HI.. Im a newbie here, just got my g3 wizard ipl2.25 / spl2.25 couple weeks ago and seen what you can do with them. phone is sim and cid unlocked. i would like to flash to wm6 eventually all thought im running into problems. i followed all the guides to upgrade. tried on my vista 32 bit and win xp sp2. every time i run the button rom to downgrade, i get "romupdateutility mfc application not responding" on vista and "error 260 or 274" with the xp. ive tried it in bootloader mode, restarting pc and wizard, tried different driver for vista, and shut down AS and WMCD before attempting to flash. ive been at this thing for weeks. firewall and antivirus turned off on both pcs, phone is at 100% charge. once in bootloader i get usb at bottom of screen. so i know i have connectivity. run rom not in bootloader, identifies version, then goes to bootloader, then i get error. run again and it dont even identify wizard. happens with both pcs. any ideas please help. i have already read, read, read and still cant figure this out. any ideas are greatly appreciated.
First of all,as you say its SIM/CID unlocked already then why are you trying to downgrade with Button's Rom,its only needed to downgrade if its required to CID unlock.If you are sure its already CID unlocked than simply download any wm6 rom and flash to upgrade,but if you are not sure if its CID unlocked,download WST_4.2.2 tool and run it to verify the CID lock/unlock status.
sorry i made a typo. it is Locked both sim and cid. typed last night at 3:30 in the morning. i ran the wizard service tool and thats what it told me. sorry again
check firewall (even XP one) / anti-virus settings, avoid using front panel USB, avoid usb cables with electric components, try different RUUs, avoid Vista, try another XP computer
Take all the precautions mestrini has posted above and always try on a winXP machine,don't use vista for flashing.May be the Button's rom you downloaded is not a correct package,try to download it again or from a different download link,you can even downgrade with official AKU 1.xx rom if you can find and download.
thanks for all the idea. definately stop trying with vista. i already have tried downloading button rom from a different link, no electronics in usb cable, and firewall and anit-virus have been disabled. i just found a aku 1.xx rom last night so im going to try that tonight. thanks again
well i tried all that and still nothing always get a error 274 connection code. my xp is ran through virtualbox on a ubuntu machine. could that have anything to do with it? i can run WST that works fine. one thing i have noticed though is when my wizard goes into bootloader my connection gets lost and usb connection icon comes up with unknown device and a different pid # then if phone is just turned on, and no check next to it. i tried activating it while ruu is searching and that immediately gives me a 274 error. is it normal for product id to change when in bootloader? by the way i was using the cingular 1.08 ship rom this time, tried it about 15 5itmes with same result everythime. never touched the phone and never took out of bootloader.
litlldevill666 said:
... my xp is ran through virtualbox on a ubuntu machine. could that have anything to do with it? i can run WST that works fine. one thing i have noticed though is when my wizard goes into bootloader my connection gets lost and usb connection icon comes up with unknown device and a different pid # then if phone is just turned on, and no check next to it. i
Click to expand...
Click to collapse
I think you touched the wound!!
I guess RUU can't communicate properly through virtual box. Please try another XP machine before anything else (i think you can manage a friend with one since M$ is so spread - unfortunantely )
cheers
well thats what it was, i did a dual boot on my linux laptop with xp sp2. ran button rom and flashed first time. thank you both very much.
litlldevill666 said:
well that's what it was, i did a dual boot on my linux laptop with xp sp2. ran button rom and flashed first time. thank you both very much.
Click to expand...
Click to collapse
Thanx ! it was pleasure to help you,hope you upgrade it successfully,do let us know if there's any problem,we are always here to help,Thats what this excellent forum is all about !!!
Related
Hi Guys,
i consider myself relatively experienced at flashing HTC devices having been using and upgrading for a few years but i've run into an issue on my CID locked G4. i upgraded to WM6 without issue and i tried to revert back to my O2 rom, the flash failed and i'm now stuck at the splash screen. I've tried to flash the original ROM from boot loader but i get a 101 error unable to connect(can see it in device manager). as i'm using vista i did a search and found some instructions and driver files but i get the same result. the only thing i can think of now is to CID unlock but i'm not sure it will help (unless it allows me to do the SD card restore). any ideas guys?
IPL:2.21.001
SPL:2.21.001
GSM:02.25.11
OS:10.1.0.811
OK., what you need to do is use a PC with XP, because i have read that vista PC's can get you into a lot of trouble. When you are at an XP PC, follow the instructions in my previous post
( http://forum.xda-developers.com/showthread.php?t=313354 ).
When you flashed the original ROM, and you succeeded in doing so, think real hard if you still want to upgrade to a new ROM.
If you still want to do that, stick to a PC with XP installed (no vista!).
If you did reflash a good ROM into your HTC you'll be one step closer to upgrading your ROM.
Read this post thourougly :
http://forum.xda-developers.com/showthread.php?t=298613
as this will help you in case you didn't CID unlock your device.
(thanks vippie; this is the clearest walktrough i could find!)
If you are really sure you CID unlocked your device, you can flash your device to any ROM you think is useful to you.
If your device is really CID unlocked, you should be able to flash any ROM that is posted on this forum.
I know that it is that easy, because i have tried every WM6 ROM that is posted on this forum
good luck, and i hope in the end you will have the ROM that you want....
thanks. my device IS CID LOCKED and i've tried to flash it from 2 XP machines so it is looking like its a brick thanks anyway.
for sale wizard with pretty 3 colour screen - sold as seen!!!
One thing you can try is use another USB to mini USB cable, i have had one cable that didn't connect really well.
Sometimes it worked but if i moved my phone the connection went down.
I just thought of that because it was a while ago that this happened - I threw away the faulty cable and had no problems after that.
tried 3 different cables too
knownuser said:
tried 3 different cables too
Click to expand...
Click to collapse
How much do you want for it? I need a new screen and body shell!
jabreu203 said:
How much do you want for it? I need a new screen and body shell!
Click to expand...
Click to collapse
was actually kidding i'd like to fix it but i'm open to offers PM me.
ok .....HELP
i've paid for the CID unlock which went well i then tried to flash the O2 default rom failed error 101 (connection) i then tried wizard love failed error (300) in italian.
so stage 2 was to use the sd card recovery i ran the utility and then followed the instructions r2sd all etc..all seemed fine i restored the image to the wizard and rebooted it still won't go past the splash screen i've tried re-flashing and hard reset still no go....please guys any help???
If you have a memory card take it out. Right click on ActiveSync and go to connection settings. Uncheck allow usb connections then try to flash. With windows XP...
tried to flash on a win2K machine (4 pc's thats the only one thats not vista) still get error 101 on the original O2 rom and 300 on the wizard love rom.
still no joy anyone have any ideas???
http://www.t-mobile.hr/mdasw/RUU_Pro...R_WWE_Ship.zip fixed i'm on a tmobile rom i'll try downgrading again.
I tried to update my rom and it was working, until my laptop turned off. (I forgot to plug in the power cord). So I tried it again, and it was stuck in bootloader and so I tried to update it using a Official Cingular Rom. But it gives me an error 260 saying cannot connect. I then tried to use mtty (one of the guides on here) but there's no USB option. I tried this on 3 different computers. Any suggestions please?!
To access mtty with USB option, you need to kill the wcescomm process (or disable USB connection in ActiveSync).
Thanks for the reply but I did kill it and disable usb connections. Stll no USB shows up. Im using a pretty new laptop with XP
Are you sure your Wizard is in bootloader mode when you start mtty?
It's always in bootloader mode when it's on since the Rom Update Failed ( computer turned off).
I really don't know why I have this problem. It was working before, but then it failed, and now it wont connect
Try to flash it on another computer.
I suspect there are problems on the USB ports (And/Or software issues) of your computer...
In my first post I said I tried to flash it on 3 different computers ( I meant laptops.) I dont know why it wont work now though. It worked yesterday
If it helps before it gives me the 260 error it says my USB device is not recognizable.
Please, does anyone have anything?
Im getting realy worried and my warrantys expired
help me stuck on bootloader
what do i do when i downloaded mtty? im am stuck on the bootloader screen due to a 98percent error but right now i cant do anything but stay on the bootloader.
I downgraded so im back to
IPL 1.01
and SPL 2.25.
HELP me get out this screen please? I've tried almost everything i could search on this forum. thanks in advance. and thanks for the hard work on the great roms you guys have!
Is there any other way to revive my device? I've been trying for the past 2 days and it's still not working
TheTop- Flash a official rom to it
I have tried official Roms like the one from the htc website, should I just keep trying even if I get error 260?
dunno if it helps, but make sure that you're battery is charged at least 50%. It seems to be one of the requirements that are needed when you normally flash with the RUU after activesync hookup. I know that when I tried flashing below 50%, the program wouldn't work for me and boot out.
if it's below 50%, look for a friend to charge it and try again.
I was attempting to flash my ROM to wm6 crossbow, I used Lokiwiz 02b to CID unlock my G3 wizard. Then, I attemped to flash the rom using the RUU. The Shelltool .exe never finished flashing the rom (even after 1.5 hours), so I disconnected the USB and tried to re-sync Windows Mobile Device Center (using Vista 32) as per the directions, but it would not detect the phone. I then entered bootloader mode and tried to run the RUU that way, but vista crashed the program if no sync connection is found. So, I downloaded the latest t-mobile ROM, and flashed the phone through bootloader (curiously the flash seemed to work using t-mo's RUU) and it installed to 100%. However, the phone will not get past the white splash screen. This is what it displays:
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 2.26.10.2
I tried to un-rar the tmobile exe to a new folder and replaced the nk.nbf file with the file from the crossbow ROM. The t-mo RUU wouldnt read it properly and it crashed. Now the phone is sitting on my counter with it's battery pulled out for fear it mat discharge completely. Since i can get into bootloader mode with the "USB" display at the bottom, I know the device isn't bricked, but what can I do to get it up and running and hopefully flashed to wm6 crossbow? Thanks for any help!
snootch said:
I was attempting to flash my ROM to wm6 crossbow, I used Lokiwiz 02b to CID unlock my G3 wizard. Then, I attemped to flash the rom using the RUU. The Shelltool .exe never finished flashing the rom (even after 1.5 hours), so I disconnected the USB and tried to re-sync Windows Mobile Device Center (using Vista 32) as per the directions, but it would not detect the phone. I then entered bootloader mode and tried to run the RUU that way, but vista crashed the program if no sync connection is found. So, I downloaded the latest t-mobile ROM, and flashed the phone through bootloader (curiously the flash seemed to work using t-mo's RUU) and it installed to 100%. However, the phone will not get past the white splash screen. This is what it displays:
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 2.26.10.2
I tried to un-rar the tmobile exe to a new folder and replaced the nk.nbf file with the file from the crossbow ROM. The t-mo RUU wouldnt read it properly and it crashed. Now the phone is sitting on my counter with it's battery pulled out for fear it mat discharge completely. Since i can get into bootloader mode with the "USB" display at the bottom, I know the device isn't bricked, but what can I do to get it up and running and hopefully flashed to wm6 crossbow? Thanks for any help!
Click to expand...
Click to collapse
Well Friend I hate to say it but Using Vista is your problem... The drivers in WMDC are different from those of activesync and thus Vista cannot talk to your phone in bootloader.
Follow this thread here:
Updated!!(10/20/2007) UPGRADE YOUR PHONE WITH WINDOWS VISTA!!! PROVEN METHOD!
Once you complete the steps in that thread, flash the Official T-Mobile Rom. I will be online for the rest of the night so I will walk you through everything if you would like me to. My AIM, Yahoo, and MSN messenger addresses are all at the top of every one of my posts.
First off, let me thank you for your help, as well as the time you have put in the community helping people like me. I had updated the driver before, but I guess several attempted flashed had overwritten the driver. Just now, I followed the link you gave me, updated the drivers, and flashed the T-mobile 2.26 ROM. The problem still remains. The RUU goes to 100%, shows me the finish/exit screen, mu wizard restarts, but hangs at the white boot screen and does not go any further.
Anyone? Need to get this phone up quick, as I am starting a new job soon and need the capabilities. BTW, i'm going to put XP on this laptop in dual-boot and see if I can get the t-mobile ROM to load fully using XP.
snootch said:
Anyone? Need to get this phone up quick, as I am starting a new job soon and need the capabilities. BTW, i'm going to put XP on this laptop in dual-boot and see if I can get the t-mobile ROM to load fully using XP.
Click to expand...
Click to collapse
If you can manage that, you will be set. All you have to do is create a hard drive partition and install xp to that partition.(from what I know anyway)
OK, i'm gonna try that (my internet is dropping every 5-10 secs, so it'll take a little time) I do have one question though- Last time I used Loki's unlocker, I unlocked the SIM, then the CID unlocker. After the CID unlocker, it locked me out of the phone. The OS wouldnt load unless I provided an unlock code. Then i reflashed it, then the problems started. I think i didn't have it CID unlocked properly. Plus having my miniSD in the slot probably didnt help things either. I've read the directions several times, and I dont see what i'm doing wrong. Could you maybe shed some light on what i'm doing wrong? Thanks!
EDIT: Also, I forgot to mention that I tried to do a hard-reset (hold wireless manager + voive command buttons + soft reset) and when you press the send button, it tells me unable to format FAT volume or something like that. Upon reading around, it seems like i'm having the exact same problem as this poster: http://forum.xda-developers.com/showthread.php?t=338315
snootch said:
OK, i'm gonna try that (my internet is dropping every 5-10 secs, so it'll take a little time) I do have one question though- Last time I used Loki's unlocker, I unlocked the SIM, then the CID unlocker. After the CID unlocker, it locked me out of the phone. The OS wouldnt load unless I provided an unlock code. Then i reflashed it, then the problems started. I think i didn't have it CID unlocked properly. Plus having my miniSD in the slot probably didnt help things either. I've read the directions several times, and I dont see what i'm doing wrong. Could you maybe shed some light on what i'm doing wrong? Thanks!
EDIT: Also, I forgot to mention that I tried to do a hard-reset (hold wireless manager + voive command buttons + soft reset) and when you press the send button, it tells me unable to format FAT volume or something like that. Upon reading around, it seems like i'm having the exact same problem as this poster: http://forum.xda-developers.com/showthread.php?t=338315
Click to expand...
Click to collapse
Although,many have successfully flashed using vista,but I'll suggest in your condition flash through WinXP. Download the official carrier's Rom from it's website.
1. Disconnect your phone from the usb cable,shut down any firewall,disable any Anti virus,Reboot your PC.
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. On your PC Open windows Task Manager...>Tab Processes...>wescomm.exe...>End process
4. Power off the phone completely (Not stand-by,shut off completely),or you may take the battery out for few seconds
5. Make sure your phone is not Connected to the PC via USB cable and remove the dummy Sdcard or mini-Sd card
6. Get your phone into Bootloader mode (Multicolor screen) by pressing camera button + Power on button
7. Reconnect your phone to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Be sure that your battery is charged over 70%)
8. "USB"will appear on the bottom of the screen of the Bootloader (Multicolor screen)
9. Run the Upgrade again and it will work fine without any problems.
10.Never use Bluetooth sync for the Upgrade
While upgrading, the ActiveSync program will not go on, however the upgrade is running.Please be patient when you're flashing your device, even if 98%. It can wait a little bit, 5 ~ 7 minutes.
Don't cancell the flash or get the phone off the usb cable till it confirms "Congratulations" or stops with an Error!!!
Hope it'll recover back to it's default status,good luck
I'm going to assume I don't have to CID unlock it until I want to switch from the T-mobile 2.26 ROM? I am about to install XP dual-boot shortly. I'll post my results when it's done. Thank you.
snootch said:
I'm going to assume I don't have to CID unlock it until I want to switch from the T-mobile 2.26 ROM? I am about to install XP dual-boot shortly. I'll post my results when it's done. Thank you.
Click to expand...
Click to collapse
As long as you are going to keep T-Mobile 2.26 on your device or are restoring T-Mobile 2.26, you do not have to CID unlock but should you decide to change to another Rom, you will need to CID unlock.
Good luck on the dual boot. There is a detailed tutorial in my Signature if you would like to take a look at it. After I can restore my crashed laptop, I am going to take care of the dual boot also.(I have to do it again... )
I really want to put WM6 on my wizard, and customize it the way I want it. Do you have any favorite WM6 ROM? All day yesterday I spent trying to add a WinXP partition to my Vista laptop. Not fun. First, I shrank the only partition on the drive (where Vista is installed) using Disk management, the Diskpart.exe to create a new 2.5Gb partition to install XP on. I rebooted the labtop with a XP disk, and installed XP on the partition. After the laptop restarted the first time, it did not come back up (black screen, no CD activity), So I changed the boot options in BIOS to HDD, and the Vista partition responded with "Error loading operating system" on a black screen. So now, i've got a laptop with a corrupted Vista install, A partition with partially installed XP on it, a XP disk that just quits working, and my wizard is shot. Normally something I can deal with if I had my desktop, but unfortunately my entire house is packed up in storage, i'm living in a hotel, and the laptop and phone are all i've got. SO, against my better judgement, I went to the store and bought a Vista home basic upgrade DVD to fix my vista partition, and now i'm back on the net- and going to try anothe XP disk. Whew- what a pain in the ass.
snootch said:
I really want to put WM6 on my wizard, and customize it the way I want it. Do you have any favorite WM6 ROM? All day yesterday I spent trying to add a WinXP partition to my Vista laptop. Not fun. First, I shrank the only partition on the drive (where Vista is installed) using Disk management, the Diskpart.exe to create a new 2.5Gb partition to install XP on. I rebooted the labtop with a XP disk, and installed XP on the partition. After the laptop restarted the first time, it did not come back up (black screen, no CD activity), So I changed the boot options in BIOS to HDD, and the Vista partition responded with "Error loading operating system" on a black screen. So now, i've got a laptop with a corrupted Vista install, A partition with partially installed XP on it, a XP disk that just quits working, and my wizard is shot. Normally something I can deal with if I had my desktop, but unfortunately my entire house is packed up in storage, i'm living in a hotel, and the laptop and phone are all i've got. SO, against my better judgement, I went to the store and bought a Vista home basic upgrade DVD to fix my vista partition, and now i'm back on the net- and going to try anothe XP disk. Whew- what a pain in the ass.
Click to expand...
Click to collapse
It's better if you use 'PartitionMagic' software to create partition and install WinXp,as it has much advanced features as compared to built-in Disk Management.It also has the option to create a partition in the same one partition to install new OS.
I tried that first, too bad it doesnt work in Vista.
Woo Hoo!!! Success!!
Alright! I got it fixed! What I did:
1- Spent $42 on a CID unlocker from: http://www.imei-check.co.uk/m3000unlock.php
After i recieved the files from the via email (about 10 minutes) I ran their unlocker program with the file they emailed me. This CID unlocked the wizard.
2- I flashed button's ROM: http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
I had to flash it twice until it showed a IPL/SPL of 1.01
3- Followed this post: http://forum.xda-developers.com/showthread.php?t=276963&highlight=splash+screen+freezing
(make sure you use a blank SD card, as it will require you to format the card to make it useable again after your'e done)
4- Remove battery, and restart phone, BOOM! Button's ROM works fine!
5- Now upgrade to any ROM you like (WM6 etc.)
snootch said:
Alright! I got it fixed! What I did:
1- Spent $42 on a CID unlocker from: http://www.imei-check.co.uk/m3000unlock.php
After i recieved the files from the via email (about 10 minutes) I ran their unlocker program with the file they emailed me. This CID unlocked the wizard.
2- I flashed button's ROM: http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
I had to flash it twice until it showed a IPL/SPL of 1.05
3- Followed this post: http://forum.xda-developers.com/showthread.php?t=276963&highlight=splash+screen+freezing
(make sure you use a blank SD card, as it will require you to format the card to make it useable again after your'e done)
4- Remove battery, and restart phone, BOOM! Button's ROM works fine!
5- Now upgrade to any ROM you like (WM6 etc.)
Click to expand...
Click to collapse
Congrats ! that's the easy way.....
Yeah, I got tired of screwing with it, and I did it all in Vista!
I searched the faq - but couldn't find the answer. I had to use xp on my 8125 for flashing - but the 8925 / kaiser is new to me. Do I still have to use a xp machine to ruu from bootloader for a 6.1 rom?
Possibly
I know that you are looking for a difinitive answer but I have an 8525, My Kaiser just arrived @ the house so I will begin modding it tonight but I haven't had any problems bootloading the 8525 in vista, alot of the threads say that ppl have but it worked eventually. it just takes me a hole lot of time to get a new phone to connect for the first time, after that it's business as usual
I flash and do all sorts of fun stuff using Vista. Just think "Mobile Device Center Connection" instead of "ActiveSync Connection" and you'll be fine.
The absolute best thing you can do is to search for "Flashing with Vista" using the search at the top of the screen. There you will find posts from the Hermes Section that are still relevant. You will rool back the drivers to the Activesync USB drivers & this is good for many reasons. 1. Flashing 2. Using Mtty if something goes wrong.
met3ora said:
I flash and do all sorts of fun stuff using Vista. Just think "Mobile Device Center Connection" instead of "ActiveSync Connection" and you'll be fine.
Click to expand...
Click to collapse
I follow this rule n everythings ran 100% smooth not a single problem!
Gotcha all - but, when i tried to run ruu from the 6.1 rom, nothing happend when I was in bootloader? Is there a special custom rom for the 8925? I had to use a custom one for my old 8125
Ug - XP did it... i tried oli's sim unlocker but couldn't get the whole job done in vista for some reason.... but I didn't uncheck advanced connections first!
new tilt
Ok I got home around 10 & have been trying to get this thing to work for like an hour & a half now, no luck, when I try to hard spl & it goes to bootloader it stays there for a minute then gives me an error
I think it might have something to do with the newer 1.93 spl - I did eventually get it to work with xp, but vista kept hanging and I did resets on the device even though the instructions in the roms said not to.... man, that's nerve wracking! I think the older 1.92 spl version ones work with the ruu better??
I am trying to flash the ROM on my Touch Pro 2 before I sell it. I am running windows XP on a mac using Parallels 5.0. I have tried running the ROM update when active sync is connected and all starts ok then I get error 226 saying cannot connect. I then tried flashing straight from a newly FAT32 formatted microSD card and that jsut stocks on with a Loading message. So I tried flashing Hardspl, although I think that I have done this before when I still had a pc, but that failed with a connection error too. Any tips/advice anyone?
You need to provide more information. Are you trying to flash a custom ROM, and which one? What ROM are you running now? What version of the phone do you have/what carrier?
If you are still HardSPLed, the second line of text on the bootloader (tri-color) screen will say "OliNex", probably saying "SPL-0.85.Olinex". If it doesn't say this, the SPL is locked, and you won't be able to flash a custom ROM.
If you are trying to flash the stock ROM, I think some people have been having trouble doing so with the phone HardSPLed. But it may depend on what stock ROM. I am able to flash the Euro stock ROM just fine on my HardSPLed phone.
ok, i'll try to answer your request for more info:
trying to flash Energy Rom build 23699.
Existing ROM version is listed as 2.07.401.1 (80303) WME dated 2/4/10.
Phone is an unbadged HTC Touch Pro 2 as sold by Tmobile etc in UK.
Can't see any mention of OliNex on bootloader screen, so perhaps I didn't unlock= it after all. Certainly no T mobile stuff left on the phone now.
??
jbevan said:
ok, i'll try to answer your request for more info:
trying to flash Energy Rom build 23699.
Existing ROM version is listed as 2.07.401.1 (80303) WME dated 2/4/10.
Phone is an unbadged HTC Touch Pro 2 as sold by Tmobile etc in UK.
Can't see any mention of OliNex on bootloader screen, so perhaps I didn't unlock= it after all. Certainly no T mobile stuff left on the phone now.
??
Click to expand...
Click to collapse
Don't know off hand what ROM that you have installed right now. What do the boot screens look like when you start the phone? Also, what does the bottom row of red letters say, when you startup the phone?
If it doesn't say Olinex on the bootloader screen, you are not HardSPLed. Either you never did it, or you relocked it.
Run HardSPL, and you should be able to flash from the SD card no problem.
Redpoint. Thanks for your replies and interest. I have tried to run HardSpl but this fails with a 260 connection error, even though Activsync is synced and connected. Id this to do with running a virtual pc on a mac perhaps?
Your welcome, hope my advice is helpful.
HardSPL is pretty finicky, even on Windows Vista and Windows 7 systems. I think running it on a Mac is difficult or even impossible. You can search the HardSPL thread and see if anyone was able to get it to run on Mac. I'm pretty sure I read different users on that thread mentioning issues with running HardSPL on Mac.
My best advice would be to run HardSPL on a friend's Windows XP system, if possible. It usually runs smoothly on XP, and only takes a couple minutes.
Yes, that confirms my suspicions. I will try it frommy partners windows XP netbook whenshe gets home. Fingers crossed.
Will let you know how I get on and if I need any more help!