Database Develop

Someone help me please

I tried to update my rom and it was working, until my laptop turned off. (I forgot to plug in the power cord). So I tried it again, and it was stuck in bootloader and so I tried to update it using a Official Cingular Rom. But it gives me an error 260 saying cannot connect. I then tried to use mtty (one of the guides on here) but there's no USB option. I tried this on 3 different computers. Any suggestions please?!

To access mtty with USB option, you need to kill the wcescomm process (or disable USB connection in ActiveSync).

Thanks for the reply but I did kill it and disable usb connections. Stll no USB shows up. Im using a pretty new laptop with XP

Are you sure your Wizard is in bootloader mode when you start mtty?

It's always in bootloader mode when it's on since the Rom Update Failed ( computer turned off).
I really don't know why I have this problem. It was working before, but then it failed, and now it wont connect

Try to flash it on another computer.
I suspect there are problems on the USB ports (And/Or software issues) of your computer...

In my first post I said I tried to flash it on 3 different computers ( I meant laptops.) I dont know why it wont work now though. It worked yesterday

If it helps before it gives me the 260 error it says my USB device is not recognizable.
Please, does anyone have anything?
Im getting realy worried and my warrantys expired

help me stuck on bootloader
what do i do when i downloaded mtty? im am stuck on the bootloader screen due to a 98percent error but right now i cant do anything but stay on the bootloader.
I downgraded so im back to
IPL 1.01
and SPL 2.25.
HELP me get out this screen please? I've tried almost everything i could search on this forum. thanks in advance. and thanks for the hard work on the great roms you guys have!

Is there any other way to revive my device? I've been trying for the past 2 days and it's still not working
TheTop- Flash a official rom to it

I have tried official Roms like the one from the htc website, should I just keep trying even if I get error 260?

dunno if it helps, but make sure that you're battery is charged at least 50%. It seems to be one of the requirements that are needed when you normally flash with the RUU after activesync hookup. I know that when I tried flashing below 50%, the program wouldn't work for me and boot out.
if it's below 50%, look for a friend to charge it and try again.

Attempted WM5 Rom upgrade and got stuck!!!

Hey Guys i would need some help here i downloaded the Helmi upgrade rom but didnt seem to work. i get the device connection error before it even starts
i downloaded the official rom that i found on this forum on this link
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
as u can c this is the one from the Imate website when i attempted to install it. it actually didnt give me a connection error and started to install but when the PDA rebooted i got that connection error back and now i am stuck at the bootloader screen with SERIAL written at the top and V. 2.06 at the bottom tried to soft and hard reset but nothing seems to happen i even disconnected the battery for 30 minutes but couldnt get it to boot
Anybody pleeeeeease heeeeeeeeeeelp!!!!!!!!!!
Thanx

Please give us more information.
What windows are you running? XP or Vista?
Do you have an error number?

I run windows Vista and the error number i get is 101 Connection error when i attempt to run BaUpgradeUT
on the PDA the only screen i fet is the bootloader screen with SERIAL and V.2.06

Ok, the problem in flashing our precious BA under vista is that you need to replace the usb driver with an old version so the updater will work correctly.
Search the forums for vista update or vista flash and you will get the answer and the driver you need.

thanks a lot i ll try it right now been waiting for this

OK i just searched for vista flash and found this post
http://forum.xda-developers.com/showthread.php?t=313001&highlight=vista+flash
tried it it worked done upgrading and now i have WM5 on my PDA2k
thanx alot u really saved my day
i am looking for imaginet arabizer for it now to fully enjoy the experience
And one more thing i have to thank Duanes who posted up the vista upgrading manual linked above Thank you

can not flash button rom

HI.. Im a newbie here, just got my g3 wizard ipl2.25 / spl2.25 couple weeks ago and seen what you can do with them. phone is sim and cid unlocked. i would like to flash to wm6 eventually all thought im running into problems. i followed all the guides to upgrade. tried on my vista 32 bit and win xp sp2. every time i run the button rom to downgrade, i get "romupdateutility mfc application not responding" on vista and "error 260 or 274" with the xp. ive tried it in bootloader mode, restarting pc and wizard, tried different driver for vista, and shut down AS and WMCD before attempting to flash. ive been at this thing for weeks. firewall and antivirus turned off on both pcs, phone is at 100% charge. once in bootloader i get usb at bottom of screen. so i know i have connectivity. run rom not in bootloader, identifies version, then goes to bootloader, then i get error. run again and it dont even identify wizard. happens with both pcs. any ideas please help. i have already read, read, read and still cant figure this out. any ideas are greatly appreciated.

First of all,as you say its SIM/CID unlocked already then why are you trying to downgrade with Button's Rom,its only needed to downgrade if its required to CID unlock.If you are sure its already CID unlocked than simply download any wm6 rom and flash to upgrade,but if you are not sure if its CID unlocked,download WST_4.2.2 tool and run it to verify the CID lock/unlock status.

sorry i made a typo. it is Locked both sim and cid. typed last night at 3:30 in the morning. i ran the wizard service tool and thats what it told me. sorry again

check firewall (even XP one) / anti-virus settings, avoid using front panel USB, avoid usb cables with electric components, try different RUUs, avoid Vista, try another XP computer

Take all the precautions mestrini has posted above and always try on a winXP machine,don't use vista for flashing.May be the Button's rom you downloaded is not a correct package,try to download it again or from a different download link,you can even downgrade with official AKU 1.xx rom if you can find and download.

thanks for all the idea. definately stop trying with vista. i already have tried downloading button rom from a different link, no electronics in usb cable, and firewall and anit-virus have been disabled. i just found a aku 1.xx rom last night so im going to try that tonight. thanks again

well i tried all that and still nothing always get a error 274 connection code. my xp is ran through virtualbox on a ubuntu machine. could that have anything to do with it? i can run WST that works fine. one thing i have noticed though is when my wizard goes into bootloader my connection gets lost and usb connection icon comes up with unknown device and a different pid # then if phone is just turned on, and no check next to it. i tried activating it while ruu is searching and that immediately gives me a 274 error. is it normal for product id to change when in bootloader? by the way i was using the cingular 1.08 ship rom this time, tried it about 15 5itmes with same result everythime. never touched the phone and never took out of bootloader.

litlldevill666 said:
... my xp is ran through virtualbox on a ubuntu machine. could that have anything to do with it? i can run WST that works fine. one thing i have noticed though is when my wizard goes into bootloader my connection gets lost and usb connection icon comes up with unknown device and a different pid # then if phone is just turned on, and no check next to it. i
Click to expand...
Click to collapse
I think you touched the wound!!
I guess RUU can't communicate properly through virtual box. Please try another XP machine before anything else (i think you can manage a friend with one since M$ is so spread - unfortunantely )
cheers

well thats what it was, i did a dual boot on my linux laptop with xp sp2. ran button rom and flashed first time. thank you both very much.

litlldevill666 said:
well that's what it was, i did a dual boot on my linux laptop with xp sp2. ran button rom and flashed first time. thank you both very much.
Click to expand...
Click to collapse
Thanx ! it was pleasure to help you,hope you upgrade it successfully,do let us know if there's any problem,we are always here to help,Thats what this excellent forum is all about !!!

[Q] HardSPL Problem!!!

Hi everyone,
i've got a problem... i have tried to flash hardspl (bootloader) on my x1 but it doesnt work.
i have tried it like i read in the forum in different threads but i cant enter bootloader and when i start hardspl on my pc and take step by step as the program says... after the progression bar came - my phone display goes black and the front panel starts to shine and after a time i get a connection error on the hardspl program...
can anybody pls help me????

did you take out your micro sd card out of your phone?
That was my problem...........

I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard

hard spl
hi
i had some problems !
here is the best info
try every thing and search and read what i understud was that some phones have different ways to get in to the right hardspl mode i all most gave up and then it workt
DONT GIVE UP I WAS ON IT FOR 2 WEEKS
THE WORST THING IS I DONT REMEMBER WHAT I DID SORRY !
HASSE

tilsid said:
I too have the same problem. I follow the instructions and HardSPL checks my x1. Then when I hit update (the rom). It gives me either error 202 or 246. Not sure why. Anyone?
EDIT: Problem persists with or without sdcard
Click to expand...
Click to collapse
Several time ago i got that error too, but i never give up. Try another hardspl for xperia, when u click it, it will auto generate to extract some file, just click romupdate utility and follow the same procedure.
If still got some error, try install it from a fresh computer with usb 2.0 installe and active synch.
You just got that error becouse there is some miss connection with another usb device.

UPDATE: it worked
So I did a hard reset on the phone (settings-> clear storage) and then tried again. Worked like a charm. Installing ROM right now!
Thanks everyone!

Moved to X1 Q&A as not Rom Dev

it still not work...
i have tried all you write me...
no it says first "no file found" and trys to update over usb and than it says again connection error...
what shall i do?

[Q] Flashing TD2 (Topaz) stays at 0% help please!!!

Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance

can some1 please help on this?

ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?

Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.

prabhat said:
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
Click to expand...
Click to collapse
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work

IcedXian said:
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
Click to expand...
Click to collapse
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.

prabhat said:
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
Click to expand...
Click to collapse
how do i check if it is locked?

IcedXian said:
how do i check if it is locked?
Click to expand...
Click to collapse
Try other network SIM and see if that is working?

prabhat said:
Try other network SIM and see if that is working?
Click to expand...
Click to collapse
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems

so how do i marked this thread as solved????

OK Good Cheers!!!
Now enjoy any ROM you want and have fun .
You can append the post title with "[SOLVED]".
Thanks.

IcedXian said:
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
Click to expand...
Click to collapse
Brother explain more, how you solved your problem... I am also facing problem my room update also stuck at 0%..... what do you mean by "get internet"? and why you need it? and on which you get it mobile or pc?.......