Database Develop

Deleted My HTC Wizard Radio Rom

I was tryin to update the radio rom on my MDA and i i was usin the RUU and i guess i did somethin wrong cause now thers a X where the active sync is and a exclamation point where my reception bar is, also wen i go to about device i dont see the radio rom where the others ones are listed. So i downloaded the universal radio gsm exe but it doesnt recogize my device even thought it pluged in my microsoft active sync does recognize it either. and now its runs extremly slow, could someone give me some insite to wat i have done wrong and how i can fix it,
Thanks klawdlan
PS i am runin the orginal firm that came wit my mda US-Tmobile

The radio for the Universal will not work in the Wizard.

so what should i do to fix my prob

Download a Radio Rom (as an example you could try the Cingular 2.25 Radio Rom) for the Wizard on the XDA FTP

my pc is nto recognize it after i deleted the radio firm, even wen i plug in the wall charger thers no indication thats its chargin.

Can you get in bootloader mode by pressing the camera button (and hold it) and then doing a soft-reset?
If you get the tri-color screen, THEN try to update the Radio Rom, if that doesn't work, then you are in deep **** I guess!

yea i can get to that screen

Then go into that screen and flash the Radio Rom!
The Radio Rom is located here: ftp://xda:[email protected]/Wizard/Radio_Roms/wizard_radio version-2.25.zip
Good luck.

how will i get the rom to the pda if it wont even recognize it in microsoft synce, i cant even browse the device wen i go to my computer?

Listen carefully!!
- Connect your device via the cable to your PC.
- Get your device in the bootloader (tricolor-screen) mode.
- Unzip the zip file with the Radio Rom
- Go into to folder you unzipped it in
- Doubleclick the .exe file and follow instructions on your screen!
Good luck!
p.s. You flash Roms from your PC to your device, you dont flash Roms "on the device itself".
p.s.2 Maybe it will be smart to do a hard-reset afterwards (because your device is very very slow, look at my post in this topic on how to do a hard-reset http://forum.xda-developers.com/viewtopic.php?t=56145&highlight= ).

i did everythin u said word for word wen ruu was runin this came up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and i continued and in about device it doesnt show a radio rom

Just continue!!
Just press Next or Continue until it starts flashing or gives an error!

i did and i still get no radio rom in the end

Dont pay attention whats on your screen.
You can end up with 2 things:
1) You get an error and the update failed.
2) The flashing begins and you will get a message when it's done!
Molski

i get the message that its done and that i flashed, but in im in wm5 and i go to systems about device i still dont see a radio rom

Then grab a Full Rom from here: ftp://xda:[email protected]/Wizard/Roms
And flash the Full Rom the same way I decribed for flashing only your Radio Rom.
Good luck pal !
p.s. When you turn on your device, don't you see a Radio Rom (GSM version number in your top-left corner?

alright ima try it now, thanks

PRAISE BE UNTO molski FOR HE HAS HELPED ME FIX MY FONE, thanks man i got a hang of this update thing now, learned mucho mucho i would make a new thread in ur honor if it were proper forum edicate

It's never wrong to thank someone (especially me in a new thread haha)
I'm glad your phone is working again that and you learned how to do things like flashing your Wizard!
And now you can play around with it....you know what to do if something goes wrong
Regards,
Molski.

It won't start anymore! Help!

I just have this phone, the SPV M700 for a few days. With the Orane brand on it. I also have the SPV M500 (Magician) with big-storage rom on it. So I thought I would know how to do this, but apparently I dont?
I want to update and want to remove the CID and Sim-lock. But first things first, so I want to run Hard-SPL.
So I have downloaded the Hard-SPL file and run it. When I do this, everything goes like it should till the tri-color screen on my pda. After that I get this error in windows (XP):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
En I got this screen on my PDA:
So something goes wrong. I have this also when I try to flash to a Orange rom (I have an Dutch rom on the PDA but I also get this message when try to flash it to an English ROM from Orange. And every other rom) When I put out the battery for 3 sec or just simply do a soft-reset everything seems to work like it did before the I tried flash.
Can someone plz help me, I don't know what to do!

I again got the error with Hard-SPL but someone said to me he had that to and he just went to the next step. So I did to. This time it seemed to work because progress balk was going until 22%. Then it stopped. I did a repair as it was described in the flashing program and now it doesn't start anymore. It goes until this screen and not further:
I can do a hard reset but it still stucks on the same screen. WHAT NOW??

I first get this screen, and just before the text (M 05 / B 05 / D 1.23) disappears, the text NO GSM comes in the blue-area above the D 1.23
This is there for I think half a second and then I have the screen as in my post above.

I have read that I can try 3 things.
NeilM said:
You can try 2 other things!
Download the Radio ROM again- you may have had a downlaod glitch in the 1st one. V1.38 is the best one to try.
Download and install the offical HTC WM5 ROM- this should be a full ROM including Radio, so sometimes completes more effectively. If you are brave, you can them retry the WM6 flash!
Click to expand...
Click to collapse
and
zohaer21 said:
since bricking a hermes i stopped taking chances doing rom upgrades via usb..
the method that is most reliable ad safe is... via SD card
extract RUU_signed file from the upgrade pack (use winrar) and then copy it to the root of a blank sd (mini or micro etc) and rename to TRINIMG.nbh ..enter bootloader and follow the steps.. its fast and most reliable
Click to expand...
Click to collapse
I think that trying the first thing is the best? Retrying to install a new Radio Rom. He suggest to use version V1.38. Is this still the best rom to try it with? Or can I better take a newer/older one?
And where can I find these Radio Roms?

An update how far I am now, I have read about Splxploit
nirgur said:
I managed to fix it
download this file
http://forum.xda-developers.com/attachment.php?attachmentid=43539&d= 1184192788
in ActiveSync go to connection settings
uncheck the allow USB connections
restart the device in bootloader mode and connect it to PC
run the .BAT file
the device will boot in bootloader SPL 1.2
now you can flash ROM\RADIO
good luck
Click to expand...
Click to collapse
How long does it takes to complete this part of the program?
It seems if he stucks with this part by me. How can I check if it is still working? What do I have to do now? Retry it again? Or..?
Click to expand...
Click to collapse
I have done that. I didn't came further than the screenshot above. So I started unbrick.dat again and this time it doesn't go further than this:
Even after another retry to start it, it doesn't go further. It doesn't reach the same status as this picture:
(picture is from http://trinityguides.info/index.php?option=content&task=view&id=22 )
What do I have to do now? I'm stucked again..

Markos said:
An update how far I am now, I have read about Splxploit
I have done that. I didn't came further than the screenshot above. So I started unbrick.dat again and this time it doesn't go further than this:
Even after another retry to start it, it doesn't go further. It doesn't reach the same status as this picture:
(picture is from http://trinityguides.info/index.php?option=content&task=view&id=22 )
What do I have to do now? I'm stucked again..
Click to expand...
Click to collapse
where come you from ?
please write a PM in dutch to me
I will help you

YESS! I have done it, I don't know how but it works again I don't have a clue what I have done. I have done so many things and everytime I get a different respons with the same actions.. But it works!
But now, I want to remove the sim-lock. I have followed the actions in the topic. When I do the automatic way (run AUTO_Unlock_v1.bat) I get this error:
And if I do it this way:
pof said:
If you don't want to install automatically, or for some reason the process doesn't work for you, here are the manual instructions:
Transfer SSPL/SSPL-TRIN.exe to your phone and run it
Tri-color screen will appear
Disable activesync (file -> connection settings -> uncheck "allow USB connections")
Connect your phone to your computer using the USB lead.
Run RUU/ROMUpgradeUtility.exe
Follow the flashing process (Check the "I understand..." and "I completed..." boxes and update!)
Allow your phone to reboot.
Transfer TRIN_Unlock_v1.exe program to your phone and run it
Click the Unlock Button, select unlock option. Select if you want SIM/CID unlock.
Click "Unlock!" and wait until process finishes.
When done, turn off your phone for 10 seconds and reboot after that.
Click to expand...
Click to collapse
I'll get the same Error, ERROR [302]
What goes wrong?? Everything goes like it should, but when I click on Update I get the Error [302]
*dutch:
ik kom uit het gezellige brabant Weet je toevallig ook hoe ik de sim-lock kan verwijderen?

Topic can be closed. I have superCID, no SimLock anymore and a cooked WM6 on it!
*Markos loves xda-dev

Error 270

Hi everyone!
I've got a big problem. I Flashed my 3600 (Swisscom version XPA v1510) with Karmba's WM6 in en. 3 Days later i want to flash a ger version. then it has a failure. since then, ever when i want to flash something (wm5, HTC wm6 lit, bepe etc. cid unlock crashproof spl etc.) it goes to 1% or by cid to 7% then my trinity goes black screen, i hear the "usb connection lost" sound on my pc and the RUU says error 270 update error, the image file is corrupt. i loaded down the files several times, on my loc. HD, ext HD, SD card... nothing works. when i turn on my phon normally, the htc screen appears wit a swisscom label at the bottom, with some numbers and then... nothing. i can't do anything. i only can start it in bootlader mod with a key combination... i need my phone, so i need help please! i've seen, when i put in my mini sd and start the bootloader, before the 3 color screen appears, it says "loading" can i eventually flash from the card? i'm really despaired... plz help!
tnx and greetz!

just had the same problem on my trinity. rom upgrade wouldnt go further than 1%, giving me an error 270 on the flashtool on windows after this one percent.
try: splxploit (use forums search).
go into boot loader (camera + power on), close wescomm (or something like that) and rapimgr on windows via taskmanager and start unbrick.bat. after that flash "Hard-SPL". and after that use the rom you like ...
worked for me. good luck.

what u described, i tryed several times. it never works, in 25 tryis the xploit worked 2 times. after that the hard spl goes to 2 or 7 % and then the same... but now i've tryed what u said, with deactivate this 2 ****ing tasks ^^ and look there, it worked! tnx very much! before, i loaded every file from this ftp server wich might help, but there were only 2 tasks... thanks again and have an nice evening! greetz

hehe, glad to hear ...
btw. the problem occurred to me too, when flashing form an english version to a german one. at first it flashed to 20% or so and then disconnected - dropping the phone back to the colored bootloaderscreen. the flashing tool wanted me to follow some steps, which i did, and tried to flash the phone again. and there this 1% disconnect started to happen each time i wanted to flash - independent of the rom i used. after following the steps mentioned above the whole process worked fine again.

Error 270 mean bootloader must be updated.
Search for hard spl on wiki

bootloader? i can update nothing, block at 1% image update. I have the same Version like Blade Hunter, HSPL-1.07.0000
But now i cannot update mit Oli's Hard-SPL, same error. I make it over XP with the automatic installation of Hard-SPL.
Somebody nows an other update methode how works. At the moment i can do nothing with my mobile, like Blade Hunter.

ok, works again after flash with splxploit:
http://forum.xda-developers.com/showthread.php?t=308691
The basic Probleme was the old version of Hard-SPL: TRIN100
SPL-1.07.0000

Perfect!
Hi guys!
I had the exact same problem Blade Hunter described (also with with Karmba's WM6)! I was able to solve the proble by killing the 2 windows tasks that control de usb/activesyn (wcescom & rapiXXX) and using the unbrick tool!
I have successfully unbricked my trinity and flashed a new rom.
Great pda, great xda-dev community!
Flaneur

I have the same problem with my Touch. I am trying to install the following
[WM 6.1] NEW BLUE ELVES ROM V5.0 - CE OS 5.2.2021 (BUILD 19521.1.1.0) (8MB PAGEPOOL)
When The device gets the 3% it shows the following message:
Image FIle is Corrupted. PLease check your update utility.
Anyone could please help me? My device is a HTC Touch with 128/256MB. Thanks for all!

chalid said:
just had the same problem on my trinity. Rom upgrade wouldnt go further than 1%, giving me an error 270 on the flashtool on windows after this one percent.
Try: Splxploit (use forums search).
Go into boot loader (camera + power on), close wescomm (or something like that) and rapimgr on windows via taskmanager and start unbrick.bat. After that flash "hard-spl". And after that use the rom you like ...
Worked for me. Good luck.
Click to expand...
Click to collapse
good bles you

Blade Hunter said:
what u described, i tryed several times. it never works, in 25 tryis the xploit worked 2 times. after that the hard spl goes to 2 or 7 % and then the same... but now i've tryed what u said, with deactivate this 2 ****ing tasks ^^ and look there, it worked! tnx very much! before, i loaded every file from this ftp server wich might help, but there were only 2 tasks... thanks again and have an nice evening! greetz
Click to expand...
Click to collapse
sorry can you describe the exact passage and how you have resolved? i am in the same situation of your girst post...but not understand how to resolve..i ve try to kill the two task, and splxplit work fine and flash the hardspl 1.20 but when i try to flash original rom from PC with windows XP.. it start and load to 13% and stop (not reboot, not errore message) nothing.... if i try to flash only a radio rom it load to 7% and reboot with error message 270 image corrupt..
i am very disperate....
helpppppp!!!!!!
regards

I have the same problem but on my SHadow. I can' t do anything. Help me.

I have the problem,too.
When i run unbrick.bat I Get that picture.
How can I resolve problem?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hi,
had the same problem and with the help of you guys I could fix it.
Just for everyone who could not fix it a short summary:
1. To be sure, do all the stuff on a Windows XP machine
2. DISABLE "Allow USB Connection" in Active Sync so you see a small red X symbol next to the Active Sync symbol
3. Start the device into Bootloader mode (Cam+Power+Reset) and connect the device to your PC and make sure USB is written on the bottom of your screen (NOT Serial!)
4. Download splxploit (http://forum.xda-developers.com/attachment.php?attachmentid=39770&d=1180043588) and execute unlock on your PC
5. Follow the instructions
6. Download HardSPL (http://forum.xda-developers.com/attachment.php?attachmentid=45018&d=1185364317) and follow the instructions
7. Finally (to be sure) restart into Bootloader mode and check if SPL is showing "SPL-1.30.Olipro) - if this is the case you've done it !
8. Flash your preferred ROM via miniSD or USB connection
Hopefully this should be clear to everyone
Cheers

Try using/buy better USB cable. Cable with Ferrite core is recommended. Happened to me once.
Hope thet help.

FACEOFF!
Thanks a lot ... you saved my day!

Chalid,
Hey man, Thanks for this info! I have been pulling my hair out over this phone for ages, finally the info you've given has been the breakthrough I needed! God bless!!

Flashed another device´s ROM into Rhodium and bricked :(

Hi,
A friend has a CDMA Sprint Rhodium, and he tried to install with a Raphael ROM into Rhodium and since that device won´t turn on.
When connected to PC turns the led in red and it says "Qualcomm CDMA MSM driver needed" but nothing happens...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is there anything I can do to help him? or device can´t be repared?
Any advice is welcome
Thanks in advance,

i think you should contact jockie

Thanks for the advice, I´ll contact him.

Can he get the phone into the bootloader ?
Not sure that driver message is connected with the problem though, when you turn on a GSM Rhodium connected to the computer it normally wants a CDMA driver.

well, if the device is making a connection with the computer, then it's turning on. it may not be displaying anything, but at least you know it's still working. so, remove any SD card you may have and if you have a SIM card, remove it (i believe you said CDMA, but you are in the GSM forum, so...) Now, this will take some dexterity. first, remove the battery. Now, while depressing the volume down key slip the battery into the phone and quickly press and release the power key while still holding down the volume down key. either instantly or within a few seconds you should get the tri color screen. once this occurs, try hooking the phone back into your PC and running a custom ROM that is for the proper make and carrier style

guys, hes not a newbie, and knows about bootloader mode
this case isnt regular, so i advised a man who can really help with it, as i got help in similar situation

The "Qualcomm CDMA" driver installation comes up on your PC even on GSM phones.

try to download this driver from internet, it's for windows xp
then inter the bootloader and flash the original rom

hehe, the problem is not in drivers, drivers isnt a problem, you can use practically any qualcomm device driver (e.g. motorola Q)
the htc usb interface cant be found here (htc usb sync)

Can you get into bootloader screen or wont that even come up? If it does best thing would be to put a stock rom on an Sd card and flash from there.

I guess this is the problem that Nykoon had few days ago.
See, the phone has Raphael's bootloader. The CPU aren't the same (MSM7200A vs 7201A), nor the rest of the board. The bootloader can't make USB sync, so it somehow probably goes into some failsafe bootloader... but without proper files from HTC it can't be recovered.
Maybe jockyw can do something about it, but all at all - JTAG will work fine.
For all - that device doesn't go even to bootloader probably. If it went into bootloader, you would see at least HTC USB Sync (or microsoft usb sync). We tried with Nykoon on ICQ many things, but no way of flashing anything on it.

Thanks a lot guys, with your guidance we were able to bring it alive!!!
Thanks a lot to all
-----------
Vote, check my sig!

Hi, can you help me please, i have 1 with the same problem, please help me to flash the device, thanks in advanced

orb3000 said:
Thanks a lot guys, with your guidance we were able to bring it alive!!!
Thanks a lot to all
-----------
Vote, check my sig!
Click to expand...
Click to collapse
Please post the solution.
May help others in the future.

this has happen twice to me, fixed both times
all you got to do is put it in bootloader Mode (hold down vol down and push power button) then go to att, or tmobile .com and download the original factory ROM, (with original .exe) load it and the phone works perfect, then you can load any custom rom you want after that
for some reason, over time, with all the flashing, files just don't transfer correctly, one file here, one file there, and it takes the original factory ROM built by IN-HOUSE team at Phone Carrier. and not the made in the basement
Roms we have on here, I have flashed all of them, and love Energy, but for
some reason, Agent47 Valkarie roms, usually after some use, make my phone
Brick and lock and all kind of stuff, but reload ATT factory exe rom and Re-Flash
with NRG and thats it,
let me know how it works out

[Q] Stuck in cyclic restart after Radio ROM upgrade!?!

Hi, i am from Turkey,
I have a Touch Diamond (Diam100) bought from Norway. I just loaded a new radio ROM onto my phone (I am security unlocked and sim unlocked and hard SPL'd, thanks to Olinex!) and everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load
However - it is completely stuck in a cyclic reboot. I get the HTC startup screen and then it just reboots again and again. I tried a hard reset and got the confirmation message that it was restored OK, press volume up to boot. However it does the same reboot again and again
I tried some thing like that:
*Try to install "RUU_Diamond_HTC_NOR_1.93.409.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship" stock rom, but it freezes at %13
*Try to install stock radio rom "Diamond_Radio_1.00.25.05" bu it freezes at %95!
*Try to install stock spl, everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load but the problem seems again!
i can install cooked roms, but after restart this problem happens again and again!
Can you help me please? I love my phone very much.. (
(sorry for my poor english)

Hi, try MTTY your phone. log in to use search in these fora and find "The definitive MTTY thread". It's a bit of...homework to do but will get you out of this.Your issue is caused by certain undeleted items which remain after a rom flash as far as i've learned.I hadn't have to do it until after several ROM flashes but guess sooner or later everybody faces it.Well it's time you did it too...
Cheers

[email protected] said:
Hi, try MTTY your phone. log in to use search in these fora and find "The definitive MTTY thread". It's a bit of...homework to do but will get you out of this.Your issue is caused by certain undeleted items which remain after a rom flash as far as i've learned.I hadn't have to do it until after several ROM flashes but guess sooner or later everybody faces it.Well it's time you did it too...
Cheers
Click to expand...
Click to collapse
hi, i tried it step by step. but nothing happens

Hi,
Dude, that's frustrating, however as i understand it's a stock SPL you've presently got on your phone, right? I don't know which SPL version you've had before but just in case, try to update to HSPL version 1,93. Then try flashing a ROM you like.If problems persist MTTY your phone again after having upgraded HSPL.
And a word of advice based on own experience: Not all radios are compatible with all ROMs and vice versa...
Hope you're soon going to get this right,
Regards from Greece

merinos said:
Hi, i am from Turkey,
I have a Touch Diamond (Diam100) bought from Norway. I just loaded a new radio ROM onto my phone (I am security unlocked and sim unlocked and hard SPL'd, thanks to Olinex!) and everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load
However - it is completely stuck in a cyclic reboot. I get the HTC startup screen and then it just reboots again and again. I tried a hard reset and got the confirmation message that it was restored OK, press volume up to boot. However it does the same reboot again and again
I tried some thing like that:
*Try to install "RUU_Diamond_HTC_NOR_1.93.409.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship" stock rom, but it freezes at %13
*Try to install stock radio rom "Diamond_Radio_1.00.25.05" bu it freezes at %95!
*Try to install stock spl, everything looked to work fine, the status bar got to 100% and the phone rebooted as usual after a new ROM load but the problem seems again!
i can install cooked roms, but after restart this problem happens again and again!
Can you help me please? I love my phone very much.. (
(sorry for my poor english)
Click to expand...
Click to collapse
before you upgrade the radio, whether it has been unlock device with the XDA Unlock Application ..? try to hard reset your device after that make sure the device go to the boot loader (3 colors screen) and reflash with the official ROM!! then unlock the device and immediately you can do to upgrade the radio (at the time of upgrading the radio make sure the SIM card removed)

[email protected] said:
Hi,
Dude, that's frustrating, however as i understand it's a stock SPL you've presently got on your phone, right? I don't know which SPL version you've had before but just in case, try to update to HSPL version 1,93. Then try flashing a ROM you like.If problems persist MTTY your phone again after having upgraded HSPL.
And a word of advice based on own experience: Not all radios are compatible with all ROMs and vice versa...
Hope you're soon going to get this right,
Regards from Greece
Click to expand...
Click to collapse
hi, i can not change the hspl, i tried again and again, but nothing changed.
(hspl olinex 1.93 signed and unsigned versions)
i tried to change the hspl to stock spl, installation was going and everything was ok (%100 inst.) but after restart, spl 1.40 olinex in bootloader mode again!
i don't know how can i change this 1.40 spl. i think the main problem is spl and radio rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hakim Rahman said:
before you upgrade the radio, whether it has been unlock device with the XDA Unlock Application ..? try to hard reset your device after that make sure the device go to the boot loader (3 colors screen) and reflash with the official ROM!! then unlock the device and immediately you can do to upgrade the radio (at the time of upgrading the radio make sure the SIM card removed)
Click to expand...
Click to collapse
hi, my device is security unlocked, and hspl version is olinex 1.40.
i can not acsess to os, it just stay in the touch diamond screen .
thanks for the solution.

merinos said:
hi, my device is security unlocked, and hspl version is olinex 1.40.
i can not acsess to os, it just stay in the touch diamond screen .
thanks for the solution.
Click to expand...
Click to collapse
you have to do is to Hard Reset your device and reFlash