HI everybody!
I have a important question!
If your phone is locked after idle time (like mine) because of Exchange policy... Phone says when I start writing locking code that emergency calls are available... but how?????
F.e if I am an accident and unconscious and somebody is coming to that place without phone... How he/she could make an emergency call with my phone?
I've tried it when my phone is locked & didn't find a solution?
maybe 911 are unlocked still?
God dammit
So simple... THX!!
just write 112 (finland) and it says you can make emergency call (or 911)
Related
Don't know if this is Kaiser only, but since I'ts a kaiser thats giving me grief here goes...
We're using a mobile switchboard and as part of the group answering our main phonenumber I'd really like to be able to transfer calls with my Kaiser...
Normal phones (as in my last Nokia E61i as well as my N95) gives me the options to park the current call, dial my colleague and then "transfer".. I can't find this option on my Kaiser..
Is this option not available in WM6 or is it HTC that has "removed" it? Or perhaps, is there a thirdparty software to help me with it
Go to Start / Settings / Phone / Services / Call Forwarding.
I'm talking about call transferring not call forwarding..
Transfer = I answer the call, call another contact & transfer it to him..
Forward = all my calls go to another contact and/or number...
Can I push this up, cause I'm desperatly looking for this function on the kaiser.
Maybe there's some addon or a special key combination to activate call transfer on the htc kaiser?
yep - this is possible but is network dependent.
you need to put the call on HOLD.
call your colleage/2nd party.
CONFERENCE the call (so you and 2 callers can hear each other)
then YOU hang up - they are left connected and chatting (but at the expense of YOUR bill!!!)
Hope this helps you.
firstbuddha said:
yep - this is possible but is network dependent.
you need to put the call on HOLD.
call your colleage/2nd party.
CONFERENCE the call (so you and 2 callers can hear each other)
then YOU hang up - they are left connected and chatting (but at the expense of YOUR bill!!!)
Hope this helps you.
Click to expand...
Click to collapse
Thanks for the answer! I will try this when I'm back in my company.
The costs are no problem because we call each other in the company for free and the call transfer is only needed to redirect customers to the right contact but I think it's a long way round when there could be a simple option in the menu (like hold and conference). Every other mobile I know offers a direct way to do this (either a menu item called transfer or by pressing a number).
firstbuddha said:
you need to put the call on HOLD.
call your colleage/2nd party.
CONFERENCE the call (so you and 2 callers can hear each other)
then YOU hang up - they are left connected and chatting (but at the expense of YOUR bill!!!)
Click to expand...
Click to collapse
Tested it and it doesn't work. It simply quits the complete conference.
Again, maybe there's a special dialer which supports it or some kex combination to press.
I really need this feature!
Solved!
So here's the way it works on wm devices:
Get the first call and put it on hold.
Make the second call and press the number 4 followed by the green phone button.
The second call is now transferred to the first and you are finished.
Great thanks to my phone provider ONE who came up with it!
Nice find! Does not work on my Q-Mobile 1.2 Tilt with AT&T.
I get "cannot conference calls"
I contacted AT&T and they said there is no way to do it.
I did read that if your call comes in using a Google Grand Central number you can transfer it using Grand Central specific codes.
Later, Lew
lewcamino said:
Nice find! Does not work on my Q-Mobile 1.2 Tilt with AT&T.
I get "cannot conference calls"
I contacted AT&T and they said there is no way to do it.
Click to expand...
Click to collapse
Yes, it's a "feature" that your Phone Provider must support in order to use it.
I get "cannot conference calls".
I know for a fact that the same sim when used in my old v v old ericsson r380 world phone allows me to conference multiple people.
but my kaiser (running stock) says the above message.
how can i conference calls? the phone looses part of its utility value if I am unable to use this feature. someone got any tips/ tricks for me?
p.s. i initiate both the calls...
conference call is not the same as call transfer!
You can start a conference as described by firstbuddha a few posts ago in this thread (you just shouldn't hang up if you want to stay in the conference). There's also a menu item for conference call.
If you use my method with pressing 4 and the green phone button you are trying to transfer a call which is only possible when your phone provider allows it.
I posted this on the AT&T board and got no responses so I figured I would try here. I am constantly on call for my job (USAF), and to avoid carrying 2 cells, I forward my "on-call" cell to my personal cell. My old phone (nokia 6682) displayed an icon with incoming calls so I could identify it, allowing me to answer my phone officially. I have noticed on the Tilt that there is no such identifier and was hoping someone could tell me how to enable it if it is hidden somewhere....I hate not knowing if the call is official when I dont recognize the number or its not in my contact list.
Thanksfor the help!
Hello,
I am looking for a tool that can refuse a call (identified by number) and calls back immediatly.
Background: I have a flatrate, so I can callback some people that call me for free.
stopfen said:
Hello,
I am looking for a tool that can refuse a call (identified by number) and calls back immediatly.
Background: I have a flatrate, so I can callback some people that call me for free.
Click to expand...
Click to collapse
"Ignore send send" is too much?
Muuuch to much ;-)
When I could save this problem with a little tool/script, why not?
The computer should work for me.
when i call someone and that someone is on a call with another person, i should get a message saying that the person is on a call so that i'd know that he is busy with another call ..
Would appreciate if anyone can be of help here.
t_assal said:
when i call someone and that someone is on a call with another person, i should get a message saying that the person is on a call so that i'd know that he is busy with another call ..
Would appreciate if anyone can be of help here.
Click to expand...
Click to collapse
Who says that you should receive a notice as to what the other person is doing when you call ?
t_assal said:
when i call someone and that someone is on a call with another person, i should get a message saying that the person is on a call so that i'd know that he is busy with another call ..
Would appreciate if anyone can be of help here.
Click to expand...
Click to collapse
yes, but that doesn't have nothing to do with your phone. It's a provider's (vendor/operator) service. And only some of them support it
Actually @t_assal is correct, he meant if I call a guy who is calling someone else and this guy is activated the call waiting function, I have to get a message "waiting" and then you decide to continue disturbing him or to hang up.
Also @papo is correct that his is an operator thing.
But the problem that the operator send me back this waiting signal, and neither my iPhone nor my Nexus one shows this message, but my 10 years old Nokia show it. the same sim card used in the three phones for this test.
Which means the waiting signal which sent by the operator "maybe only Mr. t_assal's and mine" is not recognized by neither iPhone nor nexus1 (also winmo)
We need a solution
nightcap79 said:
Actually @t_assal is correct, he meant if I call a guy who is calling someone else and this guy is activated the call waiting function, I have to get a message "waiting" and the you decide to continue disturbing him or to hang up.
Also @papo is correct that his is an operator thing.
But the problem that the operator send me back this waiting signal, and neither my iPhone nor my Nexus one shows this message, but my 10 years old Nokia show it. the same sim card used in the three phones for this test.
Which means the waiting signal which sent by the operator (maybe only mine and t_assal's) is not recognized by iPhone nor nexus 1.
We need a solution
Click to expand...
Click to collapse
we need to make clear about this. Just to make post short and spare my brain waves, I supposed (wrongly?) he messed it up and is referring to sms which called party get after finish his call.
That's the service I've wrote about.
It's handy if you are off, turn phone on and receive message from Bob, but it's automated and saying he tried to call and you can hit call back btn. In some countries/operators it's common.
Why would I want a message saying Bill is busy on call, 5 secs after I hear beep beep from the line? But yes that would be phone function and it's possible to handle. It's a network message, nokia is showing them by default (and can't be turned off!!!! :-S )
Make an application showing message such as this is possible and there could be one. Just what the purpose?
Though there is one useful info there. After active call ends, phone will receive network message containing code, which describes reason of ended call: red button by called, caller, lost reception (out of coverage or battery), network error, network busy
If you often make people angry over line and they hang on you, with this cell code you can have an monthly statistic of upset people or whatever you want. aah just cant see any reason to have this eather
run windows\fieldtest.exe and check it there, that's good enough.
sorry to hear ppl who thinks they know it all and says bull****..
The fact is clear, whe u call some one who has HIS call waiting service active UR phone MUST indicate U the other person call status. that's what call waiting means. usually "call on waiting.." or something, but STILL ringing and the othrer person hears some indicator beep or someting , and HE desides to take the call or not.
the bug is Iphone 3gs, 4g (and nexus aparently) don't show this message "call waiting" like ALL other phones, in my case, OMNIA II, nokia, (with the same SIM card) shows the msg.
please don't coment if u dont know and PLEASE lowercase and regular font. NOOBS.
sorry for my bad english.
sorry to hear ppl who thinks they know it all and says bullSt.. the fact is clear, whe u call some one who has HIS call waiting service active UR phone MUST indicate U the other person call status. thas what call waiting means. usually "call on waiting.." or something, but STILL ringing and the othrer person listen some indicator beep or someting and he desides to take the call or not.
the bug is Iphone 3gs, 4g (and nexus) don't show this message "call waiting" like ALL other phones, in my case, OMNIA II, (with the same SIM card) shows the msg.
please don't coment if u dont know and PLEASE lowercase and regular font. NOOBS.
satanm said:
sorry to hear ppl who thinks they know it all and says bullSt.. the fact is clear, whe u call some one who has HIS call waiting service active UR phone MUST indicate U the other person call status. thas what call waiting means. usually "call on waiting.." or something, but STILL ringing and the othrer person listen some indicator beep or someting and he desides to take the call or not.
the bug is Iphone 3gs, 4g (and nexus) don't show this message "call waiting" like ALL other phones, in my case, OMNIA II, (with the same SIM card) shows the msg.
please don't coment if u dont know and PLEASE lowercase and regular font. NOOBS.
Click to expand...
Click to collapse
Who's the noob? You double posted and no this isn't a fact, I've never had a phone tell me when someone is on a call. There are some carriers that have a tone at the end of the ring to let you know they are on another call..
I think you are confusing your words, your phone should alert you (the person getting the call) that someone is calling you while on another line, it's not the other way..
Provide some info stating other wise that isn't half ass typed like the **** you are posting.
Yes it's true I had this problem since i started using PDA phones only (HTC Mda compact, then HTC Tytn 2 and the HTC HD2), I think problem only exists when using PDA phones because ''call waiting'' function is working on my all other symbian phones like (Samsung, Nokia, .... with symbian)
It might be with Windows mobile phones not sure, but don't know if there is any fixing for this specially for HTC HD2 ..
thanks
Does anyone know if this is possible?
I don't think that this is possible, but why would want to remove that anyways?
It would be really useful in an emergency if someone else picked up your phone to call 911... ;-)
I think it is not possible to remove the emergency call from the lock screen as well. I believe it would be helpful for us to have it. You can immediately call for any emergency assistance.
sounds like an iphone problem, trying to unlock without having a at&t sim card