Related
I'm using iGuidance 3.0.1 for navigation, and it has a known bug that it will not start if you have an active data connection. At the moment I have to tap the 3g icon, disconnect the data, and quickly start iGuidance. Either this or turn off direct push so there isn't a data connection to begin with.
Anyone have any idea on how to have a one tap solution? I haven't done any automation type setups since DOS batch files, so I'm at a loss.
Hi.
Disable the connections before start the other program....
danielherrero said:
Hi.
Disable the connections before start the other program....
Click to expand...
Click to collapse
Thats what I'm saying I have to do at the moment. I'm hoping there is a way to close the connection and start iGuidance all at the same time.
chop69 said:
I'm using iGuidance 3.0.1 for navigation, and it has a known bug that it will not start if you have an active data connection. At the moment I have to tap the 3g icon, disconnect the data, and quickly start iGuidance. Either this or turn off direct push so there isn't a data connection to begin with.
Anyone have any idea on how to have a one tap solution? I haven't done any automation type setups since DOS batch files, so I'm at a loss.
Click to expand...
Click to collapse
You can use MortScript.
There's a command called "Disconnect" which will do just that. Then you can use the Run() command to run iguidance.
I am going to do it myself once I get a few minutes. Will post it then.
Okay. Here it is (attached).
Remvoe the line that prepends "Storage Card" if your app is not located there but in main memory of the device.
That works like a champ.
Thank you so much
Hello,
I bought a brand new 'HTC - Kaiser' (precisely a 'HTC - TyTN II' directly from Orange in France), in order to replace my old 'HTC - Hermes'.
First, I was surprised not to see a GPS option in the 'Communication Manager'. As you can switch ON/OFF wifi or bluetooth, you should be able to switch ON/OFF the GPS, isn't it ?
Secondly, I installed Tomtom v6.032 on my PPC, but I could not get any signal at all. I went in the options, and tried with all GPS option devices, with no success.
With 'Built-in GPS receiver' and 'Other NMEA GPS receiver' options, I always have "No valid GPS signal !". Do I have to start GPS somewhere on my PPC before starting TomTom ?
Thirdly, I looked for help on xda-developers.com here: http://forum.xda-developers.com/showpost.php?p=1735972&postcount=112
I followed his recommendations, I changed:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\GPS Intermediate Driver\Drivers\GPSOnePort]
"CommPort"="COM1:" (instead of: "COM0:")
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\GPS Intermediate Driver\Multiplexer]
"DriverInterface"="COM0:" (instead of "COM4:"
And it after this I could have some signal. But then after shutting down Tomtom and reopen or after a soft reset, it does not work any more, at all ! What happens ? I don't understand.
Why my GPS just not work out of the box ?
Please help ! I switch to the Kaiser for the GPS feature, and it does not work :'(
I tried all my test outside with a clear weather, waiting for about 3 minutes each time.
it should work right out of the box.
for me (i have a tilt) gps is on com4. i use tomtom and you have to make sure the correct com port.
I could be wrong but I believe that in tomtom if you get the message "no valid GPS signal" that actually means every thing is set up correctly. you just need to wait, could take some time. tomtom starts the gps itself. watch the leds on the phone. when GPS is on the right LED will flash.
you may want to check out some other programs. tomtom does seem to take a little longer to get a fix in my opinion.
BTW check out my signature, you can use navizon and make some money once you get that gps working
There's no seperate GPS connection. The GPS just uses your data connection. If you can connect to 3G, then your GPS will also work. Try using Google Maps and clicking "Use GPS", leave your phone in one spot for a few minutes and see if you can get some sattelites that way.
As always, someome smarter can correct me if I'm wrong, but this is from my experience.
There is no way to "turn on" gps, programs access it when they need it, and it's off when they don't
Your first fix can take up to 45 minutes, although min eonly took about 5.
If you look in the extracted HTC cabs threads, you can find a program called "HTC GPS tool" Run this and select "clear memory" as the option, and that'll get a fix after a while. after that, After soft resets you should use "cold start", I think...
After this has fgot a fix you can use other programs on the COM4 channel.
Hope this helps
I have had my Tilt for about 2 months. Recently, I took a trip from L.A. to N.Y.C. As soon as I got to NYC, I ran QuickGPS, but was entirely unable to get GPS to work at all during the week I was there (queens, manhattan, roads, etc).
I posted an inquiry about backing up and hard resets. Rather than getting an answer to the question, I was given direction to make sure my GPS really didn't work.
That chain pushed me to GPS Test v1.04 by Chartcross. It is free, and can found on the web and on this forum. In NY I could not get a signal no matter what even running it.
When I landed in LA I ran it again ... it stayed at "Starting Up" for a while, but then miraculously started showing bars.
So --- I recommend that you (1) run Quick GPS, (2) install this program, and (3) let it run and run and run. Also make sure you are in an area where GPS is accessible.
It can take a very long time to get GPS to work on the tilt. Many times, it takes longer to find a signal than the trip you were hoping to TomTom through. Its the nature of the beast.
chris247 said:
I tried all my test outside with a clear weather, waiting for about 3 minutes each time.
Click to expand...
Click to collapse
Yep, like all the others have said leave it fore longer. 3 mins isn't enough time. If after 30-45mins of being left in one place (no moving it around!) with a clear view of the sky for the first time and TomTom is still saying "No valid GPS signal" then start worrying...
Thank for your enthusiasm. I carefully read your post, here is want I discovered:
You mentionned about having a 3G data connection. First I was wondering why do you talked about that: this as nothing to do with GPS. Then I thought I should give it a try. Up to now, I haven't yet put my SIM card in my brand new 'HTC - Kaiser'. I didn't mention it in my 1st post, as I though it could not have a link with my GPS problem. I put the SIM card in the phone, then started Tomtom, I was surprised to see that a 3G data connection was automatically started, and a few seconds later, the GPS worked perfectly.
I can't believe it, I could not have the GPS working because there was no SIM card in my phone !
First I thought that the data connection was for retrieving Tomtom traffic info online, but then I discoved that even with 'HTC - GPS Tool v1.1.1.0', a 3G data connection is started prior to getting my localization.
I read about QuickGPS, and learnt that it is the thing that causes the 3G data connection to start prior to getting my localization.
Why is QuickGPS starting automatically ? Is QuickGPS compulsory for localization ? Can I stop this behavior and have everything running through GPS ?
Chris
MAYBE IF YOU TR THIS ONE
I HAD THE SAME PROBLEM AND IT WORKED FOR ME
JUST ASSIGN THE INCOMING PORT TO COM4, AND OUTGOING VIRTUAL COM5
http://www.plunder.com/GPSGate-download-37727.htm
GPS and 3G have nothing to do with each other. They are too completely different things.
GPS does not need 3G to function!
Some GPS programs (like google maps), do require a internet connection to download data, thats when 3G comes in (not necessary, could use wifi and gprs instead).
What is strange is that in Orange ROM (at least in France), a GPRS connection is made automatically each time you want to use your GPS. If the GPRS connection is NOT successful, you can not use the GPS (with tomtom, or any other testing GPS tool). How can I change this behavior ? I do not have an unlimited GPRS subscription !
chris247 said:
What is strange is that in Orange ROM (at least in France), a GPRS connection is made automatically each time you want to use your GPS. If the GPRS connection is NOT successful, you can not use the GPS (with tomtom, or any other testing GPS tool). How can I change this behavior ? I do not have an unlimited GPRS subscription !
Click to expand...
Click to collapse
It's required GPRS connection because you might have selected tomtom plus services such as Traffic, Weather. Just to be sure, take out your SIM or turn off the radio to see what happen. BTW, flash a different ROM is another choice.
Did you installed Google Navigator as my Kaisers GPS unit stopped to work after i installed GN?
On Orange ROM (in France), everytime you want to get GPS, you first have to connect to the Internet. It is not link with TomTom Plus, because even with HTC GPS tool software, you need to let the phone automatically connect to the Orange network prior to getting your location with the GPS. If you do NOT have a SIM card and the possibility to connect online with your phone, you get NO GPS location.
Please, help
chris247 said:
On Orange ROM (in France), everytime you want to get GPS, you first have to connect to the Internet. It is not link with TomTom Plus, because even with HTC GPS tool software, you need to let the phone automatically connect to the Orange network prior to getting your location with the GPS. If you do NOT have a SIM card and the possibility to connect online with your phone, you get NO GPS location.
Please, help
Click to expand...
Click to collapse
As NGHIEM said above, flash a new ROM and this behaviour will stop. Try Duttys or Schaps for best stability etc.
I am using an AT&T Tilt with Garmin Mobile XT and there is an option to turn off Internet Data (Traffic, weather, etc.) in Garmin. If I want to use the GPS with no radios on I have to disable the Internet Data option otherwise the program tries to make that connection first and never acquires a fix. That may be part of your problem. I also just tried the HTC GPS Tool with no SIM card in flight mode and it got a fix in under 2 minutes inside my house by a window. Garmin also started fine. The GPS is an independent receiver and should require no other data. It appears that some other program is starting along with the GPS and trying to access the Internet. Like others have said before you can probably solve your problem by flashing a new rom.
I think I have found the solution:
- In the registry change:
[HKEY_LOCAL_MACHINE\Software\HTC\SUPL AGPS]
"EnableAGPS"=0 (instead of: 1)
Now everytime I use my GPS (with HTC GPS Tool, or Tomtom), the automatic GPRS connection is not started !
Please give your feedback about this.
Que_EN_Unlock_All_.zip file
Hi,
I am looking for this file to do the Garmin mobile XT installation. This file, Que_EN_Unlock_All_.zip, is not available at rapidshare.
Can you help please?
Regards.
Pieter
pvblomm said:
Hi,
I am looking for this file to do the Garmin mobile XT installation. This file, Que_EN_Unlock_All_.zip, is not available at rapidshare.
Can you help please?
Regards.
Pieter
Click to expand...
Click to collapse
What is this file about ?
I've searched and searched but couldn't find it (only references to it in other ROMs). Could someone either please post the HTC GPS Tool.cab or point me in the right direction as to where I can find it?
I know it's in a couple of ROM releases, but I'm happy with what I have now and just want that file.
Thanks, guys!
EDIT: Nevermind, guys. I found it. Thanks!
No card is found
I have installed TomTom on my new Kaiser and downloaded the free citymap, but when I then run TomTom it says: No card is found. What am I doing wrong?
Ok I successfully installed TT6 on my Kaiser, which currently runs dutty 3/8 rom and niki radio. I have Kaiser Tweak installed as well. Everytime I open TomTom it wants to connect to GPRS. From my previous experience when GPRS is transferring data it uses MB's, which I am charged for because i do not have any data plan, nor do I want one because I am usually in hotspots. In addition, I have quick gps, gps test, and gps tool, applications installed on my device.
I was able to get a connection yesterday without using GPRS. For some reason I clicked on Traffic Updates in the configuration. Now everytime i connect to TT6 it opens the GPRS connection. When I hit cancel with GPRS I cannot establish a GPS signal.
Will I be charged for GPRS connection if data is transferred if so, how do i use my TT6 application to avoid any service fees or any transfers that will costs me money.
edit1: I also tried disabling my traffic updates however no success
edit2: i have my own software with all maps. I did not dl any of the tomtom6 software featured in this forum so this issue may be different. In addition, i searched this similar problem with confusing results.
Did you try disabling traffic updates? That is what is connecting...
yes i did...
this shouldn't be a difficult thing to answer for those who don't use any type of data connection (medianet, gprs, 3g etc) and use gps.
go into tomtom plus services and disable wireless data, if that doesnt work, and since you are a legal user of tomtom, then why dont you contact their tech support, that's what they are there for
redbandana said:
Ok I successfully installed TT6 on my Kaiser, which currently runs dutty 3/8 rom and niki radio. I have Kaiser Tweak installed as well. Everytime I open TomTom it wants to connect to GPRS. From my previous experience when GPRS is transferring data it uses MB's, which I am charged for because i do not have any data plan, nor do I want one because I am usually in hotspots. In addition, I have quick gps, gps test, and gps tool, applications installed on my device.
I was able to get a connection yesterday without using GPRS. For some reason I clicked on Traffic Updates in the configuration. Now everytime i connect to TT6 it opens the GPRS connection. When I hit cancel with GPRS I cannot establish a GPS signal.
Will I be charged for GPRS connection if data is transferred if so, how do i use my TT6 application to avoid any service fees or any transfers that will costs me money.
edit1: I also tried disabling my traffic updates however no success
edit2: i have my own software with all maps. I did not dl any of the tomtom6 software featured in this forum so this issue may be different. In addition, i searched this similar problem with confusing results.
Click to expand...
Click to collapse
You can you the program NoData http://forum.xda-developers.com/showpost.php?p=1325870&postcount=7 to disable GPRS traffic.
thanks i'll look into the "no data" application.
hmmm but i can do the same thing with kaiser tweak, however tomtom cannot establish a signal.
Another thing to check is taht A-GPS is DISABLED,if not it will try to get GPS fixes via cellsites and download the sat data as well whenever the GPS is activated.
Good Luck
Ashley
AshleySear said:
Another thing to check is taht A-GPS is DISABLED,if not it will try to get GPS fixes via cellsites and download the sat data as well whenever the GPS is activated.
Good Luck
Ashley
Click to expand...
Click to collapse
hmmm i have it enabled right now. so are you saying i should disable assisted gps?
AshleySear said:
Another thing to check is taht A-GPS is DISABLED,if not it will try to get GPS fixes via cellsites and download the sat data as well whenever the GPS is activated.
Good Luck
Ashley
Click to expand...
Click to collapse
i think u solved the issue. I'll let u know in a few hours but as i can see from bein indoors the gprs 3g connection isn't popping up. Thanks for everyones input. I figured there was an easy solution.
Ok that solved the issue of connecting to the net but now I cannot get a satelite signal anywhere in Boston.
You have to try out couple different things. First off, try a different version of tomtom. Do a search and should pop up with couple diffrernt versions. I can tell you that my version doesn't connect to data at all. Maybe the A-GPS option works, but you're not doing something correctly. There's a tomtom tutorial somewhere. Do a search for that. Verify COM4 or whatever com gps is on. Test out HTC GPS tool to see if you can pick up any satellites. Could possibly be the radio. Many different things you can try out here.
thomassster said:
You have to try out couple different things. First off, try a different version of tomtom. Do a search and should pop up with couple diffrernt versions. I can tell you that my version doesn't connect to data at all. Maybe the A-GPS option works, but you're not doing something correctly. There's a tomtom tutorial somewhere. Do a search for that. Verify COM4 or whatever com gps is on. Test out HTC GPS tool to see if you can pick up any satellites. Could possibly be the radio. Many different things you can try out here.
Click to expand...
Click to collapse
I understand however I have tried everything. It was working correctly previous to when I hit traffic updates. I tested everything and then reinstalled the program onto my device late last night. It previously worked with niki radio and dutty rom on com4 with almost all the bauds. The A-GPS system did not make it work and it also attempted to connect to the internet. When I try to run AGPS now it doesn't connect to the internet even with it enabled in Kaiser Tweak after a soft reset.
TomTom and WM 6.1
I just switched my ROM over to WM 6.1 ... tom tom looks like it is running fine, but the "check for updates" button under advanced features now just returns an error. Any thoughts? I have disabled my cingular proxy, so that should not be the problem.
weinson said:
I just switched my ROM over to WM 6.1 ... tom tom looks like it is running fine, but the "check for updates" button under advanced features now just returns an error. Any thoughts? I have disabled my cingular proxy, so that should not be the problem.
Click to expand...
Click to collapse
whatever you do try not to hit traffic updates. It complete f'd up my gps application, gprs, and my medianet is no longer working for what I can see. They are all enabled too, which makes this even more confusing now. Thinking about doing a hard reset cause I have back up of everything on my pc. Just don't want to be bothered with spending hours updating right now.
ok fixed going to have moderators remove this thread cause nothing usable came out of it.
redbandana said:
ok fixed going to have moderators remove this thread cause nothing usable came out of it.
Click to expand...
Click to collapse
Here's an idea: Share with the community, post what you did to fix the problem.
kyphur said:
Here's an idea: Share with the community, post what you did to fix the problem.
Click to expand...
Click to collapse
hear hear (esp since I may have the same issue)
Here's an idea: Share with the community, post what you did to fix the problem.
Click to expand...
Click to collapse
Yes You are correct and I apologize.
Ok, first I disabled agps and then was not able to get a signal anywhere.
2nd, I removed all TT6 Apps from my phone and TTHome from my PC
3rd, I Removed my SD card and any remaining applications or files that had anything to do with TT6 or the term "navigator" by using the file explorer.
4th, I moved the TT6 cab file to my device and ran it.
5th, I then formatted my SD card from my PC.
6th, Inserted the SD card back into the phone
7th, Moved the Navigator Application from the "Crack" file onto my SD card.
8th, Went into Program Files on my device and deleted the Navigator file that was there.
9th, Moved the Navigator application from the SD card to the navigator file on my device which would be under "program applications". I also moved the US and Canada Maps onto the device.
10th, I reinstalled TTHome onto my PC
11th, Connected Through active sync and set up the TT6 on my device using the appropriate baud and com4.
12th, After installing the updates from TTHome. I again removed TTHome application from my PC. Somehow, only running the updates once will allow the program to work. If I reconnect my device through active sync and TTHome is still installed I will be unable to use the application again on my phone because it will not get a signal if I reupdate.
I managed to install TT and set all the setting that I saw in a post somewhere but I can't get a GPS signal. When I'm in the TT "Show GPS status" menu it shows that it found a satellite but when I switch back to the map it says "Waiting for a valid GPS signal...". I tried doing it outside with no luck. It just wont get the signal. Any help?
well, i know you said you followed some settings, TT works fine on my TP, so here are my settings;
->set to internal gps
in Settings/ External GPS
-> gps program port = com4
-> no gps hardware port
-> under access, make it manage gps auto.
hope this helps,
That's how I set my preferences. How long did you have to wait the first time to get a signal? And did you stay in one place?
I read somewhere that you need to run HTC GPS Tool prior to running TomTOm for the first time. I don't know if that is necessary or not, TT7 works on mine, but it takes a good 4-5 minutes before it acquires satellites. Garmin acquires much faster and I have heard that TT6 is quicker as well.
well, all i did was install TT, and run it. i did use the agps program at first and my gps acquires satelites within 30secs or under ... it does tend to lag a little (yest when i was driving, when i reached the turn, it said i had 5metres to go, but when i made the turn, it recognized that i did, so it was a small error)
Well it still doesn't get the signal. Ill try it another time when its warmer so i don't have to put my phone on the window. If that doesn't work its bye bye TT and than its either GArmin of iGo
jaszek said:
Well it still doesn't get the signal. Ill try it another time when its warmer so i don't have to put my phone on the window. If that doesn't work its bye bye TT and than its either GArmin of iGo
Click to expand...
Click to collapse
Make sure QuickGPS is updated and try again. I have TT running and it works great. I also use Google Maps without any issues. Able to get a lock under 1 minute.
change rom and radio.
would I have to change the rom and radio If I have the original, HTC Factory rom and radio? Bought mine unlocked.
well im using a different rom and radio as well .. that could be why ...
works perfect
always update your QuickGps, mine does it in 4-5 seconds
jaszek said:
I managed to install TT and set all the setting that I saw in a post somewhere but I can't get a GPS signal. When I'm in the TT "Show GPS status" menu it shows that it found a satellite but when I switch back to the map it says "Waiting for a valid GPS signal...". I tried doing it outside with no luck. It just wont get the signal. Any help?
Click to expand...
Click to collapse
it happen to me, just reset
jaszek said:
I managed to install TT and set all the setting that I saw in a post somewhere but I can't get a GPS signal. When I'm in the TT "Show GPS status" menu it shows that it found a satellite but when I switch back to the map it says "Waiting for a valid GPS signal...". I tried doing it outside with no luck. It just wont get the signal. Any help?
Click to expand...
Click to collapse
I saw many answers but noone mentioned the AGPS.
If you see all blue bars once and it turns back/forward to grey/blue bars; then dissable AGPS.
I think I have also similar problem... Sometimes it works and usualy it works if I run also GoogleMaps but without this I get only 5-10 gray bars with strong signal but they do not come blue.
Is only ROM and Radio update cure?
iGo is not working, what should I do? It can get where i am.
edruig said:
iGo is not working, what should I do? It can get where i am.
Click to expand...
Click to collapse
If it knows where you are then it is working. Not sure what the problem is. I use TomTom with no problems but I know that many use iGo.
Chances are your gps settings are incorrect. Especially if you just flashed a new ROM.
Look for a program called GPSTest. Install it and run it on your phone. It'll automatically setup your dps device. Then start up iGo and go into the GPS settings and set it to the same settings, which for me is port 4 baud 9600. Then it should say GPS detected on top.
You may still not get a signal, but that's because it takes a while for the gps on the kaiser to get going for the first time. Let it run for 5+ minutes and eventually you'll catch a signal.
Thank you very much it helped me