Connecting to Active Directory from Kaiser - Tilt, TyTN II, MDA Vario III General

I am having problems connecting my Kaiser using resco explorer to AD 2003. I browse for a share on the device and it prompts me for user/pass/domain which i duly enter. It just won't connect. I can see a share on my PC no problems, as it doesn;t need a user/password.
Does anyone have an idea as to why it fails..? I can connect to the domain from any other pc..so i know the user/pass are correct..?? Struggling..
Cheers. Karl

Try to use as user name:
[email protected]
or
domainname/username

just a note if you using [email protected] it needs to be the full domain name bot just the netbios type domain name
i.e. [email protected]l rather than [email protected]

Thanks guys. I have already tried both suggested methods. The logon box just keeps popping back up. I am using a wifi connection and i know this is working ok.
Any more ideas?

Related

Synchronising with Microsoft Exchange - Support Code 80072ee2

Hi !
I am trying to find different ways to synchronise with the Exchange Server that I use.
I have Outlook2007 on my home PC and synchronise my Kaiser with the PC's Outlook 2007.
I can see that I can change the location to the actual server in Microsoft ActiveSynch -> Tools -> Options
But when I try this, after a long wait it fails and gives the error message -
80072EE2
I find on a search that this means " The request has timed out. It is generally a temporary or recoverable situation. Try again later "
But it never seems to connect.
I do know that the exchange server and the home PC holds much the same info, for me, so, in reality, I do not need to synch to the exchange server at home.
But I am interested to know if I can synch, when out and about, using
a) a gprs connection,
b) the Kaisers WiFi
I am reading and searching but if anyone has any useful pointers, it would be much appreciated!
Thanks
Ofiaich
Your best bet is to do it slightly differently.
I assume your Exchange 2003 SP2 or 2007?
If so I assume you have an OWA server setup? if not set it up.
Then just go into (on the device), activesync, Configure Server, pop in the internet name of the server running OWA, pop user/pass in, then the rest of the settings as you want them
This has benefits over syncing with Outlook, the majour one being live mail (push mail).
One downside is (depending on your lan config), that the internet name of the server will not be accesable through WiFi on the same lan. To fix this make sure your DNS server knows the internal IP of the server, and map it to the internet name (i.e. if you internet server is mail.my.com then tell your internal DNS server to map that hostname to the internal IP).
After having push mail, you wont go back....
Hi the_ape!
thanks for your reply... I don't understand all, but I will work on it!
I use Outlook2007 on my PC and it connects to the university's
owa.name_of_uni.ac.uk
I wanted to see if I could synch with the server, download emails, reply, add contacts or calendar items, and deal with them at leisure, but when I am away from home.
I know I can use PIE or Opera to go to owa.name_of_uni.ac.uk but I think a gprs connection remains active...
I could see that Microsoft email push is an option on my phone but this is all new for me!
Ofiaich
Setup on Outlook 2003/2007:
If you have an existing Outlook profile, follow steps 1-4..otherwise skip to the next section. These steps are for XP based machine. If you have Vista it will be similar but not exactly the same.
1. In Outlook, go to File --> Import and Export --> Export to a file --> Personal Folder File (.pst) --> click on the root folder in this window and choose “select subfolders” --> Click Next --> click browse and choose a location and file name for your .pst file. I suggest the desktop. --> Click Finish --> Click OK.
2. Let Outlook finish exporting your data. This make take anywhere from 1 minute to 30-45 minutes depending on how much data you have (e-mail’s, contacts, calendar).
3. On your XP Machine, go to Start, Control Panel.
a. Make sure your Control Panel is set to Classic View (Upper left hand corner of the window). If it says “switch to Category view” then you are good, but if it says “switch to classic view” then you should click it.
4. Double click on the Mail Icon within the Control Panel.
a. Click on “Show Profiles”
b. You should see your profiles here, most people will have one one and it will be called “Outlook.” THERE IS NO NEED TO REMOVE THIS!
c. Click “Add” --> Type in a Profile name (e.g. Exchange 2007) --> Then proceed to step 1 below.
-----
1. If using Outlook 2007, At the prompt where you choose manual. If using 2003, ignore this part and proceed to the next step.
a. add a email account and choose Microsoft Exchange.
2. Microsoft Exchange Server:
3. Username: Full Name given at Signup.
4. then hit More Settings
5. then click on Connection
6. then click on "Connect to Microsoft Exchange using HTTP" and then click on "Exchange Proxy Settings"
7. then type in mail.(your server).com for the URL
8. make sure SSL is checked
9. click on fast and slow networks, and choose basic authentication
10. Click “OK” twice
11. Then click Check Name
12. And the username/password box will pop open
13. Type in (Your Server)/User (this user is your e-mail address. For Example: your email address is [email protected], this is johndoe)
14. Type in Password
15. Server Name and User Name should now be underlined.
16. Congratulations! You are finished!
Setup on your PPC Device:
----
1. Start -> Programs -> ActiveSync -> Menu Configure Server
a. Server address:
b. Tick on ssl connection if your server uses SSL
c. Username: name
d. Password:
e. Domain:
f. Next -> Finish
g. Sync & Njoy
----
Setup on MS Entourage
1. Account name =
2. Name = Your Name Given at signup
3. Email = your email
4. Accountid= your ID before @
5. Domain =
6. Password =
7. Exchange server =
8. Check that server requires ssl....
9. Uncheck everything under advanced.
10. It should now work!
First of all thanks for your jewel job
I would want to signal the fact that I have followed step by step the whole procedure for the configuration of the server exchange but when I go to cover on the check name unfortunately it doesn't recognize me the inserted password. But is the password that of my email?
Thanks
Thanks austinsnyc!
I have read thoroughly, thanks !!
What does this mean ! " First of all thanks for your jewel job "
I am already using Microsoft Exchange on my PC using Outlook 2007.
The exchange account is managed by the local university. So I think I do not need to worry about sections 1 and 2...
I think I have a stupid question!!!
How do I find my 'domain name' ? That is the only setting I have mssing!
Now wading through uni. info to see if I can find it!
ofiaich
ofiaich said:
Thanks austinsnyc!
I have read thoroughly, thanks !!
What does this mean ! " First of all thanks for your jewel job "
I am already using Microsoft Exchange on my PC using Outlook 2007.
The exchange account is managed by the local university. So I think I do not need to worry about sections 1 and 2...
I think I have a stupid question!!!
How do I find my 'domain name' ? That is the only setting I have mssing!
Now wading through uni. info to see if I can find it!
ofiaich
Click to expand...
Click to collapse
Usually it's the name_of_uni in your name_of_uni.ac.uk - if it doesn't work, you'll need to contact tech support at your uni to find out.
Hi Illrigger!
Thanks! I saw that too, on the university setup information.
On my Kaiser, that box is grayed out so I can't input it there !
I will keep at it!
Ofiaich
ofiaich said:
Hi Illrigger!
Thanks! I saw that too, on the university setup information.
On my Kaiser, that box is grayed out so I can't input it there !
I will keep at it!
Ofiaich
Click to expand...
Click to collapse
once you put that @ sign in the user name feild the option for domain disappears. this is something new with wm6. so just try your email address and password without the domain. see what happens. it should work.
Yeah should be fine, you have a choice of using either the domain name, or the @ sign.
basicaly the domain name is everything after @, so username AT domain name
Let us know if there is a problem...
Oh to make sure that the Uni has the functionality turned on, try going to domainname/Microsoft-Server-ActiveSync
It should come up blank on a web browser, but that is the WebServices folder for this functionality.
Hi the_ape!
could you explain this last bit more please....
the_ape said:
Oh to make sure that the Uni has the functionality turned on, try going to domainname/Microsoft-Server-ActiveSync
It should come up blank on a web browser, but that is the WebServices folder for this functionality.
Click to expand...
Click to collapse
because, my university often does not want to support anything other that on-site, residence and dial up services!
with 'try going to' - how am I doing this? frm a PC, Kaiser ?
If I look at my Kaiser I can see ----
Programs > ActiveSynch > Meu > Configure Server ...
I have checked the server name, but the Kaiser took this information from the PC when synching with Outlook 2007.. I feel..
SSL is ticked.
Next -
User name is [email protected]_uni.co.uk ( it is not my email address. )
Password is correct and I re-typed it...
Domain - is light green, and cannot receive input.
save password is ticked.
Advanced -
If there is a conflict - Relace Item on my Device
Event logging - none
Connection - Internet ( only internet available. )
Next
Edit server settings -
All are unchecked - Contacts, Calendar, E-mail, Tasks ... because, for now, I synch to the PC's Outlook 2007. But I have experimented with these and get the Support Code - 80072ee2
Menu > Connections show USB only.
I know, when I am at home, my Outlook2007 on the PC is kept synched with the Exchange Server.... so yes, don't need this...
But I am hoping to do this via WiFi... at University or other WiFi hotspots.
Sorry to be so unclear !
Another edit - if I click on ActiveSynch - Tools - Advanced Tools - Get Device Certificates................. There aren't any!
Ofiaich
quick question, if the name of the exchange server is different the first time you connect to it (i.e. "autodetect.name of univ.edu"), should we use that or the exchange server address AFTER it has been initially configured?
Doug2873
I got a feeling that you are correct because I got the Microsoft Exchange Server working now....
Outlook 2007 PC address on the PC was different to what I input to synchronise with my Kaiser !
Attachments in Hotmail still do not work, but don't care...! The email throught M.E.S. gives what I need !
Ofiaich
did you get it working?
Hi navigater!
I got the Microsoft Exchange server working,
but not attachments in Hotmail Live email.
Ofiaich

Unable to access windows shares over WiFi

Hi,
Im trying to access windows shares on my windows 2003 server, but no matter what I do Im unable to get through.
Im using Resco File Explorer, and I can see the server and even access the FTP server on it, but for some reason the windows shares dont work. I get different error messages, but basically they say "Cannot connect shared path : Unknown error.".
Im able to connect to the shares from PCs across the network, so the server config should be ok.
Please advise.
Your Win2k3 Server is certainly a domain controler. Domain controler require SMB Signing to get someon authentificated. As Windows mobile doesn't support SMB signing, the only way is to have it disabled on the server through GPO
Thanks m8.. With your hint and google I was able to find the following, which did the trick:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanManServer\Parameters
Value Name: EnableSecuritySignature
Data Type: REG_DWORD
Data: 0 (disable), 1 (enable)

please help me w voip on duttys 6.1

well i created an acct w voipcheap and i have been trying to use it with my tilt..everything goes fine on my today screen it sas voipcheap seleted however when i try making a call i hangs up right away..ideas please help asap
chatterbox1990 said:
well i created an acct w voipcheap and i have been trying to use it with my tilt..everything goes fine on my today screen it sas voipcheap seleted however when i try making a call i hangs up right away..ideas please help asap
Click to expand...
Click to collapse
I take it you're using Schap's VoIP software. I had the same problem, but managed to fix it (I'm based in South Africa though). You must get the correct SIP settings from your provider.
My settings is based on Telfree South Africa -
Provider name: Telfree
User Account: Your IP Number (without starting 0) ie. 8775XXXXXX
Password: Password given by provider
Registrar Address: sip99.telfreesa.com
Port: 5060 UDP
Proxy Address: sip99.telfreesa.com (though proxy address is not required...)
Port: 5060 UDP
URI Address: Your IP number @ Provider SIP Address - ie. [email protected]
I noticed that the program automatically put "sip:" in front of the address in URI Address while you enter your account info - ie. "sip:[email protected]". I simply removed the "sip:", leaving just "[email protected]". This solved my problem and hope it will help you too...
yea i tried that it wasnt working though...anyone know any voip provider thats for free calls in us that works on the tilt please?
yea i got voip to work after testing out like crazy thank god now to just work on the internal speaker stuff
VOIP problems
Am also having problems getting the internet calling to work with Dutty's 6.1 ROM. Can anyone else shed any light on anything stupid I've missed?
-Fresh install of Dutty's 6.1 release
-Using Schap's VOIPsetup util config the SIP settings. Am trying to use Draytel but have also tried numerous services. Service details are draytel.org/5060 with no proxy.
-Whether trying to connect via 3G or Wifi, I get a 'Draytel: Searching' and then 'Draytel: No Service'. I can confirm the SIP service is active and can connect with identifical settings via a seperate softphone app so is definitely something config related.
What am I missing? Have search the forum high and low and no-one seems to have addressed this particular problem. All and any help appreciated.
Thanks.
hers what i did...for me voip setup didnt work so i downloaded sip config tool put in everything..i saved it..afterwards i went back into VoipSetup and i removed the "sip:" in the uri area
Unfortunately I've tried that already - didn't work. Any other thoughts?

[Q] Authenticate on Intranet websites?

I would like to use the xoom to view web pages on my companies intranet site when I am connected to the internal wifi. When I connect to a web page with the browser, I am promted for my login details. No matter how I try and put them in, I seem to be unable to connect. I have tried specifying my user name:
user
[email protected]
domain\user
When using a laptop not joined to the domain, I can use [email protected] or domain\user.
Does anyone know how I can connect to these secured sites? Is there another browser I should use or is this some kerberos/android incompatibility?
For me I just have to use my company email address
Sent from my Xoom using XDA App
id try out firefox if your are still having problems
we have a staff intranet, and I can log in using my normal username and password. must be the way you guys have it configured. sorry not much use, but just +1 for "works for me".
padanfain said:
I would like to use the xoom to view web pages on my companies intranet site when I am connected to the internal wifi. When I connect to a web page with the browser, I am promted for my login details. No matter how I try and put them in, I seem to be unable to connect. I have tried specifying my user name:
user
[email protected]
domain\user
When using a laptop not joined to the domain, I can use [email protected] or domain\user.
Does anyone know how I can connect to these secured sites? Is there another browser I should use or is this some kerberos/android incompatibility?
Click to expand...
Click to collapse
I have the same issue, I would like to log into my sharepoint site but I get a user/pass/domain auth challenge that no matter what I enter comes back incorrect.
I designed and installed and currently maintain the global network for my company, and I can tell you, we've had success with our Android OS users authenticating.
If the default authentication (domain\user) doesn't work, try using the FQDN of your domain (may not be a .com). If you work for XYZ Corp, you may have e-mail address [email protected], but your authentication may be [email protected]
You can check your domain info (provided your Exchange admin hasn't removed it) on your GAL contact card. Open Exchange (webmail or Outlook client) and open your contact card (search the GAL for yourself). Look under the "E-mail addresses" section). If you see something other than a global TLD (.com, .net, ...), you may want to try it. Alternatively, from a domain machine, type ipconfig /all and check what your DNS suffix is. That should get you rolling.
Worst case, check w/your IT department and see if you work with jerks or cool people Review access logs with them from your intranet site and see what username your device is sending. If you'd like, I can provide a simple Windows-based authentication site for you all to test, I will post and review logs with you.
Let me know if you want me to, I'll set up a website.
The stock browser doesnt support anything but basic authentication apparantly
Use firefox and it works
Firefox does seem to work, but the default browser is way better for all other things... oh well.

twc app. port forwarding

I copied and posted my original post via the nexus thread. i thought i'd repost it here since i'm guessing some of the other note users may have done this too. Any help would greatly be appreciated. Please note that I got the app to work with my stock rooted rom. Now i'm just trying to get it to work on any wifi network as opposed to just my home wifi network.
Originally Posted by colbyrainey View Post
Sure!
1. Install CopSSH for Windows from here:
http://sourceforge.net/projects/sere...r.zip/download
2. Extract the .exe file from .zip file and run the setup. During the setup, you will be prompted for a username and password, make sure you specify this and make it something you can remember (you will need it later).
3. Activate a user by going to Start->All Programs->CopSSH->1. Activate a User. Select the user you just setup in step 2.
4. Type in and confirm a passphrase (make sure you remember this). Then click activate.
5. Now you need to allow an port exception through your Windows Firewall. Standard SSH port is port 22, so that's what I used. You can do this by going to your control panel, selecting Windows Firewall, and click "allow a program through Windows Firewall."
6. Select Add port...name it SSH and enter port 22.
7. Click change scope...and make sure the radio button that says "Any computer (including those on the Internet) is selected. Click OK.
8. Now we need to setup port-forwarding to your router. To do this you need to know how to access your router, your WAN IP address, and your LAN IP Address assigned by your router.
9. To find out your LAN IP address, open a command prompt and type in "ipconfig -all". Typically, it will begin with 192.168 unless you have modified your LAN settings. To find your WAN IP address settings, google "what is my IP address?" There are a number of sites that can tell you that.
10. To access your router, you need to find it's IP address, which is usually 192.168.1.1 or 192.168.0.1; you will know by entering one of those addresses in your browser and it will prompt you for your login info. If you don't know your user name and password, I can't help you there but Google may be able to (try to look-up the default username and password for your router model).
11. Once logged in, find your "virtual server" or "port forwarding" settings, specify port 22 - 22 for the start and end range, and route it to the LAN IP address you found in step 9. Save your settings and exit your browser.
12. If you've made it this far, your SSH service and port forwarding settings are done; now you just need to log into it. Download SSH Tunnel from the Google Play Store.
13. When you open it up, it will ask you for a number of settings. I have listed them below and what you need to enter in each textbox:
- Host Name: Enter your WAN IP address that you discovered in step 9.
- Port: Enter "22"
- Username: Enter your username you specified in CopSSH
- Password: Enter your password you specified in CopSSH
14. Make sure the following options are checked:
- Use socks proxy
- Global proxy
15. That's it! Now scroll to the top of the app and check the first checkbox labeled "tunnel switch" and it should connect you.
Please keep in mind that you need to be logged into a wifi connection, but it doesn't have to be your home wifi connection!
DON'T forget the thanks button!
Lkrfn5283:Thank you for this post. I'm unsure what i'm doing wrong but i went over the instructions and made sure i did everything correctly, but it keeps saying "error: cannot connect to host" I'm using a tmobile galaxy note with a stock rooted ics rom. This write up should apply to any phone with an ics based rooted rom correct? any help would greatly be appreciated as i'm completely lost on what i did wrong.
*note: on step 11 it shows two areas where you can enter the IP address and start port/end port. One is labeled "internal" and the other is labeled "external". On the internal i input my WAN IP and ports starting and ending in 22. On the external I input the remote address and the local port/remote port as the starting and ending ports given by the sshtunnel app.

Categories

Resources