Hi,
I wonder if anyone knows how to change the registry to have "Letter recognizer" instead "Keyboard" after a sofreset by default in the input panel.
Many thanks
Bye
If I remember correctly there's a utility called EasyTweak from www.10gsoft.com that will do this - a utility that I heartily recommend
Many thanks,
I will try this afternoon
Bye
Hi again,
All OK (a good software)
Bye
Could someone please post a picture of the standard dialer in the Kaiser?
Here's a picture of mine:
Thank you.
This is the default WM6 dialer (not sure whether it has smartdialing enabled, but usually it does). You can try switching to the HTC dialer with KaiserTweak, but that might not work (if the dialer images are not on the phone). If it doesn't work - just revert back using KaiserTweak to the WM6 dialer . Personally I prefer this dialer with smartdialing because the contacts that were dialed before show up first when dialing a name...
Also - I think schap has a dialer too - something called reTouched or so. But I didn't try it...
Thank you
But I will need a dialer with local language support.
This is not the default WM6 dialer, This is the default WM5 dialer...
I was told the same in a local forum
The question is, which dialer can I install that will support other languages?
Another option would be to customize the skin of a dialer that I like and will fit the Tilt. In this case, can anyone point me to the exact steps required to do so?
Thank you.
Don't know about localizing. Regarding whether it's the WM5 or WM6 dialer, what's the difference? When I look at the screen it looks exactly the same as the dialer on my Kaiser (WM6) when I turn of the HTC dialer (using the reg-tweak or KaiserTweak).
Regards,
Nika.
Nika, could you please expand on that?
nikagl said:
When I look at the screen it looks exactly the same as the dialer on my Kaiser (WM6) when I turn of the HTC dialer (using the reg-tweak or KaiserTweak).
Regards,
Nika.
Click to expand...
Click to collapse
I use EZDIAL on my Tilt, and I had the default smart dialing turned on.
This resulted in the EZDIAL serch results being obscured by the smart dialing popup window (which basically emulates what EZDIAL does, only with a nicer presentation).
I then turned off smart dialing, and can now see the EZDIAL results on screen.
But the thing is, I wanted to use a nicer smart dialer than EZDIAL, and tried to install a localized one posted in a local forum by Nadavi (a distinguished member here), and it didn't work.
So I wanted to understand why this was happening, and was told that my Tilt couldn't have any other dialer than the default one (since I'm with the standard ROM, and I need a localized skin).
nikagl said:
Don't know about localizing. Regarding whether it's the WM5 or WM6 dialer, what's the difference? When I look at the screen it looks exactly the same as the dialer on my Kaiser (WM6) when I turn of the HTC dialer (using the reg-tweak or KaiserTweak).
Regards,
Nika.
Click to expand...
Click to collapse
its because you have a tilt as well.
original microsoft wm6 dialer:
original microsoft wm5 dialer:
HTC dilaer:
Does anyone know how to switch from the HTC dialer to the standard WM6 one?
The HTC dialer does not have soft 'Talk' and 'End' buttons, which I find very annoying...
What do you mean?
elivne said:
its because you have a tilt as well.
Click to expand...
Click to collapse
And I second the question regarding the ability to switch between the dialers.
Blacksheep said:
Does anyone know how to switch from the HTC dialer to the standard WM6 one?
The HTC dialer does not have soft 'Talk' and 'End' buttons, which I find very annoying...
Click to expand...
Click to collapse
Download KaiserTweak, copy KaiserTweak to your machine, Download the latest XML, copy that to your machine too, and use KaiserTweak to switch between the dialers...
Regards,
Nika.
elivne said:
its because you have a tilt as well.
original microsoft wm6 dialer:
original microsoft wm5 dialer:
HTC dilaer:
Click to expand...
Click to collapse
How can i change to HTC dilaer??? As on the second picture???
ze bediuk ma she shaalti oto...
That's the question...
As I replayed before:
I suggest the following:
1. find a full install of the dialer(I don't know of any).
2. change your rom to an HTC rom(much better! ))
3. find an answer at XDA....
wisniak, I replayed your question on ppcfreak.
Quickest way to the Dialer
This may be a silly question, but without opening the keyboard, what is the quickest way to get the dialer to appear on the screen?
emmit said:
This may be a silly question, but without opening the keyboard, what is the quickest way to get the dialer to appear on the screen?
Click to expand...
Click to collapse
Try Pressing the Green Call button on your device, that should bring up the dialer.
To change to the default WM6 dialer, which is actually listed above as the 2nd HTC dialer. Here is the registry key that needs changed:
HKEY_LOCAL_MACHINE / Security / Phone / Skin
Change the value of 'Enabled' from 1 to 0
Please note, that there is no video calling available using this dialer.
Just thought I would clarify a little bit on what these dialers actually are:
At&t WM6 Dialer:
HTC Touch style dialer:
Default Microsoft WM6 dialer:
Default Microsoft WM5 dialer:
I used Kaiser Tweak and the dialer definitely looks different now
I'll post an image later today.
njmarchetti said:
Just thought I would clarify a little bit on what these dialers actually are:
At&t WM6 Dialer:
Default Microsoft WM6 dialer:
Click to expand...
Click to collapse
Dude, you are absolutely wrong,
The first is the built in WM6 dialer, available on every WM6 phone edition (you can unhide it with a tweak manager) - all WM^ phone editions have it(never mind the colors)
The secound is the "smartdialing" HTC dialer - available only on HTC phone editions devices,(never mind the colors)
Here's what it looks now:
This is the dialer skin I have after using the Kaiser Tweak.
EZDIAL does not come up, even though it's properly installed.
im just trying to figure something oout but in need some help from you guys here.
what writes this key? "HKLM\System\GDI\Rotation"
my windows mobile knowledge is quite low so i have absolutly no clue where to start.
is some sort of driver or app?
is it WM itself by checkign some predefined HW address??
i could use some help here
HKLM\System\GDI\Rotation\HideOrientationUI usage
Hy achmed20
Im new in this site but will answear your question... also if it is a little bit late
I'm using an HTC HD2 with WM 6.5:
If you set the key HKLM\System\GDI\Rotation\HideOrientationUI from default 1 to 0, this happens:
Go to Setings --> Menue --> More --> System --> Screen
There will be a Tab, where you can set the Screen for Landscape or Portrait
Take care about this settings! On my HTC HD2 Manila (also called TouchFlo3D or Sense) can't be shown at Landscape!
I hope I could help you =)
Greetings from Switzerland
Zekke1980
Hello
I am currently cooking a ROM Fr WM6.1 but I can not define FingerKeyboard as the default keyboard. Ditto for FileExplorer, I wish TotalCommander default.
I guess anything goes in the reg but I don't even know where!
Last question, I don't know how to arrange the Start Menu before cooking.
Thank you in advance for any clue that the welcome
How do I get SMS-Chat (Vito technology) to become the default SMS application? so even if i click on a message that shows up in Manila2d it will open that app. I know there is a work around because they did it for thumbcal
still looking for a fix if anyone has one...
hi guys
You must have a registry editor!
go to:
HKLM\Software\Microsoft\Shell\Rai\:MSINBOX (original tmail.exe)
in the string "1" write "\Program File\VITO\SMS-Chat\SMSChat.exe"
the soft-reset your device
if is not working try to remove the quote both end.hope this help
I tried this already without the quotes...apparently this fix is for mobile shell 3 and not manilla 2d