't give you links (hard to do that on the phone ), but these issues have been discussed on this and other forums. Hope they will be solved in future updates! Really annoying issues, IMHO!

Related

TyTN II Problems

There seems to be a problem with the Kaiser. After finishing a phone call on the Kaiser the backlight goes off and stays off and I cannot access the Start menu. I can access all other functions but backlight stays off and one still cant get into the Start menu from anywhere on the screen. I have to press the power off button quickly once and then wait a second, press it again to be able to access the start button or the light to come on. This is definitely a bug in the tytn II and I hope HTC is doing something about this.
I have experienced the same thing.
After the phone call. I did not hang up.
Instead the person at the other end hangs up and I tries to navigate away then the phone appears to lock up.
Could not turn the phone off either. Had to wait until the phone turned itself off. Once restarted everything ok...
sudo009 said:
I have experienced the same thing.
After the phone call. I did not hang up.
Instead the person at the other end hangs up and I tries to navigate away then the phone appears to lock up.
Could not turn the phone off either. Had to wait until the phone turned itself off. Once restarted everything ok...
Click to expand...
Click to collapse
I noticed this as well...
pretty crazy.
Hmm I haven't that problem. Danish HTC TyTN II
Do you folks have the password set? I have heard that that can cause this problem. Try to turn off password checking.
Hi @ All, any news about that problem?
I have a solution
I had the same problems and after installing all the ROM's and still have the same problems, I found out that the problem is not in the ROM it is in the 3G network, disable the 3G network and set it to GSM and all the problems will disappear.
This was nothing to do with 3g.
It was a pre-programmed fast sleep setting that was flawed. Download Kaiser Tweak and turn off all the sleep during call options.
Difference in memory in use
I have problem with my TyTN II, I don´t know why, but when I control the state of the memory in use, it seems to be 112 MB in use and 19,4 MB free. But when I control every item (Applicationdata, Confimgr, ProgramFiles etc., even including hidden files) and calculate total then it seems to be only 45 MB in use. Can anyone explain this
thanks

Problem with Phone App

Well I've had my Tilt for a week now and I have been frustrated completely with the Phone App.
First of all, when I am calling a tone prompted location where you have to press the keys to get somewhere (611, corporate voicemail, etc), some of the time the phone will go into "hold" when i press the keys.
Secondly, after a call that i have pressed the keys for tone operation, the phone app will not completely close. the screen will stay half dim and the start bar and task panes are locked out. i can't access any of the icons at the top of the screen. the only button available is the task manager which shows no programs running.
i can pretty much replicate the 2nd problem consistently. does anyone else have this problem? Please try to call into a company say even 611, go through all the tone prompts and see if the phone app closes appropriately afterwards. make sure you are on the phone long enough for the screen to automatically dim.
the only way for me to get past this is to softboot so i can get access to the start menu again. but i'd rather not have to softboot after every phone call =T
Thanks!
Same problem here, any help would be great.
Massiv
disable the lock thing where you have to enter a pin - i think its a bug in the rom
Same problem - but if press the on/off button for the screen twice I do have again access to all icons. Not nice but ....
yeah i was messing around with the phone last night and realized that it has to do with phone lock and figured out if you press the power button to put it to sleep and press it again to wake it up, everything is normal again. it was just a fluke how i found out but i'm glad to know that this isn't only my problem. i was about to do another hard reset on the phone.
i called ATT techsupport and they told me it might be the simcard. can other Tilt owners chime in here. is this a ROM problem or could it be related to a faulty sim?
http://forum.xda-developers.com/showpost.php?p=1566518&postcount=2

Start icon not functional

Has anyone come across the problem of a TILT hanging up (could not find common denominator when does this occur) and ONLY the "Start" icon (and the "start" button)is inoperable. i.e. all functions work perfectly, however I have no way of getting to the Start screen - only soft reset. Help anyone
Do you have a password set? Does this only happen after a call? If so, this has been discussed many times - just do a quick search.
If not, I´m afraid I can´t help you with your issue.
Good luck!
djmaven said:
Has anyone come across the problem of a TILT hanging up (could not find common denominator when does this occur) and ONLY the "Start" icon (and the "start" button)is inoperable. i.e. all functions work perfectly, however I have no way of getting to the Start screen - only soft reset. Help anyone
Click to expand...
Click to collapse
I think I had this problem also. I'm not sure what causes it, but it looks like ti appears after I try to use MS Voice Command.
I had this problem. I found it doesn't need a soft reset, just switch it off (hit the power button briefly) and back on again. Fixed it every time. Annoying but not fatal...
I am having a similar problem. I recieved an 8925 with a touch screen that doesn't work. No physical damage, but I noticed there is no start screen. I got it to upgrade to WM 6.1but still no start menu or system settings. It boots to the align screen but of course the touch screen doesn't work so that's all I get. Sometimes I get past that and the rest of the PDA seems to work with the keypad. I have reset it several times and still nothing. I removed the touchscreen and ordered a new one. Hope I haven't spent folishly. If someone has a clue to what the problem is I would be very grateful.

Htc Tytn 2 Screen problem

Hi everyone,
I got a HTC Tytn 2 and i have a problem with it.
When i boot the phone it starts up and goes into windows like every windows mobile phone.
But when i press the standby button my screen wont go out of standby.
Only when i reset the phone it will work again.
Anyone got idea's ?
Oke, since no one responded.
Is there any way how i can make the Power Button replaced with the Speed Dial Button.
Because i think my power button is broke.
WGN88 said:
Oke, since no one responded.
Is there any way how i can make the Power Button replaced with the Speed Dial Button.
Because i think my power button is broke.
Click to expand...
Click to collapse
Have you at least tried backing up your data and doing a hard reset first ?
Yes, and i have also tried to put on a new rom and even updated the radio.
Iam a little bit out of idea's...
here are some more ideas:
1. how to test the power button: you say pressing the power button does not wake up the device once it goes to sleep. conversely, does pressing the power button put the device to sleep while the screen is on? if the power button is unable to make the device go off->on as well as on->off, then the power button is likely broken. if pressing the button achieves on->off, then the power button is probably ok and some software issue becomes more likely.
2. how to enable wake on pressing ANY hardware button: look for an option in Settings. i can't tell you the exact option because the ROM i am using does not have a link for this option, but this option does exist 100% in stock ROM and in lots of other ROMs. it contains settings like "Lock all buttons except power button" and "Keep all buttons unlocked" or something similar. by using the second option, pressing ANY hardware button while the screen is off will wake up the device.
3. you can use AE button plus to perform even more advanced button (re)mappings.
4. just to be sure that your device is really working correct, does the screen wake up when you call the phone or when you receive a text message? if it does not wake up even then, then search for "sleep of death".
Thanks for the response.
I think its a Service of Death problem.
Because when i try calling/smsing it, it wont go on
The buttons do work then...hopefully there's a fix for this problem...
Oke, i tried switching to 2G or 3G only but that didn't fix my Standby of Death.
I also bought a new sim card of vodafone so i wont get a No Sim error.
But what can i do now about it...it hangs like every 5 min...
Okay, after a will testing, the phone hangs every time its almost like when iam on the road with my tytn 2 and placing it upside down, it hangs.
But when iam putting it in the leather holder it doesn't hang.
Any had the same problems ?
WGN88 said:
Okay, after a will testing, the phone hangs every time its almost like when iam on the road with my tytn 2 and placing it upside down, it hangs.
But when iam putting it in the leather holder it doesn't hang.
Any had the same problems ?
Click to expand...
Click to collapse
Maybe it's hardware and something is coming loose

N1: Screen issues (Stops working)

Hello,
I was wondering if there is some way to track what is happening on my phone? Since my screen stops working when waked up from standby. i.e. if i press the button at the top to standby and then when i press it again and reach the lock screen the touchscreen is not working, it is simply not registering touch and neither are the 4 small buttons on the bottom (back, settings, home, search). However, the OS in itself is still running as I think since I can still see the time move and if I hold the off button the menu comes up for reboot etc.
Anyone heard of anything like this or any tips how to solve this? I am rooted and running CM6 I think at the moment.
Thank you,
Svarto
Svarto said:
Hello,
I was wondering if there is some way to track what is happening on my phone? Since my screen stops working when waked up from standby. i.e. if i press the button at the top to standby and then when i press it again and reach the lock screen the touchscreen is not working, it is simply not registering touch and neither are the 4 small buttons on the bottom (back, settings, home, search). However, the OS in itself is still running as I think since I can still see the time move and if I hold the off button the menu comes up for reboot etc.
Anyone heard of anything like this or any tips how to solve this? I am rooted and running CM6 I think at the moment.
Thank you,
Svarto
Click to expand...
Click to collapse
so the only way to escape this is by pulling the battery and rebooting? when you do reboot and dont go in standby, the touchscreen works fine?
You can check the issue using logcat and /proc/kmsg.
Also, you can read my threads on the subject, describing the same error with logs, and see if your logs are the same.
I'm currently trying to check if the error repeats itself after full wipe and starting from scratch. In the meantime it didn't show up until I applied a theme, and then after reflashing the ROM it's gone again - I'm still checking, only a day has passed.
Yes, the only solution is to pull out the battery and reboot. Then it works fine and I can go in and out of standby. I havent found a particular pattern to it happening so it is hard to reproduce.
I will have a look at that logcat and your other thread!
Just to guide you - when it happens to me, the phone gets stuck with mmc0 access that receives "CRC error" reply and doesn't go through. Pressing power button for a long time several times and playing with trackball / touching the screen between presses "releases" the "lock", and you'll be able to work with the phone again until you put it to sleep again. If you turn WiFi and BT off and then back on - the problem seems to disappear.

Categories

Resources