Is there a program that will allow you to control what network the Kaiser will connect to?
For instance If I don't want to connect to 3G (MEdia Net) and I just wanted to use a wireless connection for my internet, etc. is there a way to set the phone to only use a wireless connection? or vice versa? without deleting the MEdia Net Connection.
Also, is there some type of networking control panel that I can use to add wireless networks and hot spots?
TW,
You can create new dummy data settings and set them as your default so if you attempt to connect when not in wifi range by mistake it can't connect (you can then change it back to Media Net if you really need it)
Start, settings, connections tab, wifi is where you add new wlans.
Then won't the phone go through the "trying to connect..." then error out after it can't?
Isn't there a better way?
Related
Ok, this was working fine on the original AT&T ROM, but since I flashed to dutty's ROM, I cant get it to work. How do I force the phone to use wifi for net access when wifi is turned on, as opposed to medianet? Currently, I have to keep manually switching from medianet to "my work connection" in connection settings.
You can use Kaiser Tweak to set it to disconnect the GPRS connection after a set amount of minutes of inactivity. Then, when you enable WiFi, it should connect ONLY to WiFi.
I think the OP needs to sort out his "work" and his "internet" instead of just trying to turn off radio data.
I have medianet set to internet and my wifi set to work...not really clear what "work" is....just want to automatically use wifi when wifi is connected, and cant find the option to do that.
Anybody???
I did set both connections to "work".
Additionally I added my tmobile gprs connection to the work profile.
All seems to work great.
I can acces my network shares over wifi and connect to the internet. When no wifi is available it connects via gprs.
I keep getting confused on this same issue. i installed the same rom we are talking about. it shows up for me when setting up email accounts. with my wifi turned on, it still tries to go out the 3g connection. I want it to use wifi if that is what is turned on and i think that was working on the death star rom. For the drop down that says "The Internet" I basically want that to point to wifi if on then fall back to 3g. How do we do that?
It should not be named "work".
So whats the solution here?
Under Connections....Select which networks are automatically used:
Programs that connect to the internet should connect using ???
I can either choose Medianet or my work network, I'd like for it to use wifi when available, how is this done?
Programs that connect to a private network should connect using ???
I have this set to my work network.
Easy Solution to 'Auto Wifi"
Buy an Iphone, works seemlessly, and you get a browser too which works, something these HTC phones havn't had in 3 years.
The easiest way to force wifi (since gprs can be acting as a ***** ), is to keep wlan enabled and to install the NOGPRS.cab (aka the modaco nodata plugin) which allows you to disable (but keep) the gprs settings and which you can toggle on (and back off) when needed.
Great little app, saves much annoyance!
Is there an easy way to toggle wi-fi on/off, that can be assigned to an icon or button? At the moment I have to open Comm Manager each time and do it from there.
Rob F
I was wondering if there was a way to disable Media Net's automatic connecting whenever I open Internet explorer. I only use wifi for the internet. I disabled it using Kaiser tweak and that worked but then I cannot recieve MMS without MEdia Net enabled. I don't have a problem with it being enabled I just don't want it to automaticly start connecting. If it cant be disabled for everything but mms I would rather have a prompt.
Thanks.
MoDaCo NODATA
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility/
EDIT: I should have read before posting. I'm not sure about the MMS part as I don't use the NODATA program. I was just thinking on the disabling data what I did for my moms phone. Sorry.
I tried that program and it has made it easer to enable/disable MEdia Net, but If there is a way to just make it not automatically connect that would be better. I really hate being charged for the data connection when I don't want to
Has nobody else wanted to get rid of the automatic connecting?
This is the way I disabled the automatic connection on my tilt with stock at&t rom. I don't know if it will work on other kaiser models/ roms since I'm still new with windows mobile (only had the tilt for a couple of months).
go to start>settings> connections tab.
select connections, go to advanced tab.
go to select networks.
On "programs that automatically connect to the internet should connect using:"
I changed it from MEdia NET to My Work Network (since I don't use a work network it is not set up). I also switched the second option to my work network just in case.
Since "my work network" was not set up, whenever internet explorer or any other program tries to connect, it will show a "cannot connect" error unless wifi is already activated. however I can still send/recieve MMS since the MEdia net is not disabled.
If you need to use MEdia net on IE you can just switch the opiton back to media net.
I'm still fairly new to windows mobile and my tilt, and I couldn't find a way to do this after searching for days, so i just kept messing with the connections settings until i found this. This is the first time I got a chance to help someone here so I hope it's what you're looking for!
Thanks a lot, it works great!
So I thought this worked but I relized when I make Media Net not auto connect I cannot send or recieve MMS. Is there a way to only allow messaging to auto connect and then disconnect when done?
um why dont you just go to your connection settings and delete your "my connection" its not hard
If I were to do that then I cannot send/receive MMS. That is the dilemma.
go to connections and switch it to "My ISP" and delete the gprs setting from "My ISP"
I just got the data plan and have yet to be able to connect to it? I've tried messing with the KaiserTweak settings. I have data connections enabled. I also enabled leave connection always on but that gave me the connection is not active icon. When I disable that function all I get at the top of the screen is an "H". What do the settings need to be in order to get the data connection properly functioning? I've yet to see the connection is active icon up top.
Update
I am able to update the weather on the HTC home page I'm using by enabling the data connection on all the time but the browsers still do not connect. I also don't see the active data connection icon.
did you uncheck proxy ? if not , do so
Proxy is already unchecked.
You do have a data connection the H means = HSDPA
(Like a 3G connection but faster)
http://en.wikipedia.org/wiki/HSDPA
Also try refreshing your settings (This works for me... and it's annoying!)
Start>Settings>Connections>Connections>Manage my existing connections.
Then "Next" thru all the settings until you get to the end. Press Finish. The data connection drops and the re-establishes.
See if your browser then works.
When I follow that path under connections I don't see a manage my connections option. All I see is "My work network" with 3 options under that. Add Modem, add vpn server and set up proxy.
Try this
Try these files. I use them whenever I flash a new rom and haven't had any trouble connecting since then.
One has all the medianet/isp settings and the other is for mms. I know you didn't say you have a problem with mms, but just in case
Just run and reset and everything should work.
Thanks, I'll have to try those when I get home. The browsers do connect to Wifi with no issues. Could there be a conflict with that? When there is wifi connection available which connection will it grab onto? Wifi of MediaNet? Those files won't affect the current wifi settings used to connect will it?
FuSchnickens said:
Thanks, I'll have to try those when I get home. The browsers do connect to Wifi with no issues. Could there be a conflict with that? When there is wifi connection available which connection will it grab onto? Wifi of MediaNet? Those files won't affect the current wifi settings used to connect will it?
Click to expand...
Click to collapse
I've never had them interfere with WiFi since I use WiFi at home and MediaNet at work.
The settings cab is a pretty simple cab, it really just fills out all the information in the boxes to set up the connections but it saves a lot of time and gets everything right, for me at least, in one shot.
Let me know how it goes.
I tried those cabs and I still can't get any of the browsers to work. Nor my email. I keep getting a connect connect message. Anyone know the proper settings to get the browsers to work? However the weather is able to update on my HTC home page.
i dont nknow if youve tried this but everytime i flash a new rom i have to do this or ill have the same problem.. in your connections settings go through the meus until you find this device connects to: and by default it should say the internet.. but you have to select media net (att right?) cus thats the only way apparently media net is not the same as the internet!
ex: go to setings > connections > connections (icon) > advanced > select networks > "programs that automatically connect to the internet should connect using: and itll probably be set to my isp and you ewant it on MEdia net
Hi2all!
I have Diamond 1.93 ROM, and i am using WiFi @ home & work.
But on other places i must use EDGE or GPRS (no 3G networks).
Question is simple - each time i want to use EDGE i need to go into settings -> connections and set that programs using internet should use "this" connection.
How to "teach" my diamond to switch automaticaly i.e when wifi connected - use wifi for internet, otherwise - edge.
Thanks for replies!
If Wifi (or wired ActiveSync connection) is already connected, it will be used for Internet. If not, the device will try to etablish an Edge or GPRS or UMTS connection.
If you don't want the tool to automatically connect to EDGE etc. use nodata.cab (search here in this forum) to disable / enable the connections when needed / not needed.
What I'm still searching for, is a solution to somehow priorize the available connections. Like first try to find an open WLAN and only if there's no WLAN available then ASK to open a mobile connection. Mobile data connections are still expensive for most of us and so the automatical attachment is bad. On the other hand, keeping Wifi always open consumes to much battery.
I want my Internet Connection to set up what ever program is trying to access internet e.g email checking, wheather updates or just browsing in such a way that
if phone is connected via Active sync use desktop InterNet connection.
else trun on wifi and check if I get connection then use that connection
else use my medianet connetion
Is it possible to set up like that?