What are possible causes for disconnections?
I've got Vista & official WM6 on Herald.
I noticed that when I pushed WiFi & Bluetooth button on notebook it happens more frequent..
Any clues?
Related
I jut encountered another Problem (which is severe in my opinion):
I connot connect to my Notebook over the active Sync Bluetooth Option.
It shows the Notebook, when searchning for it, bit Active Sync 4.0 doesn't seem to give the right service...
I am having this activesync problem also.
I can sync using the cradle. I tried setting up the connect via BT, but the BA is giving me a message : "Cannot find an existing Bluetooth partnership with a PC that supports Activesync. Would you like to set it up now?"
And i believe that i did set it up already.
my phone settings are:
under BT devices on my phone my computer is listed. under com ports i have Incoming com port 8.
my PC settings are
Devices : My phone
Options: all checked
COM ports: COM8 incoming
in MSActive sync 4.0:
connection settings: All checked ..."Allow connections to one of the following: COM8"
still cannot figure out what is wrong.
I am currently using WM5 and Activesync 4
When i was using WM03SE and Activesync 3.8 it was working fine.
same problem here
No way to create a synch connection via bluetooth.
It might be another MS bluetooth bug !
is this really not possible? I think this is a huge problem. Might rollback to 2003 until there is a fix.
ActiveSync w/BT okay here...
I can sync via BT without a problem.... it was a little strange on how the AS connection was created.
Anyway, I made sure my laptop was paired with the SX66. Started ActiveSync on the SX66, an clicked on ActiveSync via Bluetooth in the Menu. A screen popped up saying there were no valid BT connections and took me to the BT manager. I chose my laptop and an "Activesync Connection" was created... On the PC, I made sure to allow the proper COM port in AS (in my case, AS always used Com5 when using WM2003).
I didn't create and Incoming/Outgoing connection prior to the PDA prompting me, also deleted any existing partnerships on PDA and PC.
Sorry for the vagueness, this was one of the first things I tried after upgrading to WM5... I can try to answer any other questions. Good luck!
Just got it to work.
collowed chen's directions sort of.
I deleted existing partnerships on MS Activesync on PC and SX66.
I deleted existing pairing on Bluetooth devices under PC BT icon.
I enabled a comport under Bluetooth Devices/ COMPORTS for incoming.
I re-added the sx66 under bluetooth devices, set pass key, this time on my sx66 it listed "activesync" as one of the services offered.
Acknowledged everything on the SX66.
Then opened Active sync (at this point i still did not add the sx66 to activesync on my PC) on SX66.
Chose connect VIA BT under menu, and woila it asked if i wanted to create a partnership.
Now i am syncing via BT....i guess the difference between WM5 and wm03 is that with 03 i think i had to set it up via the cradle before BT.
does not work
i have tried all steps but it does not work
It depends on the PC's bluetooth stack. Anything else than Widcomm is problematic.
Hello!
Is"t possible get my kaiser and vista syncronization to bluetooth? That option have kaiser mobile phone but nothing happend when i activated that.
I want my kaiser syncronization when i put that my computer table, my second phone nokia do that automatically when i come closed my computer and i want same happend my kaiser.
Hi,
I managed to get my Kaiser syncing with Windows Mobile Device Center v6.1 and Windows Vista Home Premium.
I started to pair my laptop and my Kaiser first.
Further I went to Activesync on my Kaiser and there choosed to connect via Bluetooth.
That should be all!
Good luck
Funny, now i do everything again couple times and now it"s starting sync, i dont know what is problem before. Before it connect but not sync.
Is"t that sync possible make automatic when i coming close my computer? Some reg hack?
Hi all,
My HTC diamond that used to sync with active sync on win xp wont connect to my visat home premium laptop.
I've tried tweaking the firewall (even turning it off) and still no luck - both norton and windows firewall
Tried the dvmgmt.msc things too with no luck
Any other ideas??
anyone?
I found that problem too.
Go to task manager and close instances of mobile device centre and Windows Media as this seems to play havoc with USB sync.
Take your device off of the USB cable, fire up a fresh instance of WINMO device centre and it should detect it (after selecting 'ActiveSync' on your device).
Good luck
Jamie
what I have had to do is delete the diamond profile with out the diamond connected. restart your diamond then reconnect. I think it is a problem between activesynch in xp and winmo in vista. But I have kaiser which I use for work and I have no problems connecting to activesynch or winmo.. go figure...also if you have tasks selected it won't finish synching for some reason god knows why.......
Worked for me
Try going into the "USB to PC" settings on your phone and unchecking "Advanced Network Functionality". I couldn't connect in vista before disabling that.
Hello,
I've never managed to get my Diamond sync'd with my Vista laptop using a cable but if I use bluetooth then it always seems to connect so if you have bluetooth on your pc then i'd try that and see if it works.
I tried all the usual fixes including those listed above me and none of them worked. Then I read somewhere to uninstall device center go to microsoft and dl the latest version and then install it with the phone connected. That one worked.
How do you delete the profile? will I lose data doing so? same issue with my Touch Pro. uninstalled WMDC re-installed it. re-set all of the TP settings to factory(without restoring). Still doesn't work. Any other ideas?
Hi to all,
i've been facing quite annoying problem since i bought my topaz. BT connection to AS works ok, but when i want to connect my phone to pc via BT without launching AS, it says there was a problem connecting to device and it does not connect. Using Bluesoleil software on xp sp3.
In BT -> partnership settings wireless stereo, hands free and activesync is available. Any help?
Since I upgraded to Windows 7, I have been having a problem syncing my X1 with Windows Mobile Device Center over BT.
Everything works ok over USB first (Full sync), then I disconnect the cable.
Make BT "discoverable" on both computer and phone.
Open ActiveSync on the phone and choose "Connect via BT"
It says no device available and gives the option to pair with PC.
I do the pairing, both devices say pairing OK.
Then I choose "Connect via BT" again on the phone
The phone displays the usual:
1) Opening port
2) Connecting
3) Authenticated
In the end "Connected" is displayed as status.
With Win XP and ActiveSync 4.5 client that always meant - everything is OK, not so with Win 7.
On the PC:
Windows Mobile Device Center starts displaying "Connecting" (as soon as I press "Connect via Bluetooth" on the phone) and stays like that.
If I open "Bluetooth Devices" in my computer's BT settings and check the properties of "X1" I see that "Activesync" profile is checked.
What else can I do?
Additional info:
PC - Dell E6400 Win7 64bit
X1 ROM Agent_47 Valkyries 3.8.60TR
EDIT:
I got it working:
1) Deleted the relationship in ActiveSync (on X1) and WMDC (on the PC)
2) Deleted pairings form both devices in BT settings
3) Made the USB connection, got it syncing
4) Started the pairing in Activesync on the X1
5) Did not start the actual sync over BT instead restarted both PC and X1
6) After restart started Activesync on X1, it connected to PC and started syncing at last!
I'm still not sure that it will work tomorrow...
EDIT2:
Didn't even work after 5 minutes
Just disconnected and when trying to connect again... not working.
no problem for me on win 7
actually, when I had a problem with syncing over BT on Vista, I moved to Windows 7
You can try to completely remove Sync Center and WMDC or whatever could be removed, download installations from microsoft and try to reinstall. Don't forget to use windows update after reinstall. And remove all settings first, just for sure. Hope this will help you. It helped to me when my X1 suddenly stopped to syncing over BT on Vista.
apolas said:
no problem for me on win 7
actually, when I had a problem with syncing over BT on Vista, I moved to Windows 7
You can try to completely remove Sync Center and WMDC or whatever could be removed, download installations from microsoft and try to reinstall. Don't forget to use windows update after reinstall. And remove all settings first, just for sure. Hope this will help you. It helped to me when my X1 suddenly stopped to syncing over BT on Vista.
Click to expand...
Click to collapse
Could you please post how long it takes on your system from:
Pressing "Connect via Bluetooth" on X1
to
"Connected" displayed in Windows Mobile Device Center?
That is if you start WMDC first and then start connection from X1.
On my system it sometimes takes a very long time and sometimes it's instant. Could be a problem with BT drivers on my Dell.
Draqula said:
Could you please post how long it takes on your system from:
Pressing "Connect via Bluetooth" on X1
to
"Connected" displayed in Windows Mobile Device Center?
That is if you start WMDC first and then start connection from X1.
On my system it sometimes takes a very long time and sometimes it's instant. Could be a problem with BT drivers on my Dell.
Click to expand...
Click to collapse
I've tried 4 times. 3 times it was exactly 30 seconds with unlocking X1, once it was even faster.
I have no problems with vendors BT drivers (ACER) and I had no problems with native Win 7 drivers right after fresh install.
apolas said:
I've tried 4 times. 3 times it was exactly 30 seconds with unlocking X1, once it was even faster.
I have no problems with vendors BT drivers (ACER) and I had no problems with native Win 7 drivers right after fresh install.
Click to expand...
Click to collapse
Thank you!
try changing BT dongle it worked for me.
randolph2000 said:
try changing BT dongle it worked for me.
Click to expand...
Click to collapse
It's a Dell laptop, so BT is integrated.
As for now it has been able to get connected most of the time.
But still is strange, with Win XP Activesync 4.5, when X1 said "Connected" after all the "opening port" etc messages - it really was connected at both ends, now I don't know what the X1 thinks it's "connected" with, cause the PC is still "Connecting"...
Have you reinstalled sync soft on you computer as I told you?
hey guys
i have the same problem buy on vista 32bit i was connecting just fine but now it connects on the x1 side while the WMDC doesn't connect giving me the error sign but the sync center is connected & i can browse my phone even install programs but no syncing i've tried EVERYTHING written in forums reinstalling programs on both sides, updating drivers, removing sd card, disabling firewall & antivirus ( i have norton suite) i don't know what to do???