I'm running into a somewhat frustrating problem with making bluetooth calls on my AT&T Tilt.
(For reference, my Tilt has been reflashed with austinsync's 145mb bigstorage ROM, but the problem I'm going to describe ocurred on the original stock ROM, as well)
Periodically, when I make outgoing calls, the call will disconnect within the first minute. Upon watching the problem closely, I realized that my bluetooth kit (Acura HFL, preinstalled) always showed the calls as "Connecting" and not "In Use" when the problem ocurred. Any time the display said "In Use" I found the calls were not disconnected (unless I hit an actual dead spot)
What I've concluded is that the Tilt is not consistently setting the bluetooth flag that indicates that a call is in progress but, instead, conitnues to transmit that the call is connecting. For many bluetooth headsets, this is an irrelevant distinction; however, some handsfree kits (such as myself) will disconnect on their own if a call is not connected (or reported as connected) within a certain time. A variation of this problem has occurred with random calls initiated from my handset - in those cases, the call gets transferred to my handsfree only if I initiate a "transfer" command from the bluetooth kit; however, if the "call in progress" flag is not set corretly, the handsfree kit assumes that there is no call to be transferred.
In all cases, when my outgoing call was answered, the Tilt, itself, displayed that I was connected, and began running the timer. The problem seems to be limited to having that status transmitted via bluetooth.
I've already tested my handsfree with several other phones; the anomaly appears to exist with the Tilt only.
Incoming calls appear to be immune from this wierdness.
Has anyone else encountered this issue? I'm assuming this isn't a hardware problem but, instead, a bug in the BT stack. Any thoughts on a workaround? Anyone try Jetware with the TIlt/Kaiser? Any guess if that might solve the problem?
Thanks for any thoughts on this!!!
AMG
Spent an hour on the phone with AT&T and then HTC today - they were able to replicate the problem - So I guess there's a fighting chance of getting this resolved somehow, some day... Anyone here think there's a chance of a homegrown fix from this community??
BMW i_Drive has this problem
I too have noticed the problem. My BMW screen shows "Connecting" after I turn the car on, and it stays that way until I do a soft reset. It also seems to freeze the BMW system. It is not every time, but often enough to be frustrating.
We W8z I guess
No issues on my 2003 5 series BMW. I'm running the HTC TyTN II ROM however. I wonder if this makes a difference...
Camstech said:
I too have noticed the problem. My BMW screen shows "Connecting" after I turn the car on,
Click to expand...
Click to collapse
I've noticed an intermittent failure to connect on bluetooth on my Honda too. If I soft reset the Kaiser - I get a BT connection no problem.
Odd!- Lets hope some brightspark in these forums fixes it ASAP! I'd been blaming PhoneWeaver - Ooops
Graham
I've got exactly the same problem with the original (shipped) english ROM and my new Audi A6. If the outgoing call shows "Connecting", the call is terminated any time between 4 minutes 30 seconds and 4 minutes 55 seconds after the call has begun.
I also use Jetware Software to access/synchronize the phone's contacts with the car. I was going to blame them, but it turns out we might have a problem in the WM bt stack... What I read this evening on their (Jetware) support forum: If the phone is connected with a power cable during the call and the screen is left on, the disconnects don't seem to occur any more. If that's true, we're probably looking at some kind of power saving "feature". And who knows, maybe there's a nice registry key ... that said, I'm going to try this out tomorrow and let you know.
By the way: Incoming calls are no problem at all. They show as "Connected" in the car's display, though.
fermin said:
I've got exactly the same problem with the original (shipped) english ROM and my new Audi A6. If the outgoing call shows "Connecting", the call is terminated any time between 4 minutes 30 seconds and 4 minutes 55 seconds after the call has begun.
I also use Jetware Software to access/synchronize the phone's contacts with the car. I was going to blame them, but it turns out we might have a problem in the WM bt stack... What I read this evening on their (Jetware) support forum: If the phone is connected with a power cable during the call and the screen is left on, the disconnects don't seem to occur any more. If that's true, we're probably looking at some kind of power saving "feature". And who knows, maybe there's a nice registry key ... that said, I'm going to try this out tomorrow and let you know.
By the way: Incoming calls are no problem at all. They show as "Connected" in the car's display, though.
Click to expand...
Click to collapse
No luck. Whether it's connected to the power or not, screen off or on, no change in behaviour.
I"d like to chime in on this but I know I probably shouldn't, mainly because I haven't used the phone to make a call in my car long enough.
I had an '04 TL and my Tilt paired and worked fine on it. In the 3 weeks I had the phone, there was only one instance where the phone dropped its BT connection and I had to pick up the handset. All of my calls have been anywhere from 1 min. to around 5 min. I can't recall making any calls longer than that.
Just recently, I traded my '04 for a '07 TL. It paired up easily, voice recognition is a lot better, and my calls come in more clearly than in my older TL. Again, no conversations longer than 5 minutes. I may try to have a longer conversation on my drive home today to see the response.
Thanks for the heads up. I'll definitely keep an eye out for some of the symptoms you're experiencing.
I too have this exact problem. I have an '07 TL Type-S, and an AT&T Tilt. My phone worked fine until the 2nd official WM 6.0 release back in February, then it started exhibiting these exact symptoms. I'm now using Dutty's WM 6.1 and it is still happening but not as much. Hopefully we can get this fixed someday!
Does Bluetooth relate to the radio version? I wonder if I could get a WM 6.1 with an older radio if that would fix the problem?
Related
Hi everyone. I have had my Tilt for 4months now and it has given me a lot of joy. I have flashed and reflashed with no problems at all. I am currently using Schap's 4.31 Rom with 1.27.12.11 radio.
About a month ago i installed a new car stereo that has bluetooth connectivity with my phone - worked like a charm, paired very easily and generally appeared to be working with no probs.
Then i noticed that if i was in a bluetooth conversation and somebody else was calling (on call waiting), if i switched calls i could not hear anything, and if i ignored the second call, when the person on call waiting hang up, both conversations were terminated. I thought it was odd, but i just deactivated call waiting and thought, "let them try calling me later".
The other, a lot more serious problem, is that sometimes, randomly as far as i realised, the phone will go totally silent - incoming calls won't ring, and when i try to make a call, when i press "talk" then phone does not make that beep that it makes when an outgoing call is initiated. Should the person i call pick up i cannot hear them at all.
A soft reset takes care of this problem, but it has happened to me 3 times already, and i think it was after a bluetooth call.
Has anybody faced this problem before? I need to be available on the phone 24/7 due to my work and i really need to find a solution for this. Yesterday afternoon i took a nap for 45 minutes and had six missed calls that i never heard cause the phone never rang.
The phone is always on "ring" and at full volume.
Any ideas would be welcome.
Thanks
Alkis
Same issue
I'm assuming since I also am facing this same problem that it is not uncommon. It seems to me that it happens after a bluetooth device is turned off. Somehow it sets the volume on everything to mute. I thought only a soft reset would fix it until I discovered that it was just shutting off the volume. Still annoying, though.
Tilt problems with phone going silent
This problem has occurred with my phone every since upgrading to the WM 6.1 and it is related to a bluetooth device being hooked up. Often when someone calls the ringer will go from vibrate to on, but the volume turns all the way off. It will then cycle to off completely. The cycling occurs when a call comes in or when I hang up. I can stop this problem from happening by disconnecting the bluetooth head set. I have tried three different headsets and the problem occurs with all of them (Jawbone I, Jawbone II, and Plantronics) so I know it is not the brand of headset. HTC said to try a download of a screen dimmer problem, but have not done that yet. Anyone have any better advice?
did u guys ever find a solution to this?
its quite annoying missing calls because my phone decides to go silent for some reason
Same issue with GPS
I have the same issue, even when using software that accesses the GPS via bluetooth port. Muting is irritating, but at least voicemail catches messages. What really bothers me is that sometimes the mute is turned off and the volume up, especially when in a private meeting where we do not want interruptions
Gregg
HTC Tytn II bluetooth causes silent setting
I too have had the issue where my phone will go into total silent mode after using my bluetooth stereo hands-free feature. It doen't happen after using my bluetooth headset though.
It happens pretty regular that after using the bluetooth hands-free of my JVC car stereo that when I take the phone elsewhere it is totally silent. no ringer, no alarm (Ptravel alarm is what I use), no audio if I make a call (or receive a call).
It also will cause the phone to be silent on subsequent calls on the bluetooth stereo hands-free: ie: I take a call, hang up and another call will come in and I can answer it but have no audio.
My Tytn II is running the HTC (AT&T) WM 6.1 upgrade. The only thing I have done is use the Advanced configuration manager and the Kaiser tweak to change a few settings for performance and visual enhancements.
I see others are having the same problems.....Has anyone else used the tweaks and maybe that is root of the problem?
Has anyone discovered a fix (really important). My only options are to soft reset every time I get out of the car or not use the JVC bluetooth capability (which is why I replaced the stock radio in the first place).
Thanks
Hi rrackman,
I'd advice for you to look at the following thread:
http://forum.xda-developers.com/showthread.php?t=438457
It's quite long, so better subscribe to it and wait for responses. Several people with Tilt's have the same problem. Myself I have a JVC NX-7000 and an unbranded Kaiser (HTC TyTN II). It works fine with WM6.0, but I have the same issues you mention with WM6.1. First advice while we're searching for the solution: downgrade to WM6.0...
Regards,
Nika.
Is there a solution to this problem?
Try WM6.0 ROM - check out the thread I mention in my sig.
Regards,
Nika.
I did indeed take a look at the thread you linked earlier. Sorry for making the quick post earlier, I should have mentioned that this is regarding the "unexplained volume drop to zero" symptom, not the NSI symptom. Fortunately I don't have the NSI problem, just the drop to zero problem.
Of course downgrading to 6.0 would be the key solution, was just hoping to find a way to avoid doing just that. My phone never had the problem prior to 6.1 and was running the exact same list of applications and settings.
Hi,
When my phone is connected to my car kit (Opel/Vauxhaul UHP) bluetooth sometimes stops randomly. I can turn bluetooth on again with the commmanager and everything is working again. But it can hapen again after a few minutes.
Does anyone have this problem to or even better a solution?
I allready tried all the different Radio Roms, but this didn't solve my problem.
Well with mine i have some hickus but it just happpends once a while.
Most irritating about Diamond and BT in my opinion is that wa have no equalizing for it. and the sound setup from the begining is horrible.
Asked here if anyone has a solution before but none replied.
But as far 2 your problem no. And i use a Pioneer system in my car.
Mauser.NET said:
Hi,
When my phone is connected to my car kit (Opel/Vauxhaul UHP) bluetooth sometimes stops randomly. I can turn bluetooth on again with the commmanager and everything is working again. But it can hapen again after a few minutes.
Does anyone have this problem to or even better a solution?
I allready tried all the different Radio Roms, but this didn't solve my problem.
Click to expand...
Click to collapse
HI
Same was happend with me (Opel), when my battery is low.
orsiga said:
HI
Same was happend with me (Opel), when my battery is low.
Click to expand...
Click to collapse
Mine is not low on battery, but I shall try it once connected to the cigarette lighter.
Nobody else has this kind of problems??
Mauser.NET said:
Mine is not low on battery, but I shall try it once connected to the cigarette lighter.
Nobody else has this kind of problems??
Click to expand...
Click to collapse
I've a JVC head and my bluetooth has no problem.
I have a Honda Accord with handsfree built in and I too am having problems. The phone and car both agree that a connection has been made but when i use it to either ring out or receive a call the radio mutes and when receiving the ringing tone sounds over the car speakers but I can`t hear the caller except on the phone which isn`t very useful. Would a ROM or radio upgrade help or is it just a compatibility problem
davemazo said:
I have a Honda Accord with handsfree built in and I too am having problems. The phone and car both agree that a connection has been made but when i use it to either ring out or receive a call the radio mutes and when receiving the ringing tone sounds over the car speakers but I can`t hear the caller except on the phone which isn`t very useful. Would a ROM or radio upgrade help or is it just a compatibility problem
Click to expand...
Click to collapse
I had this kind of problems also. Also syncing the phonebook gave me problems. You could try JETware, this solved almost all my problems, except now the bluetooth crashes
Mauser.NET said:
I had this kind of problems also. Also syncing the phonebook gave me problems. You could try JETware, this solved almost all my problems, except now the bluetooth crashes
Click to expand...
Click to collapse
Thanks Mauser. I tried Jetware as you suggest and I`m afraid it didn`t help in fact I think it crashed the handsfree system in the car like you. This is the final nail in the coffin for my Diamond. I just can`t get used to it so it`s off to Ebay with it.
davemazo said:
Thanks Mauser. I tried Jetware as you suggest and I`m afraid it didn`t help in fact I think it crashed the handsfree system in the car like you. This is the final nail in the coffin for my Diamond. I just can`t get used to it so it`s off to Ebay with it.
Click to expand...
Click to collapse
I'm sorry to hear that
I am very pleased with my Diamond... I would sooner put my car on eBay than my Diamond
Did you try to check almost everything on in the advanced settings of Jetware? I have also limited the phonebook sync to max 5 entries to debug and on the site of Jetware there wat a fix for Opel car kits.
Keeping my fingers crossed, but until now I haven't experienced any bluetooth crashes.
Mauser.NET said:
I'm sorry to hear that
I am very pleased with my Diamond... I would sooner put my car on eBay than my Diamond
Did you try to check almost everything on in the advanced settings of Jetware? I have also limited the phonebook sync to max 5 entries to debug and on the site of Jetware there wat a fix for Opel car kits.
Keeping my fingers crossed, but until now I haven't experienced any bluetooth crashes.
Click to expand...
Click to collapse
Thanks again Mauser. I tried various settings but without any success, I think the phone is just not compatible with the Honda. Having said that I don`t have much luck with bluetooth at all on the phone. More often than not It just won`t detect other bluetooth devices and when it does it won`t send or receive files so it`s time for it to go and I can go back to a trusty Nokia
Problems here with BT connection to car kit, too. I'm using the built-in car-kit of an Audi A4 (standard one not that with navigation, remote SIM, etc). I've noticed the following issues:
- when I try to make a call, the CD is cut off but NOTHING is heard in the car speakers UNTIL the other party answers the call (and then I start the conversation). No ringing tone, no nothing. I cannot hear the busy tone, or network failure/congestion tone and this is annoying since I have to keep an eye on the phone to see what's happening. I found myself checking the phone when, after calling someone, nothing happened and in fact I got a busy tone and the call ended.
- sometimes, when I receive a call, the CD stops playing but when I answer nothing is heard from the car speakers but only from the phone (as davemazo said also).
- when I receive a call, I hear in the car speakers a "standard" calling tone, not the ringtone I have assigned for that contact
I have to mention that with any Nokia I had before (and still have one as a second phone), these problems do not exist. I know there is a compatibility between Audi factory installed car-kits and Nokia, but BT is a standard and most of the functions should be supported despite the phone model/type. I've tried also with an iPhone and it's working great, as my Nokia do. I don't understand why it is like this with the Diamond. In fact, I think it is not related to Diamond itself...it's doing like this with ANY Windows Mobile device I've tried in the past (Orange C600, Samsung I600).
Are there any solutions for this? A CAB, a new BT radio, a software, anything?... I don't want to buy a new BT car-kit and try with different models until I find something compatible
Thank you for any info/tip
Rapier said:
Problems here with BT connection to car kit, too. I'm using the built-in car-kit of an Audi A4 (standard one not that with navigation, remote SIM, etc). I've noticed the following issues:
- when I try to make a call, the CD is cut off but NOTHING is heard in the car speakers UNTIL the other party answers the call (and then I start the conversation). No ringing tone, no nothing. I cannot hear the busy tone, or network failure/congestion tone and this is annoying since I have to keep an eye on the phone to see what's happening. I found myself checking the phone when, after calling someone, nothing happened and in fact I got a busy tone and the call ended.
- sometimes, when I receive a call, the CD stops playing but when I answer nothing is heard from the car speakers but only from the phone (as davemazo said also).
- when I receive a call, I hear in the car speakers a "standard" calling tone, not the ringtone I have assigned for that contact
I have to mention that with any Nokia I had before (and still have one as a second phone), these problems do not exist. I know there is a compatibility between Audi factory installed car-kits and Nokia, but BT is a standard and most of the functions should be supported despite the phone model/type. I've tried also with an iPhone and it's working great, as my Nokia do. I don't understand why it is like this with the Diamond. In fact, I think it is not related to Diamond itself...it's doing like this with ANY Windows Mobile device I've tried in the past (Orange C600, Samsung I600).
Are there any solutions for this? A CAB, a new BT radio, a software, anything?... I don't want to buy a new BT car-kit and try with different models until I find something compatible
Thank you for any info/tip
Click to expand...
Click to collapse
Hi Rapier,
I also had a SPV C500, MDA Compact, Qtek 8500, Samsung I600, HTC Touch Dual and now the Diamond. The only one which gave me no troubles was the SPV C500, but I think that was because this phone didn't support phonebook synchronization and had no network identification/signal strength over bluetooth.
After the SPV C500 it went wrong. First I noticed that after a hard reset it worked for a few days. Later (about 2 years later ) I found out that it was because the call history was going to long to sync over bluetooth.
Then I found Jetware in which you can limit syncing to any number of items. They even had a fix for the connection to my carkit.
Unit now... it works like a charm... but keep my fingers crossed
I don't know if your carkit is a Audi UHV, but I saw that they had a fix for that too! You have to just install Jetware and then run the fix-file from your phone. Good luck!!
P.S. I am in no kind related to Jetware, I just found out that it worked for me.
Yes, I have an Audi UHV 6634. Thank you for the info, I'll try that and post the results here. Though, my car-kit is not the advanced one and I don't have to sync anything with it (contacts or something else). It's most working as a plain hands-free device, no extra functions...speaking of which, I've noticed that on the phone is detected as "hands-free"...why not "car-kit" as I know a car-kit has other functionality as well? This is the "standard" BT device for any audio enhancements (even if it is a car-kit not a BT headset), or I have to activate something to be recognized as car-kit?
Mauser.NET said:
Jetware? I have also limited the phonebook sync to max 5 entries to debug
Click to expand...
Click to collapse
my Honda system doesn`t read the sim I can only dial out via handsfree using contacts i`ve entered into the Honda system otherwise I either have to read the number to the system and it will ring out (most of the time anyway) or make the call on the phone (illegally obviously) cancel the call and then say "redial" and the system makes the call. So uless I`m misunderstanding this setting I don`t think it will help me.
I`ve searched the Jetware website and I couldn`t find a fix for my Honda
UPDATE: So...I've downloaded it, install it on my Diamond (including the extension file for Audi UHV) and...no change. Everything as before with both issues. Disappointed, I've uninstalled Jetware then...surprise. AFTER uninstall, I can now hear through my car's speakers the ID ringtone Maybe some BT settings were altered and remained like this after uninstall, but I don't know why it didn't work when Jetware WAS installed...strange.
Anyway, many thanks...at least half of the problems are now solved and this only by install/uninstall a program...that's cool. I must now find a way to make the car kit ring when I make a call, this is still an issue.
P.S. I've seen that Diamond support Headset and Handsfree profiles...and when connected to my car kit is set as Handsfree. I suppose this is better than Headset...but still no ring out tone.
Rapier said:
UPDATE: So...I've downloaded it, install it on my Diamond (including the extension file for Audi UHV) and...no change. Everything as before with both issues. Disappointed, I've uninstalled Jetware then...surprise. AFTER uninstall, I can now hear through my car's speakers the ID ringtone Maybe some BT settings were altered and remained like this after uninstall, but I don't know why it didn't work when Jetware WAS installed...strange.
Anyway, many thanks...at least half of the problems are now solved and this only by install/uninstall a program...that's cool. I must now find a way to make the car kit ring when I make a call, this is still an issue.
P.S. I've seen that Diamond support Headset and Handsfree profiles...and when connected to my car kit is set as Handsfree. I suppose this is better than Headset...but still no ring out tone.
Click to expand...
Click to collapse
No thanx! I'm glad I could help
Mauser.NET said:
Hi Rapier,
I also had a SPV C500, MDA Compact, Qtek 8500, Samsung I600, HTC Touch Dual and now the Diamond. The only one which gave me no troubles was the SPV C500, but I think that was because this phone didn't support phonebook synchronization and had no network identification/signal strength over bluetooth.
After the SPV C500 it went wrong. First I noticed that after a hard reset it worked for a few days. Later (about 2 years later ) I found out that it was because the call history was going to long to sync over bluetooth.
Then I found Jetware in which you can limit syncing to any number of items. They even had a fix for the connection to my carkit.
Unit now... it works like a charm... but keep my fingers crossed
I don't know if your carkit is a Audi UHV, but I saw that they had a fix for that too! You have to just install Jetware and then run the fix-file from your phone. Good luck!!
P.S. I am in no kind related to Jetware, I just found out that it worked for me.
Click to expand...
Click to collapse
Hello,
I have a Mercedes car kit and facing the same issue as you: everything works perfectly for a few days when hard-resetting my device, even with my 500+ contacts (they are loaded in less than a minute), but after a few days/weeks I can't get to have my call history or contacts displayed in less than half an hour!
Yesterday I thought I'd just hard reset my device because I had this problem again, but unfortunately it didn't work!
Guess what I have done differently this time: yes, I backed up and restored my call history, which I hadn't done the previous times! So I guess it is indeed related to the call history, but I can't test for now!
I have installed JetWare and limited the call history to 5 numbers, I'll try this tonight and I'll keep you informed...
Hello,
So I have tested this yesterday (installed Jetware and limited the call history to 5 numbers), and now it works FLAWLESSLY! I can browse through my 500 contacts instantaneously when I pair my phone with my Mercedes car kit.
So, in my case it was also clearly the CALL HISTORY that was causing problems... A BIG BIG thanks to Mauser for pointing out this!
I'm also having problem connecting my Diamond to my Volvo S80. All the other functions work except that I could not hear the other party through my car stereo and I also could not diconnect the call with my car end key.
I'll try the Jetware and I'll report back later. Thanks for the pointer.
turt said:
A BIG BIG thanks to Mauser for pointing out this!
Click to expand...
Click to collapse
No thanx! ... glad I could help
Hello. I've been relentlessly searching everywhere for a solution to my plight.
My Diamond touch works fine for the first few incoming and outgoing calls but then all of a sudden there is no incoming or outgoing audio when I make or receive a call. I.E. the call connects but I can't hear the caller and they can't hear me. The phone still rings and caller display still works. Likewise I can still place a call in the normal way. Just no audio in either direction. Soft reset sometimes restores normal operation but sometimes a hard reset is required.
The phone was originally on UK Orange network but is now unlocked and running on UK O2.
I got to grips with flashing quickly enough and I have now tried upteen combinations of roms and radios but nothing seems to help.
Has anyone else had this problem ? Or better still managed to cure it ?
Any help or suggestions would be so so so appreciated.
Oh yeah just in case it's relevent.. The phone seems to work perfectly in every other way. wifi, bluetooth, 3G, gps etc. Battery life is a wee bit pants but I'm not too concerned about that.
Thanks in advance guys !
brianbelfast said:
Hello. I've been relentlessly searching everywhere for a solution to my plight.
My Diamond touch works fine for the first few incoming and outgoing calls but then all of a sudden there is no incoming or outgoing audio when I make or receive a call. I.E. the call connects but I can't hear the caller and they can't hear me. The phone still rings and caller display still works. Likewise I can still place a call in the normal way. Just no audio in either direction. Soft reset sometimes restores normal operation but sometimes a hard reset is required.
The phone was originally on UK Orange network but is now unlocked and running on UK O2.
I got to grips with flashing quickly enough and I have now tried upteen combinations of roms and radios but nothing seems to help.
Has anyone else had this problem ? Or better still managed to cure it ?
Any help or suggestions would be so so so appreciated.
Oh yeah just in case it's relevent.. The phone seems to work perfectly in every other way. wifi, bluetooth, 3G, gps etc. Battery life is a wee bit pants but I'm not too concerned about that.
Thanks in advance guys !
Click to expand...
Click to collapse
M8. I don't think you're on your own on this one. I have the same problem ...or similar. My phone pairs OK but drops the blue tooth connection usually on audio but quite often altogether. Re-pairing is a pain in the A$$. It's definitely a phone issue as I have the older qtek and a nokia that work with my kenwood system without a hitch but pair up the diamond and I'm pulling my hair out after 5 minutes.
I've tried the latest stable radio, setting pin code to 0000 & also turning off security but it still drops connection after an outgoing or incoming call.
Does anyone have a fix for this?
...and jetware 1.3 doesn't solve this either. Installed it the other day and pretty much the same ...audio is fine until a call is terminated and then it drops A2DP but sometimes stays connected on telephone. Other times both drop off!
bt stack
In my case it looks like the BT stack on the diamond is not compatible with the Kenwood DNX8220BT stack. I see quotes that HTC implemented their own stack for the Diamond so could someone put me out of my misery and tell me if it's possible to change the stack to something like that on the wizard as that works flawlessly with my Kenwood satnav?
ADD+
My phone does that weird thing too where I couldnt hear the other person on line. I have manage to found a quick fix for it tho.
Solution 1: During the call (when you notice you cant hear the other person), press the middle circle button (which will activate the screen if dimmed out), then press the speaker icon. This allows you to continue the conversation on speaker with the other person on line without having to soft/hard reset.
Solution 2 (works sometimes): During the call, reduce the volumn, wait a secnd or two, then raise it again.
Bt3030 - Shb6100/7100
Have the same problem with Philips shb7100 and shb6100. i also have tried the Jabra BT3030.
I used and test them on a Tyten and wizard no problem at all.
I had same problem before...found out is hardware problem...sent to htc care and after tat everything ok.
ADD+ said:
In my case it looks like the BT stack on the diamond is not compatible with the Kenwood DNX8220BT stack. I see quotes that HTC implemented their own stack for the Diamond so could someone put me out of my misery and tell me if it's possible to change the stack to something like that on the wizard as that works flawlessly with my Kenwood satnav?
ADD+
Click to expand...
Click to collapse
I have the exact same model (kenwood dnx8220bt and XDA ignito (diamond), same problem where everything is okay but when you go into the contacts menu and try to make a call, BT connection either drops or nothing happens when you try to make the call.... this is a joke.... how can my old HTC P3300 work with it without a problem and this newer Diamond flop like a fish...
any updates or news??
I've the same problem. No Sound after some call or others sounds play. When this happens and if I receive a call the others not listen my voice. This means that when audio disappear, speaker and also microphone not work, like the system can't comunicate with them. The volume control not resolve my problem. I've done HR and with nothing installed in my phone the problem come back again after few minutes. So it's not a problem of third part bad software, but htc orginal software or hardware problem.
Anyone solve it o have idea?
Thanks!
I join the list - having problems with my xcarlink which used to work with my P3300
Tried using A2DP Toggle which helped on the artemis but seems to have NO effect at all on Diamond
The Diamond does connect flawlessly to my jabra earpiece and my Sony ericsson bluetooth speaker
ninja_pimp said:
I had same problem before...found out is hardware problem...sent to htc care and after tat everything ok.
Click to expand...
Click to collapse
I have the same problem. Sent my HTC back twice for repair but still no solution. The first time they didn't found the problem, the second time they replaced the speaker.
What did they do with your phone to fix it?
According to this thread http://forum.xda-developers.com/showthread.php?t=431826 it is a hardware issue. The phone needs to go back to the supplier as it is faulty.
Hi all,
Need help with my HTC Diamond. As my Pioneer car navigation, with which the diamond bluetooth functioned well, was stolen, I was advised to mount a JVC navigation system NX7000 with a detachable front in order to prevent theft. However, the HTC bluetooth dysfunctions. It connects and pairs without problems, but when the diamond goes into sleep or is switched off, it is impossible to establish a phonecall using the JVC car-unit, although it indicates that blueconnection is still valid. When I switch on the phone, even minutes later, it will eventually do the call. If I force the HTC to remain powered-on it will function normally. I am sure that this has something to do with a suspend-mode of the diamond bluetooth part and that this can be solved by the right registry tweak. I tried several tweaks that I found on the forum already but without succes. I upgraded the HTC to the latest firmware 2.03 but no improvement.
I called with HTC and they said that they know the correct registrysettings but they won't supply them because of "licence restrictions"...........
Anybody the same problem? Somebody who has the solution?
Thanks
I have exactly the same problem! Incoming calls work fine, but like you, I cannot initiate outgoing calls from the JVC unit unless the diamond is turned on fully. I there's not a fix for this, I may have to go out and buy an iphone again after selling mine to get a diamond!
there is a fix but HTC won't tell. they suggested to open a thread on this forum in order to get suggestions on the matter. and so I did. When I subsequently asked them if they would post this solution on this forum they said they would not :-(
Bluetooth problems across the board with JVC NX7000
drpellypo said:
I have exactly the same problem! Incoming calls work fine, but like you, I cannot initiate outgoing calls from the JVC unit unless the diamond is turned on fully. I there's not a fix for this, I may have to go out and buy an iphone again after selling mine to get a diamond!
Click to expand...
Click to collapse
You may not want to fall back on an iPhone with the JVC NX7000. Not to go too far off-topic here, but pairing an single iPhone works great (once I figured out the overly complicated menus). BUT...it won't let me pair a second phone (of any kind). Once the first phone is paired, all pairing menu options are greyed out ("Search" and "Open"), thereby preventing any further phones from being paired. I first need to unpair the first phone before I can pair the second one. JVC Support is comically unhelpful.
Has anyone had luck paring more than 1 phone (of any brand) with the JVC NX7000?
You are the lucky one! You can succesfully pair one phone but it works
I don't care if I can only pair one phone. I only have one phone! lol.
Hey guys!
kind of the same problem here but with the Volvo built-in bluetooth solution. Actually when the device sleeps and I initiate a call it will take some time, then the device will turn on and it will begin to dial but drops immediately. When the device is fully turned on there is no problem at all. Incoming calls work just fine. Even though it first rings on the phone and after a second or two it will ring in the car and the device will stop ringing. Which confirms that bluetooth sleeps somehow and only connects fully when the device is fully awake.
It really looks like bluetooth goes to sleep, so we need a solution which keeps bluetooth awake even if the device itself is in sleep mode.
Patrick
Exactly the problem I described. It's a sleep or suspend mode of the bluetooth that causes the dysfunction. I can pair nokias wih JVC without any functional problem, they work like a charm. It is really a HTC related problem, I tried a lot of registry tweaks suggested for similar problems in other HTC devices, but no luck so far.
Reply to Guitartng:
storing multiple bluetoothdevices in the JVC for subsequent use can be done by selecting "new device" and then go to "bluetooth setup".
Exact same issue with a Kenwood DNX 8120 double din unit.
If anyone finds out the solution, please post it here. I'll keep searching.
Good News Lads!
Well after blowing my head of trying different roms and radios got a solution.
The solution comes from JVC stereo and not from Htc diamond Phone!
You have to set special phones To Samsung E520 and then pair device with the htc diamond. It works like a charm, know I can make calls through my JVC stereo and NO MORE deep sleep of htc diamond.
Try with samsung, it work for me, if not try with other phones in special phones before pairing!
Cheers!
I just wanted to let you know that I also was able to fix my bluetooth issue by flashing stock firmware 2.03.405.3 WWE with Radio 1.09.25.23. I was previously using Dutty's V4 which is based on 2.03 afaik, but it look like Dutty tweaked something on the bluetooth stby behaviour.
Anyway, it works like a charm now and the whole calling and answering process is also much faster!
Has anyone else been unable to make phone calls after connecting to your vehicle's bluetooth? Most of the time, I can make phone calls without issue. Sometimes, I can't even hear the call ring when I'm connected to bluetooth. Occasionally, when I turn my vehicle off, the call goes silent instead of transferring to the earpiece on the phone. The only way I can fix the issue is rebooting the phone. This has become increasingly frustrating for me, since the issue is so inconsistent.
I'm running the stock ROM, rooted and un-encrypted.
Thanks!
Same here
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I just got my N6 today and I'm having trouble with My Ford Touch as well. I can get it to pair and play music, but it won't "connect" to my phone. It's odd because my N5 works fine with it. I would assume the N6 wouldn't be different.
We probably have to wait for an update from Ford, which will probably take months...
EDIT: Well I decided to try it again. I deleted the Nexus 6 entry as well as the Nexus 5 entry. Went through the pairing process again and it worked as intended. Not sure what happened the first time.
I ran into the same problem as others where my N5 worked flawlessly with my Ford Sync in my fusion, but the N6 is terrible.
I love the phone, but this is really annoying. I get into the car and sometimes it connects immediately, other times I have to turn off and back on the bluetooth about 3 times for it to finally connect. Very weird. Ford offers an upgrade to my Sync system, but wants $50 to do the upgrade. Pass.
I might try what the other person did and delete all entries for phones and pair it again. Unfortunately, the weather is pretty bad outside, so it might need to wait a short bit.
Has anyone else had luck re-pairing with their car and had reliable connections?
I use Ford Sync.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I use Ford Sync, and everything works as expected. I am Stock and unrooted. I guess it would come down to what version of Sync. Mine is from 2012. No touch screen. I also delete all other entries on the system and start from scratch making sure that the N6 is the main device.
If I can wake up the screen on my own, outgoing calls work fine
PaisanNYC said:
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
Click to expand...
Click to collapse
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
androidfan91 said:
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
Click to expand...
Click to collapse
Since I last made that post you quoted, i purchased and installed a 2015 model of the Pioneer AVIC-8100NEX. It has Android Auto, but can be used with the regular Pioneer UI also. I have had no issues anymore with this new radio. Maybe the BT protocol in the radio is newer? Im not that tech savvy to know. But the 2015 radio had no issues with BT calls anymore, on Pioneer's UI or Android Auto's UI.