Database Develop

Soltuion: When you don't hear Calls

When you don't hear your calls and infact your call is in progress, this occurs normally in the morning when your unit take a nap in the night.
The solution is turn ON your bluetooth and then turn it OFF or just remain it to ON.
This problems occurs frequently who use bluetooth headsets.

I don't use any bluetooth headset and I still have this issue... can't ear anything...
So you say that your solution is valid? Great! I'll give it a try!!

anyone tried?
it works??

!Working! Solution
Remove BTTrayCE.lnk from Windows\StartUp, and the sound problem is solved.
To enable BT again, run Run_BTTrayCE_10.lnk and BT icon will appear.
To disable it again, u have to soft reset the machine.
Cheers,
Senator

THIS WORS FINE. I HAVE THAT SYSTEM WORKING IN MY 9090, FOR 2 MONTHS ALMOST AND THE PROBLEM GONES.
REGARDS

BY THE WAY, I FOUND THIS PROGRAM THAT IS THE SAME OF WINDOWS XP TASK MANAGER, TO POCKET PC, THAT ENABLE YOU TO END THE PROCESS WITHOUT RESET.

Please can someone give a solution for this "no hearing the caller" problem!!!! Otherwise I can't use my qtek 9090. Everytime to switch the BT on and off isn't real solution.

My solution works...

yes but is that a real solution. I mean it' s not a real automatically solution. everytime I want to use BT I have to start it. is a radio update to 113 no solution?

Haven't updated yet, try it.

Tilt Goes Silent - I think bluetooth related

Hi everyone. I have had my Tilt for 4months now and it has given me a lot of joy. I have flashed and reflashed with no problems at all. I am currently using Schap's 4.31 Rom with 1.27.12.11 radio.
About a month ago i installed a new car stereo that has bluetooth connectivity with my phone - worked like a charm, paired very easily and generally appeared to be working with no probs.
Then i noticed that if i was in a bluetooth conversation and somebody else was calling (on call waiting), if i switched calls i could not hear anything, and if i ignored the second call, when the person on call waiting hang up, both conversations were terminated. I thought it was odd, but i just deactivated call waiting and thought, "let them try calling me later".
The other, a lot more serious problem, is that sometimes, randomly as far as i realised, the phone will go totally silent - incoming calls won't ring, and when i try to make a call, when i press "talk" then phone does not make that beep that it makes when an outgoing call is initiated. Should the person i call pick up i cannot hear them at all.
A soft reset takes care of this problem, but it has happened to me 3 times already, and i think it was after a bluetooth call.
Has anybody faced this problem before? I need to be available on the phone 24/7 due to my work and i really need to find a solution for this. Yesterday afternoon i took a nap for 45 minutes and had six missed calls that i never heard cause the phone never rang.
The phone is always on "ring" and at full volume.
Any ideas would be welcome.
Thanks
Alkis

Same issue
I'm assuming since I also am facing this same problem that it is not uncommon. It seems to me that it happens after a bluetooth device is turned off. Somehow it sets the volume on everything to mute. I thought only a soft reset would fix it until I discovered that it was just shutting off the volume. Still annoying, though.

Tilt problems with phone going silent
This problem has occurred with my phone every since upgrading to the WM 6.1 and it is related to a bluetooth device being hooked up. Often when someone calls the ringer will go from vibrate to on, but the volume turns all the way off. It will then cycle to off completely. The cycling occurs when a call comes in or when I hang up. I can stop this problem from happening by disconnecting the bluetooth head set. I have tried three different headsets and the problem occurs with all of them (Jawbone I, Jawbone II, and Plantronics) so I know it is not the brand of headset. HTC said to try a download of a screen dimmer problem, but have not done that yet. Anyone have any better advice?

did u guys ever find a solution to this?
its quite annoying missing calls because my phone decides to go silent for some reason

Same issue with GPS
I have the same issue, even when using software that accesses the GPS via bluetooth port. Muting is irritating, but at least voicemail catches messages. What really bothers me is that sometimes the mute is turned off and the volume up, especially when in a private meeting where we do not want interruptions
Gregg

HTC Tytn II bluetooth causes silent setting
I too have had the issue where my phone will go into total silent mode after using my bluetooth stereo hands-free feature. It doen't happen after using my bluetooth headset though.
It happens pretty regular that after using the bluetooth hands-free of my JVC car stereo that when I take the phone elsewhere it is totally silent. no ringer, no alarm (Ptravel alarm is what I use), no audio if I make a call (or receive a call).
It also will cause the phone to be silent on subsequent calls on the bluetooth stereo hands-free: ie: I take a call, hang up and another call will come in and I can answer it but have no audio.
My Tytn II is running the HTC (AT&T) WM 6.1 upgrade. The only thing I have done is use the Advanced configuration manager and the Kaiser tweak to change a few settings for performance and visual enhancements.
I see others are having the same problems.....Has anyone else used the tweaks and maybe that is root of the problem?
Has anyone discovered a fix (really important). My only options are to soft reset every time I get out of the car or not use the JVC bluetooth capability (which is why I replaced the stock radio in the first place).
Thanks

Hi rrackman,
I'd advice for you to look at the following thread:
http://forum.xda-developers.com/showthread.php?t=438457
It's quite long, so better subscribe to it and wait for responses. Several people with Tilt's have the same problem. Myself I have a JVC NX-7000 and an unbranded Kaiser (HTC TyTN II). It works fine with WM6.0, but I have the same issues you mention with WM6.1. First advice while we're searching for the solution: downgrade to WM6.0...
Regards,
Nika.

Is there a solution to this problem?

Try WM6.0 ROM - check out the thread I mention in my sig.
Regards,
Nika.

I did indeed take a look at the thread you linked earlier. Sorry for making the quick post earlier, I should have mentioned that this is regarding the "unexplained volume drop to zero" symptom, not the NSI symptom. Fortunately I don't have the NSI problem, just the drop to zero problem.
Of course downgrading to 6.0 would be the key solution, was just hoping to find a way to avoid doing just that. My phone never had the problem prior to 6.1 and was running the exact same list of applications and settings.

Vibration alert doesn't stop and audio breaks after a2dp.

Just as the title states... ie: I get an sms or email alert and the vibe just keeps on going until I goto volume silence then I can reactivate the volume.
I use ring and vibrate together for all alerts.
Anyone else have feed back with this or a similar problem?
*edit*
So I have done some testing and would like if someone else who uses a bluetooth headset to listen to music could try using BT a few times turning it off and on (when on use the htc media player) and see if after receiving a text message or email if your audio fires properly and your vibe stops. I have not used the BT all day today and the vibe/ring has performed perfectly. Basically after using BT a soft reset is in order.

What apps are you using?
Are you using any of the phone profile software such as SPB Phone Suite, Phone Weaver, Phone Alarm or the like? I had this issue occur when using Phone Suite and it was resolved when i de-installed the software.

I had same problem. I got mail and the vibration didn't stop. I don't use any profile manager. But I had same problem with Cruise with Wm6.1.

No profile managers at all. I have had this happen once before with an asus p527.
I have since done a hard reset on my diamond, we'll see how it goes. I did the reset because initially I've done alot of playing around testing apps and hacks to see what works best, I have re installed the apps I know work and have done. very little tweaking... Fingers crossed.

@thebiker
Do you use Bluetooth Audio for music or voice calls?
I think I have narrowed the problem down to this for myself.
I use my jabra 320 to listen to music on my way to work, after disconnecting the problems begin, vibrate doesn't want to stop and the ring doesn't want to work. A quick soft reset and everything appears to be good until I use my BT Headset again. Are you able to see a similar trend as I am? As I mentioned already I had this issue with my Asus so maybe there is a problem in general with Microsoft's BT Stack when using it with a2dp and in general derails audio on the system. My thinking is the audio is actually what is stopping on me so the Vib doesn't have the audio to tell it when to stop.
Thoughts on this matter anyone?

Bump... added some info to the first post and modified topic slightly, to more acurately describe my newer findings.
If someone using BT can try what is in the first post... thank you.

I have the Jabra BT620s headset and have the same problem. I can listen music and when a call comes in I can answer it and people hear me.
When I disconnect the headset i don't get any sound. Need to do a soft reset to get sound back on my phone. So no rings or sounds untill a soft reset is performed.
Stupid bluetooth... Anyone with a fix?

I can't find anyway other then soft reset. If you look at the volume after disconnecting a headset it sets the volume to 0.
I also have this issue on a tilt running winmo 6.1 and Microsoft BT Stack. So I believe it is a MS Operating/BT Stack issue.

What rom are u guys using? i'll try to have a look and experiment with the 1.37 rom

Shipped ROM: 1.34.831.1 WWE
Date: 5/25/08
WM6.1 CE OS 5.2.19588 (Build 19588.1.1.4)
Radio: 0.93.25.NS16
Protocol version: 52.24.25.08H

any news on this ?

I encounter this problem when receiving voice calls. No sound and neverending vibrate. Also, on several occasions the sound disappeared during the conversation. Only a soft reset could bring it back. The volume showed just good values, so it wasn't a spontanious mute.
I don't use a BT headset, never did. In fact BT isn't enabled at all. I did change the ringtype to ring and vibrate, perhaps thats the trigger. I changed back to default ringtone setting, lets see what happens.
I hope this will be solved quickly, it makes my Diamond a bit unusable as a phone...

rondol1 said:
I encounter this problem when receiving voice calls. No sound and neverending vibrate. Also, on several occasions the sound disappeared during the conversation. Only a soft reset could bring it back. The volume showed just good values, so it wasn't a spontanious mute.
I don't use a BT headset, never did. In fact BT isn't enabled at all. I did change the ringtype to ring and vibrate, perhaps thats the trigger. I changed back to default ringtone setting, lets see what happens.
I hope this will be solved quickly, it makes my Diamond a bit unusable as a phone...
Click to expand...
Click to collapse
Interesting results... I can so far state that so long as I reset after using BT Headset I don't experience this problem. There maybe more pointing to a bad audio driver in general that BT causes to crash immediately and potentially regular use like you have may also cause it to go loopy, might be a specific app and the way it interfaces with the audio api.

citats said:
Interesting results... I can so far state that so long as I reset after using BT Headset I don't experience this problem. There maybe more pointing to a bad audio driver in general that BT causes to crash immediately and potentially regular use like you have may also cause it to go loopy, might be a specific app and the way it interfaces with the audio api.
Click to expand...
Click to collapse
The only app I installed afterward is TomTom Nav6. But I remember the problem happend before installing this app as well. I made several hard resets but no change. Perhaps I try once more, don't change any setting and keep it clean for some days.

The same problem here with ROM ITA.

rondol1 said:
The only app I installed afterward is TomTom Nav6. But I remember the problem happend before installing this app as well. I made several hard resets but no change. Perhaps I try once more, don't change any setting and keep it clean for some days.
Click to expand...
Click to collapse
let us now what the result is..... maybe it is tomtom ?

xivius said:
let us now what the result is..... maybe it is tomtom ?
Click to expand...
Click to collapse
Nop - got the problem before installing any additional software.
I confirm that I also have the problem after using my BT stereo headset.
SR solves the problem ... until I use my BT headset again

UPDATE: UNRESOLVED on 1.37 stock rom, but i can hear people's voices on the line, but doesnt wake up on sms and no alert, and no call ring tone after using A2DP for 5 mins and switching off Bluetooth, using HTC Player in Touch FLo 3D

Baronic said:
UPDATE: UNRESOLVED on 1.37 stock rom, but i can hear people's voices on the line, but doesnt wake up on sms and no alert, and no call ring tone after using A2DP for 5 mins and switching off Bluetooth, using HTC Player in Touch FLo 3D
Click to expand...
Click to collapse
So you have no ringtone anymore ? And after a soft reset ?

no ringtone no sms tone, soft reset, press volume key, resolves it.

No incoming or outgoing audio. Anyone ? Anyone ?

Hello. I've been relentlessly searching everywhere for a solution to my plight.
My Diamond touch works fine for the first few incoming and outgoing calls but then all of a sudden there is no incoming or outgoing audio when I make or receive a call. I.E. the call connects but I can't hear the caller and they can't hear me. The phone still rings and caller display still works. Likewise I can still place a call in the normal way. Just no audio in either direction. Soft reset sometimes restores normal operation but sometimes a hard reset is required.
The phone was originally on UK Orange network but is now unlocked and running on UK O2.
I got to grips with flashing quickly enough and I have now tried upteen combinations of roms and radios but nothing seems to help.
Has anyone else had this problem ? Or better still managed to cure it ?
Any help or suggestions would be so so so appreciated.
Oh yeah just in case it's relevent.. The phone seems to work perfectly in every other way. wifi, bluetooth, 3G, gps etc. Battery life is a wee bit pants but I'm not too concerned about that.
Thanks in advance guys !

brianbelfast said:
Hello. I've been relentlessly searching everywhere for a solution to my plight.
My Diamond touch works fine for the first few incoming and outgoing calls but then all of a sudden there is no incoming or outgoing audio when I make or receive a call. I.E. the call connects but I can't hear the caller and they can't hear me. The phone still rings and caller display still works. Likewise I can still place a call in the normal way. Just no audio in either direction. Soft reset sometimes restores normal operation but sometimes a hard reset is required.
The phone was originally on UK Orange network but is now unlocked and running on UK O2.
I got to grips with flashing quickly enough and I have now tried upteen combinations of roms and radios but nothing seems to help.
Has anyone else had this problem ? Or better still managed to cure it ?
Any help or suggestions would be so so so appreciated.
Oh yeah just in case it's relevent.. The phone seems to work perfectly in every other way. wifi, bluetooth, 3G, gps etc. Battery life is a wee bit pants but I'm not too concerned about that.
Thanks in advance guys !
Click to expand...
Click to collapse
M8. I don't think you're on your own on this one. I have the same problem ...or similar. My phone pairs OK but drops the blue tooth connection usually on audio but quite often altogether. Re-pairing is a pain in the A$$. It's definitely a phone issue as I have the older qtek and a nokia that work with my kenwood system without a hitch but pair up the diamond and I'm pulling my hair out after 5 minutes.
I've tried the latest stable radio, setting pin code to 0000 & also turning off security but it still drops connection after an outgoing or incoming call.
Does anyone have a fix for this?

...and jetware 1.3 doesn't solve this either. Installed it the other day and pretty much the same ...audio is fine until a call is terminated and then it drops A2DP but sometimes stays connected on telephone. Other times both drop off!

bt stack
In my case it looks like the BT stack on the diamond is not compatible with the Kenwood DNX8220BT stack. I see quotes that HTC implemented their own stack for the Diamond so could someone put me out of my misery and tell me if it's possible to change the stack to something like that on the wizard as that works flawlessly with my Kenwood satnav?
ADD+

My phone does that weird thing too where I couldnt hear the other person on line. I have manage to found a quick fix for it tho.
Solution 1: During the call (when you notice you cant hear the other person), press the middle circle button (which will activate the screen if dimmed out), then press the speaker icon. This allows you to continue the conversation on speaker with the other person on line without having to soft/hard reset.
Solution 2 (works sometimes): During the call, reduce the volumn, wait a secnd or two, then raise it again.

Bt3030 - Shb6100/7100
Have the same problem with Philips shb7100 and shb6100. i also have tried the Jabra BT3030.
I used and test them on a Tyten and wizard no problem at all.

I had same problem before...found out is hardware problem...sent to htc care and after tat everything ok.

ADD+ said:
In my case it looks like the BT stack on the diamond is not compatible with the Kenwood DNX8220BT stack. I see quotes that HTC implemented their own stack for the Diamond so could someone put me out of my misery and tell me if it's possible to change the stack to something like that on the wizard as that works flawlessly with my Kenwood satnav?
ADD+
Click to expand...
Click to collapse
I have the exact same model (kenwood dnx8220bt and XDA ignito (diamond), same problem where everything is okay but when you go into the contacts menu and try to make a call, BT connection either drops or nothing happens when you try to make the call.... this is a joke.... how can my old HTC P3300 work with it without a problem and this newer Diamond flop like a fish...
any updates or news??

I've the same problem. No Sound after some call or others sounds play. When this happens and if I receive a call the others not listen my voice. This means that when audio disappear, speaker and also microphone not work, like the system can't comunicate with them. The volume control not resolve my problem. I've done HR and with nothing installed in my phone the problem come back again after few minutes. So it's not a problem of third part bad software, but htc orginal software or hardware problem.
Anyone solve it o have idea?
Thanks!

I join the list - having problems with my xcarlink which used to work with my P3300
Tried using A2DP Toggle which helped on the artemis but seems to have NO effect at all on Diamond
The Diamond does connect flawlessly to my jabra earpiece and my Sony ericsson bluetooth speaker

ninja_pimp said:
I had same problem before...found out is hardware problem...sent to htc care and after tat everything ok.
Click to expand...
Click to collapse
I have the same problem. Sent my HTC back twice for repair but still no solution. The first time they didn't found the problem, the second time they replaced the speaker.
What did they do with your phone to fix it?

According to this thread http://forum.xda-developers.com/showthread.php?t=431826 it is a hardware issue. The phone needs to go back to the supplier as it is faulty.

Diamond Bluetooth HeadSet Bug

Ok, not sure if anyone got the same problem as mine, but here is my problem:
I have a Diamond using AZTOR v7 Rom, radio vBS14 if that matters and Sony Ericsson DS205 as my headset. I start my bluetooth on my diamond and can pair up with the DS205 without any problem. I can also listen to music without lag and sound is also crystal and solid.
When there is a call kicks in, I can answer the call by pressing a button on my DS205..... However, the problem comes when I end my call, the headset will be disconnected afterward and I have to manually press a button on the DS205 to make it reconnect. Each time when I make a call or when I receive a call the headset will be disconnected.
Luckily (or not), I found a workaround: Whenever I pair up my headset, I need to go to Setting -> Bluetooth -> and "Refresh" the services that I want to enable on the DS205 headset. That involves un-checking the services enabled (including "Wireless Stereo" and "Hands Free") and re-checking the services again. After I have done this "resetting", the disconnection problem I described above will be gone.....
Each time I restart the phone or have the bluetooh disabled on the phone, I need to go through that manual procedure again to make my headset work perfectly.
As you can imagine, that is quite annoying.......does anyone have the same problem as me?

I don't have this problem, but i have another problem, when i use the orignal rom, i can use my headset(jabra bt3030) in my diamond and it will automatically connect to use hands free and wireless stereo mode when i turn on bluetooth, so when i change to use swift 7.5 full rom, i have to resetting the bluetooth in diamond everytime when i close bluetooth

I can only get wireless stereo for my Plantronics Bluetooth Stereo headset. Any ideas why I can't get hands-free. Radio issue?
It was possible with some earlier ROM, but I can't remember which... (yes, I'm a flashing addict).

I'm having the same exact problem & it's annoying as hell. At this point, I can't get the bluetooth function on the phone to activate at all. I use the same bluetooth on another phone with no problems whatsoever, so I know it's the phone. I'm running the original rom.....not a flasher.

Have you tried Jetware?

Sorry, just installing this doesn't change anything. Still no hands-free.
Is there a specific option you want us to set?
shinji_lee said:
Have you tried Jetware?
Click to expand...
Click to collapse

lit2fly said:
... Each time when I make a call or when I receive a call the headset will be disconnected.
Luckily (or not), I found a workaround: Whenever I pair up my headset, I need to go to Setting -> Bluetooth -> and "Refresh" the services that I want to enable on the DS205 headset. That involves un-checking the services enabled (including "Wireless Stereo" and "Hands Free") and re-checking the services again. After I have done this "resetting", the disconnection problem I described above will be gone.....
Each time I restart the phone or have the bluetooh disabled on the phone, I need to go through that manual procedure again to make my headset work perfectly.
As you can imagine, that is quite annoying.......does anyone have the same problem as me?
Click to expand...
Click to collapse
Yes - I have a very similar problem with my jabra SP700. The Diamond 'forgets' the wireless bluetooth mode every time I disconnect the two devices (although the Stereo Bluetooth icon is still showing in the status bar).
For a short while I was having to re-pair the devices every time I got in the car - until I found the same workaround as you.
There must be a proper solution???

Hello, I had that problem in my HTC Diamond with Pioneer DEH-700bt and my jabra 3030 and she solves when changing in the registry the key to it that identifies the device in pocketpc HKLM/Software/Microsoft/Bluetooth/Sys the key "COD" and I introduced the value decimal 5898764 that identifies the device in smartphone
luck

juanfervs said:
Hello, I had that problem in my HTC Diamond with Pioneer DEH-700bt and my jabra 3030 and she solves when changing in the registry the key to it that identifies the device in pocketpc HKLM/Software/Microsoft/Bluetooth/Sys the key "COD" and I introduced the value decimal 5898764 that identifies the device in smartphone
luck
Click to expand...
Click to collapse
I have this value in COD key but I have the problem anyway.
Any solution to this annoying problem?

i use my diamond with my bluetooth handsfree kit in the car, it is classed on the phone as a headset though. the sound is ok, a bit echoey but ok. but the microphone doesnt seem to pick up my voice, i have to really shout for people to hear me, on my old Xda Orbit it worked fine. any ideas?