There are two small buttons (each marked with a small horizontal line) on the keyboard. The left is over the letters R and T. It is assigned to the "Send" button for email. The trouble is that it is very easy to hit by accident when typing R or T, and then the email flies off prematurely! The right one is assigned to the Menu and if you hit it by accident, it is easy to correct (just hit the OK button). Is there a way of remapping these two buttons? Except for this issue, the email with Kaiser is perfect. Does the AT&T Tilt have the same problem?
See my thread here. Those are the same as the softkeys on the font keypad (so remapping one remaps the other). I ended up using AE Button Plus to remap those (and other keys) to other functions, which I like because of the additional functionality that can be assigned to double clicks, triple clicks, etc. But if you just want to remap it to something else, check that thread for some alternatives.
dscline said:
See my thread here. Those are the same as the softkeys on the font keypad (so remapping one remaps the other). I ended up using AE Button Plus to remap those (and other keys) to other functions, which I like because of the additional functionality that can be assigned to double clicks, triple clicks, etc. But if you just want to remap it to something else, check that thread for some alternatives.
Click to expand...
Click to collapse
Err... I don't think this addresses the problem the OP has. I too suffer from this problem (must be big fingers!).
When using Outlook the soft keys change function so remapping the Today Calendar softkey, for example, doesn't help.
Anyone else got a solution to this problem, I'm fed up with sending half-finished e-mails!
I haven't played with AE Button Plus, but if you can assign "No Action" to a button (which some of the add-ons let you do) and do that for the messaging app specifically, then that would be a solution to the problem of large fingers/thumbs. The you could remap one of the FN keys you never use to the context menu or send...
TexasPenguin said:
Err... I don't think this addresses the problem the OP has. I too suffer from this problem (must be big fingers!).
When using Outlook the soft keys change function so remapping the Today Calendar softkey, for example, doesn't help.
Click to expand...
Click to collapse
As PerfAlbion pointed out, you can just remap them to nothing. I remapped these keys, not because of the problem with the keyboard, but simply because I never used them since it's just as easy to use the touch screen. But if you want to maintain the softkey functionality on those buttons, use AE button to map a single press to nothing, and a double-click (or even a click-hold) to the softkey function. You would then still be able to use them for their original purpose, but they wouldn't be as easy to accidentally activate.
dscline said:
As PerfAlbion pointed out, you can just remap them to nothing. I remapped these keys, not because of the problem with the keyboard, but simply because I never used them since it's just as easy to use the touch screen. But if you want to maintain the softkey functionality on those buttons, use AE button to map a single press to nothing, and a double-click (or even a click-hold) to the softkey function. You would then still be able to use them for their original purpose, but they wouldn't be as easy to accidentally activate.
Click to expand...
Click to collapse
I'm sorry, I must be missing something obvious here.
Any of the soft button remappers will NOT work on application-specific softkeys - AE ButtonPlus specifically says this in it's FAQ. Remapping the "send" key is application-specific - it only becomes the Send key when you launch Outlook. So how did you manage to re-map this key?
TexasPenguin said:
I'm sorry, I must be missing something obvious here.
Any of the soft button remappers will NOT work on application-specific softkeys...
Click to expand...
Click to collapse
The distinction is between remapping the softkey, or remapping the hardkey that correlates to the softkey. What the remappers can't do is change the function of the softkey... if, for example, Outlook is coded to make the left softkey the send key, you can't change that. That's programmed in to Outlook. But what you CAN change is whether or not the hard button that corresponds to the left softkey is recognized as the left softkey. For example, I've remapped the single press of the hard keys that correspond to the L & R softkeys to copy and paste, respectively. If I open Outlook, the soft softkey (the button on the touchscreen) is still going to be send. But my hard button is no longer mapped to be a softkey, it's mapped to be copy.
I used all the programs from the thread that you pointed out, including the cab file that was mentioned. This allowed me to change the left front soft key but does not affect the assignment of the left keyboard soft key as "Reply" when in email mode and with the keyboard slided out. Is there a way to change the left soft key assignment only for the email (eliminate the reply option) or just inactivate the left soft key altogether? I have installed the SoftKey applet form your thread in my Settings.
I sent my reply to one of the earlier messages wihout having read all the answers that came after it....I was out of the office for a couple of hours..my apologies. I will find the AE button plus and give it a try, but is there any registry solution? they usually work the best.
I downloaded and used the AE Button Plus, and it worked! I set it to double press and that did the trick. The program is very good by the way, the only one that allows multiple pressing options, etc.Many thanks!
I have benefited from this thread!
Thanks everybody.
Adequate description on the issue provided, and adequate solutions and then a follow up post.
A really appealing solution would be to isolate the keyboard softkeys from the front ones. I tried the double press method but it turned out to be incredibly annoying and I'm not sure that constant annoyance is outweighed by an accidental softkey hit on the keyboard. What I'd like to do is disable the keyboard softkeys while leaving the front ones completely intact on a single press.
I find it surprising that you even need to use the softkeys, period. I came to the Kaiser from a Smartphone edition phone (no touchscreen), which I had for for over two years. So I was completely accustomed to using the smartkeys. Yet, surprisingly, once I got the Kaiser, I found myself immediately and instinctually accessing their functionality from the touchscreen rather than the hard buttons. Perhaps because the hard buttons aren't directly under the screen like they were on my smartphone, so the tie betwee the label and the button wasn't as obvious as it was on the smartphone.
dscline said:
See my thread here. Those are the same as the softkeys on the font keypad (so remapping one remaps the other). I ended up using AE Button Plus to remap those (and other keys) to other functions, which I like because of the additional functionality that can be assigned to double clicks, triple clicks, etc. But if you just want to remap it to something else, check that thread for some alternatives.
Click to expand...
Click to collapse
Thank you, AE Button Plus worked great. I just deactivated the "Left Softkey" and now I don't have to take care of that damned button anymore.
dscline said:
I find it surprising that you even need to use the softkeys, period. I came to the Kaiser from a Smartphone edition phone (no touchscreen), which I had for for over two years. So I was completely accustomed to using the smartkeys. Yet, surprisingly, once I got the Kaiser, I found myself immediately and instinctually accessing their functionality from the touchscreen rather than the hard buttons. Perhaps because the hard buttons aren't directly under the screen like they were on my smartphone, so the tie betwee the label and the button wasn't as obvious as it was on the smartphone.
Click to expand...
Click to collapse
I've been using touchscreen pocket pc's for a while and no such instinct has kicked in.
so no one has an answer besides installing that AE button plus prog on the phone?
try removing the actual key. i wouldn't try it but it may work.
I'm really glad I found this thread, I keep sending half written and blank sms messages because of the left soft and keep doing weird things because of the right one. It's gonna cost me a fortune in text messages so I'm gonna go try that prog mentioned.
It would be better for a solution more specific to the application but this is certainly better than nothing!
the best solution I can think of is:
- remove the sender name whilst creating email.
if you accidently hit send it will prompt for sender info. when you are ready to send, simply insert the contact details in and all is well.
hope this helps some of you
firstbuddha said:
the best solution I can think of is:
- remove the sender name whilst creating email.
if you accidently hit send it will prompt for sender info. when you are ready to send, simply insert the contact details in and all is well.
hope this helps some of you
Click to expand...
Click to collapse
I think we have a WINNER SOLUTION
Hello everyone,
I'm *sure* I saw this before since I used to have it before I flashed, but can't find it no matter how I search...
How do I wake up the phone not only by pressing the power button, but also by scrolling the, erm, scroll wheel?
I know it must be dead simple, but...
So thanks for putting up with me
Cheers
T
settings->system->key lock-> do not lock buttons
My *god* I need more coffee (it's morning this side of the globe)... Please shoot me, somebody, then delete this thread. Tsk!