Hi all
I have Kaiser with WM6 ITA (default)
I would like use a bluetooth headgear, but i must start the bluetooth service that remain open and drinn more battery charge.
With my old Himalaya i solved the problem with the free "bluetooth tools (great!!!)" but with WM6 this software don't work.
I need a tool that actives the bluetooth only in incoming call, and, when finish calling, after some seconds, turn it off
PLEASE HELP!!!
p.s. sorry for my bad english
UP
Please, there is some regkey to set for activate BT only in incoming call, and toggle it of after some seconds that call ended?
Pls help
madness974 said:
Hi all
I have Kaiser with WM6 ITA (default)
I would like use a bluetooth headgear, but i must start the bluetooth service that remain open and drinn more battery charge.
With my old Himalaya i solved the problem with the free "bluetooth tools (great!!!)" but with WM6 this software don't work.
I need a tool that actives the bluetooth only in incoming call, and, when finish calling, after some seconds, turn it off
PLEASE HELP!!!
p.s. sorry for my bad english
Click to expand...
Click to collapse
Related
When you don't hear your calls and infact your call is in progress, this occurs normally in the morning when your unit take a nap in the night.
The solution is turn ON your bluetooth and then turn it OFF or just remain it to ON.
This problems occurs frequently who use bluetooth headsets.
I don't use any bluetooth headset and I still have this issue... can't ear anything...
So you say that your solution is valid? Great! I'll give it a try!!
anyone tried?
it works??
!Working! Solution
Remove BTTrayCE.lnk from Windows\StartUp, and the sound problem is solved.
To enable BT again, run Run_BTTrayCE_10.lnk and BT icon will appear.
To disable it again, u have to soft reset the machine.
Cheers,
Senator
THIS WORS FINE. I HAVE THAT SYSTEM WORKING IN MY 9090, FOR 2 MONTHS ALMOST AND THE PROBLEM GONES.
REGARDS
BY THE WAY, I FOUND THIS PROGRAM THAT IS THE SAME OF WINDOWS XP TASK MANAGER, TO POCKET PC, THAT ENABLE YOU TO END THE PROCESS WITHOUT RESET.
Please can someone give a solution for this "no hearing the caller" problem!!!! Otherwise I can't use my qtek 9090. Everytime to switch the BT on and off isn't real solution.
My solution works...
yes but is that a real solution. I mean it' s not a real automatically solution. everytime I want to use BT I have to start it. is a radio update to 113 no solution?
Haven't updated yet, try it.
Don't use. Users reports, that it worse, than before.
Attachment deleted
Old post:
In the old days of WM5 on BlueAngel there was a problem with BT driver:
- it doesn't properly wake up after device suspend/resume
- it was unusable as hands free if device is in the suspend mode.
There is a good fix: http://forum.xda-developers.com/showthread.php?t=267389 but device wakes up randomly.
I have no advanced hands free device (simple bluetrek G2). Could anybody check attached CAB and provide some feedback?
BT is still on after pressing power button on/off
BT device can wakeup BA.
I cann't test more
baniaczek said:
In the old days of WM5 on BlueAngel there was a problem with BT driver:
- it doesn't properly wake up after device suspend/resume
- it was unusable as hands free if device is in the suspend mode.
There is a good fix: http://forum.xda-developers.com/showthread.php?t=267389 but device wakes up randomly.
I have no advanced hands free device (simple bluetrek G2). Could anybody check attached CAB and provide some feedback?
BT is still on after pressing power button on/off
BT device can wakeup BA.
I cann't test more
Click to expand...
Click to collapse
I may just be thick, but I don't understand what this cab does as opposed to the Big Mike fix, and I don't understand what exactly you want us to test. I have a Motorola HS850 which I use all the time as my hands free device. I'd be glad to test if you explain what you want me to test.
motisu said:
I may just be thick, but I don't understand what this cab does as opposed to the Big Mike fix, and I don't understand what exactly you want us to test. I have a Motorola HS850 which I use all the time as my hands free device. I'd be glad to test if you explain what you want me to test.
Click to expand...
Click to collapse
cab contains only bthuart.dll (like big_mike patch), It replaces big_mike patch.
It looks, that:
- BT still works
- BT properly wakes up when BlueAngel wakes up
- BlueAngel doesn't wakes up randomly
- after pressing power off: BlueAngel can be woken up using hands free.
I can't check:
As I can understand: advanced hands free can be used to: dial (or redial) using only hands free. I don't know if it was possible without this patch. If yes - I can't check if this possibility still exists.
I can't check quality of the sound.
I can't check if BT stereo headset is still working after using this.
If redial still would be possible, quality would be the same and stereo would work - I would replace big_mike patched bthuart.dll with this one. BlueAngel would't wake up randomly anymore.
I've tryng it now, i'll post any feedback later.
Thanks and regards
I've used H1.4.Ban.R1 (lazy to flash new one) + NOKIA LD-3W /GPS and BT is working like the old one.
BA wakes up randomly, ..., everything remains the same.
To me is no good. Every time turn off/on bt is off. (loke before bikmike) and when my headset is connect it's impossiile to disconnect it . (i've to call and stop calling to disconnect my headset).
For now i coe back to old dll.
Regards.
Strange
Thanks for feedback
I'm deleting it.
baniaczek, while you're looking at BT, let me remind you the problem I have when trying to use a BT stereo headphone with Windows Media (or with another player, for that matter): alas, it doesn't work...
By the way, I have no problem at all with BT when using the same headphone as hand free, or when using a GPS device... the only issue is with music...
Thanks again for your huge work!
Hi baniaczek,
i have tried it and it seems that the problems still exist.
Actually using it over the ROM created by your kitchen, made the use of BT difficult:
- It turns the BT off after the PDA is powered on.
- It turns on the PDA randomly, more frequently than before.
Cheers
Chris
I have searched the net for a few days now and can't find anything about my
little problem.
I have as a carkit a VDO/DAYTON TR 7327B radio, when I pushed the phone button on this device it is connecting to my Kaiser and starts always dailing the last known number.
Every other bleutooth device is starting the voice dailing.
I have tried several changes in the registery, which I found on this forum but all with no success.
The Dayton has as sevices - Headphone and Stereo, the registery shows in the hardware status that a handsfree is connected and not a Headphone, could this be the problem?
It is not my intention to install another ROM.
Found the problem, the problem is the car radio.
VDO/DAYTON sels this car radio with on the box "handsfree" and yes they
are correct when you only want to answer calls and not when you want to make a call.
So I need a new carkit.
I'm using my Diamond on my bike through a blue tooth connection to my intercom. Works like a charm - but when the phone rings, music (and GPS) sound is muted, and don't come back when the phone call is ended. The only way to listen to music again is to disconnect the blue tooth connection and start it up again.
Also when using GPS (Tomtom 7) it disconnect the phone call if there is a direction instruction.
Minor problems, but is there a work around?
[Solved]. I downloaded a program http://www.freewarepocketpc.net/ppc-download-btmusic.html
This does all what I'm asking for.....
My Diamond uses the latest rom version (1.93.7 something)
How do you do ?
Hello,
I'm a new user with a Diamond: How do you do, to put the Tomtom sound on the bluetooth audio ? I'm using an Airoh W-Conn system.
I have a Diamond with a Orange France ROM, and my Tomtom 6.
Thanks in advance,
Alex.
DonĀ“t steal my thread ;-)
Please make your own thread.
If you have a problem with your Diamond, it is better to adress the problem directly. I do not have a clue for you. I just turn the gizmo on - and it works. You could read the manual to TomTom7. There is a section about Blue Tooth a.f.a.i.r.
pepitoalex said:
Hello,
I'm a new user with a Diamond: How do you do, to put the Tomtom sound on the bluetooth audio ? I'm using an Airoh W-Conn system.
I have a Diamond with a Orange France ROM, and my Tomtom 6.
Thanks in advance,
Alex.
Click to expand...
Click to collapse
Use the program http://www.freewarepocketpc.net/ppc-download-btmusic.html
It will do the trick.
Your bluetooth disconect when you use your handsfree in your car????
Then try this software: JETware Hands-Free Extension 1.31.
I have four days without disconect.
(sorry for my english).
UPDATE 27-07-2009:
Versions of JETWARE:
1.11 (ShareWare)
1.20 (ShareWare)
1.31 (ShareWare)
1.31.178 (ShareWare)
1.40 (FreeWare??)
the good: The program solutions the disconnects of the bluetooth
the bad: BUT, in my handsfree (Saab 9-3 2008), i can make a call but i cant cut a call (i must to cut the call in the phone)
and if i uninstall i lose mi contacts in the car.
It is not perfect.
Hopefully this works mate.
Gonna try now & report back later
Cheers
Hopefully this works mate.
Gonna try now & report back later
Cheers
This Works so far. Gonna keep on trying & report back shortly. Will post another thread if it continues to be successful as this needs to be seen !
Just right.
This Works.
(sorry for my english again).
Great find hcorreo. This DOES work !
Been testing for a week now and i have had ZERO disconnections.
Thankyou so much mate
How exactly does this work?
Thats the work of 6 month looking for.
Thank you.
Screen won't stay off
I loaded the extension but now my backlight won't stay off. Is there a registry fix for this? Otherwise, it looks like a great BT extension.
Problem of the light:
I have the same problem with the version 1.31.178.1.
Try with the version 1.31.
Could this issue be fixed without having to buy a third party application?
Iam using my X1 with my builtin BT handfree in my Volvo and the problems just keeps coming.
The BT logo newer disappers like ive read about in other threads but the car and the phone seems to have massive communitcation trouble. Adressbook sync like it should but when i try to call from the car, it takes about 30sec until the phone reacts. Same goes for answering. When i press my answer button it takes about 30sec again for the phone to swallow that command. Sometimes it works, but then after 20sec the car reports that it lost its connection and if iam lucky, the connection is restored automaticly by the car.
The strange thing is that ive moved from my HTC Tytn to this phone, and the HTC never had any kind of trouble. I was running WM6 on the Tytn. Could it be WM6.1 that causes the trouble or is it the hardware in the phone?
Updated first post with info of versions and more info.
flashed to EnergyRom WM6.5 and disconnect is gone too
Used to disconnect randomly after 50-80second on my car's bluetooth
I have another problem, my bluetooth headset(SE HBH DS-205) disconnecting when i use WiFI
Jet Ware is good for the bluetooth desconexion.
Someone have a idea about how can i hang a call with the JetWare installed?
Thats the only thing to be perfect...