I've been playing with my Kaiser and these are the last remaining bugs that I can't figure out:
1. No Data while using Voice. See thread in this forum for other's complaints.
2. Phone does not wakeup when a email is received. I tried following other's advice by installing Spb time, and enabling "Wakeup Tweak" and this had no effect. Phone plays notification sound, but still is sleep.
3. Phone locks keys and sleeps while talking. On my 8125 with WM5, the phone would turn off the display, but would wake up with any key press while in the call. This is kind of handy in case I want to see another call come in, go to speaker phone, mute, etc. Right now, I need to hit the power button.
4. Menu's in messaging are really annoying. It would be wonderful if there was a way to modify the menu's in messaging. In SMS/MMS the New Menu Item is actually another menu where the first item is "Multimedia message". There are other things I find annoying.
Other than these annoyances, I think the phone is really doing great.
mswanson said:
I've been playing with my Kaiser and these are the last remaining bugs that I can't figure out:
1. No Data while using Voice. See thread in this forum for other's complaints.
You may not have 3g in your area, or your provider requires UMTS which you
can enabled by installing the Kaiser Tweak program.
2. Phone does not wakeup when a email is received. I tried following other's advice by installing Spb time, and enabling "Wakeup Tweak" and this had no effect. Phone plays notification sound, but still is sleep.
I like this effect since it doesn't waste battery. I'm not sure how to fix this one
3. Phone locks keys and sleeps while talking. On my 8125 with WM5, the phone would turn off the display, but would wake up with any key press while in the call. This is kind of handy in case I want to see another call come in, go to speaker phone, mute, etc. Right now, I need to hit the power button.
Turn off fast sleep, use kaiser tweak to disable.
4. Menu's in messaging are really annoying. It would be wonderful if there was a way to modify the menu's in messaging. In SMS/MMS the New Menu Item is actually another menu where the first item is "Multimedia message". There are other things I find annoying.
your on your own
Click to expand...
Click to collapse
1. I guess from what others are saying you have to be in the HSPDA area.
2. I guess I never realized it but mine doesn't either, be nice if it were an option but I don't know if it is.
3. These are reg settings, install the reg tweaks sticky above
4. I don't quite understand what you looking for or what is the problem.
Thanks for the reply exstatica.
I have kaiser tweak installed.
For #1, which option is this exactly, I'm not seeing what option you explain.
For #3, I have "Fast Screen Off" = Disabled (Advised)
jallenclark,
If you go into Messaging and then your Outlook E-Mail account, you will notice the Menu has "MMS Options" as the last item in the menu. On 8525, WM6, "Send/Receive" was the last option. It was nice that this was the last item. Why "MMS Option" need to be on the Email account, I have no idea.
If you go into Messaging and then you MMS/SMS account, the Menu Has a New Menu Item, then two sub-items. This isn't out it use to be.
I wish there was a way to modify these items.
I think it is near the top of the tweak program, it is called Fast Sleep.
I see what you mean about the Send/Receive and I agree completely. I am sure it would be possible to switch the order of the buttons but I don't know how to program it. I went from 8125 and it was similar to this the send/recieve was 3 up on the list.
I had 0.3 of KaiserTweak, current version 0.4 has the option you were talking about. Duh moment on my part
The Kaiser has voice and data at the same time as long as you are in a 3g area.
I can stream live TV from my media center pc using webguide4 and as long as the icon shows the "H" symbol for HSDPA then I can make and recieve calls while the video streams. The audio on the video is muted until I hang up the phone but the video is still playing non the less. If I do not have the "H" icon then this will not work.
This is not a problem with the phone it is the way the technology works. Be thankful, this is only with GSM providers. Meaning that this is not even an option with the best service area with Sprint and Verizon.
I get over 100 emails a day in my line of job, if the "feature" you describe existed (wake up on email) the first thing I'd look for is how to turn it off... My Hermes did the same BTW, you hear the sound, but the units remains in standby mode.
mswanson said:
4. Menu's in messaging are really annoying. It would be wonderful if there was a way to modify the menu's in messaging. In SMS/MMS the New Menu Item is actually another menu where the first item is "Multimedia message". There are other things I find annoying.
.
Click to expand...
Click to collapse
Not quite sure what you mean but if you are wanting a send a sms you can always set one of the softkeys to "New SMS" meaning you only need to click one button to compose a sms.
mswanson said:
I've been playing with my Kaiser and these are the last remaining bugs that I can't figure out:
3. Phone locks keys and sleeps while talking. On my 8125 with WM5, the phone would turn off the display, but would wake up with any key press while in the call. This is kind of handy in case I want to see another call come in, go to speaker phone, mute, etc. Right now, I need to hit the power button.
Other than these annoyances, I think the phone is really doing great.
Click to expand...
Click to collapse
1 click on the side wheel and it is back when you need it I love this system..
fast sleep makes my tilt (kaiser, 8925, varioIII) respond incorrectly.
fast sleep is a good idea conceptually but while it saves battery power, when i wake up my phone in call or after the call is over, It makes most of the home screen and the soft buttons unresponsive. I can usually fix this by putting it to sleep and waking it up one more time. Sometimes when this happens the backlight comes on only very dim. I dont see a setting for the fast sleep while in a call. Here are some steps i have tried to resolve this issue.
tried to remove all items from home screen
chose to not show owner info or notes when turning on device.
Changed power settings to not turn off device.
changed backlight to always stay on for testing.
told the device to not lock after no usage.
problem existed before i unlocked the device.
Any Ideas?
to answer some questions i can see headed my way here is the info on my kaiser.
provider ATT TILT (unlocked)
rom version: 1.57.502.2
radio version 1.27.12.11
protocol version 22.45.88.07H
4gb sandisk microsd HC
installed apps:
TomTom Navigator 6 with US Maps
C. Ghisler & Co. Total Commander
Caywen Kevtris 2
3dtracking free tracking
Macromedia Flash Player ActiveX
MochaVNC
PocketCM Keyboard 0.10
Ateksoft Webcamera plus
tcpmp the core pocket media player
geekstoolbox.com siriusWM5
googlemaps
cingular pre_midlets
OZ communications OZ IM
peekpocket
BTAudioToggle
deathdrive
WM5 windows media codecs for WM6
I love my phone. Touchflo is working but tricky at times. I cant wait till the cube becomes solid. I havent tried any other roms yet.
some of the cabs i am using
attached are the exact cabs i used to install some of the apps.
I'm still annoyed that unlocking the phone (as in, unlock when it comes out of suspend with a pin, not sim unlocking) requires you to hit UNLOCK when you type in the pin, instead of the old way where the phone unlocks when you hit the last digit.
I'd still love some way to change it back.
Kaisertweak Works!!!
kaisertweak rocks. It disabled fastsleep which makes my problem not happen. I attached it.
2 issues
Is it just me or is the Tytn II's speaker behaves differently to the original Tytn and D810?
1. Go to the phone keypad, try dial a string of number quickly, the speaker will start to pop as it can not play the key sound fast enough.. This has never been a problem with my 838 Pro or D810.
2. Make the Tytn II to play a sound, after it finishes listen carefully for a noise that appears to be the speaker turning off, it seems like after a sound is played the speaker's power is continuously on for a few seconds before switching off. Again this is different and unnoticeable on the 838 Pro or D810.
happens to me too.
123thisisme said:
Is it just me or is the Tytn II's speaker behaves differently to the original Tytn and D810?
1. Go to the phone keypad, try dial a string of number quickly, the speaker will start to pop as it can not play the key sound fast enough.. This has never been a problem with my 838 Pro or D810.
2. Make the Tytn II to play a sound, after it finishes listen carefully for a noise that appears to be the speaker turning off, it seems like after a sound is played the speaker's power is continuously on for a few seconds before switching off. Again this is different and unnoticeable on the 838 Pro or D810.
Click to expand...
Click to collapse
I get the popping. It sounds like its making the speaker clip. I didnt get it until i changed to a cooked rom. IMHO, all cooked roms have bugs....but i would gladly settle for all of the worst bugs in the cooked roms over using the att tilt rom which was loaded with bloatware, fastsleep, proxy, crappy camera, crappy softkeyboard, etc.. etc.. etc... I really dont think its the speaker. I think its the rom. Backup and try a different one if you feel like testing.
Thanks,
-J
Hey everyone
Has anyone else noticed that their TyTN II wakes from standby when switching between GPRS and 3G. At least I think this is why mine appears to wake up randomly! It will be sat on my desk in standby mode and then the screen will switch on and the signal strength bars will move.
I've checked to make sure nothing is running in the background and performed a soft reboot.
Any ideas?
Hi
The Kaiser does turn on at least once every hour (some house keeping tasks), and will turn on if the mobile signal is lost. However these on's are in unattended mode which means the device appears off to the owner so the screen will not come on.
If you have some software that likes to do work or updates the today page for example, that software may be detecting the device has turned on and in order to get your attention or just through bad programming, issues a power announcement to say turn on proper, hence the display lights up!
Regards
Phil
Thanks for the info, I'll have a look what I have on there and try and isolate what is causing the power ups.
Cheers for the help.
If you have sprite backup installed with the auto backup on low power option that causes occasional power ups to enable the power check.
I may have solved this issue. After uninstalling enAlarm the phone, no longer appears to be waking. I'm still monitoring it though
i have the same problem when im signed on to AIM. Once i sign off it stops waking up, but if its on it'll wake up every 5 minutes or so, and it is in fact annoying. Havent found out the solution for it yet so i just dont really use it that often
nando223 said:
i have the same problem when im signed on to AIM. Once i sign off it stops waking up, but if its on it'll wake up every 5 minutes or so, and it is in fact annoying. Havent found out the solution for it yet so i just dont really use it that often
Click to expand...
Click to collapse
it's when a friend log's in or out of AIM.. it's a paint, rediculious and ATT refuses to get rid of OZ messanger and use a real one.
here's the kicker. it supposed to use TEXT , but when a friend logs in or out, the message is sent to your phone, and then DATA brings up the list..
STUPID and ignorant of ATT but,. big companies do what they want!
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the Tilt):
http://forum.xda-developers.com/showthread.php?t=335433
Hi guys
I have noticed something weird. My phone won't ring when the screen is locked, in fact, it doesn't show the incoming call screen or anything. Eventually, I am told that "the cell phone I am trying to ring is either turned of or outside the cell phone network" by a pre-recorded message. I am running 2.1 black Quarx.
Its very strange, if the phone is unlocked and I ring it then it rings and everything is fine. If I ring it while its locked, then unlock it, then sometimes after 10 seconds it might ring eventually.
Has anybody got any idea about what is going on?
Actually, its a little more complicated as I have found out while been playing around a bit today. If I leave it for say more than 10 minutes, it won't ring. If I leave it alone for 10 minutes, then ring and let the phone ring for a minute my cell won't ring. If I hit the home button which wakes the screen up, the phone will - after a 2 or 3 seconds delay - show the incoming call screen and start ringing! It doesn't seem to matter if its plugged in or not, in fact, I can run "adb catlog" while ringing! Nothing in the logs seem to hiont at what the issue is.
I used to get something similar to what you are experiencing but somehow along the way the problems just stopped. I think its because I've flashed my phone so many times. Just reflash your phone and see if that helps. If it doesn't then flash to a different 2.1 version
Sent from my GT540 using XDA App
http colon slash slash dub dub dub dot stuff dot co dot nz/business/industries/4327808/Vodafone-customers-miss-calls-after-mystery-3G-fault
It is probably an issue with my cell phone network, rather than my phone! Which is good and bad, because it means I have to wait for those dicks to fix their stuff - I can't fix it myself.
I'm having quite a few issues with my ROM'd Z phone using Paranoid. I've recently updated to the latest version as soon as I was alerted.
1. The lock screen freezes, or rather becomes limited in responsiveness. I use the swipe up to unlock. When I swipe up, the clock/notifications just bounces and eventually the screen goes dark, then off. Sometimes I can reset using the power menu, but often the screen is totally unresponsive so I have to do a hard reset. On occasion I have to reset multiple times consecutively because it locks up immediately after boot... until its finally usable again. https://drive.google.com/open?id=0B7OGcalUJSgHblZob2Q2eHNkLU0
2. The phone gets hot in my pocket. When I notice this, often it has unlocked, turned on GPS, turned on the LED, taken photos and opened apps, or a combination of things. Sometimes even made a phone call, either to a contact or a recent from the log.
3. Recently I noticed it randomly ghost selecting right in front of me. I was unable to unlock and had to hard reset the phone.https://drive.google.com/open?id=0B7OGcalUJSgHVmJhQ0FOUDdLQkE
4. I am not getting SMS alerts from Optus 321 telling me I have messages from when the phone was off, or out of service range. Often I won't know till I randomly check days later, or when I miss a call (while on another call or in service range) and they leave a message.
5. Sound drops in and out from the other party. They can always hear me. Randomly, on some calls. I can have 3 good conversations, then the next I have to call back multiple times before I get enough up time.
5a. When I'm making a call, I may not even hear the outgoing ringing tone.
6. On any new call, the the volume on my Bluetooth headset is usually down about half way. I click the Vol+ and it immediately jumps to full, the volume bar already being at full.
7. When it rings, it often takes a second or more (after the ring tone has started) for the screen to turn on.
On suggestion by a friend, I disabled a lot of notifications, but the lock screen still won't unlock even when the only thing showing is the clock.
I guess there is problems with the the phone hardware, the ROM or incompatibilities with it and an APP.
Is there some diagnostics, or an app that I can run that will log what is going on and I can have someone look at those logs for me?
You should ask in Paranoid Support Thread
http://forum.xda-developers.com/xperia-zl/orig-development/rom-paranoid-android-5-t2992023
Thankyou. I could not find it.
edit: That thread is closed. There is a link at the end for a 'new home', but that thread is under Xperia ZL. Is the ZL considered the same phone?
I'm really sorry.
i gave you a wrong link. Shame on me.
http://forum.xda-developers.com/xperia-z/orig-development/rom-paranoid-android-5-t2976930
This is for yuga/c6603/"Xperia Z"
Verizon S8+ acting up.
Signal stays at 1 bar and jumps to 3 bars back and forth when i try to make a call.
Initially, it will take few seconds before call is made, then call is active and 3 bars are showing.
Constant dropped calls. People cant hear me or vice versa.
Text messages dont go through unless i open the dialer to wake it up ?
Am i waking it up or what ?
Tried network reset.
Tried hard reset.
Tried different sim.
Carrier irrelevent since different sim that has 4 bars on another phone acting exactly the same.
Issue persists.
I observed this behavior in LG V20. Bars go up when making a call but then drop.