Unable to access windows shares over WiFi - Tilt, TyTN II, MDA Vario III General

Hi,
Im trying to access windows shares on my windows 2003 server, but no matter what I do Im unable to get through.
Im using Resco File Explorer, and I can see the server and even access the FTP server on it, but for some reason the windows shares dont work. I get different error messages, but basically they say "Cannot connect shared path : Unknown error.".
Im able to connect to the shares from PCs across the network, so the server config should be ok.
Please advise.

Your Win2k3 Server is certainly a domain controler. Domain controler require SMB Signing to get someon authentificated. As Windows mobile doesn't support SMB signing, the only way is to have it disabled on the server through GPO

Thanks m8.. With your hint and google I was able to find the following, which did the trick:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanManServer\Parameters
Value Name: EnableSecuritySignature
Data Type: REG_DWORD
Data: 0 (disable), 1 (enable)

Related

How can i connect Windows Live for Windows Mobile throug a proxy server?

Hi all,
The proxy server is used in wireless system at my work. I enabled proxy server configuration in communication manager and i can connect web sites with internet explorer.
My question is, while i am unable to connect windows live messenger, there're also no proxy configuration on it. Are tehere any way to use messenger through proxy server ?
Or, i guess Windows Live for Windows Mobile is brand application came with WM6.0. Do you know may i use old messenger versions via proxy? Or do you know any other msn client with proxy support ?
Thanks in advance for your help.
you can setup the proxy in live messenger
I couldnt find any place to enter a proxy address in messenger. Could you please tell me where can i enter the proxy?
hey, I connect through a proxy for all my internet (using tmobile usa), and I was never able to figure out how to use windows live via proxy. however to download my hotmail emails I finally found a work around. you have to upgrade ur hotmail account to hotmail plus (20 dollars/year). now u have access to pop settings and set up a new email account using those settings (not through windows live) good luck
omar
I do not care mails, i even dont use hotmail for mailing.
i need to instant messaging to keep talking with my girlfriend.
You can't use a proxy server to access WLM Service from your Pocket PC. It simply doesn't support this.
The way that the client communicates with the Messenger service greatly differs when using a proxy, and support for this is not available in the mobile client. You NEED to create a direct connection, which thus prevents you from connecting in networks where using a proxy server (HTTP or SOCKS) is mandatory.
My mobile connected to Wifi but I couldnot surf WEB cause I didn't know how to setting up
my working Proxy via port 8080.
Help me!
Same problem here, but a little diferent.
I connect to the proxy server in my office network trough wireless access point, and then it asks me for the user credentials. I put in the credentials (i have an unrestricted account, i'm one of the administrators) but then it keeps asking me for them as if i had used wrong credentials! Are there any configuration on the proxy server to accept WM6.1 connections?
Thank's!

Public IP Address??

I am trying to run one of the many FTP servers available for Windows Mobile (vxFTPSrv or ShareIT FTP) to keep some files in sync but I can't seem to figure out what public IP address my phone has. vxFTPSrv says it is listening to a non-routable 10.**** while whatismy ip says it starts with a 200.**** while DynDNS for Windows Mobile says it is 32.****. Nevertheless, none of these work nor can I get these programs to listen to the ports. Any ideas? Does the Tilt even get a public IP address from AT&T? Thanks.
Try this
I'm no pro, but had to tell the Physical address to the the tech guy at my university so he could enable my phone o use the wireless network...
... anyways, download and install a Registry Editor (I use Task Manager v2.8) you should be able to access an Ipconfig tab, where all the information is available.
I don't know if I'm in the right track.... Hope this helps? =)
jim
your pda have an ip address
using wifi router the uplink sees the routers ip
using an isp the internet sees the isp's assigned ip
http://www.ip-adress.com/
http://en.wikipedia.org/wiki/IP_address
Here is a kewl utility that is FREE.
http://www.cam.com/vxutil_pers.html
Here is the stuff it does.
DNS Audit
DNS Lookup
Finger
Get HTML
Info
IP Subnet Calculator
Password Generator
Ping
Ping Sweep
Port Scanner
Quote
Time Service
Trace Route
Wake On LAN
Whois
Another good one I use is Iper Suite.
http://tonaya.com/products/iper/index.php
For casual use the first one is probably satisfactory.
IPer is worth buying for the increased functionality and has a TFTP client.
HTH
TSoma said:
I am trying to run one of the many FTP servers available for Windows Mobile (vxFTPSrv or ShareIT FTP) to keep some files in sync but I can't seem to figure out what public IP address my phone has. vxFTPSrv says it is listening to a non-routable 10.**** while whatismy ip says it starts with a 200.**** while DynDNS for Windows Mobile says it is 32.****. Nevertheless, none of these work nor can I get these programs to listen to the ports. Any ideas? Does the Tilt even get a public IP address from AT&T? Thanks.
Click to expand...
Click to collapse
200.* would be a public IP. As would 32.*
Turn off your proxy setting in the phone and do the www.whatismyip.com thing. That will get you a more meaningfull result than anything else.
When I'm on GPRS/Edge (AT&T proxy settings in force) network I get a 66.102.186.15 IP address as reported by whatismyip.com. That resolves to alpmagr1fe06-dmz.mycingular.net. Which should be a att proxy server even tho it implies by its name its on a DMZ.
When I turn off the proxy for GPRS/Edge I get 166.195.188.15 according to whatismyip.com. That IP address will not respond to ICMP commands. So I assume it is firewalled. So it seems to me that yes you CAN and DO get a public IP address, its just that address is heavily firewalled.
You've piqued my interest, tho I cannot do anymore testing at this moment.

Connecting to Active Directory from Kaiser

I am having problems connecting my Kaiser using resco explorer to AD 2003. I browse for a share on the device and it prompts me for user/pass/domain which i duly enter. It just won't connect. I can see a share on my PC no problems, as it doesn;t need a user/password.
Does anyone have an idea as to why it fails..? I can connect to the domain from any other pc..so i know the user/pass are correct..?? Struggling..
Cheers. Karl
Try to use as user name:
[email protected]
or
domainname/username
just a note if you using [email protected] it needs to be the full domain name bot just the netbios type domain name
i.e. [email protected]l rather than [email protected]
Thanks guys. I have already tried both suggested methods. The logon box just keeps popping back up. I am using a wifi connection and i know this is working ok.
Any more ideas?

Diamond 3G Sync error

Hi all,
I'm having an issue when trying to synchronize two diamonds and a cruise (all of them running wm6.1 FRE) with an Exchange Server 2003 SP2. Each time I try to synchronise through GPRS/3G , i'm getting an error (n° 0x80072EE2, wich means server not available).
Below is my initial situation :
Synchronization is ok using USB on all device. ActiveSync 4.5 is configured to use server "mail.mydomain.com", refering to a different IP address depending on whether synchronization is initiated from outside or inside local network. From outside, a redirection from gandi.net transfers mail.mydomain.com to https://xxx.xxx.xxx.xxx/exchange, "xxx.xxx..." being my exchange server's public IP.
After spending days looking for a workaround, here's what I've tried :
- Disabling WM DNS cache (tried with both DnsCacheEnable and DnsCacheEnabled registry entries) and soft reseting the device, as suggested here : http://forum.soft32.com/pda/Wireless-Attempt-results-Error-0x80072EE2-ftopict76576.html ;
- Unchecking the "use proxy" box in my connection's advanced properties ;
- Placing the OWA redirection (https://xxx.xxx.xxx.xxx/exchange) on a new subdomain : webmail.mydomain.com, in order to have mail.mydomain.com pointing the same public IP address inside and outside the network.
Now I have :
mail.mydomain.com --> public_ip
webmail.mydomain.com --> https://public_ip/exchange
So, theorically, putting my public IP address or mail.mydomain.com inside ActiveSync server's configuration should be exactly the same (except for certificates). Here is my problem : When using directly my IP address, I can see the request going through the firewall, to port 443 of my exchange server (but getting a certificate error, since i'm supposed to be connecting using mail.mydomain.com). When using mail.mydomain.com, I still get the 0x80072EE2 error, and nothing goes through my firewall..........
Looks like there is no DNS lookup during wireless synchronization when using a domain name in activesync configuration...
Thanks for reading, any help would be great.

any way to view saved cookies/passwords Nokia 930?

hi first of all i am new here and very green
i had a major meltdown of my laptop which i usually keep all the passwords for IE.
long story short i lost all my passwords but had some stored (on IE) on my nokia 930. i have no way of getting the password reset as i do not have the email address anymore (disposable one doh), but have the info stored on my Lumia. is there any way i can get the info off the phone so i can get my old account back?
tbh i am not sure where to look and have tried google (ing) it but can't find an answer.
thanks in advance
There's no easy way to get at the cookies on a Lumia, but there are a few tricky ways. One of the least bad, if you run Windows 8.1, is just to turn on synching between the phone and the PC. On the phone, go to Settings -> Sync my settings, and turn on the Internet Explorer and Passwords options. This does send your passwords through Microsoft, but it should work. On the (new) PC, use Windows 8.1 and sign in with the same Microsoft account you used to sign into the phone. Make sure the PC is also set to sync settings, run IE on the PC, and hopefully it'll have your credentials!
The next best option / best option that doesn't send your credentials through a third party is probably to use a proxy. Fiddler is free and fairly easy to use. Install it on a PC, connect the phone to the same network as the PC, run Fiddler and tell it to allow external connections (the setting for this is under Fiddler Options), and then go to the WiFi settings on the phone and tell it to use the PC's IP address (and the port Fiddler is listening on) as a proxy server. To set a proxy, press and hold on the WiFi network that you're using (on the phone) and select Edit. Once the proxy is set, use IE on the phone to browse to the relevant sites, and you'll be able to see the cookie values (which are not passwords, but are authentication tokens that are usable at least in the short term). If you need the secure (HTTPS) cookies, you can tell Fiddler to decrypt HTTPS traffic and then export the certificate it uses to create fake site certs. Install Fiddler's root CA cert on the phone and you'll then be able to see HTTPS traffic too.
thanks @GoodDayToDie.
I will give it a go, although I don't run 8.1 on the laptop I will go borrow someone else's

Categories

Resources