HI,
Is any opportunity to extend the Kaiser with TMC capability?
Yes, buy an external GPS device mit TMC capabilities...
Hello,
At the time, I bought a GNS TMC receiver for my Mio P550. For more info about the GNS TMC receiver, please have a look at http://www.gns-gmbh.com/catalog/product_info.php?cPath=28&products_id=117.
Since this receiver has a mini-usb connection I'm wondering if it could work on my Tytn II. I found that it does charge my Tytn, the only question is how to get TMC working on my device. Does anybody know this? Can anybody help? Does anyone have some suggestions to try?
The software I'm working with is MioMap v3.2 or Route 66 navigate 7. This used to work on my mio p550, off course i prefer it on my Tytn II
Thanks for all help!!
Dennis
A response from GNS:
"thank you for your inquiry. Sorry the PDA HTC Tytn II has only a USB-Client connector. in this case the HTC Tytn II can´t use TMC-receiver with cable."
Is this true; don't they react like this to palm me off?
tnx
Hi everyone,
Does anyone tried to use TMC under Igo 8 ? My diamond says it can't find the TMC hardware. I tried to play FM Radios and it works.
Anyone can help ?
Thanks by advance
Very good question.
I had the same issue myself, yesterday...
HastaSSSS
Diamond doesnt have TMC does it?
someone1234 said:
Diamond doesnt have TMC does it?
Click to expand...
Click to collapse
Nope. Unfortunately, it doesn't. Oh, well...
Oh, i thought it had throught the FM Radio receiver
Does anyone know a bluetooth TMC receiver for use with igo 8 and htc diamond ?
rrichie said:
Oh, i thought it had throught the FM Radio receiver
Click to expand...
Click to collapse
It has an FM receiver with RDS decoder but not the TMC hardware. I have tried to but the radio on and then starting IGO and searching for the TMC receiver but it doesn't find one. So no possibility for it.
Thanks marco 899.
Does you have any suggestion about a good bluetooth TMC receiver i could use with igo 8 and htc diamond ?
Bah! That seems a bit stupid. If its got a GPS unit and an FM radio they might as well include the TMC bit as well. Or they could have at least used a GPS chipset that includes the TMC stuff.
leaskovski said:
Bah! That seems a bit stupid. If its got a GPS unit and an FM radio they might as well include the TMC bit as well. Or they could have at least used a GPS chipset that includes the TMC stuff.
Click to expand...
Click to collapse
It's all about licenses. TMC needs a license from GNS. That's why leadtek stopped producing gps receivers with builtin TMC.
I only put my original head phone on usb port and I found a TMC with diamond via IGO's automatic finder. It's fine but the reception of TMC's chanels doesnt work. I think that it is possible to do a bridge between FM radios ...
marco899 said:
It has an FM receiver with RDS decoder but not the TMC hardware. I have tried to but the radio on and then starting IGO and searching for the TMC receiver but it doesn't find one. So no possibility for it.
Click to expand...
Click to collapse
There is no need for TMC Hardware. TMC is done by some special RDS-Messages. Diamond is able to receive RDS 'cause it will show up the name of current station. So it will receive RDS-TMC, too.
You only need a software that will get the tmc messages and decode them to, lets say, opentmc and that's all.
are there some examples for an openTMC software?
If it turns out that waiting for the software TMC support takes too long I have an alternative proposal:
- it would be possible to buy a TMC receiver for a mere ~$100 and
- log the TMC messages in country. All of them.
- start a website
- write a program that periodically downloads the content of the website via 3G
- and feed a COM port that Igo or other navigation programs can read.
As far as I know (please correct me if you know an existing solution) there is no such site online.
How does it sound?
i have read this thread for Diamond and then i have found this other thread for Blackstone http://forum.xda-developers.com/showthread.php?t=511838
it can help us??? it's possible to try this blackstone method on our Diamond...
thanks for answer
dibbutz said:
i have read this thread for Diamond and then i have found this other thread for Blackstone http://forum.xda-developers.com/showthread.php?t=511838
it can help us??? it's possible to try this blackstone method on our Diamond...
thanks for answer
Click to expand...
Click to collapse
Thanks dibbutz for bringing this to my attention.
It does work on the Touch Diamond, better than the TMC on the £1,000 Garmin in my Volvo.
There are three things that you ought to be aware of.
1) You need the headphones plugged in to act as a aerial.
2) It only works with a good signal, don’t expect it to work indoors without fiddling with the aerial.
3) The HyperGPS program remains working even when the program is closed. The only way to unload it is to do a soft reset. (Could have battery implications).
Internal TMC on Diamond is possible !!!
Look here: http://forum.xda-developers.com/showthread.php?t=512630
It works !
Does anyone have RDS-TMC working on the Diamond2. I'm looking for a simple solution like using an USB TMC receiver.
use search !!!
http://forum.xda-developers.com/showthread.php?t=512630
peter van lis said:
use search !!!
http://forum.xda-developers.com/showthread.php?t=512630
Click to expand...
Click to collapse
I am looking for a solution without having to use the USB headphone. This is very inconvenient in the car on a cradle....
erikcornelisse said:
This is very inconvenient in the car on a cradle....
Click to expand...
Click to collapse
would a usb tmc reciever not be the same ? u can't plug it in if it is in the cradle
peter van lis said:
would a usb tmc reciever not be the same ? u can't plug it in if it is in the cradle
Click to expand...
Click to collapse
You can get TMC receivers which fit between power and cradle. (see http://www.gns-gmbh.com/index.php?id=85&L=1 for example)
I found a working solution for using TMC on the Diamond2. I use a Bleutooth TMC receiver (GNS TrafficBoxPlus FM9 BT-Y) which I build in the car. This works great with IGO8 and the Diamond2. Finally a simple good working solution.
Hi,
Does anybody know about a working bluetooth TMC-receiver for Leo? I need only TMC but I'm not really sure what I should buy. Maybe anybody of you has a working one - please tell me which one.
Big THX in advance!
de Wolfe said:
Hi,
Does anybody know about a working bluetooth TMC-receiver for Leo? I need only TMC but I'm not really sure what I should buy. Maybe anybody of you has a working one - please tell me which one.
Big THX in advance!
Click to expand...
Click to collapse
HI, it´s possible to use the inside radio to recive tmc signal. But only with the cableheadset.
Is it already possible also with HD2? Last time I tried (3 days ago) hyperGPS was not suitable for HD2.
No, it is not yet possible to do so... I am waiting for this too...
De Wolfe: check gns-gmbh.com/index.php?id=80
GNS TrafficBox Plus FM9BT-C or its identical clone Navilock NL-324BTR (comes a little cheaper). Tested with HD2 + Navigon 7.3.6 and 7.4.0 PDA.
No HyperGPS/proprietary TMC yet.
I've tried Hypergps with my HD2 with no success
The starnge think is that Igo8 discovered TMC when Hypergps was set to port com 7 and GNS protocol. Unfortunately there was no way for me to set the correct FM frequency for RDS
TMC working with external BT GPS/TMC receivers
I got my new HTC HD2 a week ago. Igo8 runs exceptionally fast. I wanted to still use TMC data as well as I have paid for it (naviextras) and am used to it on my Pocket PC's (ipaq 3970, 5450, 5550 and 4700). I tried the HyperGPS route with the headset lead (you definitely need to plug a lead in to act as FM aerial). The only way I get TMC information working is to use either the GNS BT GPS/TMC receiver (GNS5843) or the Royaltek (RTG1001). I can either use internal GPS of HD2 (port 4 baud rate 57600) and get TMC from the BT GPS on port 2 at baud rate 57600. Port 2 seems to be the only option you get when you add (pair) the BT GPS devices and pick an external GPS port. I intend to generally use the internal GPS, but when in the car and going some distance or in bad weather if necessary will switch on the GNS 5843 go to igo8 setting/TMC pick GNS (protocol) port 2 and baud rate of 57600 (even though the manual says 38400). I get the message TMC Hardware detected and off It goes searching for RDS signals of the FM transmissions and extracts the TMC codes to integrate with your map and route. I have my GPS/TMC device semi permanently in the car (using velcro pads) by the windscreen or sun roof to get a better view of the sky for the satellites and the aerial suckered to the top of the windscreen so as not to have the FM signal blocked by the metal of the car's metal frame. Be aware that if you have a car with the 'athermic' windscreens that this will weaken all radio signals to your device (satellite, mobile & FM/RDS).
I better mention that I am in Northamptonshire in England in UK. You need to be in area that is covered by TMC carrying radio stations (non BBC), example are Classic FM and leicester sound, Heart FM, etc. etc..
Dear Mr de Wolfe
I use the "GNS TrafficBox FM9BT-C - Bluetooth TMC / TMCPro Empfänger mit KFZ zu USB Adapter" wich is a bloetooth tmc-module built in a car-charger.
It works pretty good, signal is ok with the short antenna and is very good with the cable-antenna. The charger is strong enough for the HD2 (wich is mentioned as problem in the comments of the website)
I got it from here: "http://www.pdamax.de/?art_nr=gn-003"
Greetings from Bavaria
esociarius
I can confirm the gns 5843 working. but i do have, after activating bluetooth, to connect the com2 manually. only activating bluetooth does not do the trick. the gns unit is paired but com2 does not connect. so igo does not find the tmc signal.
after manually connecting com 2 it works like a charm.
little annoyance and would like to find solution for it. if anyone knows.
example of sys.txt tmc setting for HTC HD2
I think you can get around this by adding some text to the sys.txt file under title of TMC and you state com port. Port 2 in our case.
[tmc]
port="" - comma separated port name and port number pairs for ex. "COM,1,COM,2,COM,3"
source="" - if it is not specified then the program tries to autodetect or the possible strings are
gns
royaltek
amaryllo
samsung
opentmc1
opentmc2
ngalik
eten
harman
gps_source= - 0 if the GPS and TMC receivers communicate on different ports, 1 if they share one port (for ex. GNS 5843 or Royaltek RTG1001)
But then it will always look for the BT GPS unit. Personally I prefer to switch the TMC section on only if I think I need to when in the car on a longer journey. So I use HD2's internal GPS (port 4) and external TMC (port 2 from GNS5843) Like I went to London on Friday (100miles away). Only in the centre of Canary wharf did the signal become confused. This would be because of the tall, close, glass and steel buildings making multipath GPS signals and only a small and narrow view of the sky immediately above. That is the situation when you put your BT GPS receiver at the sunroof glass looking straight up at sky instead of forward at the buildings blocking the signals from orbit.
Were you using your GNS GPS/TMC device for both signals or just the TMC? The above should cure your problem if you only use the GPS/TMC BT device on port 2.
I am using the internal GPS and bluetooth only for TMC. never had a prolem with lack of sattelite signal of the internal GPS in my car, so have no reason to use it other way.
I agree that the internal GPS receiver in the HD2 is very very powerful (sensitive). I get all 12 windows full of GPS signal even in the middle of my house and accuracy listed as 'high'. But I was just giving an insight to the worse case scenario I had the other day was in the middle of Canary Wharf because of the tall buildings . it would be the only place in the UK with the worst conditions for satellite reception.
The ideal and cheapest solution, for everyone, will be the solution for HyperGPS to work on HD2 with the 3.5mm aerial/headset lead plugged in. I even get a good FM signal through the 3.5mm to 3.5mm lead to connect HD2 to the audio input to the car system. If someone gets or sees the HyperGPS working on the HD2 for igo8 do please let us know. Thanks! in advance.
P.S. by the way ....where is this web site based? I just put this on at 1856 yet it displays at 0656. This site would therefore be ½ way around the world...... Ah! I just noticed there is the pm after it.
Just got my Navilock NL-324BTR. Paid just over £50 from Amazon.de. All is working well. The only niggle I have is that when iGO8 opens, it asks me to confirm the port that I want to use. If I do not select the port then hit "select" in time, the option screen disappears and it does not start.
Anyone any solutions?
To get that screen back you either just tap the BT button to get to that screen again or minimize Igo8 and tap start then Bluetooth then select your device. (I have moved the BT icon to the top (tap and hold) of the HD2 screen.
tomtom
Does anyone know whether there are any workarounds to use any of these tmc receivers with tomtom on the hd2. If not, can someone who used both tomtom and recent Igo give a short pros and cons of the two? I used Igo about 3-4 years ago and I did not like it plus I became used to tomtom.
what is reception quality of gns trafficbox tmc receiver?
Hi,
i am topaz (HTC touch diamond 2) owner and can use hypergps, however i find fm reception of topaz builtin tuner quite poor for tmc needs. In my citroen c5 (worst car for all sort of signals due to its athermic windscreen), tmc reception is poor. I have experimented with various antennas connected to extusb connector, however no real success.
I tried to get magnetic mount fm antena for car roof, but there isnt any available?!
Out of desperation i am now conisdering GNS traffic box (to many $$$...). As i understand there are two versions: lighter plug and external antenna version (both BT). I would buy one of these, and lighter plug seems practical, however i am afraid, that it would have poor recepetion due to athermic windscreen.
tomi
Hi tomi,
I have the GNS for the lighter-plug. The reception in my car (Ford Mondeo) is excellent with the long antenna and not bad with the short antenna - but in your case: I would buy the internal module, which is connected to the antenna of the car-radio, though you cannot take it out of your car.
Best regards
esociarius
Hi mihaid,
I have Tomtom on my second device, but I think there is no possibility to connect a tmc-module to tomtom - they want to sell their own tmc over internet-connection. This was one of the reasons, why I went back to Navigon, which works great on the hd2 (though the Navigon-support is poor).
Best regards
esociarius
For those with athermic front windscreens, place your BT GPS or TMC devices on the rear parcel shelf or attach to a sun/moon roof if you have one. An alternative position if you are a bit DIY is to place under the plastic in the aquarium between the bonnet and windscreen (usually has the windscreen wiper parts there too, needs power and insulation/ water proofing provided) tuck aerial along windscreen rubber).