Related
Hey guys, sorry if this has been addressed already, but I've been searching off and on for this for awhile. I finally took the time to read through that 60+ ptt post in the hermes forum but didn't see anything.
I've installed sleuth's PTTFix cab, but lock and unlock don't seem to be in the list of "apps" to choose for button 6. Is there any way to add the lock/unlock feature to the buttons menu, or is there a separate app to do it perhaps? I would love to be able to press the PTT button to lock, and then press and hold to unlock. I have a relatively dirty job and touching the screen after getting a text message is just too painful. I don't like spending 10 minutes cleaning the screen every time I have to tap that unlock key.
Anywho, I've been a Tilt owner for about a month so far and I love it. This forum is why I chose the Kaiser and I love the feeling of community.
Cheers!
I've been looking around for a few days and I still can't find anything on this. I would even love something to make it a one button unlock, or even two buttons, as long as I don't have to touch my screen.
Anyone have any ideas?
I had an 8125 and now I have a tilt. In making the switch I have run into a few anooying problems that I am sure someone already solved? I have looked all over the forums so if these are answered, could you please point me in the right direction?
1) The ever popular PTT issue. Took me a while but I got it going. It was interesting that there was an incompatibility between the fix and BatteryStatus. Not sure what THAT was about? But it is working now.
Soooo...How do I get button FIVE to appear on my button maps? Neither the stock button feature in the settings nor AEButton Plus shows button 5, the camera button. It would also be kewl to map the OK button on the side, but I am guessing that is too much to ask? *Blink*
2) I have set the brightness at about the medium level (that was a disappointment because I was able to set it to the lowest on the 8125) but somehow the backlight keeps going dim after a time. I have looked all over the parameters to configure this but I can't find it? How do I keep the display from going dim on me? I have the tilt set to sleep at 1 minute and I do not have the backlight going dim at all, so I don't know what else to do?
3) Now that PTT button is mapped, I did what all of you did, I set it to Voice Command. But of course the push and hold I want the convenience of RECORD like I had on the 8125. I have tried all of the shortcuts and such I could find on this site and everyone of them put the voice recorder on my screen but did NOT initiate the record feature. Is there no way to do this on the tilt? I think I remember something about a parameter? /b or something like that? I tried to find it again but I was unable to.
Thanks for your help, guys...
Thomas <><
http://www.thomasamckean.com
Colonel, HOKC
Author, Soon Will Come the Light: A View From Inside the Autism Puzzle
Author, Light On the Horizon: A Deeper View From Inside the Autism Puzzle
ThomasMcKean said:
I had an 8125 and now I have a tilt. In making the switch I have run into a few anooying problems that I am sure someone already solved? I have looked all over the forums so if these are answered, could you please point me in the right direction?
2) I have set the brightness at about the medium level (that was a disappointment because I was able to set it to the lowest on the 8125) but somehow the backlight keeps going dim after a time. I have looked all over the parameters to configure this but I can't find it? How do I keep the display from going dim on me? I have the tilt set to sleep at 1 minute and I do not have the backlight going dim at all, so I don't know what else to do?
Click to expand...
Click to collapse
Hi Welcome
Not sure bout your other two questions, but the backlight is easy
Look in Start/Settings/System/ Backlight
You want the second tab, which is for Battery Power.
There you can set the timeout for it.
PS: If you have already tried this, then sorry for pointing it out, but sometimes the obvious solution is hard to find
AEButton Plus
I am able to remap both the OK button on the side and the Camera button with AEButton PLus.
I do have a slight problem that I am looking for a solution and hope someone knows the answer. When I remapped the OK button on the side, the first press still gives me the start menu no matter what I have it set for. The second press does the function I have programmed for double press. But is there anyway to not have it give me the start menu on the first press? I have it as none in the standard WM6 buttons panel. And I have it as lock phone on AEButtonPlus for both the first press and double press. But it always requires double press to make it happen. Any ideas?
-- Charley
I'm interested in remapping the ok button (the one on the side, below the scroll wheel, not the one below the end key) to rotate the screen. However, I can't seem to find out how to do anything at all with this button. Can anyone help?
i'd like this also.
I'm wondering if maybe this has to be done within the registry?
i remember reading in a thread before this that the remapping was not possible for that OK button... but i am not sure i could be wrong
try hbutton. it lets you map about anything to the hard buttons. you can map multiple programs to one button too. i use it to map the OK button to close a program, open htc audio, and screen rotate.
http://forum.xda-developers.com/showthread.php?t=306794
if you are referring to the ok button on the front of the kaiser, i remapped that button to rotate the screen from; settings>buttons. i am, however, using a sim free htc tytnII. this may not be available in the network branded versions. hope this helps.
sorry misread your post, you were talking about the side one. doh! no i couldn't remap that one either.
at this moment no one can really find the registry for that button. people have tried, i read about 3 posts that had people trying and they were unsuccessfull
i am still also interested in getting that button remapped
AE button plus will remap the side button, except if you are on the today screen, where a press of the button will bring up the start menu.
i currently have it to turn off the phone, since i friggin hate how htc made the real power button so flush with the body, so that if i'm on the today screen, i press it twice quickly to power off the device. the first press brings up the start menu, then the second press will take the focus off the today screen and implement your action. likewise, hitting the side button will turn off the phone if i'm in any sort of application or anything non-today screen.
and mapping this buttom also maps the keyboard ok, so now i'm suddenly without a keyboard ok button
What exactly is this Side Ok Button for anyways? It doesnt act as a confirm button
I would also like to remap the OK button to rotate screen. When I am using Garmin I like to have it rotated for cradle and visual purposes.
Also, don't know if anyone ever noticed this. I have polarized sunglasses, and when my phone is facing up and down like in portrait mode it is not as bright as it could be, but i rotate it like it is in landscape mode and I can see perfect with them on. Weird!
Let me know if this doesn't work out. I wrote apps for the Universal once to assign to any key. But that was a long time ago. I'm sure better solutions exist now.
V
You can do it for sure with SPB Pocket Plus & the Shortcut Add-in/Plugin.
I actually made an action sender for this purpose, for another button, but if I get some time , I'll pull out my old work & look.
But SPB PP does allow it for sure. You can map two of anything to that button, one for press & one for press & hold.
Anything new on this?
I've tried some different things...still nothing.
another bump...
bump it up again...anyone know how to remap the OK button (forget the rotate screen)?
Anyone know of a software that will enable the user to "wake" up from sleep mode by just touching the screen?
closet410 said:
Anyone know of a software that will enable the user to "wake" up from sleep mode by just touching the screen?
Click to expand...
Click to collapse
wow someone is lazy. haha. whats wrong with touching the power button?
If you could touch the screen and it would awake from sleep mode putting the device in your pocket would suck ass because 1) you'd be draining the battery quicker than it already drains and 2) if you didn't lock your phone you'd be dialing numbers, starting applications, or turning the volume on. Now, wouldn't it be embarrassing that you were in a meeting and the "Eye of the Tiger" started playing because someone is called you?
oh don't deny the fact that you considered putting a Rocky theme song as your ringtone to motivate yourself each day.
lol
BUT if i had s2u2 then i wouldnt have to worry about that. i love slide to unlock but i see no point in having it if i have to press the power button to wake up the phone AND slide to unlock it.
I've been in search of such progam for a while now and i still can't find one. It was great on my HP Jornada 567 how i can do it, but not with the Tilt
closet410 said:
BUT if i had s2u2 then i wouldnt have to worry about that. i love slide to unlock but i see no point in having it if i have to press the power button to wake up the phone AND slide to unlock it.
Click to expand...
Click to collapse
you make a valid argument. However, you still have to consider battery drain with the device in your pocket the backlight would always be on. I like s2u2 as well but it tends to slow the device down considerably, therefore, i stopped utilizing the application.
Good luck on your searching and please report back to this thread if you do find the software you are looking for.
I am just plain too lazy to hit the power button. Could someone make a slide-to- unlock that is active with the screen backlight off?
bdkvxd said:
I am just plain too lazy to hit the power button. Could someone make a slide-to- unlock that is active with the screen backlight off?
Click to expand...
Click to collapse
Try settings-system-key lock-do not lock buttons. Then you can wake up yor phone by pressing any button except the d-pad and center button
emilceteras said:
Try settings-system-key lock-do not lock buttons. Then you can wake up yor phone by pressing any button except the d-pad and center button
Click to expand...
Click to collapse
Awesome, that works great. Even easier then sliding the phone open a little. Thanks!
s2u2
s2u2 can wake device with any button if you set it in options. you can also map some button to activate s2u2, so you don't need to press power button
antihrist said:
s2u2 can wake device with any button if you set it in options. you can also map some button to activate s2u2, so you don't need to press power button
Click to expand...
Click to collapse
hey, this is interesting for me.
Do you mean that by S2U2 I could map another button to perform Sleep function? I am looking for to map On/Off button to the button #6. I would to sleep my tytn through that button.
any help?
thanks
fausto
I use S2U2, have it mapped to my PTT+hold button. Then settings->system->key lock, set it to lock buttons if device is locked. I usually wake it now by flipping the scroll wheel, then slide to unlock it.
I only use the power button to actually power off or on.
gwnorth said:
I use S2U2, have it mapped to my PTT+hold button. Then settings->system->key lock, set it to lock buttons if device is locked. I usually wake it now by flipping the scroll wheel, then slide to unlock it.
I only use the power button to actually power off or on.
Click to expand...
Click to collapse
thanks gwnorth, this is very usefull and interesting and I will use for the moment, but this is not yet exactly what I am looking for. What I wanna do is to assign to the ptt button the same functions now assigned to the on/off button, I am shure that there is a command to launch and perform sleep or resume when a button is pressed.
btw, thanks again for the suggestion, it is very appreciated.
ciao
fausto
you should just set all the options you want in s2u2, and then just assign button#6 to s2u2. right now i'm trying to assign long push of end button to s2u2. you can find something about remaping keys here http://forum.xda-developers.com/showthread.php?t=356322&highlight=remap
antihrist said:
you should just set all the options you want in s2u2, and then just assign button#6 to s2u2. right now i'm trying to assign long push of end button to s2u2. you can find something about remaping keys here http://forum.xda-developers.com/showthread.php?t=356322&highlight=remap
Click to expand...
Click to collapse
wow, very interesting and usefull thread!!!! This will be very usefull to customize my tytn. So by some links in the windows folder we can perform any program but......which is the command that get Tytn into sleep? and which command gets it resumed?
I am sure, thanks to everibody, I am very close to the solution now...
ciao
fausto
i can't help you with that. just join the above thread, there might be someone who would know the answer to your questions.
antihrist said:
i can't help you with that. just join the above thread, there might be someone who would know the answer to your questions.
Click to expand...
Click to collapse
thanks anti,
I have just installed PHM Keys and it does about 50% of my need. Now when I push the Ptt button it goes in suspend mode. To resume I can use the On/Off button or if i prefer any other button.
thanks,
fausto
I think having the trackball function as the home button would be a feature many would like to have. Any developer out there willing to take on this function?
What would be the point of the actual home button then? This seems pointless
what would be more useful is if the trackball can be programmed for stuff then we can use it to launch apps and do all sorts of things.
PhantomRampage said:
What would be the point of the actual home button then? This seems pointless
Click to expand...
Click to collapse
I have 3 things for my home button now, Quickdesk on dubbletap, recent apps on hold in, and singletap for launcher pro. for me it would be awesome to have quicker access to the recent apps, by putting the home to the trackball. and have recent apps on single click. wouldnt hurt to have the option. and it should also be available to bind the trackball click to anything u like.
I agree, or trackball to answer a call, I don't use the trackball that much.
Creating a service to run in the background wouldn't be too hard to do. The only problem is that you wouldn't be able to use your trackball to select links in the browser, for example. Good in theory, wouldn't work great in practise i don't think.
Here are the reasons why this would be a great function, and how it should go down:
The capacitive home button is not as responsive as it should be. I think we all use it A LOT, so making sure it worked perfectly everytime would be awesome. Especially when accessing "recent apps" and long pressing the home button, the capacitive button will occasionally take you home before you see your recent apps.
Double tapping can be incorporated into the home button. With the capacitive button, double tapping it has an almost 50% chance of failure. The trackball home button would fix this.
I don't know about you guys, but I usually dont use the trackball to select things on the screen. Touching it is so much easier. The trackball would be much more usefull for notifications, scrolling, and as a home button.
I agree with a previous poster, the trackball should be given to option to route to anywhere the user would like it to... Though I don't know what else there is to route to...
The ACTUAL home button can also be routed to anything the user would like. Maybe to recent apps, changing of brightness, a favorite app, an alternate launcher... ANYTHING.
This is all hypothetical of course, and as a non-dev, I actually have no clue how hard or easy this would be to create.
But what do you guys think? I know this a feature that would be really useful to me at least, and sound like some other people too.
sorry, there was a double post due to the server upgrades/issues on XDA.
Sorry to revive an ancient thread.
My N1 had a broken trackball, and in the process of replacing it i managed to kill both my home button and my seach button.
I can live without the seach, but not without the home.
Is there any progress on this topic ?
tia
John_duh said:
Sorry to revive an ancient thread.
My N1 had a broken trackball, and in the process of replacing it i managed to kill both my home button and my seach button.
I can live without the seach, but not without the home.
Is there any progress on this topic ?
tia
Click to expand...
Click to collapse
Never mind, it was a software problem caused by an incomplete flash. (wiped everything separately, but that wasn't sufficient. Returning to factory settings did the trick)
All I want is trackball to blink beautifully for me!
That's all, baby.
+1
I would also like trackball mods such as
double tap to go to an app and other tap patterns for the trackball