having trouble getting my Pioneer AVIC D3 to connect with the bluetooth on my Tilt; the bluetooth audio works just fine, but i cannot make or recieve calls on the Navi system and its pissing me off. i already made sure the device is visible and bluetooth sharing is turned on (idk if i need it on but trying this anyways)
anyone else have a similar problem or a suggestion?
ugh, i want an AVIC so bad. but my truck is only 1.5 din. wold require a custom install
My silly thoughts:
1. Your Tilt doesn't need to be discoverable, you AVIC does.
2. If the AVIC doesn't show under settings-connections-bluetooth, then you haven't created a proper partnership.
3. If it does show there, then you should tap & hold that entry and see if you get "Set Headset" or "Set Handsfree". If you don't then the device isn't reporting a BT profile for phone use to the Tilt.
If you go through all of that and it doesn't work, I'd check with Pioneer for software/firmware upgrades for the AVIC. It may be an issue that they've fixed with updated code.
bump, tried the above with no luck. my sony S710a works fine and this is REALLY pissing me off; i spent almost $500 on the phone and another 1,000 on the damn navi system, if this doesnt work out soon im selling the Tilt and going back to the Sony
It is more of a problem with the pioneer unit rather then the phone. I have the tilt (flashed to htc) and have a problem of auto pairing. Everytime I get in the car I have to turn bluetooth off/on to get the deck (9800bt) to see the phone. This is something pioneer knows about a realesd a patch for the avic z2 (is that right) to fix the problem.
check this place out for more info (sorry don't have a direct link)
http://www.avic411.com/
blackcracker said:
It is more of a problem with the pioneer unit rather then the phone. I have the tilt (flashed to htc) and have a problem of auto pairing. Everytime I get in the car I have to turn bluetooth off/on to get the deck (9800bt) to see the phone. This is something pioneer knows about a realesd a patch for the avic z2 (is that right) to fix the problem.
check this place out for more info (sorry don't have a direct link)
http://www.avic411.com/
Click to expand...
Click to collapse
thanks im a member at avic411 as well as here and have had no success thus far; looks like SIM swapping with my Sony S710a is the best i can do. too bad because skipping songs or going thru my playlists via bluetooth is freakin sweet.
yah, i have the avic-d3 and the att/tilt, im so almost about to take the phone back. Even my crappy iphone paired withno issue. Please post if you figure it out.
Sad to see there has been no progress. I just got my new Kaiser, and I can only use it for bluetooth music and not as hands free with Avic D3. What a piss offf!!!!!!!!!!
I believe its a conflict with WM. I have the Pioneer 6800DVD and bt adapter and the same issue with my Treo 750 and Tilt.
I was able to get it to work on my treo using a bt program called jetware. I haven't tried it on my tilt yet. but it might work
I can confirm that the Jetware patch works great with my Tilt! You MUST uncheck bluetooth stereo (on your tilt) and only use the handsfree feature.
Related
Hi all, I have had this bug in varying flavours with both the Wizard and now the Kaiser.
If I make a call via Bluetooth (certain devices only e.g. JVC in car stereo), after the call, all audio is lost on the device when using the speaker, e.g. no ringtones, no TomTom voice guidance. (Oddly the touchtone sounds on the phone dialler continue to work.)
Making another call via Bluetooth works fine and all audio is heard, but not if calling via the earpiece of the phone - all phone audio is still muted. A reboot is required. (Even after a reboot, sometimes all audio is muted, and 2 or 3 reboots are required.)
It is like Bluetooth is 'stealing' the audio from the phone's speaker (which is should), but not giving it back at the end, however turning off Bluetooth doesn't return it.
It happens with WM6.x on the TyTN II.
If you can fix it either via a workaround (reboot the audio service after every call?) or a direct fix (HTC are useless and have not emailed me back), I will pledge you $100 via PayPal. I am sure others will join me in pledging an amount also.
Yes. I've seen the same thing with the last stock Tilt ROM, too.
Same here. But is not happening very often.
The other issue for me is if I have A2DP enable and listening to music, then making a phone call will drop the A2DP connection and I have to reconnect A2DP again. It happens to both my JVC car unit and Sony HBH DS220.
I tried that w/ Dutty's WM6.0 and the latest 6.1 rom
I have the same issue, with bluetooth disconnects.
Just staying on-topic here (you can solve A2DP issues with A2DPToggle a great free app), has anyone found a solution to this Bluetooth loss of speaker audio issue, or a workaround to avoid it happening?
Rebooting the phone after every Bluetooth phone call is hardly what I consider a high-end smartphone to require.
Same here
What Radio's are you guys running? (Ignore my signature for the moment, been phoneless and away from here for a while and just getting back up to date )
Haz
My current radio is 1.64.08.21.
I have also tried 1.64.06.04.
Could we be closer to finding the problem? Does the Radio contain the Bluetooth stack?
Here are all available Radios:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
I'm going to try 1.58.26.20 now. I suggest others try the other 1.5x variants and report back if any of them solve the bug.
Update: I am now offering $100 to anyone who can fix this - see 1st thread.
I have used Windows Mobile since the first ever SPV phone. This one issue is making me look seriously at abandoning that loyalty and getting a Blackberry. If I can fix this for $100 I could be tempted to stay however.
Have you tried BT Audio Toggle ? (found at http://pdaphonehome.com/forums/sams...luetooth-headset.html?perpage=20&pagenumber=1)
Maybe if this helps with your problem then a mortscript could be written to automatically run the utility after a phone call.
What bluetooth headset do you have? Have you tried other headsets or just the one you have? What version of 6.1 are you using?
Thanks, I'll give the audio toggle a go. Might need some help with Mortscript though
I am using the JVC KD-BT1 car stereo with Bluetooth in-car kit. However I can also lose audio on a clean boot even when not in the car, although that is very rare. When using it with the car stereo, it happens after almost every call.
I am running Sleuth's WM6.1 but the other people in this thread are using a variety of BT devices, ROMs, and HTC models.
Can anyone help with how to create a MortScript to run BTAudioOff.exe after each phone call?
Flash a NIKI radio. I had a similar issue with my JVC in-dash CD player and I just got all the radios and tried them all. All the NIKI radios seem to work a lot of the time, while some work and others don't.
Kraize92 said:
Flash a NIKI radio. I had a similar issue with my JVC in-dash CD player and I just got all the radios and tried them all. All the NIKI radios seem to work a lot of the time, while some work and others don't.
Click to expand...
Click to collapse
Thanks, I'll try that too.
Rumball said:
Have you tried BT Audio Toggle ? (found at http://pdaphonehome.com/forums/sams...luetooth-headset.html?perpage=20&pagenumber=1)
Maybe if this helps with your problem then a mortscript could be written to automatically run the utility after a phone call.
Click to expand...
Click to collapse
Okay I tried this and before I even got in the car, chose to turn Bluetooth Audio off using the toggle. Since then I cannot recreate the issue! I am not having to toggle after every call, I only did it once and the problem won't come back!
Fingers crossed...
NP. 1 more thing. What do you mean all audio is lost? Do you mean that the auido goes through the bt device? Or just that there is no audio coming from either at all. If that's the case, then all you might have to do is go to Comm Manager>Settings>Bluetooth>JVC (or whatever you named it) and uncheck the Stereo sound and viola it should work unless you are not using A2DP >.> . I think it's either directing all sound to your bt device or trying to send sound to it but failing.
Kraize92 said:
NP. 1 more thing. What do you mean all audio is lost? Do you mean that the auido goes through the bt device? Or just that there is no audio coming from either at all. If that's the case, then all you might have to do is go to Comm Manager>Settings>Bluetooth>JVC (or whatever you named it) and uncheck the Stereo sound and viola it should work unless you are not using A2DP >.> . I think it's either directing all sound to your bt device or trying to send sound to it but failing.
Click to expand...
Click to collapse
The issue is there is no audio coming from either the phone or the Bluetooth device. I hear the Bluetooth device disconnect, and its display shows that it has also.
I see no 'Stereo' option to untick for the JVC in its Bluetooth settings, only Hands-free and Wireless Stereo (already unticked).
No progress
Okay, this is seriously getting me down now It all sounded so promising. I have tried the following:
Flashed Niki Radio 1.58.21.23
Tried using Bluetooth Toggle - it seemed to work once when I turned BT off before connecting, but after a reboot the problem is back
Tried a HFP extension PM'd to me (thanks anyway - didn't help)
Made sure Bluetooth Stereo is unticked in the JVC's settings on the phone
I am not sure if the problem is worse when taking a call as TomTom is running.
Here is an interesting development which might help someone narrow down the cause:
I make a few calls, and as always audio is lost, even for phone calls sometimes.
Touchtones on the keypad are the only sound that the phone continues to emit itself. Everything else (TomTom, ringtones, etc.) is dead.
I then go into the JVC's A2DP mode and 'Connect'. The icon appears on the mobile's title bar, and I can hear phone audio through the car stereo.
I 'Disconnect' and the phone's audio is still lost.
What this tells us is that the phone is putting out sound, just not through the speaker.
If someone can write something that will reset the speaker driver after a call, my offer for $100 still stands.
Just to update this, the issue still exists with a clean install of HTC's new 2-May-08 WM6.1 ROM from their website. To***rs!
CJSnet,
Since we got the similar setup w/ exact the same issue (Att Tilt w/ JVC BT-1), I think the problem is basically Kaiser does not switch back to A2DP profile properly after headset profile from phone call. The same issue happens to my Sony HBH DS-220 stereo headset too.
I tried my Eten M600 w/ JVC BT-1 and does not see this problem
I have experienced few irritating problems with my Diamond when used in my Seat Leon 2008's stock head unit via bluetooth:
1. Phonebook is displayed always and I can call phones from there which is OK, however "Incoming Calls", "Outgoing Calls" and "Missed Calls" are not working always: sometimes I have those lists filled with the corresponding entries, sometimes all three lists are empty.
2. When I am running iGO8, the bluetooth connection gets connected and disconnected each 5 minutes or so.
3. The headset volume is really low. I didn't have that problem with my Sony Ericsson phones before.
Does anyone have any of those problems and know a solution for them?
Only thing i can say. Stock seat bluetooth is terrible. My brother has orderd a new seat and the dealer advised to choose for the pioneer mounted radio because of the known problems with the seat unit and the bluetooth functions of it.
try posting in the Accesories section, u might get more help.
marco899 said:
Only thing i can say. Stock seat bluetooth is terrible. My brother has orderd a new seat and the dealer advised to choose for the pioneer mounted radio because of the known problems with the seat unit and the bluetooth functions of it.
Click to expand...
Click to collapse
Pioneer isn't that good either, I had the Pioneer radio with Bluetooth and I couldn't get it running with my previous phone Trinity P3600 and with my Diamond it didn't work either.
Willem
I have used the stock head unit previously with simple mobile phones and it has always worked perfectly and I was very happy with the bluetooth implementation in Seat. So, I think the problem is not in the head unit (i.e. an accessory problem) but lies somewhere in the "phonebook through bluetooth" implementation in the Diamond.
Hello,
I have the same problem. I have a Skoda Octavia II (2007) with built-in bluetooth and a Diamond (ROM 2.03).
I use the iGO8, and it works fine, but the bluetooth connects and disconnects randomly in all ~5 minutes. When I shut down the iGO8 or when it runs on the background, the bluetooth works perfectly, when it runs in the foreground, the bluetooth disconnects again...
Who knows wat is this problem? Should I try a new ROM? A new radio version? A new iGO version?
CyberGene: Have you a solution for this problem? Or you use a different iGO8 or a different navi software?
Thanks,
DuckHead_
Unfortunately I didn't find any solution to the problem. To be honest, I am currently using a SonyEricsson phone and the Diamond is used by my girlfriend. We are still using iGo from within the Diamond but with no Bluetooth activated.
Thank you for the quick answer.
Why don't you just take your car into a car audio place and get them to check it out for you
I thought it so that the problem with Diamond. The BT does not work only if running the iGO...
I just recently bought a new stereo bluetooth headset (dell BH200) which sounds great when I play music through it, but it comes with a gigantic flaw. I can't make or recieve calls. The moment any of that happens, the headset disconnects itself. I'm wondering what the problem is since the headset does support 2.0 with EDR and so does the fuze. One thing I did noticed though was that when I paired the headset, it did not ask for a passkey at all and just went straight to "save".
I'm wondering if there is anything that I can do to make the headset work with phone if anyone has any idea. I was lurking around and someone mentioned something about CoD (class of device) but I dont think that's the issue.
Thankyou for your time reading this post.
mputtr said:
I just recently bought a new stereo bluetooth headset (dell BH200) which sounds great when I play music through it, but it comes with a gigantic flaw. I can't make or recieve calls. The moment any of that happens, the headset disconnects itself. I'm wondering what the problem is since the headset does support 2.0 with EDR and so does the fuze. One thing I did noticed though was that when I paired the headset, it did not ask for a passkey at all and just went straight to "save".
I'm wondering if there is anything that I can do to make the headset work with phone if anyone has any idea. I was lurking around and someone mentioned something about CoD (class of device) but I dont think that's the issue.
Thankyou for your time reading this post.
Click to expand...
Click to collapse
mmm me thinks that it may not have paired correctly. I don't actually know much about the model you have. I have a Iclip R32 which I have had paired with most of my phones. It always asks for the passkey. I have always, once paired, made a call to my phone while the headset is connected. Not sure if it is related to my device or not but if I do not do this it will do weird things when I listen to music and receive calls. Sorry if this has not been of much help to you.
Bottom line: I would delete the pairing and do it again.
if you're not sure which bt headset it is, it's up on the dell website. Let me snag a link for you real quick. The problem is it only does half the function i want it to which is aggravating.
Here you go:
http://accessories.us.dell.com/sna/...etail.aspx?c=us&l=en&s=dhs&cs=19&sku=313-6220
that's the headset I got. The thing that strikes me as odd is that I couldn't enter a passkey nor is there an option for me to force to provide a passkey like vista. I heard rumors about the bluetooth stack automatically assuming passkeys for "unsafe" devices like headsets and all that. If anything should I consider getting a different bt stack? People were recomending Widdcomm's...
mputtr said:
if you're not sure which bt headset it is, it's up on the dell website. Let me snag a link for you real quick. The problem is it only does half the function i want it to which is aggravating.
Here you go:
http://accessories.us.dell.com/sna/...etail.aspx?c=us&l=en&s=dhs&cs=19&sku=313-6220
that's the headset I got. The thing that strikes me as odd is that I couldn't enter a passkey nor is there an option for me to force to provide a passkey like vista. I heard rumors about the bluetooth stack automatically assuming passkeys for "unsafe" devices like headsets and all that. If anything should I consider getting a different bt stack? People were recomending Widdcomm's...
Click to expand...
Click to collapse
Mm I checked them with the link you sent thanks for that.
Maybe my headset is getting old but it always asks for a passkey when I connect it. My Touch Pro did just like my Kaiser and Hermes. Sorry but maybe you will need to check with Dell. They do not mention any thing but I'm assuming that they have a microphone for phone calls....
edit: Doh I just read the 2nd page of reviews and it does have a mic. Sorry should of checked that before.
Well since your touch pro most probably runs wm6.1, i doubt it's because your headset is old. I wonder if there's a way to disable this automatic passkey guessing thing.
Anyone? any ideas on how to disable the automatic pin number guessing feature of wm6.1?
Kicks post up to page 1
So what do you guys think?
Would it be a good idea to use a different bt stack or am I stuck with no choice at all?
Need Help Badly!!
hi i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
i really need help....... pls, someone that have the same proble with their HTC Touch Pro bluetooth connection.....
is there a way to disable the automatic passkey mode that came with the MS bt stack or anything like changing my stack to a different' company's
hmm just want to ask.. have someone tried to pair Philip SHB7100 with HTC Raphael yet?? because i would like to buy this bluetooth, since my samsung WEP200 is not compatible...
thank you
excelex said:
hmm just want to ask.. have someone tried to pair Philip SHB7100 with HTC Raphael yet?? because i would like to buy this bluetooth, since my samsung WEP200 is not compatible...
thank you
Click to expand...
Click to collapse
Read here: http://hongkongphooey.wordpress.com/2007/10/23/unboxing-philips-shb7100-bluetooth-stereo-headset/
Hi all,
Need help with my HTC Diamond. As my Pioneer car navigation, with which the diamond bluetooth functioned well, was stolen, I was advised to mount a JVC navigation system NX7000 with a detachable front in order to prevent theft. However, the HTC bluetooth dysfunctions. It connects and pairs without problems, but when the diamond goes into sleep or is switched off, it is impossible to establish a phonecall using the JVC car-unit, although it indicates that blueconnection is still valid. When I switch on the phone, even minutes later, it will eventually do the call. If I force the HTC to remain powered-on it will function normally. I am sure that this has something to do with a suspend-mode of the diamond bluetooth part and that this can be solved by the right registry tweak. I tried several tweaks that I found on the forum already but without succes. I upgraded the HTC to the latest firmware 2.03 but no improvement.
I called with HTC and they said that they know the correct registrysettings but they won't supply them because of "licence restrictions"...........
Anybody the same problem? Somebody who has the solution?
Thanks
I have exactly the same problem! Incoming calls work fine, but like you, I cannot initiate outgoing calls from the JVC unit unless the diamond is turned on fully. I there's not a fix for this, I may have to go out and buy an iphone again after selling mine to get a diamond!
there is a fix but HTC won't tell. they suggested to open a thread on this forum in order to get suggestions on the matter. and so I did. When I subsequently asked them if they would post this solution on this forum they said they would not :-(
Bluetooth problems across the board with JVC NX7000
drpellypo said:
I have exactly the same problem! Incoming calls work fine, but like you, I cannot initiate outgoing calls from the JVC unit unless the diamond is turned on fully. I there's not a fix for this, I may have to go out and buy an iphone again after selling mine to get a diamond!
Click to expand...
Click to collapse
You may not want to fall back on an iPhone with the JVC NX7000. Not to go too far off-topic here, but pairing an single iPhone works great (once I figured out the overly complicated menus). BUT...it won't let me pair a second phone (of any kind). Once the first phone is paired, all pairing menu options are greyed out ("Search" and "Open"), thereby preventing any further phones from being paired. I first need to unpair the first phone before I can pair the second one. JVC Support is comically unhelpful.
Has anyone had luck paring more than 1 phone (of any brand) with the JVC NX7000?
You are the lucky one! You can succesfully pair one phone but it works
I don't care if I can only pair one phone. I only have one phone! lol.
Hey guys!
kind of the same problem here but with the Volvo built-in bluetooth solution. Actually when the device sleeps and I initiate a call it will take some time, then the device will turn on and it will begin to dial but drops immediately. When the device is fully turned on there is no problem at all. Incoming calls work just fine. Even though it first rings on the phone and after a second or two it will ring in the car and the device will stop ringing. Which confirms that bluetooth sleeps somehow and only connects fully when the device is fully awake.
It really looks like bluetooth goes to sleep, so we need a solution which keeps bluetooth awake even if the device itself is in sleep mode.
Patrick
Exactly the problem I described. It's a sleep or suspend mode of the bluetooth that causes the dysfunction. I can pair nokias wih JVC without any functional problem, they work like a charm. It is really a HTC related problem, I tried a lot of registry tweaks suggested for similar problems in other HTC devices, but no luck so far.
Reply to Guitartng:
storing multiple bluetoothdevices in the JVC for subsequent use can be done by selecting "new device" and then go to "bluetooth setup".
Exact same issue with a Kenwood DNX 8120 double din unit.
If anyone finds out the solution, please post it here. I'll keep searching.
Good News Lads!
Well after blowing my head of trying different roms and radios got a solution.
The solution comes from JVC stereo and not from Htc diamond Phone!
You have to set special phones To Samsung E520 and then pair device with the htc diamond. It works like a charm, know I can make calls through my JVC stereo and NO MORE deep sleep of htc diamond.
Try with samsung, it work for me, if not try with other phones in special phones before pairing!
Cheers!
I just wanted to let you know that I also was able to fix my bluetooth issue by flashing stock firmware 2.03.405.3 WWE with Radio 1.09.25.23. I was previously using Dutty's V4 which is based on 2.03 afaik, but it look like Dutty tweaked something on the bluetooth stby behaviour.
Anyway, it works like a charm now and the whole calling and answering process is also much faster!
For some reason when my phone connects to a headset that supports both audio and phone the audio will not auto connect. I have to open the bluetooth options and hold down on the device i want to connect to then check the audio box.
sounds similar to the problem I'm having... I connect my phone via bluetooth to my car (Ford Sync) and I need to turn bluetooth off then on at least once (if not twice) for the car to recognize the phone.
I am getting so fustrated with this phone... Its been replaced twice (like replacing hardware is going to fix a software bug).
i really want to stay with an Android phone... maybe the Samsung Moment? it appears as if 2.x is now available (unofficially?) since Samsung released the Kernel source like they were supposed to.
TL
It worked before fresh 1.1 so maybe it was just a change in something.
I'm using the stock software and I have the problem so it is not freshrom
man we need an update HTC!!!!!!!
q1 almost over so we're that much closer to getting our official 2.1 update.
I've also got a bluetooth problem - would really appreciate any help you can offer.
I have a Tomtom and headphoned in my Bike Crash Helmet. I want to connect so I can hear music and phone calls through the phone in my helmet and also hear the TomTom.
The Tomtom connects to the Helmet, the phone connects to the Tomtom and I can get calls through the speakers via the Tomtom but music won't play (apart from an annoying second or two after dropping a call).
If I can get the phone to advertise headset features I could connect the Tomtom to the phone and the phone to the speakers (think that would work), otherwise I believe the Tomtom is not advertising media audio, only phone audio and don't expect I can change that.
Any thoughts...?
PS - Have tried the market headset app - unfortunately it doesn't fix the problem...
Time_Lord said:
sounds similar to the problem I'm having... I connect my phone via bluetooth to my car (Ford Sync) and I need to turn bluetooth off then on at least once (if not twice) for the car to recognize the phone.
I am getting so fustrated with this phone... Its been replaced twice (like replacing hardware is going to fix a software bug).
i really want to stay with an Android phone... maybe the Samsung Moment? it appears as if 2.x is now available (unofficially?) since Samsung released the Kernel source like they were supposed to.
TL
Click to expand...
Click to collapse
well now the source for the CDMA hero is out so shouldnt be long till a lot of the little bugs arre resolved.