Database Develop

Tilt SIP Keyboard Problem

Has anyone else had the following problem? I've installed alternate keyboards (HTC, Pocket CM .12, TouchPal) and none of them seem to work. They show up in my drop down, but when I select them the Tilt will still use the default keyboard. I even tried changing it using the input selection under settings to no avail. All of the screen writing selections work fine.
Any suggestions?

try a soft reset if you haven't. or try installing to main memory

Tried multiple soft resets, reinstalling all of the above and placing in main memory.

nkawtg said:
Tried multiple soft resets, reinstalling all of the above and placing in main memory.
Click to expand...
Click to collapse
I am having the same problems. Anyone figure out a fix for this?
thanks!

Ive had the same problem... i just gave up and went on with the norm...

I've had the same problem before. I have several onscreen keyboards installed and sometimes I can't access most of them. They just go to the default onscreen keyboard. A soft reset typically fixes the problem. For a little while at least. Kinda weird.

SIP problem
the same here :/
--
hoot

maxh said:
I've had the same problem before. I have several onscreen keyboards installed and sometimes I can't access most of them. They just go to the default onscreen keyboard. A soft reset typically fixes the problem. For a little while at least. Kinda weird.
Click to expand...
Click to collapse
+1
exact same thing here with touchpal v1 and v2 as well as pocket CM keyboard, but any keyboard built into a rom seems to work fine all the time...

Got your answer
Google up IM Selector, install it to the main memory and change the SIP default in their dropdown menu. Softreset. Bam, whatever keyboard you use.

IM Selector doesn't work on my Device
I found the IM Selector on http://www.freewareppc.com/utilities/taptapkeyboard.shtml but it doesn't work on my XDA Orbit 2 (WM6). Maybe the HTC Touch Keyboard is the problem but I can't uninstall it.

Try sipchange
I installed a new IM (Calligrapher) and I experienced the same problem. My solution was to use the utility SIPchange and it worked fine for me.
You can find it here: http://www.pdagold.com/software/detail.asp?s=1312

Word suggestion doesn't appear in any keyboard - please advice

I love (so far) my HTC Diamond but there is one pretty annoying problem. It seems I cannot get word suggestions while typing and this is for any keyboard type.
Any ideas?

Same problem in the IPAQ 614c
I am having the same problem on my IPAQ 614c. I installed this file to disable to XT9 option but it did not help. It may work for you. I would love to get an answer to my problem. Many thanks.
Jay

Could you please post a link to the discussion where this file is described?

Have you played around with the T9 settings?
Start/settings/input/ (check the word completion tab here and choose your options)
Go back to unput method tab
Have compact Qwerty in the window/Options/T9 settings

unfortunately this doesn't work.

keyboard
The best is TouchPal 3.0

correction, I'm speaking about default WM keyboard not about HTC one.

Ok, do you have a Word Completion tab in your input settings?
If so, which options have you chosen?
I have tick Suggest word when entering text
Suggest after entering 4 letters
Suggest 4 words
Tick in Add space after word
Tick in Enable Auto Correct.

I'm sorry, I was wrong, I just tried this out myself, and mine isn't working either. I've never used the normal keyboard before, as it's so small, but it seems like having the Touch keyboards stops that word suggestion happening in normal keyboard. My apologies.

There seems to be a solution to this problem here: PocketCM Keyboard. Good luck! I have tried it and it works great. Awesome!

This Should Work

Diamond Keyboard problem

Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently

I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx

Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks

Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.

Same problem here, have tried everything

Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?

since day 1 my keyboard did not show predict text ? anyone can help me ?

I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.

I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.

Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...

chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?

pocket cm wont work

ok i have the Hyper Dragon rom installed
i sucessfully installed pocket cm 0.14, however when i go to settings/personal/imput/and select PCM keyboard and try to select options i get the error "PocketCM keyboard has to be the current SIP in order to configure"
other threads have solved this issue by going into messaging and changing it from the little triangle at the bottom, however when i select PCM keyboard nothing happens. i
m sure im prob doing something really stupid as usual. ideas?

I have the same problems with almost all the keyboard apps, i don't think they are compatible with 6.1. so far only 2 works that i've noticed, spb keyboard and resco keyboard but both must be bought.

sNowMaN432 said:
ok i have the Hyper Dragon rom installed
i sucessfully installed pocket cm 0.14, however when i go to settings/personal/imput/and select PCM keyboard and try to select options i get the error "PocketCM keyboard has to be the current SIP in order to configure"
other threads have solved this issue by going into messaging and changing it from the little triangle at the bottom, however when i select PCM keyboard nothing happens. i
m sure im prob doing something really stupid as usual. ideas?
Click to expand...
Click to collapse
try searching the hyperdraon thread...

Phone style keyboard fix

is there a fix to allow my phone styled keypad and compact qwerty to write letters instead of numbers. Even if the letters are selected. This makes it extemely hard to write texts when one the move as i have to use the full qwerty which now does not wish to return to letters, after inserting a new contact!
so far i have tried swithcing keyboards back and forth and a soft reset. is there a CAB to update this keyboard or anything like that.
I have tried searching but the search function returns pretty much every post with the word keyboard in it which isnt too handy!
cheers
Aaron Neal

i've had that problem with the diamond keyboard installed on my touch pro, and all i did was switch to the standard windows keyboard, and then back to the phonepad and it works fine. if you need to, you could reinstall the diamond keyboard, its on here somewhere in this forum.

ou2mame said:
i've had that problem with the diamond keyboard installed on my touch pro, and all i did was switch to the standard windows keyboard, and then back to the phonepad and it works fine. if you need to, you could reinstall the diamond keyboard, its on here somewhere in this forum.
Click to expand...
Click to collapse
i have been looking, but like i said i get every single return of 'keyboard' in the search!