Related
Hs anyone here successfully synced their WM6 himalaya with Windows Vista over bluetooth?
I am trying to sync my device with Windows Mobile Device Center 6.1 in Vista over bluetooth but whenever i try to click on "Connect Via Bluetooth" in ActiveSync found in my device i get following error on my device:
"Cannot communicate with the PC because of the following Remote Networking error (Error 608)
Please reconnect your device if problem persists, restart the device."
I have tried both the roms i.e. helmi_c & c_shehkar's rom but couldnt get to sync my device over bluetooth with Vista. Previously i had a WM5 rom on my device and it synced with Vista flawlessly over bluetooth.
Can anyone help me on this matter???
In the file After_You_Flash.txt you can read:
"Once the device comes to life after hard reset for the first time, goto Settings-->Connections-->USB to PC and check the advance network functionality.
If you dont do this the device shall refuse get conncted to PC via USB."
EelcoV said:
In the file After_You_Flash.txt you can read:
"Once the device comes to life after hard reset for the first time, goto Settings-->Connections-->USB to PC and check the advance network functionality.
If you dont do this the device shall refuse get conncted to PC via USB."
Click to expand...
Click to collapse
i did what was written in that file but the problem is im syncing it thru bluetooth not USB so tht didnt solve my problem.
can you syncing WM6 via BT with WINXP?
It's not working with me too on XP
Well, it was never working for me - on any OS - WindowsMobile wasn't detecting ActiveSync service on my PC via BT
utak3r said:
it was never working for me - on any OS - WindowsMobile wasn't detecting ActiveSync service on my PC via BT
Click to expand...
Click to collapse
Himalaya WM 5.0 was syncing just fine via BT ActiveSync.
WM 6.0 is not (yet).
Sascha
I cant even sync it using my USB cradle eventhough i have tried what was written in after_you_flash.txt. I am using Vista and is WMDC 6.1 is installed on Vista which is supposed to work with WM6. The problem is when i connect it thru USB, Vista fails to install a proper driver for it.
taim99 said:
I cant even sync it using my USB cradle eventhough i have tried what was written in after_you_flash.txt. I am using Vista and is WMDC 6.1 is installed on Vista which is supposed to work with WM6. The problem is when i connect it thru USB, Vista fails to install a proper driver for it.
Click to expand...
Click to collapse
Oh man... my advice is.... get Vista away from your PC
Seriously, I can't help, there're so many problems with so many apps on Vista...
utak3r said:
Oh man... my advice is.... get Vista away from your PC
Seriously, I can't help, there're so many problems with so many apps on Vista...
Click to expand...
Click to collapse
utak3r the problem is that i cant do that since i am a WPF developer and need Vista for it. I kno WPF applications are possible on XP too but we as developers look forward to next-gen technologies.
All i wish is that our masters here somehow get this thing to work over bluetooth.. I wish them best of luck!!
hi
which bluetooth software you using ?
taim99 said:
I cant even sync it using my USB cradle eventhough i have tried what was written in after_you_flash.txt. I am using Vista and is WMDC 6.1 is installed on Vista which is supposed to work with WM6. The problem is when i connect it thru USB, Vista fails to install a proper driver for it.
Click to expand...
Click to collapse
There Might be a solution..Only if u have XP installed on 1 of the partition..u can search the drivers in that partition
i can sync just fine with bt over vista using wm6...just had to make a new outgoing serial port on the ppc.
Using microsoft stack on both devices.
Syncing BT with Vista and WMDC
Have a look at this link. Its for WM5 but I used it with WM6 successfully.
http://www.inspectmygadget.com/2007/05/31/how-to-connect-your-wm5-device-to-wmdc-via-bluetooth
Good luck
conecting ppc (wm6) to vista via BT solution
A few months ago, I posted on some forums this solution of my own, that enables conection vista pc and wm6 ppc via BT:
OW TO CONNECT WMDC AND PPC ON VISTA
1.-run bt on your pc
2.-run bt on your ppc
3.-bond your pc and ppc via bt, that will require password on both devices
4.-once connected, your pc will show some services your ppc is offering: activesync, voice gateway, obex, etc. and will allow you to configure some of them. you can see that because under each configurable service there is a button named configure. your pc assings by default one specific com port to activesync service, that may vary depending on free com ports available on your pc. you can see the assigned port clicking on configuration button. on the new window, you can see COM PORT, and one number. For our purposes, let´s suppose it is COM5
5.-run wmdc software, modify connections and mark on "allow bluetooth connection", which is not marked by default. close wmdc.
6.-old activesync program allows to choice com port to connect to. wmdc does not. it must be set modifing windows vista registry. so, run regedit and look for the key HKLM\software\microsoft\windows ce services\serial port. this key has usually the value "bluetooth" (without quotes). well, modify it, delete bluetooth and write COM5. (or any other com port your pc has assigned to activesync). notice that we are modifing SERIAL PORT, that means wmdc uses this service to connect.
7.-close regedit and reboot pc in order to allow changes in the registry.
8.-run again bt on both devices.
9.- run "add new bluetooth devices" on your pc. it will show again your ppc and services it provides, including activesync. configure again activesync service, and check out com port is still the same as before. in this configuration window, you will notice you can modify the NAME of the service, that is "activesync" (without quotes). well, change it, and write Serial Port.
10.-run again wmdc and it will connect to your ppc
what have we done?
1.-activesync ppc service is connected to pc using COM5
2.-wmdc is using serial port on COM5
3.-we change the name of activesync ppc service to serial port service
4.-both running on com5.
I'm trying to get my phone to connect to it...in any way...I used to be able to sync my phone (AT&T Tilt) via bluetooth, but now when I try, the phone gets user authorization, etc., (meaning IT can do what IT needs to), but WMDC does nothing.
Then, the sync fails, and the device says, "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer."
The problem...Windows Vista doesn't use ActiveSync of course...it uses the windows mobile device center.
When I try to connect via usb, then on the computer, a dealie pops up in the lower right for "safely removing hardware". It has HTC USB sync listed. My tilt tries to connect via usb, but it fails, saying the same thing, "To synchronize this device, you must install ActiveSync...blah blah blah."
I don't even know why this is happening like this...I normally don't sync too often (since I normally use my phone alone), but I was trying to get a new radio on my phone to help with another problem (see http://forum.xda-developers.com/showthread.php?t=365270&highlight=call+ended+00:00 )
but I can't even sync anything, so I can't use the tool to get the new radio on.
Subversive Asset 2.0 said:
I'm trying to get my phone to connect to it...in any way...I used to be able to sync my phone (AT&T Tilt) via bluetooth, but now when I try, the phone gets user authorization, etc., (meaning IT can do what IT needs to), but WMDC does nothing.
Then, the sync fails, and the device says, "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer."
The problem...Windows Vista doesn't use ActiveSync of course...it uses the windows mobile device center.
When I try to connect via usb, then on the computer, a dealie pops up in the lower right for "safely removing hardware". It has HTC USB sync listed. My tilt tries to connect via usb, but it fails, saying the same thing, "To synchronize this device, you must install ActiveSync...blah blah blah."
I don't even know why this is happening like this...I normally don't sync too often (since I normally use my phone alone), but I was trying to get a new radio on my phone to help with another problem (see http://forum.xda-developers.com/showthread.php?t=365270&highlight=call+ended+00:00 )
but I can't even sync anything, so I can't use the tool to get the new radio on.
Click to expand...
Click to collapse
Put your phone into tri color mode and you will be able to flash.
Power button + Camera button (hold them) press stylus into reset. HOld all 3. Tri-color screen will appear.
have you got the update to the drivers for WMDC, mine didnt work before I downloaded this update, oh and just remember, in windows, if it does work, RESTART fixes a lot of problems!
where would the update for the drivers for WMDC be?
Change the setting in USB to PC, in settings, connection tab. Try it with advanced functionality on.
I've tried it both ways. With advanced functionality ON, then the PC doesn't even recognize the device HTC USB Sync.
With advanced fuctionality OFF, then the pc recognizes HTC USB Sync, Windows Mobile Device Center recognizes nothing, and then activesync fails with the message, "To synchronize, get activesync 4.5 blah blah blah"
I used the device with an XP virtual machine I had, and XP + activesync has no problems seeing the device. However, MICROSOFT OUTLOOK in the XP virtual machine cannot see the device, so I can't correctly sync emails, contacts, tasks, or calendar icons. When I tried, the only thing that happened was that it deleted all of my calendar items (AGAIN!) and then said that "ActiveSync cannot synchronize Email, Calendar, Contacts, Tasks and Notes because Outlook is not installed on Windows PC 3. To synchronize, disconnect the device, install and run Outlook, and then reconnect the device and try again."
Outlook IS installed in the XP vmware (windows PC 3)...but it can't see the device for some reason.
I decided in the end that I could go without a new radio. I'll just find a way to fix my problem in a different way
Subversive Asset 2.0 said:
I've tried it both ways. With advanced functionality ON, then the PC doesn't even recognize the device HTC USB Sync.
With advanced fuctionality OFF, then the pc recognizes HTC USB Sync, Windows Mobile Device Center recognizes nothing, and then activesync fails with the message, "To synchronize, get activesync 4.5 blah blah blah"
Click to expand...
Click to collapse
With it "on", its not a USB connection. Whilst it uses the USB lead, it actually creates an RNDIS connection which uses IP to communicate. The device and pc should create a small private IP network. If your device can't even be seen by the Vista PC when advanced is on, then there is something blocking IP traffic, like an over zealous firewall. Try turning the firewall off temporarily. Also try disconnecting the pc from any other network and then plugging the device in.
I assume you have run windows update in Vista to ensure that you have the latest version of WMDC 6.1
With advanced "off", the device is using a traditional USB connection. Try deleting any existing partnerships and try a different USB port.
i have a similar problem however when mobile device center starts up it just gets the standard stopped running vista message and trys to restart unsuccessfully!
This may help you out with your problems however cant seem to resolve mine
http://modernnomads.info/wiki/index...+Device+Center+Troubleshooting#Beforeyoustart
unwired4 said:
With it "on", its not a USB connection. Whilst it uses the USB lead, it actually creates an RNDIS connection which uses IP to communicate. The device and pc should create a small private IP network. If your device can't even be seen by the Vista PC when advanced is on, then there is something blocking IP traffic, like an over zealous firewall. Try turning the firewall off temporarily. Also try disconnecting the pc from any other network and then plugging the device in.
I assume you have run windows update in Vista to ensure that you have the latest version of WMDC 6.1
With advanced "off", the device is using a traditional USB connection. Try deleting any existing partnerships and try a different USB port.
Click to expand...
Click to collapse
That's an interesting way of referring to it...the thing is...I currently do have my firewall off...would a router (dorm or home) block this? Because I have NEVER gotten advanced network fuctionality to ever work--when I was at home, my dad had a router set up and when I'm on campus, the dorm has a router on.
Even without it connected to any other network, it does not work. And I am using the latest WMDC 6.1 but still, it doesn't work.
The strange thing is...it works with ActiveSync in a Windows XP vmware machine (partially...it won't allow me to use outlook)...
Deleting existing partnerships deletes more stuff from my device deletes more stuff (my contacts and calendar are gone) -_-. Deleting existing partnerships on comp doesn't help..
JPHCCFC said:
i have a similar problem however when mobile device center starts up it just gets the standard stopped running vista message and trys to restart unsuccessfully!
This may help you out with your problems however cant seem to resolve mine
http://modernnomads.info/wiki/index...+Device+Center+Troubleshooting#Beforeyoustart
Click to expand...
Click to collapse
What I did from there was I uninstalled the drviers that correspond with the HTC Sync USB and the advanced network functionality (it's near the bottom of the link), and then I restarted again...now I seem able to sync...
i was connecting fine until i enabled vistas firewall and then it wont stop syncing. if i disable it, it will sync. i went through the exceptions list to allow sync but it still wont sync anyone know a fix?
Mobile Device Centre was working fine for me until about a week ago. Then it just stopped working ! My device was ok because it would sync in XP SP3 without any problems, but not in Vista. I tried repairinng, uninstalling, reinstalling without any success, I tried Advance Network Functionality and still no luck. I also tried disabling my firewall and trying again and still NO !!!. After searching the internet and trying the above, I nearly gave up until I decided to do the following :-
REMOVE ALL drivers related to the device i.e MS RNDIS adapter from network adapters in device manager AND the HTC USB drivers which are created when the device is connected while the Advance Network Functionality button is unchecked on your device (within settings -> Connections -> USB to PC )
UNINSTALL windows mobile device centre
DISABLE your firewall
INSTALL windows mobile device centre 6.1 (downloaded from MS)
connect your device - ensure the Advance Network Functionality button is checked
CONNECT device, let the drivers load and it should be ready to sync
ENABLE your firewall
The above method was the way it worked for me after trying numerous methods. Looking back, I believe my problem started when I unchecked Advance Network Functionality for some reason !
Subversive Asset 2.0 said:
I have NEVER gotten advanced network fuctionality to ever work--when I was at home, my dad had a router set up and when I'm on campus, the dorm has a router on.
Even without it connected to any other network, it does not work. And I am using the latest WMDC 6.1 but still, it doesn't work.
Click to expand...
Click to collapse
I don't think it's possible to get Advanced Networking Functionality to work with a Bluetooth Connection, only through USB. Even then it has to be a high quality USB port it's plugged into. My case is a good example in that I couldn't enable Advanced Networking Functionality or Activesync simply wouldn't connect. Since I was having unreliable connections from my VIA chipset old as the hills USB 1.1 motherboard ports, I installed a quality NEC chipset USB 2.0 Hi-Speed PCI adapter card and now on the same machine I can run USB Activesync connections with either option perfectly well and it stays connected until I unplug the phone. How are your USB ports?
uninstall active sync then reinstall. that is what worked for me.
Have Windows XP SP3 and Microsoft ActiveSync 4.5 installed.
Problem is that the ActiveSync will not connect to the Diamond via USB. These are the symptoms on connecting the USB cable:-
1) The "Connect to PC" window pops up on the Diamond, asking whether I would like to ActiveSync (sync with Outlook) or Disk Drive.
2) I choose either one and Diamond pops a dialog to declare that the device is connected.
3) ActiveSync on my pc goes into a "connecting..." attempt, but eventually throws out a "ActiveSync cannot connect to the Windows Mobile powered device" msg.
4) Diamond goes back into its Today screen, nothing happens.
I have tried :
1) disabling/uninstalling my firewall
2) checking/unchecking the Start->Settings->Connection->USB to PC->
"Enable advance network functionality" checkbox
3) Microsoft ActiveSync 4.2
4) a fresh install of windows.
****while I was at this I did manage to get ActiveSync to respond/connect seemingly for a while, during which I recall she popped up a msg saying that since I don't have MS Outlook installed, if I do proceed I can't sync contacts etc. I clicked cancel thinking I should install MS Outlook first since I do want to sync contacts, and I never managed to see this msg again****
Sorry for the lengthy post, appreciate any responses/help from gurus; noob.
I had the same problem with u also at 1st than reinstall Microsoft ActiveSync 4.5
& tick Enable Advance network functionality
now ok liao
think u got to restart pc after u install Microsoft ActiveSync 4.5
Thanks but doesn't solve my problem, still.
Can I check what does you guys' Diamond show up as under Control Panel->System->Device Manager? If you look under Network Adaptors does it show up? Mine only shows up under Windows CE USB Devices->Pocket PC USB Sync. I recall that it should show up under Newwork Adaptors too?
forget to ask u did u install the prog for desktop which come with the cd?
harky said:
forget to ask u did u install the prog for desktop which come with the cd?
Click to expand...
Click to collapse
Sorry, what CD/program? I only have a Windows Mobile Interactive CD.
**********
Damn found those CDs. But after installing the Outlook 2007 Trial, still nothing happens. What program for desktop should I be installing? The other CD seems to only contain those like applications and should not affect me?
sorry i forget wrongly.. try to install again & restart ur pc.. see how.. maybe restart ur diamond also
same problem here also
epiphone said:
Have Windows XP SP3 and Microsoft ActiveSync 4.5 installed.
Problem is that the ActiveSync will not connect to the Diamond via USB. These are the symptoms on connecting the USB cable:-
1) The "Connect to PC" window pops up on the Diamond, asking whether I would like to ActiveSync (sync with Outlook) or Disk Drive.
2) I choose either one and Diamond pops a dialog to declare that the device is connected.
3) ActiveSync on my pc goes into a "connecting..." attempt, but eventually throws out a "ActiveSync cannot connect to the Windows Mobile powered device" msg.
4) Diamond goes back into its Today screen, nothing happens.
I have tried :
1) disabling/uninstalling my firewall
2) checking/unchecking the Start->Settings->Connection->USB to PC->
"Enable advance network functionality" checkbox
3) Microsoft ActiveSync 4.2
4) a fresh install of windows.
****while I was at this I did manage to get ActiveSync to respond/connect seemingly for a while, during which I recall she popped up a msg saying that since I don't have MS Outlook installed, if I do proceed I can't sync contacts etc. I clicked cancel thinking I should install MS Outlook first since I do want to sync contacts, and I never managed to see this msg again****
Sorry for the lengthy post, appreciate any responses/help from gurus; noob.
Click to expand...
Click to collapse
hello..i have the same problem..regardless of what i try it just wont sync..doesnt even
register ive connected my phone..installed..uninstalled..restarted the lot..so any ideas ?
i'm having similar problem. i'm using win xp sp2 and active sync 4.5. when i plugged my diamond to usb, the pc just showed "usb device not recognized" and it was recognized as "unknown device" in device manager.
i tried to uninstall the "unknown device" and reconnect diamond again. it worked but only once. after disconnect and reconnect again, it failed
i've tried using same cable and port for cruise and everything went smooth. dunno what it is...
replying back to my own thread.... i eventually managed to get it to work simply by changing the USB port I was using, not sure why at all.
I just got my diamond connected to my pc successfully. I simply used another usb cable.
Seems diamond is more sensitive to cable quality than other HTC devices.
HTC Diamond, problems with Windows Vista
I have so much problems syncing the Vista with the HTC Diamond. It took me one whole night and the program shows that it is halfway through the hotsync but nothing else happens. Uninstall and reinstall the Active sync programme on my Vista several times. Finally it works. The next day when I did a hotsync with my office computer nothing happens. After that when I got home Vista does not sync with my Diamond again. I do not know the problem is with Vista or my HTC Diamond... I wasted so much time troubleshooting..
I've found the solution. It had nothing to do with
Vista or with WMDC 6.1 it was a setting on my HTC S710. I removed the
following setting:
Step 1: Press Start
Step 2: Select settings
Step 3: Select (6) Connections
Step 4: Select (0) More
Step 5: Select (1) USB to PC
Changing the type of USB connection your device uses can help with problems
connecting ActiveSync.
Step 6: Disable the option - Enable advanced network functionality
Step 7: Press done 3 times
Step 8: Return to main screen.
Step 9: Uninstall unrecognized USB device in device manager (on PC)
Step 10: reboot Phone and reconnect
Hi, in my case it was the USB cable. I replaced the one I used for all my other WM devices before and now even the Diamond can connect.
Cheers,
Derek.
PS: problem and solution seen on both Vista and XP
Hotas said:
Hi, in my case it was the USB cable. I replaced the one I used for all my other WM devices before and now even the Diamond can connect.
Cheers,
Derek.
PS: problem and solution seen on both Vista and XP
Click to expand...
Click to collapse
Work for me too.
Tnx!
Hmm for those that tried and suddenly u got it once,but after that u disconnect and it disappear dont do anything extra!!!
Cos i got the same problem too! instead try to connect and remove it till u get it to sync again. It takes me the most 2 tries to get it to sync though..but if u try like maybe 5-6 times and it dont work..then i cant help sorry.
Btw i'm on Vista Home Premium 32 Bit.
This was what actually happened...i post this in another forum where people are having problems too.
"Hmm me having problems with syncing HTC diamond just now also. I'm on Vista Home Premium 32-Bit. I downloaded and installed the Window Mobile Device Centre(WMDC) 6.1 as they asked me to. WinXP its AutoSync 4.5. I connect and kind of expected this stupid syncing problems will happen to me like many others..zz.
I keep on trying to play with the checkbox in the USB to PC settings(To go there its Start>Settings>Connection Tab>USB To PC), people were saying if u uncheck the box it will sync already.But now my box is checked and it still can sync
Finally i got really fed up and piss..so i uninstall the stupid WMDC program totally without even plugging out the USB cable from my Diamond.Then i restart my pc, and i went to restore the USB to PC settings to ActiveSync with the tick in the checkbox. When Vista startup, i went for 1 last try haha...i just connect the diamond to my PC via the usb cable,and wow all the drivers start to install...and it sync LOL!!! And i go to control panel and was puzzled when WMDC was there even though i uninstalled it !!
And now its just sometimes i plugin it never detect but if i plug in and out ard 1-2times again it sync! I'm a happy man now"
snufkin said:
I just got my diamond connected to my pc successfully. I simply used another usb cable.
Seems diamond is more sensitive to cable quality than other HTC devices.
Click to expand...
Click to collapse
Yes - that's it.
I had the same problems - ActiveSync worked worser and worser - and last week no synchronisation was possible at all.
ActiveSync doesn't open or when it's opened - the PC-ActiveSync stayed grey...
Now - new Cable - not from HTC - and it works fine from the first time on
epiphone said:
Thanks but doesn't solve my problem, still.
Can I check what does you guys' Diamond show up as under Control Panel->System->Device Manager? If you look under Network Adaptors does it show up? Mine only shows up under Windows CE USB Devices->Pocket PC USB Sync. I recall that it should show up under Newwork Adaptors too?
Click to expand...
Click to collapse
I'm using XP SP3, ActiveSync 4.5.0 and it works fine. Of course after UNticking (disabling) the advanced network functionality. This advanced network functionality is designed for Vista, not for XP&ActiveSync.
Device manager:
In Device Manager I have the device listed with a separate entry directly from the root called "Windows CE USB Devices" and not under Network or other section. The driver provider is Microsoft and driver version is 4.0.4232.0 (06.10.2004). The driver file is wceusbsh.sys.
See the attached files.
I just don't remember from where I downloaded the driver, but for sure I did not used a CD/DVD delivered with Diamond.
issues synchronising
so i'm using activesync 4.5 with XP SP2 (i think) and i cant get my device to synchronise.
i connect it to the computer and it connects perfectly (i can explore the device and install files on it from my comp and all). It then starts trying to sync, however it never does. After an extended period of time it says "waiting for network" and then just stops synchronising - without actaully syncing any of my files! on the device it says "the server could not be reached. This could be caused by temporary network conditions" as the result and gives a support code of 0x80072EFF. it reports nothing ever synced.
It syncs with another computer in the house nicely -the comp is however ancient and we are getting rid of it! I'm sure its just a setting but i cant find it! Anyone?
Cheers guys!
Issue solved!
Not to worry i found the issue!
if this happens to anyone else this is the fix i found
"Fellow frustrated users I have worked out this issue. What happens is if you restore your computer or change files or link to another computer, Activesync creates multiple datasets on the device which must confuse the program.
With the phone disconnected from the computer, open Programs, ActiveSync, Menu, Options. If you use the scroll down bar, you will find all the datasets. I deleted all the datasets and let ActiveSync create a fresh connection."
Hi,
I'm having difficulties working with my windows mobile device via my home PC (work laptop is fine). I am able to sync with my phone fine through activesync to transfer contacts etc but I am unable to browse the device contents from my PC via activesync or via windows explorer.
The device does not show up in explorer and when I try to click "Explore" from the activesync interface nothing happens.
One odd thing which I think may be related is that whenever I plug in my phone over USB my PC things it is an internet gateway and it appears in my PC's network connections as "xd". Looking at the properties for this connection there is a single service listed:
MsNMsgr (192.168.0.2:10020) 36583 UDP
Host PC - Windows XP64 Professional
ActiveSync 4.5.0 build 5096
Device - HTC Kaiser
Hyperdragon3 ROM
Any help with this would be very much appreciated
Cheers
Stuart
I've searched and see people have had problems syncing with just one pc but me well I want more LOL, does anyone know a way to sync between 2 pc's as I would like to run on my laptop as well whilst out and about.
I have a feeling the answer will be that it can't be done but its worth an ask!
Smit
I sync with my PC and my laptop but not "out and about" whatever that might be. I sync my contacts/calendar/notes and transfer files and ROM flash with the desktop PC and just transfer files and occational ROM flash with the Laptop. All you need to do is install AS/WMDC on the other machine and connect, create another partnership with an unique source server name.
Yeah I do it too. It all just works automatically.
yeah, me too, I sync with AS in my office PC in winxp and with WMDC in my laptop in winvista.
rodrix said:
yeah, me too, I sync with AS in my office PC in winxp and with WMDC in my laptop in winvista.
Click to expand...
Click to collapse
I wish I could say the same but it just keeps asking me to delete one pc
LOST!
mmmm, it happend the same to me but with a third PC (my home PC) but I told it to only connect not to sync, and it connects and the PC recognices the phone I can browse to the folders and the storage card, but again not sync.
Sorry I miss read your 1st reply and it seems were in the same boat