Disable device lock after powering up? - Tilt, TyTN II, MDA Vario III General

After several minutes of inactivity, my Tytn II powers off normally. When I want to use it again, I press the power button. This powers on my device, but it is locked. I need to press the left soft-key and press "unlock" before I can start using my device again.
Is there any way to disable this? I want to start using the device immediately after pressing the power button.
I think the power button is difficult to press as it is, so there is little chance it will be accidentally pressed in the pocket. So, if we set the key-lock to "lock all buttons except power button", it should be safe.

MY MISTAKE...
The culprit was the Battery Status plugin. There is an option to devicelock after wake-up that was checked. Maybe I accidentally checked it as I had this plugin before on my Xda2 then prophet and now the TyTn II and never experienced this before... Thot it was a "new feature" on the TyTn...

Related

New bug found in WM5.0 on my SX66, about the lock buttoms

Found a Bug after upgarde to WM5.0, The Power buttom doesn't work in the right way.
If i setup "Do not Lock buttoms" in system settings, the power buttom works just fine.
but if i setup "Lock all buttoms except power buttom", when the PPC is on, i press the power buttom, the PPC gose power off, i try to press the power buttom again, the PPC won't turn on. looks like all buttoms has been locked, even power buttom.
Dose any one know why? How to slove the problem?
Button lock works well on my MDAIII.

Using PocketToolMan 2 on Tilt

even though I click "suspend", the button that supposedly powers off the device, all that happens is the screen turns off only to come back when a button is pressed - am i missing something?
Start-settings-system-keylock Lock all buttons except power button
No luck...
that didn't do it - in Pocket Tool Manager 2 it specificaly says that the "suspend" command should power off the tilt - all it does with mine, even when applying your suggested settings, is turn the screen off - where can I get an app that shuts the damn thing off?
Hold the power key down for a full power off... press it and it will hibernate... and then wake up according to the key lock conditions shown above.

Standby with Hard Button Other than Power Button?

I have searched, but I have been unable to find a solution to my problem.
During my searches, I have discovered that many people, like myself, often struggle finding and pressing the power button to turn on and off the screen/phone.
I current use S2U2, which is a great piece of software, and even better since it is free. I use S2U2 to wake my phone up. I have set my settings to not lock the phone when device is off so to unlock/wake my phone I simply press any of the hardware buttons, and I see the S2U2 screen.
However, turning the screen off/putting it in standby is more of a hassle since I have to try and track down the tiny power button. I have downloaded and tried several free remapping programs but none of them allow me to remap a hardware button to standby/lock the phone. Generally, they only allow me to remap a hardware button to a program or setting other than standby/lock.
I would like to know if there was a way to remap a button to put the phone in standby.
I use BlackMe , more info on the website...
You could also try putting some "puffy" paint on the power button. It's that 3D paint people put on shirts etc. that bulges up when it dries. It makes a nice little bead to hit rather than trying to press the little power button.
The Reaper said:
I use BlackMe , more info on the website...
Click to expand...
Click to collapse
Does this program put the Tilt into SLEEP/STANDBY or just blank the screen. The author does not make this clear.
it just blanks the screen. I will keep up with this thread though, I have always wanted my PTT button to be my power button.....
yeah, me too. I am surprised that there isn't a solution yet....
I've always hated the hard to find power button as well. The PTT button is so easy to find and press, yet I've never, ever, not once accidentally pressed it. Why can't the power button be as raised up as the PTT one? I've seriously considered taking my phone apart and machining a replacement power button that stuck out farther. I'd probably make it out of aluminum to make it look cool, too.
But I'd be plenty happy in the mean time with remapping my PTT button to be a power button...
Yeah, I don't even need all the power button powers... I know the power button is used to do other things other than turn the screen on and off... I just want to use another button to turn the screen on and off and suspend the phone...
SPB Mobile Shell allows you to toggle the screen, suspend and many other options. I don't know if I would purchase the program just for it's button enhancing ability though.
Correction SPB Pocket Plus not SPB Mobile Shell
You could also check out AE Software at http://ae.inc.ru/
I dont know if this is kind of what you guys want, but heres my 2 cents. Go here to this thread http://forum.xda-developers.com/showthread.php?t=431328&page=4 and download Dave Shaw's awesome remake of psShutXP in post #34 (its the newest version)
Install to your MAIN DEVICE cuz thats where these shortcuts point to, then pick one of the 2 shortcuts I provided and just drop them in your main \Windows folder.
Hold down PTT button
Long_PTT
Quick push of PTT button
Short_PTT
Now, you can either just quickly push the PTT button or hold it down (depending on which shortcut you chose) and xdaShutdown will pop up giving you the option to RESTART,SLEEP/SCREEN OFF, or COMPLETELY SHUTDOWN your phone.
So essentially now, the PTT is your new power button. To put in standby mode just 2 button pushes is required. 1 push on the PTT button, then another tap on the Sleep button.
But if your really lazy and just want to be able to push PTT button once to put it in Standby/Sleep mode, then all you would do is find out the command to put the phone in standby mode (sorry I dont know it), then open notepad on your desktop, then type the command something like, this is ONLY AN EXAMPLE (42#"\Program Files\xdaShutdown\xdaShutdown.exe"), then save the file as either Short_PTT.lnk or Long_PTT.lnk and then drop the file into your \Windows folder.
But what about one push on the PTT button to wake it up out of standby? (without setting it so that all buttons wake it...)
Wow, I am an idiot. Haha. I never thought about the "wake up" part. Cuz once in Standby, the PTT button would then be non responsive so it then wouldnt work for waking the device. That is a tuff one, I have no idea how to specify what button(s) are locked/unlocked when in standby.
No way, you're not an idiot! I (and others I'm sure) totally appreciate your input. I just happened to have thought this over many, many times. I very well may have to go buy a bottle of that "puffy" paint stuff... sure would beat a full disassembly of the device to make a new, pronounced button!
I'm hoping I haven't misread the problem here, but if it is what I think it is, then you can do it with just S2U2.
I have my TyTnII set up as follows:
No button lock
S2U2 set to lock when backlight turns off
Backlight to turn off in 1 minute
In Setting/Buttons, assign "Button 4 (hold)" to S2U2
So I use it in a similar manner to the original poster. I "wake" it with a press of any hardware button (and obviously unlock it with a slide on the screen)
I lock/stand-by it by pressing and holding the OK button (it goes into standby after 1 min of being locked)
Hope that makes sense and is what you are after.
(nb am not 100% sure that the ability to set an app to run on the holding of a button is standard - I might only have that functionality dues to having SPB PocketPlus installed - am sure someone will let me know!)
Yes! this is what I was going for... I didn't even think about using your solution. Thanks!!!!
Does anyone have a problem with the hardware buttons not waking the phone up? I have my key lock setting not to lock buttons, but most of the time, my phone does not wake up when I press any of the hard keys. However, when I use the jog dial, the phone will wake up, but none of the other buttons will work.

X1 Auto Key Lock?

Hey I was hoping that someone new of a registry setting or 3rd part app that I could use to automatically lock the keys of my X1 after a minute or so.
I can only find the option to do it with a password in the standard settings and I'm sure that would get annoying after a while so I was hoping to do one without, just like that standard key lock.
Any ideas?
For me after one minute it will lock automatically and can only restore it with the power button (can lock the keys manually by pressing the power button key too).
See Start -> Settings -> System -> Power -> Advanced
Tick the second option and set your preferred time.
Do you mean the lock function from holding down the end call button?
larzulu said:
Do you mean the lock function from holding down the end call button?
Click to expand...
Click to collapse
Exactly, I would prefer that to the setting to turn the screen off and only being able to turn it on via the power button, if possible
Something like this. Have not tried it myself
http://forum.xda-developers.com/showthread.php?t=386451
Is there an app that uses something like iphone slide to unlock?
coolius said:
Exactly, I would prefer that to the setting to turn the screen off and only being able to turn it on via the power button, if possible
Click to expand...
Click to collapse
Sorry if this isn't what you are after, but...
Start -> Settings -> System -> Power -> Advance
On battery power:
[x] Turn off device if not used for: [3 min \/]
Start -> Settings -> System -> Key Lock
When device is in Sleep mode:
(x) Wake up the device by pressing the POWER button
...results in my phone going to sleep after 3 mins of no use, with the only way to wake it by pressing the power button (or to have an incoming call)
artesea said:
Sorry if this isn't what you are after, but...
Start -> Settings -> System -> Power -> Advance
On battery power:
[x] Turn off device if not used for: [3 min \/]
Start -> Settings -> System -> Key Lock
When device is in Sleep mode:
(x) Wake up the device by pressing the POWER button
...results in my phone going to sleep after 3 mins of no use, with the only way to wake it by pressing the power button (or to have an incoming call)
Click to expand...
Click to collapse
Yeah in those 3 minutes the screen takes any touch as an input though, while being in your pocket.
I don't get it, if you hold down the close call button the phone locks itseld and you get a click here to unlock screen if you touch the screen. Why can't the X1 have an option to enable this after x seconds?
Hell, my T630 has that.
gold333 said:
Yeah in those 3 minutes the screen takes any touch as an input though, while being in your pocket.
I don't get it, if you hold down the close call button the phone locks itseld and you get a click here to unlock screen if you touch the screen. Why can't the X1 have an option to enable this after x seconds?
Hell, my T630 has that.
Click to expand...
Click to collapse
What's wrong with the power button lock? It is almost the same, the difference is that you don't have to touch the screen to unlock but press the power button.
I don't understand at all this topic. The topic starter said he wants a lock without pressing anything after one minute. The solution provided by me and artesea is exactly that. Again the only difference is the unlocking method which instead using the screen you press the power button.
People are quite finicky these days....
I find this annoying also.
I now have to lock my phone (holding down the end call button) and then push the off button when I put it in my pocket. Would be better if theres an auto screen off and keyboardlock when you push the off-button.
Sorry, do we have different phones??????
To "lock" my phone I press the Power button, everything goes dark and I can put it in my pocket, doesn't matter if I hit the call button or tap the screen, the only way to "unlock" the phone is to press the Power button again.
If I forget to press the Power button after 3 minutes (but you can set this as low as 40 seconds) it "locks" the phone for me.
No need to press the End Call, or tap on the today screen.
dadeadman said:
Is there an app that uses something like iphone slide to unlock?
Click to expand...
Click to collapse
yes, and its called 'slide 2 unlock' or s2u2
2 seconds of googling leads you back to xda-dev: http://forum.xda-developers.com/showthread.php?t=412418
artesea said:
Sorry, do we have different phones??????
To "lock" my phone I press the Power button, everything goes dark and I can put it in my pocket, doesn't matter if I hit the call button or tap the screen, the only way to "unlock" the phone is to press the Power button again.
If I forget to press the Power button after 3 minutes (but you can set this as low as 40 seconds) it "locks" the phone for me.
No need to press the End Call, or tap on the today screen.
Click to expand...
Click to collapse
I used to just press the power button and put the phone to sleep too... but then after a could long flight I found out that 1) if I put my phone in my jeans' front pocket (or actually... anywhere that have a chance to bump the power button), I can hit the power button and 2) once I hit the power button, the phone wakes for a couple hours trying to search for the network in the sky... and thanks god the plane didnt crash because of that but it did drain all the battery
I dunno if you have seen this too, but I realized that happened to me a couple times (not only on the plane but when I was walking as well) and eventually I decide I will hit the end call button to lock the phone before I hit the power button
this also happened when I had S2U2 installed... but since I didnt find it too useful (very nice if you want a iphone feel... but I already had an iphone for too long =P) and I dont want another application running in the background I decided to use the lock button instead
I was looking for automatic keylock too .. and then I too relized I don't need it ! Automatic screen-off is all I need.
For everyone who doesnt understand this thread, hold down the end call button and wwatch what happens.
The benefit is that yiu can see updates, email, sms, etc because the screen remains on for a while.
gold333 said:
For everyone who doesnt understand this thread, hold down the end call button and wwatch what happens.
Click to expand...
Click to collapse
Sorry but if you read what was originally requested from the poster, you'll see what he was after was exactly what XavierGr and myself have suggested.
there's a programe named S2U, may be it can solve your problem
calvinzhang said:
there's a programe named S2U, may be it can solve your problem
Click to expand...
Click to collapse
aaa..a lil help needed..i want to lock (the end call button lock) to happen automatically.
NOT the POWER button lock....
When i long hold the cut-call button, (which also has a lock icon on it) to happen automatically and is there a setting anywhere???
Try TouchLockPro, ever the best, even if just a few function is working on Xperia.
But actually this is what you are looking for.

Reactivate after being in "sleep mode"

Hi
When my HTC remains inactive for 5min or more its programed to go into sleep mode.
to "re-awaken" the phone i have to press the power button on the right side off the phone.
Can I assign the awake button to another button on the front of the phone? The power button is tiny and sunk in and I have to fumble around to turn it on.
The motorola touch phone i was using prior to HTC would reactivate from sleep mode when i touched the screen, Is there a way to get a similar result on the HTC?
Thanks in advance

Categories

Resources