Database Develop

Deleted My HTC Wizard Radio Rom

I was tryin to update the radio rom on my MDA and i i was usin the RUU and i guess i did somethin wrong cause now thers a X where the active sync is and a exclamation point where my reception bar is, also wen i go to about device i dont see the radio rom where the others ones are listed. So i downloaded the universal radio gsm exe but it doesnt recogize my device even thought it pluged in my microsoft active sync does recognize it either. and now its runs extremly slow, could someone give me some insite to wat i have done wrong and how i can fix it,
Thanks klawdlan
PS i am runin the orginal firm that came wit my mda US-Tmobile

The radio for the Universal will not work in the Wizard.

so what should i do to fix my prob

Download a Radio Rom (as an example you could try the Cingular 2.25 Radio Rom) for the Wizard on the XDA FTP

my pc is nto recognize it after i deleted the radio firm, even wen i plug in the wall charger thers no indication thats its chargin.

Can you get in bootloader mode by pressing the camera button (and hold it) and then doing a soft-reset?
If you get the tri-color screen, THEN try to update the Radio Rom, if that doesn't work, then you are in deep **** I guess!

yea i can get to that screen

Then go into that screen and flash the Radio Rom!
The Radio Rom is located here: ftp://xda:[email protected]/Wizard/Radio_Roms/wizard_radio version-2.25.zip
Good luck.

how will i get the rom to the pda if it wont even recognize it in microsoft synce, i cant even browse the device wen i go to my computer?

Listen carefully!!
- Connect your device via the cable to your PC.
- Get your device in the bootloader (tricolor-screen) mode.
- Unzip the zip file with the Radio Rom
- Go into to folder you unzipped it in
- Doubleclick the .exe file and follow instructions on your screen!
Good luck!
p.s. You flash Roms from your PC to your device, you dont flash Roms "on the device itself".
p.s.2 Maybe it will be smart to do a hard-reset afterwards (because your device is very very slow, look at my post in this topic on how to do a hard-reset http://forum.xda-developers.com/viewtopic.php?t=56145&highlight= ).

i did everythin u said word for word wen ruu was runin this came up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and i continued and in about device it doesnt show a radio rom

Just continue!!
Just press Next or Continue until it starts flashing or gives an error!

i did and i still get no radio rom in the end

Dont pay attention whats on your screen.
You can end up with 2 things:
1) You get an error and the update failed.
2) The flashing begins and you will get a message when it's done!
Molski

i get the message that its done and that i flashed, but in im in wm5 and i go to systems about device i still dont see a radio rom

Then grab a Full Rom from here: ftp://xda:[email protected]/Wizard/Roms
And flash the Full Rom the same way I decribed for flashing only your Radio Rom.
Good luck pal !
p.s. When you turn on your device, don't you see a Radio Rom (GSM version number in your top-left corner?

alright ima try it now, thanks

PRAISE BE UNTO molski FOR HE HAS HELPED ME FIX MY FONE, thanks man i got a hang of this update thing now, learned mucho mucho i would make a new thread in ur honor if it were proper forum edicate

It's never wrong to thank someone (especially me in a new thread haha)
I'm glad your phone is working again that and you learned how to do things like flashing your Wizard!
And now you can play around with it....you know what to do if something goes wrong
Regards,
Molski.

PDAVIET Touch Flo Professional Rom v4.12.07.08 - Herald

part 1
http://www.box.net/shared/ofzgxbvsbv
part 2
http://www.megaupload.com/?d=OJUWHJ5M
All I know is that theres a 8MB Page Pool on this one.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Haha, I bricked my device. I guess cause I had comm manager up cause I put it in flight mode. Flashing tmobile RUU now and then gonna running this one again.

Part 2
http://www.megaupload.com/?d=OJUWHJ5M

Updated first post with that link. Thanks and when you gonna release yours man! I'm dying to test it out but this TouchFLO is addicting. I'm flashing it as we speak so let's see whats been fixed!

Greetings! The first link seems to be down. Just to double check, this ROM works with all HTC P4350's regardless of previous os?
Model No .: HERA100
Platform .: PocketPC
ROM Version .: 5.4.405.1 WWE
Windows MObile 5.0 OS 5.1.422 (Build 15633.3.2.0)
Kudos on the ROM, looks great on the Herald. Thanks!

Hmmm
Can't get it to work on my wing, right off the bat it says
"the system cannot execute the specified program"
any ideas?

zookolo said:
Greetings! The first link seems to be down. Just to double check, this ROM works with all HTC P4350's regardless of previous os?
Model No .: HERA100
Platform .: PocketPC
ROM Version .: 5.4.405.1 WWE
Windows MObile 5.0 OS 5.1.422 (Build 15633.3.2.0)
Kudos on the ROM, looks great on the Herald. Thanks!
Click to expand...
Click to collapse
It is recommended to run this ROM with the previous ROM version as 5.4.405.1 WWE. This is because there is a problem with the old radio rom and WM6. The first link is up and running, just downloaded using that link. This ROM seems a bit slow with the PP set at 8, but conditions improved greatly setting back at 4. Nice rom but I'll have to return to what I was using before because it seems that the X button issue is still present. Not sure what was upgraded in this ROM but will take a look right now.

i flashed it, X button problems still there so I don't know what was fixed. I'll try it out more tonight and check.

Woohoo!
Ok got it running, so far looks good. For those of you who are flashing this for this first time read this it's very important.
after you run the UPGRADE ROM.bat you'll get an error display on your device screen. DO NOTHING!!!!!!!!!!! don't hit ok, don't disconnect, the device is still being flashed.
When it's done do a hard reset, the T-Mobile start up logo (for Wing users) will display for a bit (3 mins?) but the PDAViet splash screen will appear afterwards.
Good luck, and happy flashing!

Hi, one Question:
i have HTC herald with WM5, never upgraded, never nothing, what exactly i must do to instal WM6 without any crashing?

For T-Mobile Users
see next post

Nevermind
Since this has the new HTC Network Wizard you don't need the info from my last post.

Thanks for the heads up “Neptune”
Haha, ROM installed perfectly! Played for a few mins looks sweet then tried to do a hard reset with no avail screen just stayed at BOOTLOADER.
Preformed a soft reset, os wouldn’t load correctly just stayed at splash screen, tried various things but was still unable to boot past the splash screen. Potentially Bricked P4350 it seems!
Below are the steps I preformed to recover using the search function on the forum and google.
1:. Booted device into BOOTLOADER mode by holding down the cam soft button then inserting the stylus into soft reset button.
2:. Whilst at the coloured screen attached device to computer via USB (you should notice USB appear at the button of the screen)
3:. Downloaded latest ROM for my device from here
4:. Double clicked exe and followed on screen instructions (the updater wont detect your phone because its not connected via active sync don’t worry still proceed)
5:. Wait for the updater to finish, device may reboot a few times this is normal, once completed you shall see the welcome screen.
Potentially bricked device restored, thanks to this forum I don’t have an expensive paper weight. Lots of Kudos to all!!!
I still have a problem, my device wont prompt for hard reset anyone have any ideas? (Stayes at red/green/blue/white BOOTLOADER screen) Searched forums and google for answers no luck yet. Any feedback would be greatly appreciated.
Peace!

failsafe
Maximus-CZ said:
Hi, one Question:
i have HTC herald with WM5, never upgraded, never nothing, what exactly i must do to instal WM6 without any crashing?
Click to expand...
Click to collapse
The radio needs to be version 2.79 for WM6 to work. Also, Its always safe to have a working WM5 RUU ready in case you brick your herald. Please take a look in the wiki if you can find any RUU that works on your device and install it. This should update your Radio to 2.79 if you don't have it yet.
If none of the RUUs in the wiki works on your device, you better retain your current installation and wait for HTC to finaly release the official WM6 RUU.

tried to install, had an error and now I have a brick. Put phone into bootloader screen, try to use the Wing RUU utility, but keeps giving me a connection error. Any help would be appreciated!

nice, it seems i have all in my PC,
i have RUU WM 5 for herald, seems fuction but dont know (i dont tryed)
soo, if i understand if i bricked my ROM, my RUU WM5 will ever set my Herald to manufacture with good Radio version (i have 02.71) so my best way is:
Run RUU WM5, (it will put my Radio Version 2.79)
after i will instal some WM6 by the guide on that WM6...
after that i will got WM 6 works? (i will do some backups of my items in memory)
is that right???

Thoughts on the ROM
Ok so after playing iwth the ROM for about an hour or so, I decided I didn't really care for it. It's just too buggy for me. It seems to be very slow in response time and seems to lag, even with over clocking. Oh well, back to the stock T-Mobile ROM I guess.

anyone have any input? I would really like to get my phone working again!

Installing it over a spanish rom
You think It´ll install if my current ROM is in Spanish? Would I need to tweak anything? I have a
HTC p4350 SO 5.1.422
ROM version 1.8.412.2 ESN
Radio Version: 02.71.90
I don´t mind it resulting in English after it, As a matter of fact, I preffer it.
Thanks.

After a few days using a this rom, I can tell that the ok button problem is not completely fixed... sometimes you still need to fast tap it twice to make it work!

Can't flash radio, no GSM error, need help

Hello
I downloaded the new radio this morning
when tried to flash it to my Trinity I've got "connection timeout" error
now when I start it there is an error "no GSM"
and it freeze in the HTC screen
I searched the forum for all day, flashed alot of radios, hard-spls and so on but didn't manage to flash a working radio
Please give me some instructions or a link the the right thread
I have original HTC rom with SPL-1.30 Olipro
Thanks

exactly the same problem here, need help guys, anyone?

checkout this site for more info that may help you. i had to downgrade/reflash to SPL 1.20 Olipro, flash the new Radio and then reflash to SPL 1.30 Olipro.

I managed to fix it
download this file
http://forum.xda-developers.com/attachment.php?attachmentid=43539&d= 1184192788
in ActiveSync go to connection settings
uncheck the allow USB connections
restart the device in bootloader mode and connect it to PC
run the .BAT file
the device will boot in bootloader SPL 1.2
now you can flash ROM\RADIO
good luck

yes, if you're having trouble flashing radio, please use Hard-SPL 1.20 olipro

wow guys thank you, you saved me 600 eur, i've read around the forum that htc wouldn't have given me warranty rights with the modified rom installed on the trinity, actually the radio update process is around 40% (while it wasn't going further 7% before). So i assume everything is working correctly.
After the radio i'll be installing the UDK4 WM6 again and everything should work correctly now (so to prevent any other less experienced guy to have similar problem, if he wants to upgrade both main rom and radio rom, i suggest is better to upgrade the radio rom before, don't you agree?).
thank you guys, i'll let you know my feedback as soon my trinity is up & running again

thanks you all guys, everything works correctly, i didn't know that we could reinstall any rom with a "bad flash / brick" problem without sending it in htc assistence.
The problem was regarding only the Radio ROM, that was completely missing after the bad upgrade. Didn't have to reinstallo the Main rom (UDK4 In my case).
Thank you all again, i wasn't able to sleep thinking about this thank you can have a good night now
Regards,
Michele!

racerx_ said:
yes, if you're having trouble flashing radio, please use Hard-SPL 1.20 olipro
Click to expand...
Click to collapse
Where to get this? I only find V1.30. Thanks!

download it here .. look at post #85

Thank you very much! I didn't find it!
Bye, Peter

I have a siilar problem. I had flashed radio 1.46 completily the progress were up to 100 %, but when I soft reset the device say "No GSM", only if I put off batery during 10/15 seconds it is all right,
Whats is hapenng????
Any solution????
Thanks

I have the same problem too...
Dispositive info no said nothing about radio version.
I've load Olipro but if I try flash it with a radio version it dont pass of 0%
What can I do?
Best regards

Same 0% problem
Ayasystems, I have the same problem of ROM update not going over 0%... how did you fix it?
Thanks in advance

nirgur said:
I managed to fix it
download this file
http://forum.xda-developers.com/attachment.php?attachmentid=43539&d= 1184192788
in ActiveSync go to connection settings
uncheck the allow USB connections
restart the device in bootloader mode and connect it to PC
run the .BAT file
the device will boot in bootloader SPL 1.2
now you can flash ROM\RADIO
good luck
Click to expand...
Click to collapse
How long does it takes to complete this part of the program?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It seems if he stucks with this part by me. How can I check if it is still working? What do I have to do now? Retry it again? Or..?

I tried many of the solutions here to fix my "no GSM" error message. I even sent it to Pocket PC techs. They "remolded" the chip.?? I don't know what that means or even if I said it right. I recommend their service. BUT, that still didn't solve the problem. I finally bent the sim card brackets down to hold the sim card a little tighter, and it worked. Haven't had any problems since. I spent months and about 100 US to fix this and thank God it works now.
I really think it was a combination of what Pocket PC techs did, plus bending the brackets down. I don't think any of the software fixes helped at all.
Hope this helps out. Blessings all!

Error 270

Hi everyone!
I've got a big problem. I Flashed my 3600 (Swisscom version XPA v1510) with Karmba's WM6 in en. 3 Days later i want to flash a ger version. then it has a failure. since then, ever when i want to flash something (wm5, HTC wm6 lit, bepe etc. cid unlock crashproof spl etc.) it goes to 1% or by cid to 7% then my trinity goes black screen, i hear the "usb connection lost" sound on my pc and the RUU says error 270 update error, the image file is corrupt. i loaded down the files several times, on my loc. HD, ext HD, SD card... nothing works. when i turn on my phon normally, the htc screen appears wit a swisscom label at the bottom, with some numbers and then... nothing. i can't do anything. i only can start it in bootlader mod with a key combination... i need my phone, so i need help please! i've seen, when i put in my mini sd and start the bootloader, before the 3 color screen appears, it says "loading" can i eventually flash from the card? i'm really despaired... plz help!
tnx and greetz!

just had the same problem on my trinity. rom upgrade wouldnt go further than 1%, giving me an error 270 on the flashtool on windows after this one percent.
try: splxploit (use forums search).
go into boot loader (camera + power on), close wescomm (or something like that) and rapimgr on windows via taskmanager and start unbrick.bat. after that flash "Hard-SPL". and after that use the rom you like ...
worked for me. good luck.

what u described, i tryed several times. it never works, in 25 tryis the xploit worked 2 times. after that the hard spl goes to 2 or 7 % and then the same... but now i've tryed what u said, with deactivate this 2 ****ing tasks ^^ and look there, it worked! tnx very much! before, i loaded every file from this ftp server wich might help, but there were only 2 tasks... thanks again and have an nice evening! greetz

hehe, glad to hear ...
btw. the problem occurred to me too, when flashing form an english version to a german one. at first it flashed to 20% or so and then disconnected - dropping the phone back to the colored bootloaderscreen. the flashing tool wanted me to follow some steps, which i did, and tried to flash the phone again. and there this 1% disconnect started to happen each time i wanted to flash - independent of the rom i used. after following the steps mentioned above the whole process worked fine again.

Error 270 mean bootloader must be updated.
Search for hard spl on wiki

bootloader? i can update nothing, block at 1% image update. I have the same Version like Blade Hunter, HSPL-1.07.0000
But now i cannot update mit Oli's Hard-SPL, same error. I make it over XP with the automatic installation of Hard-SPL.
Somebody nows an other update methode how works. At the moment i can do nothing with my mobile, like Blade Hunter.

ok, works again after flash with splxploit:
http://forum.xda-developers.com/showthread.php?t=308691
The basic Probleme was the old version of Hard-SPL: TRIN100
SPL-1.07.0000

Perfect!
Hi guys!
I had the exact same problem Blade Hunter described (also with with Karmba's WM6)! I was able to solve the proble by killing the 2 windows tasks that control de usb/activesyn (wcescom & rapiXXX) and using the unbrick tool!
I have successfully unbricked my trinity and flashed a new rom.
Great pda, great xda-dev community!
Flaneur

I have the same problem with my Touch. I am trying to install the following
[WM 6.1] NEW BLUE ELVES ROM V5.0 - CE OS 5.2.2021 (BUILD 19521.1.1.0) (8MB PAGEPOOL)
When The device gets the 3% it shows the following message:
Image FIle is Corrupted. PLease check your update utility.
Anyone could please help me? My device is a HTC Touch with 128/256MB. Thanks for all!

chalid said:
just had the same problem on my trinity. Rom upgrade wouldnt go further than 1%, giving me an error 270 on the flashtool on windows after this one percent.
Try: Splxploit (use forums search).
Go into boot loader (camera + power on), close wescomm (or something like that) and rapimgr on windows via taskmanager and start unbrick.bat. After that flash "hard-spl". And after that use the rom you like ...
Worked for me. Good luck.
Click to expand...
Click to collapse
good bles you

Blade Hunter said:
what u described, i tryed several times. it never works, in 25 tryis the xploit worked 2 times. after that the hard spl goes to 2 or 7 % and then the same... but now i've tryed what u said, with deactivate this 2 ****ing tasks ^^ and look there, it worked! tnx very much! before, i loaded every file from this ftp server wich might help, but there were only 2 tasks... thanks again and have an nice evening! greetz
Click to expand...
Click to collapse
sorry can you describe the exact passage and how you have resolved? i am in the same situation of your girst post...but not understand how to resolve..i ve try to kill the two task, and splxplit work fine and flash the hardspl 1.20 but when i try to flash original rom from PC with windows XP.. it start and load to 13% and stop (not reboot, not errore message) nothing.... if i try to flash only a radio rom it load to 7% and reboot with error message 270 image corrupt..
i am very disperate....
helpppppp!!!!!!
regards

I have the same problem but on my SHadow. I can' t do anything. Help me.

I have the problem,too.
When i run unbrick.bat I Get that picture.
How can I resolve problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hi,
had the same problem and with the help of you guys I could fix it.
Just for everyone who could not fix it a short summary:
1. To be sure, do all the stuff on a Windows XP machine
2. DISABLE "Allow USB Connection" in Active Sync so you see a small red X symbol next to the Active Sync symbol
3. Start the device into Bootloader mode (Cam+Power+Reset) and connect the device to your PC and make sure USB is written on the bottom of your screen (NOT Serial!)
4. Download splxploit (http://forum.xda-developers.com/attachment.php?attachmentid=39770&d=1180043588) and execute unlock on your PC
5. Follow the instructions
6. Download HardSPL (http://forum.xda-developers.com/attachment.php?attachmentid=45018&d=1185364317) and follow the instructions
7. Finally (to be sure) restart into Bootloader mode and check if SPL is showing "SPL-1.30.Olipro) - if this is the case you've done it !
8. Flash your preferred ROM via miniSD or USB connection
Hopefully this should be clear to everyone
Cheers

Try using/buy better USB cable. Cable with Ferrite core is recommended. Happened to me once.
Hope thet help.

FACEOFF!
Thanks a lot ... you saved my day!

Chalid,
Hey man, Thanks for this info! I have been pulling my hair out over this phone for ages, finally the info you've given has been the breakthrough I needed! God bless!!

[Q] Stuck in cyclic restart after Radio ROM upgrade!?!

Hi, i am from Turkey,
I have a Touch Diamond (Diam100) bought from Norway. I just loaded a new radio ROM onto my phone (I am security unlocked and sim unlocked and hard SPL'd, thanks to Olinex!) and everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load
However - it is completely stuck in a cyclic reboot. I get the HTC startup screen and then it just reboots again and again. I tried a hard reset and got the confirmation message that it was restored OK, press volume up to boot. However it does the same reboot again and again
I tried some thing like that:
*Try to install "RUU_Diamond_HTC_NOR_1.93.409.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship" stock rom, but it freezes at %13
*Try to install stock radio rom "Diamond_Radio_1.00.25.05" bu it freezes at %95!
*Try to install stock spl, everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load but the problem seems again!
i can install cooked roms, but after restart this problem happens again and again!
Can you help me please? I love my phone very much.. (
(sorry for my poor english)

Hi, try MTTY your phone. log in to use search in these fora and find "The definitive MTTY thread". It's a bit of...homework to do but will get you out of this.Your issue is caused by certain undeleted items which remain after a rom flash as far as i've learned.I hadn't have to do it until after several ROM flashes but guess sooner or later everybody faces it.Well it's time you did it too...
Cheers

[email protected] said:
Hi, try MTTY your phone. log in to use search in these fora and find "The definitive MTTY thread". It's a bit of...homework to do but will get you out of this.Your issue is caused by certain undeleted items which remain after a rom flash as far as i've learned.I hadn't have to do it until after several ROM flashes but guess sooner or later everybody faces it.Well it's time you did it too...
Cheers
Click to expand...
Click to collapse
hi, i tried it step by step. but nothing happens

Hi,
Dude, that's frustrating, however as i understand it's a stock SPL you've presently got on your phone, right? I don't know which SPL version you've had before but just in case, try to update to HSPL version 1,93. Then try flashing a ROM you like.If problems persist MTTY your phone again after having upgraded HSPL.
And a word of advice based on own experience: Not all radios are compatible with all ROMs and vice versa...
Hope you're soon going to get this right,
Regards from Greece

merinos said:
Hi, i am from Turkey,
I have a Touch Diamond (Diam100) bought from Norway. I just loaded a new radio ROM onto my phone (I am security unlocked and sim unlocked and hard SPL'd, thanks to Olinex!) and everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load
However - it is completely stuck in a cyclic reboot. I get the HTC startup screen and then it just reboots again and again. I tried a hard reset and got the confirmation message that it was restored OK, press volume up to boot. However it does the same reboot again and again
I tried some thing like that:
*Try to install "RUU_Diamond_HTC_NOR_1.93.409.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship" stock rom, but it freezes at %13
*Try to install stock radio rom "Diamond_Radio_1.00.25.05" bu it freezes at %95!
*Try to install stock spl, everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load but the problem seems again!
i can install cooked roms, but after restart this problem happens again and again!
Can you help me please? I love my phone very much.. (
(sorry for my poor english)
Click to expand...
Click to collapse
before you upgrade the radio, whether it has been unlock device with the XDA Unlock Application ..? try to hard reset your device after that make sure the device go to the boot loader (3 colors screen) and reflash with the official ROM!! then unlock the device and immediately you can do to upgrade the radio (at the time of upgrading the radio make sure the SIM card removed)

[email protected] said:
Hi,
Dude, that's frustrating, however as i understand it's a stock SPL you've presently got on your phone, right? I don't know which SPL version you've had before but just in case, try to update to HSPL version 1,93. Then try flashing a ROM you like.If problems persist MTTY your phone again after having upgraded HSPL.
And a word of advice based on own experience: Not all radios are compatible with all ROMs and vice versa...
Hope you're soon going to get this right,
Regards from Greece
Click to expand...
Click to collapse
hi, i can not change the hspl, i tried again and again, but nothing changed.
(hspl olinex 1.93 signed and unsigned versions)
i tried to change the hspl to stock spl, installation was going and everything was ok (%100 inst.) but after restart, spl 1.40 olinex in bootloader mode again!
i don't know how can i change this 1.40 spl. i think the main problem is spl and radio rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hakim Rahman said:
before you upgrade the radio, whether it has been unlock device with the XDA Unlock Application ..? try to hard reset your device after that make sure the device go to the boot loader (3 colors screen) and reflash with the official ROM!! then unlock the device and immediately you can do to upgrade the radio (at the time of upgrading the radio make sure the SIM card removed)
Click to expand...
Click to collapse
hi, my device is security unlocked, and hspl version is olinex 1.40.
i can not acsess to os, it just stay in the touch diamond screen .
thanks for the solution.

merinos said:
hi, my device is security unlocked, and hspl version is olinex 1.40.
i can not acsess to os, it just stay in the touch diamond screen .
thanks for the solution.
Click to expand...
Click to collapse
you have to do is to Hard Reset your device and reFlash